OpenCores
URL https://opencores.org/ocsvn/forwardcom/forwardcom/trunk

Subversion Repositories forwardcom

[/] [forwardcom/] [trunk/] [addressgenerator.sv] - Blame information for rev 18

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 2 Agner 
//////////////////////////////////////////////////////////////////////////////////
2 
//////////////////////////////////////////////////////////////////////////////////
3 
// Engineer: Agner Fog
4 
//
5 
// Create Date:    2020-06-04
6 
// Last modified:  2021-07-17
7 
// Module Name:    decoder
8 
// Project Name:   ForwardCom soft core
9 
// Target Devices: Artix 7
10 
// Tool Versions:  Vivado v. 2020.1
11 
// License:        CERN-OHL-W v. 2 or later
12 
// Description:    Address generator. Calculates address of memory operand
13 
//
14 
//////////////////////////////////////////////////////////////////////////////////
15 
`include "defines.vh"
16 
 
17 
 
18 
module addressgenerator(
19 
    input clock,                            // system clock (100 MHz)
20 
    input clock_enable,                     // clock enable. Used when single-stepping
21 
    input reset,                            // system reset.
22 
    input valid_in,                         // data from fetch module ready
23 
    input stall_in,                         // a later stage in pipeline is stalled
24 
    input [`CODE_ADDR_WIDTH-1:0] instruction_pointer_in, // address of current instruction
25 
    input [95:0] instruction_in,            // current instruction, up to 3 words long
26 
    input [`TAG_WIDTH-1:0] tag_val_in,      // instruction tag value
27 
    input        vector_in,                 // this is a vector instruction
28 
    input [1:0]  category_in,               // 00: multiformat, 01: single format, 10: jump
29 
    input [1:0]  format_in,                 // 00: format A, 01: format E, 10: format B, 11: format C (format D never goes through decoder)
30 
    input [2:0]  rs_status_in,              // 1: RS is register operand, 2: RS is pointer, 3: RS is index, 4: RS is vector length
31 
    input [2:0]  rt_status_in,              // 1: RT is register operand, 2: RT is pointer
32 
    input [1:0]  ru_status_in,              // 1: RU is used as register operand
33 
    input [1:0]  rd_status_in,              // 1: RD is used as input
34 
    input [1:0]  mask_status_in,            // 1: mask register used
35 
    input        mask_alternative_in,       // mask register and fallback register used for alternative purposes
36 
    input [2:0]  fallback_use_in,           // 0: no fallback, 1: same as first source operand, 2-4: RU, RS, RT
37 
    input [1:0]  num_operands_in,           // number of source operands
38 
    input [1:0]  result_type_in,            // type of result: 0: register, 1: system register, 2: memory, 3: other or nothing
39 
    input [1:0]  offset_field_in,           // address offset. 0: none, 1: 8 bit, possibly scaled, 2: 16 bit, 3: 32 bit
40 
    input [1:0]  immediate_field_in,        // immediate data field. 0: none, 1: 8 bit, 2: 16 bit, 3: 32 or 64 bit
41 
    input [1:0]  scale_factor_in,           // 00: index is not scaled, 01: index is scaled by operand size, 10: index is scaled by -1
42 
    input        index_limit_in,            // IM2 or IM3 contains a limit to the index
43 
    // Register values
44 
    input [`RB:0] rd_val_in,                // value of register operand RD, bit `RB indicates missing
45 
    input [`RB:0] rs_val_in,                // value of register operand RS, bit `RB indicates missing
46 
    input [`RB:0] rt_val_in,                // value of register operand RT, bit `RB indicates missing
47 
    input [`RB:0] ru_val_in,                // value of register operand RU, bit `RB indicates missing
48 
    input [`MASKSZ:0]  regmask_val_in,      // value of mask register, bit 32 indicates missing
49 
 
50 
    // monitor result buses:
51 
    input write_en1,                        // a result is written to writeport1
52 
    input [`TAG_WIDTH-1:0] write_tag1_in,   // tag of result inwriteport1
53 
    input [`RB1:0] writeport1_in,           // result bus 1
54 
    input write_en2,                        // a result is written to writeport2
55 
    input [`TAG_WIDTH-1:0] write_tag2_in,   // tag of result inwriteport2
56 
    input [`RB1:0] writeport2_in,           // result bus 2
57 
    input [`TAG_WIDTH-1:0] predict_tag1_in, // tag on result bus 1 in next clock cycle
58 
    input [`TAG_WIDTH-1:0] predict_tag2_in, // tag on result bus 2 in next clock cycle
59 
 
60 
    // calculated read and write memory addresses go to data cache
61 
    output reg [`COMMON_ADDR_WIDTH-1:0] read_write_address_out, // address of memory operand
62 
    output reg        read_enable_out,      // read from data cache
63 
    output reg [1:0]  read_data_size_out,   // 8, 16, 32, or 64 bits read
64 
    output reg [7:0]  write_enable_out,     // write enable for each byte separately
65 
    output reg [63:0] write_data_out,       // data to write
66 
 
67 
    // instruction output to next pipeline stage
68 
    output reg        valid_out,            // An instruction is ready for output to next stage
69 
    output reg [`CODE_ADDR_WIDTH-1:0] instruction_pointer_out, // address of current instruction
70 
    output reg [63:0] instruction_out,      // first word of instruction
71 
    output reg        stall_predict_out,    // will be waiting for an operand
72 
    output reg [`TAG_WIDTH-1:0] tag_val_out,// instruction tag value
73 
 
74 
    output reg [`RB:0] operand1_out,        // value of first operand, bit `RB indicates invalid
75 
    output reg [`RB:0] operand2_out,        // value of second operand, bit `RB indicates invalid
76 
    output reg [`RB:0] operand3_out,        // value of last, bit `RB indicates valid
77 
    output reg [`MASKSZ:0]  regmask_val_out,// value of mask register, high bit indicates valid
78 
 
79 
    output reg        vector_out,           // this is a vector instruction
80 
    output reg [1:0]  category_out,         // 00: multiformat, 01: single format, 10: jump
81 
    output reg [1:0]  format_out,           // 00: format A, 01: format E, 10: format B, 11: format C (format D never goes through decoder)
82 
    output reg        mask_status_out,      // 1: mask register used
83 
    output reg        mask_alternative_out, // mask register and fallback register used for alternative purposes
84 
    output reg [2:0]  fallback_use_out,     // 0: no fallback, 1: same as first source operand, 2-4: RU, RS, RT
85 
    output reg [1:0]  num_operands_out,     // number of source operands
86 
    output reg [1:0]  result_type_out,      // type of result: 0: register, 1: system register, 2: memory, 3: other or nothing
87 
    output reg [1:0]  offset_field_out,     // address offset. 0: none, 1: 8 bit, possibly scaled, 2: 16 bit, 3: 32 bit
88 
    output reg [1:0]  immediate_field_out,  // immediate data field. 0: none, 1: 8 bit, 2: 16 bit, 3: 32 or 64 bit
89 
    output reg [1:0]  scale_factor_out,     // 00: index is not scaled, 01: index is scaled by operand size, 10: index is scaled by -1
90 
    output reg        memory_operand_out,   // The instruction has a memory operand
91 
    output reg        array_error_out,      // Array index exceeds limit
92 
    output reg        options3_out,         // IM3 containts option bits
93 
    output reg [31:0] debug1_out,           // Temporary output for debugging purpose
94 
    output reg [31:0] debug2_out,           // Temporary output for debugging purpose
95 
    output reg [31:0] debug3_out            // Temporary output for debugging purpose
96 
);
97 
 
98 
// instruction components
99 
logic [1:0]  il;                            // instruction length
100 
logic [2:0]  mode;                          // instruction mode
101 
logic        M;                             // M bit
102 
logic [5:0]  op1;                           // OP1 in instruction
103 
logic [1:0]  op2;                           // OP2 in instruction
104 
logic [2:0]  otype;                         // operand type
105 
logic [2:0]  mode2;                         // mode2 in format E
106 
logic        option_bits_im3;               // IM3 is used for option bits
107 
 
108 
// synchronization signals
109 
logic waiting;                              // waiting for needed register value
110 
logic wait_next1;                           // predict that it will also be waiting for reg1 in the next clock cycle
111 
logic wait_next2;                           // predict that it will also be waiting for reg2 in the next clock cycle
112 
logic wait_next3;                           // predict that it will also be waiting for reg3 in the next clock cycle
113 
logic address_instruction;                  // this is an address instruction. no memory access
114 
logic mask_off;                             // result is masked off
115 
logic new_instruction;                      // instruction is different from last instruction
116 
logic array_error;                          // Array index exceeds limit
117 
reg   last_stall;                           // was stalled in last clock cycle. May obtain values from the temporary registers
118 
reg   last_valid;                           // input was valid in last clock cycle
119 
reg [`TAG_WIDTH-1:0] last_tag_val;          // check if instruction tag has changed
120 
 
121 
// components of address calculation
122 
logic [`COMMON_ADDR_WIDTH-1:0] base_pointer;
123 
logic [`COMMON_ADDR_WIDTH-1:0] address_index;
124 
logic [`COMMON_ADDR_WIDTH-1:0] address_offset; // offset of memory operand
125 
logic [`COMMON_ADDR_WIDTH-1:0] address;     // address of memory operand
126 
logic [`RB1:0] write_data;                  // data to write
127 
 
128 
// register values. Extra bit is 1 if not found
129 
logic [`RB:0] rs_val;                       // value of first register operand RS, bit `RB indicates missing
130 
logic [`RB:0] rt_val;                       // value of second register operand RT, bit `RB indicates missing
131 
logic [`RB:0] ru_val;                       // value of third register operand RD or RU, bit `RB indicates missing
132 
logic [`RB:0] rd_val;                       // value of third register operand RD or RU, bit `RB indicates missing
133 
logic [`MASKSZ:0]  regmask_val;             // value of mask register, bit 32 indicates missing
134 
// temporary storage of register values if found during stall. High bit is zero if valid
135 
reg [`RB:0] rs_val_temp;                    // value of first register operand RS, bit `RB indicates missing
136 
reg [`RB:0] rt_val_temp;                    // value of second register operand RT, bit `RB indicates missing
137 
reg [`RB:0] ru_val_temp;                    // value of third register operand RD or RU, bit `RB indicates missing
138 
reg [`RB:0] rd_val_temp;                    // value of third register operand RD or RU, bit `RB indicates missing
139 
reg [`MASKSZ:0]  regmask_val_temp;          // value of mask register, bit 32 indicates missing
140 
 
141 
 
142 
always_comb begin
143 
    // components of format template
144 
    il    = instruction_in[`IL];            // instruction length
145 
    mode  = instruction_in[`MODE];          // format mode
146 
    M     = instruction_in[`M];             // extension to operand type or mode
147 
    op1   = instruction_in[`OP1];           // operation code
148 
    op2   = instruction_in[`OP2];           // operation code extension
149 
    otype = instruction_in[`OT] & {vector_in,2'b11}; // operand type
150 
    mode2 = instruction_in[`MODE2];         // format mode extension
151 
    // look for address instruction
152 
    if (il == 2 && mode == 1 && M && op1 == `II_ADDRESS_29) address_instruction = 1;
153 
    else address_instruction = 0;
154 
 
155 
    // detect use of IM3 as option bits or extra operand
156 
    option_bits_im3 = 0;
157 
    if (il == 2 && (mode == 0 || mode == 5) && mode2 == 5) begin
158 
        option_bits_im3 = 0;                // format 2.0.5 and 2.2.5 are using IM3 for an operand, not for options
159 
    end else if (category_in == `CAT_MULTI) begin
160 
        if (op1 == `II_SIGN_EXTEND_ADD || op1 == `II_COMPARE
161 
         || op1 == `II_DIV || op1 == `II_DIV_REV || op1 == `II_DIV_U
162 
         || op1 == `II_TEST_BIT || op1 == `II_TEST_BITS_AND || op1 == `II_TEST_BITS_OR
163 
         || op1 == `II_MUL_ADD_FLOAT16 || op1 == `II_MUL_ADD || op1 == `II_MUL_ADD2
164 
         || op1 == `II_ADD_ADD) begin
165 
            option_bits_im3 = 1;
166 
        end
167 
    end else if (il == 2) begin
168 
        if (((mode == 0 && !M) || mode == 2) && mode2 == 7 && op1 == `II_MOVE_BITS && op2 == `II2_MOVE_BITS)
169 
            option_bits_im3 = 1;
170 
        if (mode == 2 && mode2 == 7 && op1 == `II_MASK_LENGTH && op2 == `II2_MASK_LENGTH)
171 
            option_bits_im3 = 1;
172 
        if (((mode == 0 && !M) || mode == 2) && mode2 == 6 && op1 == `II_TRUTH_TAB3 && op2 == `II2_TRUTH_TAB3)
173 
            option_bits_im3 = 1;
174 
    end
175 
 
176 
    /* We need to prevent spill-over of values from a preceding stalled instruction
177 
    because the address generator can produce pipeline bubbles. The solution used
178 
    here is to check if the instruction tag has changed before using the _temp values.
179 
    Test case:
180 
    int64 sp -= 32
181 
    int r8 = 8
182 
    int r9 = 9
183 
    int32 [sp+0x00] = r8
184 
    int32 [sp+0x08] = r9
185 
    int32 r2 = r8 + r9
186 
    int32 [sp+0x10] = r2
187 
    */
188 
    // check if current instruction is different from last clock cycle
189 
    new_instruction = (tag_val_in != last_tag_val) && valid_in;
190 
 
191 
    // look at result buses for any missing register values
192 
    if      (last_stall && rs_val_temp[`RB] == 0 && last_valid && !new_instruction) rs_val = rs_val_temp; // obtained during stall
193 
    else if (rs_val_in[`RB] == 1 && write_en1 && rs_val_in[`TAG_WIDTH-1:0] == write_tag1_in) rs_val = {1'b0, writeport1_in}; // obtained from result bus 1
194 
    else if (rs_val_in[`RB] == 1 && write_en2 && rs_val_in[`TAG_WIDTH-1:0] == write_tag2_in) rs_val = {1'b0, writeport2_in}; // obtained from result bus 2
195 
    else rs_val = rs_val_in;
196 
 
197 
    if      (last_stall && rt_val_temp[`RB] == 0 && last_valid && !new_instruction) rt_val = rt_val_temp; // obtained during stall
198 
    else if (rt_val_in[`RB] == 1 && write_en1 && rt_val_in[`TAG_WIDTH-1:0] == write_tag1_in) rt_val = {1'b0, writeport1_in}; // obtained from result bus 1
199 
    else if (rt_val_in[`RB] == 1 && write_en2 && rt_val_in[`TAG_WIDTH-1:0] == write_tag2_in) rt_val = {1'b0, writeport2_in}; // obtained from result bus 2
200 
    else    rt_val = rt_val_in;
201 
 
202 
    if      (last_stall && ru_val_temp[`RB] == 0 && last_valid && !new_instruction) ru_val = ru_val_temp; // obtained during stall
203 
    else if (ru_val_in[`RB] == 1 && write_en1 && ru_val_in[`TAG_WIDTH-1:0] == write_tag1_in) ru_val = {1'b0, writeport1_in}; // obtained from result bus 1
204 
    else if (ru_val_in[`RB] == 1 && write_en2 && ru_val_in[`TAG_WIDTH-1:0] == write_tag2_in) ru_val = {1'b0, writeport2_in}; // obtained from result bus 2
205 
    else    ru_val = ru_val_in;
206 
 
207 
    if      (last_stall && rd_val_temp[`RB] == 0 && last_valid && !new_instruction) rd_val = rd_val_temp; // obtained during stall
208 
    else if (rd_val_in[`RB] == 1 && write_en1 && rd_val_in[`TAG_WIDTH-1:0] == write_tag1_in) rd_val = {1'b0, writeport1_in}; // obtained from result bus 1
209 
    else if (rd_val_in[`RB] == 1 && write_en2 && rd_val_in[`TAG_WIDTH-1:0] == write_tag2_in) rd_val = {1'b0, writeport2_in}; // obtained from result bus 2
210 
    else    rd_val = rd_val_in;
211 
 
212 
    if      (mask_status_in == `REG_UNUSED) regmask_val = 1;        // no mask
213 
    else if (last_stall && regmask_val_temp[`MASKSZ] == 0 && last_valid && !new_instruction) regmask_val = regmask_val_temp; // obtained during stall
214 
    else if (regmask_val_in[`MASKSZ] == 1 && write_en1 && regmask_val_in[`TAG_WIDTH-1:0] == write_tag1_in) regmask_val = {1'b0, writeport1_in[`MASKSZ-1:0]}; // obtained from result bus 1
215 
    else if (regmask_val_in[`MASKSZ] == 1 && write_en2 && regmask_val_in[`TAG_WIDTH-1:0] == write_tag2_in) regmask_val = {1'b0, writeport2_in[`MASKSZ-1:0]}; // obtained from result bus 2
216 
    else    regmask_val = regmask_val_in;
217 
end
218 
 
219 
// save values from result bus during stall
220 
always_ff @(posedge clock) if (clock_enable) begin
221 
    if ((stall_in || waiting) && valid_in ) begin
222 
        rs_val_temp      <= rs_val;              // temporary save during stall
223 
        rt_val_temp      <= rt_val;              // temporary save during stall
224 
        ru_val_temp      <= ru_val;              // temporary save during stall
225 
        rd_val_temp      <= rd_val;              // temporary save during stall
226 
        regmask_val_temp <= regmask_val;         // temporary save during stall
227 
    end else begin
228 
        rs_val_temp      <= {1'b1,`RB'b0};       // reset when not stalled
229 
        rt_val_temp      <= {1'b1,`RB'b0};       // reset when not stalled
230 
        ru_val_temp      <= {1'b1,`RB'b0};       // reset when not stalled
231 
        rd_val_temp      <= {1'b1,`RB'b0};       // reset when not stalled
232 
        regmask_val_temp <= {1'b1,`MASKSZ'b0};   // reset when not stalled
233 
    end
234 
end
235 
 
236 
 
237 
always_comb begin
238 
    // Check if result is masked off so that we don't have to wait for operands
239 
    mask_off = mask_status_in != `REG_UNUSED && !mask_alternative_in && !vector_in && regmask_val[`MASKSZ] == 0 && regmask_val[0] == 0;
240 
    waiting = 0;
241 
    wait_next1 = 0; wait_next2 = 0; wait_next3 = 0;
242 
    array_error = 0;
243 
 
244 
    // check if we need to wait for register values
245 
    if (rs_val[`RB] && rs_status_in == `REG_POINTER && !mask_off) begin
246 
        waiting = 1; // value of RS needed in this stage for address calculation. must stall
247 
        // predict if value will arrive in next clock cycle
248 
        wait_next1 = predict_tag1_in != rs_val[`TAG_WIDTH-1:0] && predict_tag2_in != rs_val[`TAG_WIDTH-1:0];
249 
    end
250 
 
251 
    if (rt_val[`RB] && rt_status_in >= `REG_INDEX && !mask_off) begin
252 
        waiting = 1; // value of RT needed in this stage for address calculation. must stall
253 
        // predict if value will arrive in next clock cycle
254 
        wait_next2 = predict_tag1_in != rt_val[`TAG_WIDTH-1:0] && predict_tag2_in != rt_val[`TAG_WIDTH-1:0];
255 
    end
256 
 
257 
    if (rd_val[`RB] && rd_status_in != 0 && result_type_in == `RESULT_MEM && !mask_off) begin
258 
        waiting = 1; // value of RD needed in this stage for writing. must stall
259 
        // predict if value will arrive in next clock cycle
260 
        wait_next3 = predict_tag1_in != rd_val[`TAG_WIDTH-1:0] && predict_tag2_in != rd_val[`TAG_WIDTH-1:0];
261 
    end
262 
 
263 
    if (regmask_val[`MASKSZ] && mask_status_in != `REG_UNUSED && result_type_in == `RESULT_MEM) begin
264 
        waiting = 1; // value of mask needed before write
265 
        // predict if value will arrive in next clock cycle
266 
        wait_next3 = predict_tag1_in != regmask_val[`TAG_WIDTH-1:0] && predict_tag2_in != regmask_val[`TAG_WIDTH-1:0];
267 
    end
268 
 
269 
 
270 
    ////////////////////////////////////////////////
271 
    //             calculate address:             //
272 
    ////////////////////////////////////////////////
273 
 
274 
    // rs is base pointer
275 
    base_pointer = rs_val[`RB1:0];
276 
 
277 
    if (rt_status_in == `REG_INDEX) begin
278 
        // rt is scaled index
279 
        if (scale_factor_in == `SCALE_OS) begin
280 
            case (otype) // operand type
281 
            `OT_INT8:                 address_index =  rt_val[`RB-1:0];       // scale factor 1
282 
            `OT_INT16:                address_index = {rt_val[`RB-2:0],1'b0}; // scale factor 2
283 
            `OT_INT32, `OT_FLOAT32:   address_index = {rt_val[`RB-3:0],2'b0}; // scale factor 4
284 
            `OT_INT64, `OT_FLOAT64:   address_index = {rt_val[`RB-4:0],3'b0}; // scale factor 8
285 
            `OT_INT128,`OT_FLOAT128:  address_index = {rt_val[`RB-5:0],4'b0}; // scale factor 16
286 
            endcase
287 
        end else if (scale_factor_in == `SCALE_MINUS) begin
288 
            address_index = -rt_val[`RB1:0];          // scale factor -1
289 
        end else begin
290 
            address_index =  rt_val[`RB1:0];          // no scale factor
291 
        end
292 
        if (index_limit_in) begin
293 
            // check index limit
294 
            if (il == 3 && rt_val[`RB1:0] > instruction_in[95:64]
295 
            ||  il == 2 && rt_val[`RB1:0] > instruction_in[`IM2E]) array_error = 1;
296 
        end
297 
 
298 
    end else begin
299 
        address_index = 0;                            // no index
300 
    end
301 
 
302 
    if (offset_field_in == `OFFSET_NONE) begin        // no offset
303 
        address_offset = 0;
304 
    end else if (offset_field_in == `OFFSET_1) begin  // 8 bit offset in IM1, scaled by operand size
305 
        case (otype) // operand type
306 
        `OT_INT8:                 address_offset = {{56{instruction_in[7]}},instruction_in[`IM1]};      // sign extend IM1
307 
        `OT_INT16:                address_offset = {{55{instruction_in[7]}},instruction_in[`IM1],1'b0}; // sign extend, scale by 2
308 
        `OT_INT32, `OT_FLOAT32:   address_offset = {{54{instruction_in[7]}},instruction_in[`IM1],2'b0}; // sign extend, scale by 4
309 
        `OT_INT64, `OT_FLOAT64:   address_offset = {{53{instruction_in[7]}},instruction_in[`IM1],3'b0}; // sign extend, scale by 8
310 
        `OT_INT128,`OT_FLOAT128:  address_offset = {{52{instruction_in[7]}},instruction_in[`IM1],4'b0}; // sign extend, scale by 16
311 
        endcase
312 
    end else if(offset_field_in == `OFFSET_2) begin                        // 16 bit offset in IM2, not scaled
313 
        address_offset = {{48{instruction_in[47]}},instruction_in[`IM2E]}; // sign extend IM2;
314 
    end else if (il == 2) begin                                            // 32 bit offset in IM2
315 
        address_offset = {{32{instruction_in[63]}},instruction_in[63:32]}; // sign extend IM2;
316 
    end else if (mode == 1 && op1 == 0) begin                              // format 3.1.0. Jump with memory offest in IM3
317 
        address_offset = {{32{instruction_in[95]}},instruction_in[95:64]}; // sign extend IM3;
318 
    end else begin                                                         // format 3.x.x, except 3.1.0
319 
        address_offset = {{32{instruction_in[95]}},instruction_in[95:64]}; // sign extend IM4;
320 
    end
321 
 
322 
    // calculated address
323 
    address = base_pointer + address_index + address_offset;
324 
 
325 
    // data to write. (mask is handled below)
326 
    if (category_in == `CAT_MULTI) begin
327 
        write_data <= rd_val;                    // write register
328 
    end else begin
329 
        write_data <= instruction_in[63:32];     // write constant
330 
    end
331 
end
332 
 
333 
 
334 
always_ff @(posedge clock) if (clock_enable) begin
335 
 
336 
    read_enable_out <= 0;
337 
    write_enable_out <= 0;
338 
 
339 
    if (valid_in && !waiting) begin
340 
 
341 
        // output memory address for data cache read and write
342 
        // must have natural alignment
343 
        read_write_address_out <= address;
344 
 
345 
        if (result_type_in == `RESULT_MEM && !mask_off && !array_error) begin
346 
 
347 
            // memory write
348 
            if (otype == `OT_INT8) begin // write 8 bits
349 
                case (address[2:0])
350 
                0: begin
351 
                    write_data_out <= write_data;
352 
                    write_enable_out <= 8'b00000001; end
353 
                1: begin
354 
                    write_data_out <= {write_data[7:0],8'b0};
355 
                    write_enable_out <= 8'b00000010; end
356 
                2: begin
357 
                    write_data_out <= {write_data[7:0],16'b0};
358 
                    write_enable_out <= 8'b00000100; end
359 
                3: begin
360 
                    write_data_out <= {write_data[7:0],24'b0};
361 
                    write_enable_out <= 8'b00001000; end
362 
                4: begin
363 
                    write_data_out <= {write_data[7:0],32'b0};
364 
                    write_enable_out <= 8'b00010000; end
365 
                5: begin
366 
                    write_data_out <= {write_data[7:0],40'b0};
367 
                    write_enable_out <= 8'b00100000; end
368 
                6: begin
369 
                    write_data_out <= {write_data[7:0],48'b0};
370 
                    write_enable_out <= 8'b01000000; end
371 
                7: begin
372 
                    write_data_out <= {write_data[7:0],56'b0};
373 
                    write_enable_out <= 8'b10000000; end
374 
                endcase
375 
 
376 
            end else if (otype == `OT_INT16) begin // write 16 bits
377 
                case (address[2:1])
378 
                0: begin
379 
                    write_data_out <= write_data;
380 
                    write_enable_out <= 8'b00000011; end
381 
                1: begin
382 
                    write_data_out <= {write_data[15:0],16'b0};
383 
                    write_enable_out <= 8'b00001100; end
384 
                2: begin
385 
                    write_data_out <= {write_data[15:0],32'b0};
386 
                    write_enable_out <= 8'b00110000; end
387 
                3: begin
388 
                    write_data_out <= {write_data[15:0],48'b0};
389 
                    write_enable_out <= 8'b11000000; end
390 
                endcase
391 
 
392 
            end else if (otype == `OT_INT32 || otype == `OT_FLOAT32) begin // write 32 bits
393 
                case (address[2])
394 
                0: begin
395 
                    write_data_out <= write_data;
396 
                    write_enable_out <= 8'b00001111; end
397 
                1: begin
398 
                    write_data_out <= {write_data[31:0],32'b0};
399 
                    write_enable_out <= 8'b11110000; end
400 
                endcase
401 
 
402 
            end else begin // write 64 bits (or more)
403 
                write_data_out <= write_data;
404 
                write_enable_out <= 8'b11111111;
405 
            end
406 
 
407 
        end else if (rs_status_in == `REG_POINTER && !address_instruction) begin
408 
 
409 
            // memory read. Must have natural alignment
410 
            read_enable_out <= valid_in && !mask_off && !array_error;
411 
            write_enable_out <= 0;
412 
            case (otype)
413 
            `OT_INT8:    read_data_size_out <= `OT_INT8;
414 
            `OT_INT16:   read_data_size_out <= `OT_INT16;
415 
            `OT_INT32,
416 
            `OT_FLOAT32: read_data_size_out <= `OT_INT32;
417 
            default:     read_data_size_out <= `OT_INT64;
418 
            endcase
419 
 
420 
        end
421 
 
422 
        // sort operand values, selected by the priority order: immediate, memory, rt, rs, ru, rd
423 
        operand1_out <= 0;    // value of first operand,  bit `RB indicates invalid
424 
        operand2_out <= 0;    // value of second operand, bit `RB indicates invalid
425 
        operand3_out <= 0;    // value of last operand,   bit `RB indicates invalid
426 
 
427 
        if (immediate_field_in != `IMMED_NONE && rs_status_in == `REG_POINTER) begin
428 
            // both memory and immediate operands.
429 
            // Last operand is an immediate value calculated below.
430 
            // Next to last operand is a memory operand retrieved later.
431 
            // Find remaining register operand
432 
            if      (rt_status_in == `REG_OPERAND) operand1_out <= rt_val;
433 
            else if (ru_status_in == `REG_OPERAND) operand1_out <= ru_val;
434 
            else if (rd_status_in == `REG_OPERAND) operand1_out <= rd_val;
435 
 
436 
        end else if (immediate_field_in != `IMMED_NONE || rs_status_in == `REG_POINTER) begin
437 
            // Last operand is an immediate value calculated below or a memory operand retrieved later.
438 
            // Find remaining register operands
439 
            if  (rt_status_in == `REG_OPERAND) begin
440 
                operand2_out <= rt_val;
441 
                if      (rs_status_in == `REG_OPERAND) operand1_out <= rs_val;
442 
                else if (ru_status_in == `REG_OPERAND) operand1_out <= ru_val;
443 
                else if (rd_status_in == `REG_OPERAND) operand1_out <= rd_val;
444 
                else operand1_out <= rt_val;  // possible fallback
445 
            end else if (rs_status_in == `REG_OPERAND || rs_status_in == `REG_SYSTEM) begin
446 
                operand2_out <= rs_val;
447 
                if      (ru_status_in == `REG_OPERAND) operand1_out <= ru_val;
448 
                else if (rd_status_in == `REG_OPERAND) operand1_out <= rd_val;
449 
                else operand1_out <= rs_val; // possible fallback_use_in == `FALLBACK_RS
450 
            end else if (ru_status_in == `REG_OPERAND) begin
451 
                operand2_out <= ru_val;
452 
                if      (rd_status_in == `REG_OPERAND) operand1_out <= rd_val;
453 
                else operand1_out <= ru_val;
454 
            end else if (rd_status_in == `REG_OPERAND) begin
455 
                operand2_out <= rd_val;
456 
                operand1_out <= rd_val;
457 
            end
458 
        end else begin
459 
            // last operand is a register
460 
            if  (rt_status_in == `REG_OPERAND) begin
461 
                operand3_out <= rt_val;
462 
                if  (rs_status_in == `REG_OPERAND) begin
463 
                    operand2_out <= rs_val;
464 
                    if      (ru_status_in == `REG_OPERAND) operand1_out <= ru_val;
465 
                    else if (rd_status_in == `REG_OPERAND) operand1_out <= rd_val;
466 
                    else operand1_out <= rs_val;
467 
                end else if (ru_status_in == `REG_OPERAND) begin
468 
                    operand2_out <= ru_val;
469 
                    if      (rd_status_in == `REG_OPERAND) operand1_out <= rd_val;
470 
                    else operand1_out <= ru_val;
471 
                end else if (rd_status_in == `REG_OPERAND) begin
472 
                    operand2_out <= rd_val;
473 
                    operand1_out <= rd_val;
474 
                end
475 
            end else if (rs_status_in == `REG_OPERAND) begin
476 
                operand3_out <= rs_val;
477 
                if  (ru_status_in == `REG_OPERAND) begin
478 
                    operand2_out <= ru_val;
479 
                    if (rd_status_in == `REG_OPERAND) operand1_out <= rd_val;
480 
                    else operand1_out <= ru_val;
481 
                end else if (rd_status_in == `REG_OPERAND) begin
482 
                    operand2_out <= rd_val;
483 
                    operand1_out <= rd_val;
484 
                end
485 
            end else if (ru_status_in == `REG_OPERAND) begin // should not occur
486 
                operand3_out <= ru_val;
487 
                if  (rd_status_in == `REG_OPERAND) begin
488 
                    operand2_out <= rd_val;
489 
                    operand1_out <= rd_val;
490 
                end else begin
491 
                    operand1_out <= ru_val;
492 
                end
493 
            end else if (rd_status_in == `REG_OPERAND) begin
494 
                operand3_out <= rd_val;
495 
                operand1_out <= rd_val;
496 
            end
497 
        end
498 
 
499 
        // look for immediate operand, and process it if necessary
500 
        if (immediate_field_in != `IMMED_NONE) begin
501 
            if (immediate_field_in == `IMMED_1) begin  // sign_extend 8 bit immediate operand
502 
                if (format_in == `FORMAT_E) begin
503 
                    operand3_out <= {{(`RB-8){instruction_in[`IM3EXS]}},instruction_in[`IM3EX]};
504 
                end else if (format_in == `FORMAT_C && category_in == `CAT_JUMP) begin
505 
                    // jump in format 1.7C and 2.5.4C
506 
                    operand3_out <= {{(`RB-8){instruction_in[15]}},instruction_in[15:8]};
507 
                end else begin   // format B
508 
                    operand3_out <= {{(`RB-8){instruction_in[`IM1S]}},instruction_in[`IM1]};
509 
                end
510 
            end
511 
            if (immediate_field_in == `IMMED_2) begin // sign_extend 16 bit immediate operand
512 
                if (format_in == `FORMAT_C) begin     // format C: sign extend (IM2,IM1)
513 
                    operand3_out <= {{(`RB-16){instruction_in[15]}},instruction_in[15:0]};
514 
                    // special cases
515 
                    if (mode == 1) begin
516 
                        if (op1 == `II_MOVEU11) operand3_out <= instruction_in[15:0]; // zero extended
517 
                        if (op1 == `II_ADDSHIFT16_11) begin
518 
                            `ifdef SUPPORT_64BIT
519 
                                operand3_out <= {{(`RB-32){instruction_in[15]}},instruction_in[15:0],16'b0}; // shift left by 16
520 
                            `else
521 
                                operand3_out <= {instruction_in[15:0],16'b0}; // shift left by 16
522 
                            `endif
523 
                        end
524 
                        if ((op1 & -2) == `II_SHIFT_MOVE_11 || op1 >= `II_SHIFT_ADD_11 && op1 <= `II_SHIFT_XOR_11+1) begin // IM2 << IM1
525 
                            if (instruction_in[`IM1] >= 64) operand3_out <= 0;
526 
                            else operand3_out <= {{(`RB-8){instruction_in[15]}},instruction_in[15:8]} << instruction_in[5:0];
527 
                        end
528 
                    end
529 
                end else begin
530 
                    operand3_out <= {{(`RB-16){instruction_in[`IM2ES]}},instruction_in[`IM2E]};
531 
                    // special cases
532 
                    if (il == 2 && ((mode == 0 && !M) || mode == 2) && mode2 == 7 && !option_bits_im3) begin
533 
                         // format 2.0.7 and 2.2.7 have shift
534 
                        operand3_out <= {{(`RB-16){instruction_in[47]}},instruction_in[`IM2E]} << instruction_in[`IM3E];
535 
                    end
536 
                end
537 
            end
538 
            if (immediate_field_in == `IMMED_3) begin
539 
                `ifdef SUPPORT_64BIT
540 
                if (il == 3 && ((mode == 0 && !M) || mode == 2) && mode2 == 7 && otype < `OT_FLOAT32) begin
541 
                     // format 3.0.7 and 3.2.7 have shift
542 
                    operand3_out <= {{32{instruction_in[95]}},instruction_in[95:64]} << instruction_in[`IM2E];
543 
                end else if (il == 3 && format_in == `FORMAT_E) begin
544 
                    // other format 3E
545 
                    operand3_out <= {{32{instruction_in[95]}},instruction_in[95:64]};
546 
                end else if (il == 3 && mode == 0 && M) begin
547 
                    // format 3.8
548 
                    operand3_out <= instruction_in[95:32];
549 
                end else begin
550 
                    // format 2.x
551 
                    operand3_out <= {{32{instruction_in[63]}},instruction_in[63:32]};
552 
                end
553 
                `else
554 
                if (((mode == 0 && !M) || mode == 2) && mode2 == 7 && otype < `OT_FLOAT32) begin
555 
                     // format 3.0.7 and 3.2.7 have shift
556 
                    operand3_out <= instruction_in[95:64] << instruction_in[`IM2E];
557 
                end else if (il == 3 && format_in == `FORMAT_E) begin
558 
                    operand3_out <= instruction_in[95:64];
559 
                end else begin
560 
                    operand3_out <= instruction_in[63:32];
561 
                end
562 
                `endif
563 
 
564 
                // special cases
565 
                if (il == 2 && mode == 1 && M) begin
566 
                    if (op1 == `II_ADDU_29 || op1 == `II_SUBU_29) begin
567 
                        operand3_out <= instruction_in[63:32]; // zero extend
568 
                    end
569 
                    if (op1 == `II_MOVE_HI_29 || (op1 >= `II_ADD_HI_29 && op1 <= `II_XOR_HI_29)) begin
570 
                        // immediate constant is high word of 64 bits
571 
                        `ifdef SUPPORT_64BIT
572 
                            operand3_out <= {instruction_in[63:32],32'b0}; // high word
573 
                        `else
574 
                            operand3_out <= 0; // there is no high word
575 
                        `endif
576 
                    end
577 
                end
578 
            end
579 
            //if (category_in == `CAT_JUMP) begin // unnecessary check
580 
            if (il == 2 && mode == 5) begin
581 
                // immediate operands in jump instructions 2.5.x
582 
                if (op1 == 0) begin
583 
                    // format 2.5.0A: jump with three registers, and 24 bit jump offset, no immediate
584 
                end else if (op1 == 1) begin
585 
                    // format 2.5.1B: jump with one register, one 16 bit operand, and 16 bit jum offset
586 
                    operand3_out <= {{48{instruction_in[47]}},instruction_in[47:32]}; // sign extend 16 bit operand
587 
                end else if (op1 == 4) begin
588 
                    // format 2.5.4C: jump with one register, one 8 bit operand, and 32 bit offset
589 
                    operand3_out <= {{56{instruction_in[15]}},instruction_in[15:8]}; // sign extend 8 bit operand
590 
                end else if (op1 == 5) begin
591 
                    // format 2.5.5: jump with one register, one 32 bit operand, and 8 bit offset
592 
                    operand3_out <= {{32{instruction_in[63]}},instruction_in[63:32]}; // sign extend 32 bit operand
593 
                end else if (op1 == 7) begin
594 
                    // format 2.5.7: system call. 16 bit and 32 bit constants
595 
                    operand3_out <= {instruction_in[63:32],16'b0,instruction_in[15:0]}; // 32 bit module ID, 16 bit function ID
596 
                end
597 
            end
598 
            if (il == 3 && mode == 1) begin
599 
                // immedate operands in jump instructions 3.1.x
600 
                if (op1 == 0) begin
601 
                    // format 3.1.0: jump with memory operand and 32 bit offset. no immediate
602 
                end else if (op1 == 1) begin // && op1 == `IJ_SYSCALL
603 
                    // jump format 3.1.1
604 
                    if (instruction_in[5:0] < `IJ_SYSCALL) begin
605 
                        operand3_out <= instruction_in[95:64];
606 
                    end else begin
607 
                        // format 3.1.1: system call with 32 bit module ID and 32 bit function ID
608 
                        `ifdef  SUPPORT_64BIT
609 
                            operand3_out <= instruction_in[95:32];
610 
                        `else
611 
                            operand3_out <= {instruction_in[79:64],instruction_in[47:32]};
612 
                        `endif
613 
                    end
614 
                end
615 
            end
616 
            operand3_out[`RB] <= 0;    // indicate not missing
617 
        end
618 
 
619 
        if (address_instruction) begin
620 
            operand3_out <= address;   // address instruction
621 
        end
622 
 
623 
        if (fallback_use_in > `FALLBACK_SOURCE) begin
624 
            // separate fallback register. Check if fallback zero
625 
            if (fallback_use_in == `FALLBACK_RU && instruction_in[`RU] == 31) operand1_out <= 0;
626 
            if (fallback_use_in == `FALLBACK_RS && instruction_in[`RS] == 31) operand1_out <= 0;
627 
            if (fallback_use_in == `FALLBACK_RT && instruction_in[`RT] == 31) operand1_out <= 0;
628 
        end
629 
 
630 
        // output everything else
631 
        regmask_val_out      <= regmask_val;
632 
        instruction_pointer_out <= instruction_pointer_in;    // address of current instruction
633 
        instruction_out      <= instruction_in[63:0];         // first two words of instruction
634 
        tag_val_out          <= tag_val_in;                   // instruction tag value
635 
        vector_out           <= vector_in;                    // this is a vector instruction
636 
        category_out         <= category_in;                  // 00: multiformat, 01: single format, 10: jump
637 
        format_out           <= format_in;                    // 00: format A, 01: format E, 10: format B, 11: format C (format D never goes through decoder)
638 
        mask_status_out      <= mask_status_in == `REG_OPERAND;// mask register is used
639 
        mask_alternative_out <= mask_alternative_in;          // mask register and fallback register used for alternative purposes
640 
        fallback_use_out     <= fallback_use_in;              // use of fallback register
641 
        num_operands_out     <= num_operands_in;              // number of source operands
642 
        result_type_out      <= result_type_in;               // type of result: 0: register, 1: system register, 2: memory, 3: other or nothing
643 
        offset_field_out     <= offset_field_in;              // address offset. 0: none, 1: 8 bit, possibly scaled, 2: 16 bit, 3: 32 bit
644 
        immediate_field_out  <= immediate_field_in;           // immediate data field. 0: none, 1: 8 bit, 2: 16 bit, 3: 32 or 64 bit
645 
        scale_factor_out     <= scale_factor_in;              // 00: index is not scaled, 01: index is scaled by operand size, 10: index is scaled by -1
646 
        memory_operand_out   <= (rs_status_in >= `REG_POINTER) && !address_instruction; // The instruction has a memory operand
647 
        array_error_out      <= array_error;                  // Array index exceeds limit;
648 
        options3_out         <= option_bits_im3;              // IM3 used for option bits
649 
    end
650 
 
651 
end
652 
 
653 
 
654 
always_ff @(posedge clock) if (clock_enable) begin
655 
    last_stall <= (stall_in || waiting) && valid_in;
656 
    last_valid <= valid_in;
657 
    stall_predict_out <= (wait_next1 | wait_next2 | wait_next3) && valid_in; // predict stalling in next clock cycle
658 
    last_tag_val <= tag_val_in;
659 
 
660 
    if (reset) begin
661 
        valid_out  <= 0;
662 
    end else begin
663 
        // avoid sending an instruction that is not ready, or an instruction that has already been sent
664 
        valid_out  <= valid_in && !waiting && !stall_in && (new_instruction | !valid_out);
665 
    end
666 
 
667 
    // temporary debug outputs
668 
    debug1_out <=  {address_offset[7:0], address_index[7:0], base_pointer[15:0]};
669 
    debug2_out <=  write_data;
670 
 
671 
    debug3_out[0] <= waiting;
672 
    debug3_out[1] <= stall_in;
673 
    debug3_out[2] <= last_stall;
674 
 
675 
    debug3_out[4] <= wait_next1;
676 
    debug3_out[5] <= wait_next2;
677 
    debug3_out[6] <= wait_next3;
678 
 
679 
    debug3_out[8]  <= rs_val[`RB] && (rs_status_in >= `REG_POINTER) && !mask_off;
680 
    debug3_out[9]  <= rt_val[`RB] && (rt_status_in >= `REG_INDEX) && !mask_off;
681 
    debug3_out[10] <= rd_val[`RB] && (rd_status_in != 0)&& result_type_in == `RESULT_MEM && !mask_off;
682 
    debug3_out[11] <= new_instruction;
683 
 
684 
    debug3_out[12] <= valid_in;
685 
    debug3_out[14] <= valid_out; // preceding valid out
686 
    debug3_out[15] <= last_valid;
687 
 
688 
    debug3_out[16] <= rs_val[`RB];
689 
    debug3_out[17] <= rt_val[`RB];
690 
    debug3_out[18] <= rd_val[`RB];
691 
 
692 
    debug3_out[20] <= rs_val_temp[`RB];
693 
    debug3_out[21] <= rt_val_temp[`RB];
694 
    debug3_out[22] <= rd_val_temp[`RB];
695 
 
696 
    debug3_out[24] <= write_en1 && rt_val_in[`TAG_WIDTH-1:0] == write_tag1_in;
697 
    debug3_out[25] <= write_en2 && rt_val_in[`TAG_WIDTH-1:0] == write_tag2_in;
698 
    debug3_out[26] <= write_en1 && rd_val_in[`TAG_WIDTH-1:0] == write_tag1_in;
699 
    debug3_out[27] <= write_en2 && rd_val_in[`TAG_WIDTH-1:0] == write_tag2_in;
700 
 
701 
    debug3_out[28] <= option_bits_im3;
702 
    debug3_out[31] <= mask_off;
703 
 
704 
end
705 
 
706 
endmodule

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.