OpenCores
URL https://opencores.org/ocsvn/forwardcom/forwardcom/trunk

Subversion Repositories forwardcom

[/] [forwardcom/] [trunk/] [decoder.sv] - Blame information for rev 89

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 23 Agner 
//////////////////////////////////////////////////////////////////////////////////
2 
// Engineer: Agner Fog
3 
//
4 
// Create Date:    2020-05-30
5 
// Last modified:  2021-07-11
6 
// Module Name:    decoder
7 
// Project Name:   ForwardCom soft core
8 
// Target Devices: Artix 7
9 
// Tool Versions:  Vivado v. 2020.1
10 
// License:        CERN-OHL-W v. 2 or later
11 
// Description:    Instruction decoder. Identifies instruction category and format,
12 
// Loads register parameters. Generates multiple µops for push and pop instructions
13 
//
14 
//////////////////////////////////////////////////////////////////////////////////
15 
`include "defines.vh"
16 
 
17 
// To do:
18 
// Push and pop instructions generate multiple µops in the decoder.
19 
 
20 
module decoder (
21 
    input clock,                            // system clock (100 MHz)
22 
    input clock_enable,                     // clock enable. Used when single-stepping
23 
    input reset,                            // system reset.
24 
    input valid_in,                         // data from fetch module ready
25 
    input stall_in,                         // a later stage in pipeline is stalled
26 
    input [`CODE_ADDR_WIDTH-1:0] instruction_pointer_in, // address of current instruction
27 
    input [95:0] instruction_in,            // current instruction, up to 3 words long
28 
    // monitor tags written to register file:
29 
    input write_en1,                        // a result is written to writeport1
30 
    input [`TAG_WIDTH-1:0] write_tag1,      // tag of result inwriteport1
31 
    input write_en2,                        // a result is written to writeport2
32 
    input [`TAG_WIDTH-1:0] write_tag2,      // tag of result inwriteport2
33 
    output reg        valid_out,            // An instruction is ready for output to next stage
34 
    output reg [`CODE_ADDR_WIDTH-1:0] instruction_pointer_out, // address of current instruction
35 
    output reg [95:0] instruction_out,      // first word of instruction
36 
    output reg        stall_out,            // Not ready to receive next instruction
37 
    output reg [5:0]  tag_a_out,            // register number for instruction tag
38 
    output reg [`TAG_WIDTH-1:0] tag_val_out,// instruction tag value
39 
    output reg        tag_write_out,        // instruction tag write enable
40 
    output reg        vector_out,           // this is a vector instruction
41 
    output reg [1:0]  category_out,         // 00: multiformat, 01: single format, 10: jump
42 
    output reg [1:0]  format_out,           // 00: format A, 01: format E, 10: format B, 11: format C (format D never goes through decoder)
43 
    output reg [2:0]  rs_status_out,        // what RS is used for
44 
    output reg [2:0]  rt_status_out,        // what RT is used for
45 
    output reg [1:0]  ru_status_out,        // what RU is used for
46 
    output reg [1:0]  rd_status_out,        // what RD is used for
47 
    output reg [1:0]  mask_status_out,      // what the mask register is used for
48 
    output reg        mask_options_out,     // mask register may contain option bits
49 
    output reg        mask_alternative_out, // mask register and fallback register used for alternative purposes
50 
    output reg [2:0]  fallback_use_out,     // 0: no fallback, 1: same as first source operand, 2-4: RU, RS, RT
51 
    output reg [1:0]  num_operands_out,     // number of source operands
52 
    output reg [1:0]  result_type_out,      // type of result: 0: register, 1: system register, 2: memory, 3: other or nothing
53 
    output reg [1:0]  offset_field_out,     // address offset. 0: none, 1: 8 bit, possibly scaled, 2: 16 bit, 3: 32 bit
54 
    output reg [1:0]  immediate_field_out,  // immediate data field. 0: none, 1: 8 bit, 2: 16 bit, 3: 32 or 64 bit
55 
    output reg [1:0]  scale_factor_out,     // 00: index is not scaled, 01: index is scaled by operand size, 10: index is scaled by -1
56 
    output reg        index_limit_out,      // The field indicated by offset_field contains a limit to the index
57 
    output reg [31:0] debug1_out            // Temporary output for debugging purpose
58 
);
59 
 
60 
logic [1:0]  register_type;                 // 1: general purpose registers, 2: vector registers
61 
logic [1:0]  category;                      // 00: multiformat, 01: single format, 10: jump
62 
logic [1:0]  format;                        // 00: format A, 01: format E, 10: format B, 11: format C (format D never goes through decoder)
63 
 
64 
logic [1:0]  num_operands;                  // number of source operands
65 
logic [2:0]  rs_status;                     // use of RS register
66 
logic [2:0]  rt_status;                     // use of RT register
67 
logic [1:0]  ru_status;                     // use of RU register
68 
logic [1:0]  rd_status;                     // use of RD register for input
69 
logic        mask_used;                     // 1: mask register is used
70 
logic        mask_options;                  // mask register may contain options
71 
logic [2:0]  fallback_use;                  // 0: no fallback, 1: same as first source operand, 2-4: RU, RS, RT
72 
logic [1:0]  scale_factor;                  // 00: index is not scaled, 01: index is scaled by operand size, 10: index is scaled by -1
73 
logic [1:0]  offset_field;                  // address offset. 0: none, 1: 8 bit, possibly scaled, 2: 16 bit, 3: 32 bit
74 
logic [1:0]  immediate_field;               // immediate data field. 0: none, 1: 8 bit, 2: 16 bit, 3: 32 or 64 bit
75 
logic        index_limit;                   // The field indicated by offset_field contains a limit to the index
76 
logic        broadcast;                     // Broadcast scalar memory operand or immediate operand
77 
logic [1:0]  result_type;                   // type of result: 0: register, 1: system register, 2: memory, 3: other or nothing
78 
logic        format_error;                  // unknown or unsupported instruction format
79 
logic        tag_write;                     // a tag is written
80 
logic        tag_error;                     // unpredicted tag error
81 
logic [1:0]  il;                            // instruction length
82 
logic [2:0]  mode;                          // instruction mode
83 
logic [5:0]  op1;                           // OP1 in instruction
84 
logic        M;                             // M bit
85 
logic [1:0]  op2;                           // OP2 in E format
86 
logic [2:0]  mode2;                         // mode2 in E format
87 
logic        valid;                         // valid output is ready
88 
logic        mask_alternative;              // mask register and fallback register used for alternative purposes
89 
integer signed count_inputs;                // calculate whether RD and RU are needed for input operands
90 
 
91 
reg [`TAG_WIDTH-1:0]      current_tag = 1;  // sequential instruction tags
92 
reg [(2**`TAG_WIDTH)-1:0] tag_used = 0;     // remember which tags are in use
93 
logic [`TAG_WIDTH-1:0]    next_tag;         // next instruction tags
94 
 
95 
// analyze instruction
96 
always_comb begin
97 
    il   = instruction_in[`IL];
98 
    mode = instruction_in[`MODE];
99 
    op1  = instruction_in[`OP1];
100 
    M    = instruction_in[`M];
101 
    op2  = instruction_in[`OP2];
102 
    mode2 = instruction_in[`MODE2];
103 
    num_operands = 2;
104 
    ru_status = 0;
105 
    rd_status = 0;
106 
    mask_used = 0;
107 
    mask_options = 0;
108 
    mask_alternative = 0;
109 
    format_error = 0;
110 
    valid = valid_in & !reset;
111 
 
112 
    // detect instruction format: A, B, C, or E (format D never comes to the decoder)
113 
    if (il == 0) begin // format 0.x
114 
        if (mode == 1 || mode == 3 || mode == 7) begin
115 
            format = `FORMAT_B;        // 0.1, 0.3, 0.7, 0.9
116 
        end else begin
117 
            format = `FORMAT_A;        // 0.0, 0.2, 0.4, 0.5, 0.6, 0.8
118 
        end
119 
 
120 
    end else if (il == 1) begin        // format 1.x
121 
        if (mode == 3 || (mode == 0 && M)) begin
122 
            format = `FORMAT_B;        // 1.3, 1.8
123 
        end else if (mode == 6) begin  // 1.6 jump instructions
124 
            if (op1 == `II_RETURN) format = `FORMAT_C;  // return
125 
            else if (op1 >= `II_JUMP_RELATIVE) begin
126 
                format = `FORMAT_A;    // relative jump, sys_call
127 
            end else format = `FORMAT_B;
128 
        end else if (mode == 1 || mode == 4 || mode == 7) begin
129 
            format = `FORMAT_C;        //1.1, 1.4, 1.7
130 
        end else begin
131 
            format = `FORMAT_A;        // 1.0, 1.2
132 
        end
133 
 
134 
    end else if (il == 2) begin        // format 2.x
135 
        if ((mode == 0 && M == 0) || mode == 2) begin
136 
            format = `FORMAT_E;        // 2.0.x, 2.2.x
137 
 
138 
        end else if (mode == 5) begin  // format 2.5 mixed
139 
            if (op1 == 0)      format = `FORMAT_A; // jump format 2.5.0A
140 
            else if (op1 <= 3) format = `FORMAT_B; // jump format 2.5.1B, 2.5.2B
141 
            else if (op1 <= 7) format = `FORMAT_C; // jump format 2.5.4C - 2.5.7C
142 
            else if (op1 >= `II_25_VECT) format = `FORMAT_A;  // 2.5 32-63 vector instructions
143 
            else format = `FORMAT_B;   // other miscellaneous instructions
144 
 
145 
        end else begin
146 
            format = `FORMAT_A;        // other formats 2.x
147 
        end
148 
 
149 
    end else begin // format 3.x
150 
        if ((mode == 0 && M == 0) || mode == 2) begin
151 
            format = `FORMAT_E;        // 3.0.x, 3.2.x
152 
        end else if (mode == 1) begin  // 3.1 mixed
153 
            if (op1 > 0 && op1 < 8) begin // jump instructions 3.1.1 - 3.1.7
154 
                format = `FORMAT_B;
155 
            end else begin
156 
                format = `FORMAT_A;
157 
            end
158 
        end else begin
159 
            format = `FORMAT_A;
160 
        end
161 
    end
162 
 
163 
    // detect category, 00: multiformat, 01: single format, 10: jump
164 
    // (this differs from the category numbers in instruction_list.cvs)
165 
    if (il == 0) begin // format 0.x
166 
        category = `CAT_MULTI;
167 
 
168 
    end else if (il == 1) begin             // format 1.x
169 
        if (mode == 6 || mode == 7) begin   // format 1.6 and 1.7
170 
            category = `CAT_JUMP;
171 
        end else begin
172 
            category = `CAT_SINGLE;
173 
        end
174 
 
175 
    end else if (il == 2 && ((mode == 0 && !M) || mode == 2) && op2 != 0 && mode2 != 5) begin
176 
        // op2 > 0 in format 2.0.x, 2.2.x, except 2.0.5, 2.2.5
177 
        category = `CAT_SINGLE;
178 
 
179 
    end else if (il == 3 && ((mode == 0 && !M) || mode == 2) && op2 != 0) begin
180 
        // op2 > 0 in format 3.0.x, 3.2.x
181 
        category = `CAT_SINGLE;
182 
 
183 
    end else if (il == 2) begin             // format 2.x
184 
        if (mode == 1 && M) begin           // format 2.9
185 
            category = `CAT_SINGLE;
186 
        end else if (mode == 6 || mode == 7) begin // format 2.6 - 2.7
187 
            category = `CAT_SINGLE;
188 
        end else if (mode == 5) begin       // format 2.5
189 
            if (op1 < 8) begin
190 
                category = `CAT_JUMP;
191 
            end else begin
192 
                category = `CAT_SINGLE;
193 
            end
194 
        end else begin
195 
            category = `CAT_MULTI;
196 
        end
197 
 
198 
    end else begin                          // format 3.x
199 
        if (mode == 1) begin                // format 3.1
200 
            if (op1 < 8) begin
201 
                category = `CAT_JUMP;
202 
            end else begin
203 
                category = `CAT_SINGLE;
204 
            end
205 
        end else begin
206 
            category = `CAT_MULTI;
207 
        end
208 
    end
209 
 
210 
    // is this a vector instruction?
211 
    register_type = `REG_OPERAND;
212 
    if (category == `CAT_JUMP) begin
213 
        if (M && format != `FORMAT_C) register_type = `REG_VECTOR;
214 
    end else if (il == 2 && mode == 5) begin // 2.5 mixed
215 
        if (op1 >= `II_25_VECT) register_type = `REG_VECTOR;
216 
    end else if (il == 3 && mode == 1) begin // 3.1 mixed
217 
        if (op1 >= `II_31_VECT) register_type = `REG_VECTOR;
218 
    end else if (mode >= 2) begin
219 
        register_type = `REG_VECTOR;
220 
    end
221 
 
222 
    // count number of operands and mask use
223 
    if (category == `CAT_MULTI) begin
224 
        if (op1 == `II_NOP) num_operands = 0;
225 
        else if (op1 <= `II_ONE_OP) num_operands = 1;
226 
        else if (op1 >= `II_3OP_FIRST && op1 <= `II_3OP_LAST) begin
227 
            num_operands = 3;
228 
            // There are currently no g.p. instructions that have option bits in a mask register.
229 
            // To do: Set mask_options for relevant floating point instructions
230 
            // if (format != `FORMAT_A && format != `FORMAT_E) mask_options = 1;
231 
        end
232 
        if ((format == `FORMAT_E || format == `FORMAT_A) && (op1 == `II_COMPARE || op1 == `II_TEST_BIT || op1 == `II_TEST_BITS_AND || op1 == `II_TEST_BITS_OR)) begin
233 
            mask_alternative = 1; // these instructions allow alternative use of mask register and fallback register
234 
        end
235 
        /* This is done in address generator:
236 
        if (format == `FORMAT_E && op1 >= `II_MUL_ADD_FLOAT16 && op1 <= `II_ADD_ADD) begin
237 
            options_im3 = 1;   // IM3 contains option bits, not shift count
238 
        end*/
239 
    end else if (il == 1 && mode == 1) begin               // format 1.1 C (don't check M because there is no M bit in format C)
240 
        if (op1 <= `II_MOVE11_LAST) num_operands = 1;      // move
241 
 
242 
    end else if (il == 1 && mode == 2) begin               // format 1.2 A
243 
        if (op1 <= `II_GETNUM_12) num_operands = 1;
244 
        if (op1 == `II_OUTPUT_18) num_operands = 3;        // output instruction
245 
 
246 
    end else if (il == 1 && mode == 0 && M) begin          // format 1.8
247 
        if (op1 == `II_VECTORS_USED) num_operands = 0;     // vectors_used instruction
248 
        if (op1 == `II_OUTPUT_18)  num_operands = 3;       // output instruction
249 
 
250 
    end else if (il == 2 && mode == 6) begin               // format 2.6 A
251 
        if (op1 == `II_LOAD_HI_26) num_operands = 1;       // load_hi instruction
252 
 
253 
    end else if (il == 2 && mode == 1 && M) begin          // format 2.9 A
254 
        if (op1 == `II_MOVE_HI_29 || op1 == `II_ADDRESS_29) num_operands = 1; // mov or address instruction
255 
 
256 
    end else if (il == 2 && (mode == 0 && !M || mode == 2)) begin // format 2.0.x, 2.2.x
257 
        if (mode2 == 6 && op1 == `II_TRUTH_TAB3 && op2 == `II2_TRUTH_TAB3) begin
258 
            num_operands = 3;                              // truth_tab3. 3 operands
259 
        end
260 
        if (mode2 == 7 && op1 == `II_MOVE_BITS && op2 == `II2_MOVE_BITS) begin
261 
            num_operands = 3;                              // move_bits. 3 operands (Actually 5 operands: IM2 contains two 6-bit constants, IM3 contains the last operand)
262 
        end
263 
 
264 
    end else if (category == `CAT_JUMP) begin
265 
        if (il == 1 && mode == 6) begin
266 
            if (op1 >> 1 == `IJ_JUMP_INDIRECT_MEM >> 1) num_operands = 1;
267 
            else if (op1 >> 1 == `IJ_RETURN >> 1) num_operands = 0;
268 
 
269 
        end else if (il == 1 && mode == 7) begin
270 
            if (op1 >> 1 == `IJ_JUMP_INDIRECT_REG >> 1) num_operands = 1;
271 
            else if (op1 == `IJ_SYSRETURN || op1 == `IJ_TRAP) num_operands = 0;
272 
 
273 
        end else if (il == 2 && mode == 5 && instruction_in[5:1] == 58 >> 1) begin
274 
            num_operands = 1;
275 
        end
276 
        // else if ?
277 
 
278 
    end
279 
 
280 
    if (format == `FORMAT_A || format == `FORMAT_E) begin
281 
        if (instruction_in[`MASK] != 7) mask_used = 1;     // a mask register is used
282 
    end
283 
 
284 
    // detect use of registers and pointer, index, scale factor, offset, limit, fallback
285 
    index_limit = 0;
286 
    offset_field = `OFFSET_NONE;
287 
    immediate_field = `IMMED_NONE;
288 
    rs_status = `REG_UNUSED;
289 
    rt_status = `REG_UNUSED;
290 
    rd_status = `REG_UNUSED;
291 
    scale_factor = `SCALE_UNDEF;
292 
    broadcast = 0;
293 
    fallback_use = mask_used ? `FALLBACK_SOURCE : `FALLBACK_NONE;
294 
 
295 
    // detect format
296 
    if (il == 0) begin // format 0.x
297 
        if ((mode == 0 && !M) || mode == 2) begin
298 
            // format 0.0A, 0.2A: RD = f3(RD, RS, RT)
299 
            if (num_operands > 0) rt_status = register_type;
300 
            if (num_operands > 1 || mask_used) rs_status = register_type;
301 
            if (num_operands > 2) rd_status = register_type;
302 
            if (mask_used && num_operands == 1) fallback_use = `FALLBACK_RS;
303 
        end else if ((mode == 1 && !M) || mode == 3) begin
304 
            // format 0.1B, 0.3B: RD = f3(RD, RS, IM1).
305 
            if (num_operands > 1) rs_status = register_type;
306 
            if (num_operands > 2) rd_status = register_type;
307 
            immediate_field = `IMMED_1;
308 
        end else if (mode == 4) begin
309 
            // format 0.4A: RD = f2(RD, [RS]).
310 
            if (num_operands > 1 || mask_used) rd_status = `REG_VECTOR;
311 
            if (num_operands > 2) format_error = 1;
312 
            rs_status = `REG_POINTER;
313 
            rt_status = `REG_LENGTH;
314 
        end else if (mode == 5) begin
315 
            // format 0.5A: f2(RD, [RS-RT]).
316 
            rs_status = `REG_POINTER;
317 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
318 
            scale_factor = `SCALE_MINUS;
319 
            if (num_operands > 1 || mask_used) rd_status = `REG_VECTOR;
320 
            if (num_operands > 2) format_error = 1;
321 
        end else if (mode == 6) begin
322 
            // format 0.6A: f2(RD, [RS+RT*OS]). scalar
323 
            rs_status = `REG_POINTER;
324 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
325 
            scale_factor = `SCALE_OS;
326 
            if (num_operands > 1 || mask_used) rd_status = `REG_VECTOR;
327 
            if (num_operands > 2) format_error = 1;
328 
        end else if (mode == 7) begin
329 
            // format 0.7B: f2(RD, [RS+IM1*OS]). scalar
330 
            rs_status = `REG_POINTER;
331 
            scale_factor = `SCALE_OS;
332 
            offset_field = `OFFSET_1;
333 
            if (num_operands > 1) rd_status = `REG_VECTOR;
334 
            if (num_operands > 2) format_error = 1;
335 
        end else if (mode == 0 && M) begin
336 
            // format 0.8A: f2(RD, [RS+RT*OS]).
337 
            rs_status = `REG_POINTER;
338 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
339 
            scale_factor = `SCALE_OS;
340 
            if (num_operands > 1 || mask_used) rd_status = `REG_OPERAND;
341 
            if (num_operands > 2) format_error = 1;
342 
        end else if (mode == 1 && M) begin
343 
            // format 0.9B: f2(RD, [RS+IM1*OS]).
344 
            rs_status = `REG_POINTER;
345 
            scale_factor = `SCALE_OS;
346 
            offset_field = `OFFSET_1;
347 
            if (num_operands > 1) rd_status = `REG_OPERAND;
348 
            if (num_operands > 2) format_error = 1;
349 
        end
350 
 
351 
    end else if (il == 1) begin
352 
        // format 1.x. no memory operands
353 
        if ((mode == 0 && !M) || mode == 2) begin
354 
            // format 1.0A, 1.2A: RD = f3(RD, RS, RT).
355 
            if (num_operands > 0) rt_status = register_type;
356 
            if (num_operands > 1 || mask_used) rs_status = register_type;
357 
            if (num_operands > 2) rd_status = register_type;
358 
            if (mask_used && num_operands == 1) fallback_use = `FALLBACK_RS;
359 
        end else if (mode == 1 || mode == 4) begin
360 
            // format 1.1C, 1.4C: RD = f2(RD, IM1-2).
361 
            if (num_operands > 1) rd_status = register_type;
362 
            if (num_operands > 2) format_error = 1;
363 
            immediate_field = `IMMED_2;
364 
        end else if (mode == 3 || (mode == 0 & M)) begin
365 
            // format 1.3B, 1.8B: RD = f3(RD, RS, IM1).
366 
            if (num_operands > 1) rs_status = register_type;
367 
            if (num_operands > 2) rd_status = register_type;
368 
            if (op1 == `II_READ_SPEC18 && mode[0] == 0) rs_status = `REG_SYSTEM;
369 
            immediate_field = `IMMED_1;
370 
        end else if (mode == 4) begin
371 
            // format 1.4C: RD = f2(RD, IM1-2)
372 
            immediate_field = `IMMED_2;
373 
            if (num_operands > 1) rd_status = register_type;
374 
        end else if (mode == 5) begin
375 
            // format 1.5:
376 
            format_error = 1;                              // format 1.5 unused
377 
        end else if (mode == 6) begin
378 
            // format 1.6: jump instructions
379 
            if (op1 <= `IJ_LAST_CONDITIONAL) begin
380 
                // ordinary conditional jumps
381 
                rs_status = register_type;
382 
                rd_status = register_type;
383 
            end else if (op1[5:1] == (`IJ_JUMP_INDIRECT_MEM >> 1)) begin
384 
                // indirect jump to memory address
385 
                rs_status = `REG_POINTER;
386 
                offset_field = `OFFSET_1;
387 
                scale_factor = `SCALE_OS;
388 
            end else if (op1[5:1] == (`IJ_JUMP_RELATIVE >> 1)) begin
389 
                // jump to table of relative pointers in memory. format 1.6A
390 
                rs_status = `REG_POINTER;
391 
                if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
392 
                rd_status = `REG_OPERAND;
393 
                scale_factor = `SCALE_OS;
394 
                offset_field = `OFFSET_NONE;
395 
                if (instruction_in[`MASK] != 7) format_error = 1; // mask not allowed
396 
            end else if (op1 == `IJ_SYSCALL) begin
397 
                rs_status = `REG_OPERAND;
398 
                rt_status = `REG_OPERAND;
399 
                rd_status = `REG_OPERAND;
400 
            end
401 
        end else if (mode == 7) begin
402 
            // format 1.7: jump instructions
403 
            if (op1 != `IJ_SYSRETURN && op1 != `IJ_TRAP) begin
404 
                rd_status = register_type;
405 
            end
406 
            if (op1 <= `IJ_LAST_CONDITIONAL) begin
407 
                immediate_field = `IMMED_1;                // IM2 = immediate operand
408 
            end
409 
        end else if (mode == 0 && M) begin
410 
            // format 1.8B: RD = f3(RD, RS, IM1).
411 
            if (num_operands > 0) rs_status = `REG_OPERAND;
412 
            if (num_operands > 1) rd_status = `REG_OPERAND;
413 
            if (num_operands > 2) format_error = 1;
414 
            immediate_field = `IMMED_1;
415 
        end
416 
 
417 
    end else if (il == 2 && mode == 0 && !M) begin
418 
        // format 2.0.x E
419 
        if (mode2 == 0) begin
420 
            // format 2.0.0: RD = f3(RU, RT, [RS+IM2]).
421 
            rs_status = `REG_POINTER;
422 
            offset_field = `OFFSET_2;
423 
            if (num_operands > 1) rt_status = `REG_OPERAND;
424 
            if (num_operands > 2 | mask_used | mask_alternative) ru_status = `REG_OPERAND;
425 
            if ((mask_used | mask_alternative) && num_operands < 3) fallback_use = `FALLBACK_RU;
426 
        end else if (mode2 == 1) begin
427 
            // format 2.0.1: RD = f3(RD, RU, [RS+RT+IM2]).
428 
            rs_status = `REG_POINTER;
429 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
430 
            offset_field = `OFFSET_2;
431 
            scale_factor = `SCALE_NONE;
432 
            if (num_operands > 1 || mask_used) ru_status = `REG_OPERAND;
433 
            if (num_operands > 2) rd_status = `REG_OPERAND;
434 
            if (mask_used && num_operands == 1) begin
435 
                fallback_use = `FALLBACK_RU;  ru_status = `REG_OPERAND;
436 
            end
437 
        end else if (mode2 == 2) begin
438 
            // format 2.0.2: RD = f3(RD, RU, [RS+RT*OS+IM2]).
439 
            rs_status = `REG_POINTER;
440 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
441 
            offset_field = `OFFSET_2;
442 
            scale_factor = `SCALE_OS;
443 
            if (num_operands > 1 || mask_used) ru_status = `REG_OPERAND;
444 
            if (num_operands > 2) rd_status = `REG_OPERAND;
445 
            if (mask_used && num_operands == 1) fallback_use = `FALLBACK_RU;
446 
        end else if (mode2 == 3) begin
447 
            // format 2.0.3: RD = f3(RD, RU, [RS+RT*OS]).. limit IM2
448 
            rs_status = `REG_POINTER;
449 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
450 
            scale_factor = `SCALE_OS;
451 
            index_limit = 1;
452 
            if (num_operands > 1 || mask_used) ru_status = `REG_OPERAND;
453 
            if (num_operands > 2) rd_status = `REG_OPERAND;
454 
            if (mask_used && num_operands == 1) fallback_use = `FALLBACK_RU;
455 
        end else if (mode2 == 5) begin
456 
            // format 2.0.5: RD = f3(RU, [RS+RT*OS+IM2], IM3).
457 
            rs_status = `REG_POINTER;
458 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
459 
            scale_factor = `SCALE_OS;
460 
            offset_field = `OFFSET_2;
461 
            immediate_field = `IMMED_1;                    // immediate field IM3 extended into OP2
462 
            if (num_operands > 2 | mask_used | mask_alternative) ru_status = `REG_OPERAND;
463 
            if ((mask_used | mask_alternative) && num_operands < 3) fallback_use = `FALLBACK_RU;
464 
        end else if (mode2 == 6) begin
465 
            offset_field = `OFFSET_NONE;
466 
            // format 2.0.6: RD = f3(RU, RS, RT).
467 
            rt_status = `REG_OPERAND;
468 
            if (num_operands > 1) rs_status = `REG_OPERAND;
469 
            if (num_operands > 2 | mask_used | mask_alternative) ru_status = `REG_OPERAND;
470 
            if ((mask_used | mask_alternative) && num_operands < 3) fallback_use = `FALLBACK_RU;
471 
        end else if (mode2 == 7) begin
472 
            immediate_field = `IMMED_2;
473 
            // format 2.0.7: RD = f3(RS, RT, IM2 << IM3).
474 
            if (num_operands > 1) rt_status = `REG_OPERAND;
475 
            if (num_operands > 2) rs_status = `REG_OPERAND;
476 
            if ((mask_used | mask_alternative) && num_operands < 3) begin
477 
                fallback_use = `FALLBACK_RS;  rs_status = `REG_OPERAND;
478 
            end
479 
        end else begin
480 
            // format 2.0.4 unused
481 
            format_error = 1;
482 
        end
483 
 
484 
    end else if (il == 2 && mode == 1 && !M) begin
485 
        // format 2.1A. RD = f3(RD, RT, [RS+IM2]).
486 
        rs_status = `REG_POINTER;
487 
        offset_field = `OFFSET_3;
488 
        scale_factor = `SCALE_NONE;
489 
        if (num_operands > 1 || mask_used) rt_status = `REG_OPERAND;
490 
        if (num_operands > 2) rd_status = `REG_OPERAND;
491 
        if (mask_used && num_operands == 1) fallback_use = `FALLBACK_RT;
492 
 
493 
    end else if (il == 2 && mode == 2) begin
494 
        // format 2.2.x E
495 
        if (mode2 == 0) begin
496 
            // format 2.2.0: RD = f3(RD, RU, [RS+IM2]). broadcast
497 
            rs_status = `REG_POINTER;
498 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_LENGTH;
499 
            offset_field = `OFFSET_2;
500 
            broadcast = 1;
501 
            if (num_operands > 1 || mask_used) ru_status = `REG_VECTOR;
502 
            if (num_operands > 2) rd_status = `REG_VECTOR;
503 
            if (mask_used && num_operands == 1) fallback_use = `FALLBACK_RU;
504 
        end else if (mode2 == 1) begin
505 
            // format 2.2.1: RD = f3(RD, RU, [RS+IM2]). length RT
506 
            rs_status = `REG_POINTER;
507 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_LENGTH;
508 
            offset_field = `OFFSET_2;
509 
            if (num_operands > 1 || mask_used) ru_status = `REG_VECTOR;
510 
            if (num_operands > 2) rd_status = `REG_VECTOR;
511 
            if (mask_used && num_operands == 1) fallback_use = `FALLBACK_RU;
512 
        end else if (mode2 == 2) begin
513 
            // format 2.2.2: RD = f3(RD, RU, [RS+RT*OS+IM2]).. scalar
514 
            rs_status = `REG_POINTER;
515 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
516 
            offset_field = `OFFSET_2;
517 
            scale_factor = `SCALE_OS;
518 
            if (num_operands > 1 || mask_used) ru_status = `REG_VECTOR;
519 
            if (num_operands > 2) rd_status = `REG_VECTOR;
520 
            if (mask_used && num_operands == 1) fallback_use = `FALLBACK_RU;
521 
        end else if (mode2 == 3) begin
522 
            // format 2.2.3: RD = f3(RD, RU, [RS+RT*OS]).. limit IM2
523 
            rs_status = `REG_POINTER;
524 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
525 
            scale_factor = `SCALE_OS;
526 
            index_limit = 1;
527 
            if (num_operands > 1 || mask_used) ru_status = `REG_VECTOR;
528 
            if (num_operands > 2) rd_status = `REG_VECTOR;
529 
            if (mask_used && num_operands == 1) fallback_use = `FALLBACK_RU;
530 
        end else if (mode2 == 4) begin
531 
            // format 2.2.4: RD = f3(RD, RU, [RS-RT+IM2]).
532 
            rs_status = `REG_POINTER;
533 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
534 
            scale_factor = `SCALE_MINUS;
535 
            offset_field = `OFFSET_2;
536 
            if (num_operands > 1 || mask_used) ru_status = `REG_VECTOR;
537 
            if (num_operands > 2) rd_status = `REG_VECTOR;
538 
            if (mask_used && num_operands == 1) fallback_use = `FALLBACK_RU;
539 
        end else if (mode2 == 5) begin
540 
            // format 2.2.5: RD = f3(RU, [RS+IM2], IM3).
541 
            rs_status = `REG_POINTER;
542 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_LENGTH;
543 
            offset_field = `OFFSET_2;
544 
            immediate_field = `IMMED_1;                    // immediate field IM3 extended into OP2
545 
            if (num_operands > 2 || mask_used) ru_status = `REG_OPERAND;
546 
            if ((mask_used | mask_alternative) && num_operands < 3) begin
547 
                fallback_use = `FALLBACK_RU;  ru_status = `REG_VECTOR;
548 
            end
549 
        end else if (mode2 == 6) begin
550 
            // format 2.2.6: RD = f3(RU, RS, RT).
551 
            offset_field = `OFFSET_NONE;                   // register operands only
552 
            rt_status = `REG_VECTOR;
553 
            if (num_operands > 1) rs_status = `REG_VECTOR;
554 
            if (num_operands > 2) ru_status = `REG_VECTOR;
555 
            if ((mask_used | mask_alternative) && num_operands < 3) begin
556 
                fallback_use = `FALLBACK_RU; ru_status = `REG_VECTOR;
557 
            end
558 
        end else if (mode2 == 7) begin
559 
            // format 2.2.7: RD = f3(RS, RT, IM2 << IM3).
560 
            immediate_field = `IMMED_2;                    // immediate operand
561 
            if (num_operands > 1) rt_status = `REG_VECTOR;
562 
            if (num_operands > 2) rs_status = `REG_VECTOR;
563 
            if ((mask_used | mask_alternative) && num_operands < 3) begin
564 
                fallback_use = `FALLBACK_RS;  rs_status = `REG_VECTOR;
565 
            end
566 
        end
567 
 
568 
    end else if (il == 2 && mode == 3) begin
569 
        // format 2.3A: RD = f3(RS, RT, IM2).
570 
        immediate_field = `IMMED_3;                        // immediate operand
571 
        if (num_operands > 1) rt_status = `REG_VECTOR;
572 
        if (num_operands > 2 || mask_used) rs_status = `REG_VECTOR;
573 
        if (mask_used && num_operands < 3)  fallback_use = `FALLBACK_RS;
574 
 
575 
    end else if (il == 2 && mode == 4) begin
576 
        // format 2.4A: RD = f2(RD, [RS+IM2]). length=RT.
577 
        rs_status = `REG_POINTER;
578 
        if (instruction_in[`RT] != 5'H1F) rt_status = `REG_LENGTH;
579 
        offset_field = `OFFSET_3;
580 
        if (num_operands > 1 || mask_used) rd_status = `REG_VECTOR;
581 
        if (num_operands > 2) format_error = 1;
582 
 
583 
    end else if (il == 2 && mode == 5) begin
584 
        // format 2.5: jump or mixed
585 
        if (op1 < 8) begin                                 // jump instructions. Detect number of operands
586 
            if (op1 == 2 && instruction_in[5:1] == `IJ_JUMP_INDIRECT_MEM >> 1) num_operands = 1;
587 
        end
588 
        if (op1 == 0) begin
589 
            // format 2.5.0A: jump with three register operands and 24 bit offset
590 
            rs_status = register_type;
591 
            rt_status = register_type;
592 
        end else if (op1 == 1) begin
593 
            // format 2.5.1B: jump with a register source operand and a 16-bit immediate operand
594 
            rs_status = register_type;
595 
            immediate_field = `IMMED_2;                    // 16 bit in lower half of IM2
596 
        end else if (op1 == 2) begin
597 
            // format 2.5.2B: jump with register (RD), memory operand w 16 bit address, 16 bit jump offset
598 
            rd_status = register_type;
599 
            rs_status = `REG_POINTER;
600 
            offset_field = `OFFSET_2;
601 
            if (instruction_in[5:1] == `IJ_JUMP_INDIRECT_MEM >> 1) offset_field = `OFFSET_3; // format 2.5.2x: 32 bit memory offset
602 
        end else if (op1 == 3) begin
603 
            // format 2.5.3: unused
604 
            format_error = 1;
605 
        end else if (op1 == 4) begin
606 
            // format 2.5.4: jump with register (RD), one 8-bit immediate constant and 32 bit offset
607 
            rd_status = register_type;
608 
            immediate_field = `IMMED_1;                    // note: immediate operand in bit 8-15
609 
        end else if (op1 == 5) begin
610 
            // format 2.5.5: jump with one register operand (RD), an 8-bit offset and a 32-bit immediate constant
611 
            rd_status = register_type;
612 
            immediate_field = `IMMED_3;
613 
        end else if (op1 == 6) begin
614 
            // format 2.5.6: unused
615 
            format_error = 1;
616 
        end else if (op1 == 7) begin
617 
            // format 2.5.7: system call, no OPJ, 16 bit constant and 32-bit constant
618 
            rd_status = `REG_OPERAND;
619 
            immediate_field = `IMMED_3;
620 
        end else if (op1 == `II_STOREI) begin              // store constant to memory
621 
            rs_status = `REG_POINTER;
622 
            offset_field = `OFFSET_1;
623 
            immediate_field = `IMMED_3;
624 
        end else if (op1 == `II_CMPSWAP) begin             // compare_swap instruction not implemented
625 
            rs_status = `REG_POINTER;
626 
            rt_status = `REG_OPERAND;
627 
            rd_status = `REG_OPERAND;
628 
            offset_field = `OFFSET_3;
629 
        end else begin                                     // other. mixed format. fallback use unknown
630 
            rs_status = `REG_POINTER;
631 
            offset_field = `OFFSET_3;
632 
            rt_status = register_type;
633 
            rd_status = register_type;
634 
        end
635 
 
636 
    end else if (il == 2 && mode == 6) begin
637 
        // format 2.6A: RD = f3(RS, RT, IM2).
638 
        immediate_field = `IMMED_3;
639 
        if (num_operands > 1) rt_status = `REG_VECTOR;
640 
        if (num_operands > 2 || mask_used) rs_status = `REG_VECTOR;
641 
        if (mask_used && num_operands < 3)  fallback_use = `FALLBACK_RS;
642 
 
643 
    end else if (il == 2 && mode == 7) begin
644 
        // format 2.7: unused
645 
        format_error = 1;
646 
 
647 
    end else if (il == 2 && mode == 0 && M) begin
648 
        // format 2.8A: RD = f3(RS, RT, IM2).
649 
        immediate_field = `IMMED_3;
650 
        if (num_operands > 1) rt_status = `REG_OPERAND;
651 
        if (num_operands > 2 || mask_used) rs_status = `REG_OPERAND;
652 
        if (mask_used && num_operands < 3) begin
653 
            fallback_use = `FALLBACK_RS;
654 
        end
655 
 
656 
    end else if (il == 2 && mode == 1 && M) begin
657 
        // format 2.9A: RD = f3(RS, RT, IM2).
658 
        if (op1 == `II_ADDRESS_29) begin
659 
            offset_field = `OFFSET_3;                      // address instruction
660 
            rs_status = `REG_POINTER;
661 
            if (mask_used) fallback_use = `FALLBACK_RT;    // can address instruction have mask?
662 
            if (mask_used) rt_status = `REG_OPERAND;
663 
 
664 
        end else begin
665 
            immediate_field = `IMMED_3;
666 
            if (num_operands > 1) rt_status = `REG_OPERAND;
667 
            if (num_operands > 2 || mask_used) rs_status = `REG_OPERAND;
668 
            if (mask_used && num_operands < 3) fallback_use = `FALLBACK_RS;
669 
        end
670 
 
671 
    end else if (il == 3 && mode == 0 && !M) begin
672 
        // format 3.0.x E
673 
        if (mode2 == 0) begin
674 
            // format 3.0.0: RD = f3(RU, RS, [RS+IM4]).
675 
            rs_status = `REG_POINTER;
676 
            offset_field = `OFFSET_3;
677 
            if (num_operands > 1) rt_status = `REG_OPERAND;
678 
            if (num_operands > 2) ru_status = `REG_OPERAND;
679 
            if ((mask_used | mask_alternative) && num_operands < 3) begin
680 
                fallback_use = `FALLBACK_RU;  ru_status = `REG_OPERAND;
681 
            end
682 
        end else if (mode2 == 2) begin
683 
            // format 3.0.2: RD = f3(RD, RU, [RS+RT*OS+IM4]).
684 
            rs_status = `REG_POINTER;
685 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
686 
            offset_field = `OFFSET_3;
687 
            scale_factor = `SCALE_OS;
688 
            if (num_operands > 1 || mask_used) ru_status = `REG_OPERAND;
689 
            if (num_operands > 2) rd_status = `REG_OPERAND;
690 
            if (mask_used && num_operands == 1) begin
691 
                fallback_use = `FALLBACK_RU;
692 
            end
693 
        end else if (mode2 == 3) begin
694 
            // format 3.0.3: RD = f3(RD, RU, [RS+RT*OS]).. limit IM4
695 
            rs_status = `REG_POINTER;
696 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
697 
            scale_factor = `SCALE_OS;
698 
            index_limit = 1;
699 
            if (num_operands > 1 || mask_used) ru_status = `REG_OPERAND;
700 
            if (num_operands > 2) rd_status = `REG_OPERAND;
701 
            if (mask_used && num_operands == 1) begin
702 
                fallback_use = `FALLBACK_RU;
703 
            end
704 
        end else if (mode2 == 5) begin
705 
            // format 3.0.5: RD = f3(RU, [RS+RT*OS+IM2], IM4).
706 
            rs_status = `REG_POINTER;
707 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
708 
            scale_factor = `SCALE_OS;
709 
            offset_field = `OFFSET_2;
710 
            immediate_field = `IMMED_3;
711 
            if (num_operands > 2) ru_status = `REG_OPERAND;
712 
            if ((mask_used | mask_alternative) && num_operands < 3) begin
713 
                fallback_use = `FALLBACK_RU; ru_status = `REG_OPERAND;
714 
            end
715 
        end else if (mode2 == 7) begin
716 
            // format 3.0.7: RD = f3(RS, RT, IM4 << IM2).
717 
            immediate_field = `IMMED_3;
718 
            if (num_operands > 1) rt_status = `REG_OPERAND;
719 
            if (num_operands > 2 || mask_used) rs_status = `REG_OPERAND;
720 
            if ((mask_used | mask_alternative) && num_operands < 3) begin
721 
                fallback_use = `FALLBACK_RS; rs_status = `REG_OPERAND;
722 
            end
723 
        end else begin
724 
            format_error = 1;                              // other formats unused
725 
        end
726 
 
727 
    end else if (il == 3 && mode == 1) begin
728 
        // format 3.1: jump or mixed
729 
        if (op1 < 8) begin
730 
            // jump instructions. Detect number of operands
731 
            if (op1 == 1 && instruction_in[5:1] == `IJ_JUMP_DIRECT >> 1) num_operands = 0; // direct jump
732 
        end
733 
 
734 
        if (op1 == 0) begin
735 
            // format 3.1.0A jump with two registers, memory operand with 32 bit address, 24 bit jump offset
736 
            rs_status = `REG_POINTER;
737 
            rt_status = register_type;
738 
            offset_field = `OFFSET_3;
739 
        end else if (op1 == 1) begin
740 
            // format 3.1.1B: jump with 2 registers, 32-bit immediate operand and a 32-bit jump offset
741 
            rs_status = register_type;
742 
            immediate_field = `IMMED_3;
743 
 
744 
        end else begin
745 
            // single format instructions in format 3.1
746 
            immediate_field = `IMMED_3;
747 
            if (num_operands > 0) rt_status = register_type;
748 
            if (num_operands > 1 || mask_used) rs_status = register_type;
749 
            if (num_operands > 2) rd_status = register_type;
750 
            // mixed formats. fallback use unknown
751 
        end
752 
 
753 
    end else if (il == 3 && mode == 2) begin
754 
        // format 3.2.x E
755 
        if (mode2 == 0) begin
756 
            // format 3.2.0: RD = f3(RD, RU, [RS+IM4]).. broadcast
757 
            rs_status = `REG_POINTER;
758 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_LENGTH;
759 
            offset_field = `OFFSET_3;
760 
            broadcast = 1;
761 
            if (num_operands > 1 || mask_used) ru_status = `REG_VECTOR;
762 
            if (num_operands > 2) rd_status = `REG_VECTOR;
763 
            if (mask_used && num_operands == 1) begin
764 
                fallback_use = `FALLBACK_RU;
765 
            end
766 
        end else if (mode2 == 1) begin
767 
            // format 3.2.1: RD = f3(RD, RU, [RS+IM4]). Length RT
768 
            rs_status = `REG_POINTER;
769 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_LENGTH;
770 
            offset_field = `OFFSET_3;
771 
            if (num_operands > 1 || mask_used) ru_status = `REG_VECTOR;
772 
            if (num_operands > 2) rd_status = `REG_VECTOR;
773 
            if (mask_used && num_operands == 1) begin
774 
                fallback_use = `FALLBACK_RU;
775 
            end
776 
        end else if (mode2 == 2) begin
777 
            // format 3.2.2: RD = f3(RD, RU, [RS+RT*OS+IM4]).. scalar
778 
            rs_status = `REG_POINTER;
779 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
780 
            offset_field = `OFFSET_3;
781 
            scale_factor = `SCALE_OS;
782 
            if (num_operands > 1 || mask_used) ru_status = `REG_VECTOR;
783 
            if (num_operands > 2) rd_status = `REG_VECTOR;
784 
            if (mask_used && num_operands == 1) begin
785 
                fallback_use = `FALLBACK_RU;
786 
            end
787 
        end else if (mode2 == 3) begin
788 
            // format 3.2.3: RD = f3(RD, RU, [RS+RT*OS]).. limit IM4
789 
            rs_status = `REG_POINTER;
790 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_INDEX;
791 
            scale_factor = `SCALE_OS;
792 
            index_limit = 1;
793 
            if (num_operands > 1 || mask_used) ru_status = `REG_VECTOR;
794 
            if (num_operands > 2) rd_status = `REG_VECTOR;
795 
            if (mask_used && num_operands == 1) begin
796 
                fallback_use = `FALLBACK_RU;
797 
            end
798 
        end else if (mode2 == 5) begin
799 
            // format 3.2.5: RD = f3(RU, [RS+IM2], IM4). Length=RT.
800 
            rs_status = `REG_POINTER;
801 
            if (instruction_in[`RT] != 5'H1F) rt_status = `REG_LENGTH;
802 
            offset_field = `OFFSET_2;
803 
            immediate_field = `IMMED_3;
804 
            if (num_operands > 2 || mask_used) ru_status = `REG_VECTOR;
805 
            if ((mask_used | mask_alternative) && num_operands < 3) begin
806 
                fallback_use = `FALLBACK_RU;  ru_status = `REG_VECTOR;
807 
            end
808 
        end else if (mode2 == 7) begin
809 
            // format 3.2.7: RD = f3(RS, RT, IM4).
810 
            immediate_field = `IMMED_3;
811 
            if (num_operands > 1) rt_status = `REG_VECTOR;
812 
            if (num_operands > 2 || mask_used) rs_status = `REG_VECTOR;
813 
            if ((mask_used | mask_alternative) && num_operands < 3) begin
814 
                fallback_use = `FALLBACK_RS;  rs_status = `REG_VECTOR;
815 
            end
816 
        end else begin
817 
            // other formats unused
818 
            format_error = 1;
819 
        end
820 
 
821 
    end else if (il == 3 && mode == 3) begin
822 
        // format 3.3A: RD = f3(RS, RT, IM2-3).
823 
        immediate_field = `IMMED_3;
824 
        if (num_operands > 1) rt_status = `REG_VECTOR;
825 
        if (num_operands > 2 || mask_used) rs_status = `REG_VECTOR;
826 
        if (mask_used && num_operands < 3) fallback_use = `FALLBACK_RS;
827 
    end else if (il == 3 && mode == 0 && M) begin
828 
        // format 3.8A: RD = f3(RS, RT, IM2-3).
829 
        immediate_field = `IMMED_3;
830 
        if (num_operands > 1) rt_status = `REG_OPERAND;
831 
        if (num_operands > 2 || mask_used) rs_status = `REG_OPERAND;
832 
        if (mask_used && num_operands < 3) fallback_use = `FALLBACK_RS;
833 
    end
834 
 
835 
 
836 
    // detect type of result
837 
    result_type = `RESULT_REG;                             // default result type
838 
    if (category == `CAT_MULTI && op1 == `II_STORE) begin
839 
        result_type = `RESULT_MEM;                         // store instruction
840 
        rd_status = `REG_OPERAND;                          // source is rd
841 
    end else if (il == 2 && mode == 5 &&
842 
        (op1 == `II_STOREI || op1 == `II_FENCE || op1 == `II_CMPSWAP || op1 == `II_XTR_STORE)) begin
843 
        result_type = `RESULT_MEM;                         // various complex memory instructions
844 
    end else if (il == 1 && mode == 0 && M &&              // format 1.8
845 
        (op1 == `II_WR_SPEC || op1 == `II_WR_CAPA)) begin
846 
        result_type = `RESULT_SYS;                         // write system registers
847 
    end else if (il == 1 && mode == 0 && M && op1 == `II_OUTPUT_18) begin
848 
        result_type = `RESULT_NONE;                        // output, format 1.8
849 
    end else if (category == `CAT_MULTI && op1 == `II_NOP) begin
850 
        result_type = `RESULT_NONE;                        // nop
851 
    end else if (il == 1 && mode == 2 && op1 == `II_OUTPUT_18) begin
852 
        result_type = `RESULT_NONE;                        // output, format 1.2
853 
    end else if (il == 1 && mode == 3 && op1 == `II_CLEAR) begin
854 
        result_type = `RESULT_NONE;                        // the clear instruction goes directly to the vector register file, not through the ALU
855 
    end else if (category == `CAT_JUMP && il == 1) begin
856 
        if ((op1 <= `II_UNCOND_JUMP && mode == 7) || (op1 >= `II_COMPARE_FIRST && op1 <= `II_COMPARE_LAST) || op1 >= `II_INDIRECT_JUMP) result_type = `RESULT_NONE;
857 
    end else if (category == `CAT_JUMP && il > 1 && op1 == 0) begin // jump formats 2.5.0A and 3.1.0A have opj in byte 7
858 
        if ((instruction_in[61:56] >= `II_COMPARE_FIRST && instruction_in[61:56] <= `II_COMPARE_LAST) || instruction_in[61:56] >= `II_INDIRECT_JUMP) result_type = `RESULT_NONE;
859 
    end else if (category == `CAT_JUMP && il > 1) begin    // other jump formats have opj in byte 0
860 
        if ((instruction_in[5:0] >= `II_COMPARE_FIRST && instruction_in[5:0] <= `II_COMPARE_LAST) || instruction_in[5:0] >= `II_INDIRECT_JUMP) result_type = `RESULT_NONE;
861 
    end
862 
end
863 
 
864 
 
865 
// update tags
866 
always_comb begin
867 
    next_tag = 0;
868 
    tag_write = 0;
869 
    if (tag_used[current_tag]) begin                       // tag in use should have been predicted
870 
        tag_error = 1;
871 
    end else begin
872 
        tag_error = 0;
873 
    end
874 
 
875 
    // instructions without a result register need a tag in addressgenerator to distinguish instructions
876 
    if (valid & !stall_in) begin
877 
        // needs a new tag
878 
        tag_write = 1;
879 
        if (¤t_tag) next_tag = 1;                    // skip value 0
880 
        else next_tag = current_tag + 1;
881 
    end else begin
882 
        next_tag = current_tag;
883 
    end
884 
end
885 
 
886 
 
887 
// send tag to register file
888 
always_ff @(posedge clock) if (clock_enable) begin
889 
    if (tag_write && !stall_in) begin
890 
        tag_write_out <= result_type == `RESULT_REG || result_type == `RESULT_SYS;
891 
        tag_a_out <= {result_type[0], instruction_in[`RD]};
892 
        tag_val_out <= current_tag;
893 
        current_tag <= next_tag;
894 
        if (tag_used[next_tag]) begin
895 
            stall_out <= 1;                                // other reasons for stall out?
896 
        end else begin
897 
            stall_out <= 0;
898 
        end
899 
    end else begin
900 
        tag_write_out <= 0;
901 
        stall_out <= 0;
902 
    end
903 
 
904 
    if (reset) current_tag <= 1;
905 
end
906 
 
907 
 
908 
// other outputs
909 
always_ff @(posedge clock) if (clock_enable) begin
910 
    if (reset) valid_out <= 0;
911 
    else if (!stall_in) valid_out <= valid_in;
912 
 
913 
    if (!stall_in) begin
914 
        instruction_pointer_out <= instruction_pointer_in;
915 
        instruction_out <= instruction_in;
916 
        vector_out <= register_type == `REG_VECTOR;
917 
        category_out <= category;
918 
        format_out <= format;
919 
        rs_status_out <= rs_status;
920 
        rt_status_out <= rt_status;
921 
        ru_status_out <= ru_status;
922 
        rd_status_out <= rd_status;
923 
        mask_status_out <= (mask_used || mask_options) ? register_type : `REG_UNUSED;
924 
        mask_options_out <= mask_options;
925 
        mask_alternative_out <= mask_alternative;
926 
        fallback_use_out <= fallback_use;
927 
        num_operands_out <= num_operands;
928 
        result_type_out <= result_type;
929 
        offset_field_out <= offset_field;
930 
        immediate_field_out <= immediate_field;
931 
        scale_factor_out <= scale_factor;
932 
        index_limit_out <= index_limit;
933 
 
934 
        // debug output
935 
        debug1_out[1:0]   <= il;
936 
        debug1_out[6:4]   <= mode;
937 
        debug1_out[8]     <= M;
938 
        debug1_out[14:12] <= mode2;
939 
        debug1_out[17:16] <= offset_field;
940 
        debug1_out[21:20] <= immediate_field;
941 
 
942 
    end
943 
end
944 
 
945 
 
946 
// update list of tags in use
947 
genvar i;   // generation loop for all bits in tag_used
948 
for (i=0; i < (2**`TAG_WIDTH); i++) begin
949 
    always_ff @(posedge clock) if (clock_enable && !stall_in) begin
950 
        if (reset) begin
951 
            tag_used[i] <= 0;
952 
        end else if (i == current_tag) begin
953 
            tag_used[i] <= 1;
954 
        end else if ((write_en1 && i == write_tag1) || (write_en2 && i == write_tag2)) begin
955 
            tag_used[i] <= 0;
956 
        end
957 
    end
958 
end
959 
 
960 
endmodule

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.