URL https://opencores.org/ocsvn/forwardcom/forwardcom/trunk

Subversion Repositories forwardcom

[/] [forwardcom/] [trunk/] [defines - Copy.vh] - Blame information for rev 138

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////////////////
// Engineer:       Agner Fog
// 
// Create Date:    2020-06-06
// Last modified:  2021-08-04
// Module Name:    defines.vh
// Project Name:   ForwardCom soft core
// Target Devices: Artix 7
// Tool Versions:  Vivado v. 2020.1
// License:        CERN-OHL-W v. 2 or later
// Description:    Various global constants
//////////////////////////////////////////////////////////////////////////////////
 
// Important: Remember to set the clock frequency to the value in the config_.. file
 
// Choose configuration:
//`include "config_r32.vh"             // 32 bit registers, 32kB data RAM, 64 kB code RAM
`include "config_r64.vh"               // 64 bit registers, 32kB data RAM, 64 kB code RAM
 
 
`timescale 1ns / 1ps                   // set time scale for simulation
 
////////////////////////////////////////////////////////////////////////////////////
//
//          Constants used during building
//
////////////////////////////////////////////////////////////////////////////////////
 
 
// Fields in the instruction templates
`define IL     31:30                   // instruction length field
`define MODE   29:27                   // mode field
`define ILMODE 31:27                   // combined IL and mode field
`define OP1    26:21                   // op1 field
`define RD     20:16                   // RD: destination operand field
`define M      15                      // M bit extends mode field
`define OT     15:13                   // operand type field, including M bit
`define RS     12:8                    // RS: first source operand field
`define MASK   7:5                     // mask field
`define RT     4:0                     // RT: second source operand field
`define MODE   29:27                   // mode field
`define IM1    7:0                     // immediate field in format B, 8 bits
`define IM1S   7                       // sign bit of IM1
`define IM2E   47:32                   // immediate field 2 in format E, 16 bits
`define IM2ES  47                      // sign bit of IM2E
`define IM3E   53:48                   // immediate field 3 in format E, 6 bits
`define IM3EX  55:48                   // immediate field 3 in format E, extended into OP2
`define IM3EXS 55                      // sign bit of IM3EX
`define OP2    55:54                   // op2 field in format E
`define RU     60:56                   // RU: third source operand field in format E
`define MODE2  63:61                   // mode2 field in format E
 
// Values for operand type
`define OT_INT8     0                  //  8 bit integer
`define OT_INT16    1                  // 16 bit integer
`define OT_INT32    2                  // 32 bit integer
`define OT_INT64    3                  // 64 bit integer
`define OT_INT128   4                  // 128 bit integer
`define OT_FLOAT32  5                  // single precision float
`define OT_FLOAT64  6                  // double precision float
`define OT_FLOAT128 7                  // quadruple precision float
`define OT_FLOAT16  1                  // half precision float
 
// Values for instruction category
`define CAT_MULTI  2'b00               // multi-format instruction
`define CAT_SINGLE 2'b01               // single-format instruction
`define CAT_JUMP   2'b10               // control transfer instruction, i.e. jump, call, return
 
// Values for instruction format
`define FORMAT_A  2'b00                // format A 
`define FORMAT_E  2'b01                // format E
`define FORMAT_B  2'b10                // format B
`define FORMAT_C  2'b11                // format C
 
// Values for use of registers
`define REG_UNUSED  0                  // register is unused
`define REG_OPERAND 1                  // register is a general purpose register input operand
`define REG_VECTOR  2                  // register is a vector register input operand
`define REG_SYSTEM  3                  // register is a system register
`define REG_POINTER 4                  // register is a memory base pointer (RS only)
`define REG_INDEX   4                  // register is a scaled array index (RT only)
`define REG_LENGTH  5                  // register specifies vector length (RT only)
 
// Values for scale factor applied to index register
`define SCALE_NONE  0                  // index is not scaled
`define SCALE_OS    1                  // index is scaled by operand size
`define SCALE_MINUS 2                  // index is scaled by -1
`define SCALE_UNDEF 2'bXX              // no index register
 
// Values for address offset field
`define OFFSET_NONE  0                 // no offset to pointer register
`define OFFSET_1     1                 // 8 bit offset in IM1, scaled by operand size
`define OFFSET_2     2                 // 16 bit offset in IM2, not scaled
`define OFFSET_3     3                 // 24, 32, or 64 bit offset in IM2 or IM4, not scaled
 
// Values for immediate operand field
`define IMMED_NONE  0                  // no immediate operand
`define IMMED_1     1                  // 8 bit immediate operand in IM1
`define IMMED_2     2                  // 16 bit immediate operand in {IM2,IM1} for format C, or IM2 for format E
`define IMMED_3     3                  // 32 or 64 bit immediate operand
 
// Values for result type
`define RESULT_REG   0                 // result is a register, general purpose or vector
`define RESULT_SYS   1                 // result is a system register.
`define RESULT_MEM   2                 // result is a memory output
`define RESULT_NONE  3                 // result is nothing or none of the above
 
// Fallback option
`define FALLBACK_NONE   0              // no fallback
`define FALLBACK_SOURCE 1              // first source register is used for fallback
`define FALLBACK_RU     2              // separate fallback register in RU field
`define FALLBACK_RS     3              // separate fallback register in RS field
`define FALLBACK_RT     4              // separate fallback register in RT field
 
// Special register numbers in register file
`define NUMCONTR       32              // numeric control register
`define THREADP        33              // thread pointer
`define DATAP          34              // data section pointer
 
// Instruction OP1 values. These are not necessarily identical to the values in the assembler and emulator
`define II_NOP              0          // nop instruction
`define II_MOVE             2          // move instruction
`define II_STORE            1          // write to memory
`define II_SIGN_EXTEND      4          // sign_extend
`define II_SIGN_EXTEND_ADD  5          // sign_extend_add
`define II_COMPARE          7          // compare
`define II_ADD              8          // add
`define II_SUB              9          // sub
`define II_SUB_REV         10          // sub_rev
`define II_MUL             11          // mul
`define II_MUL_HI          12          // mul_hi
`define II_MUL_HI_U        13          // mul_hi_u
`define II_DIV             14          // div
`define II_DIV_U           15          // div_u
`define II_DIV_REV         16          // div_rev 
`define II_REM             18          // rem
`define II_REM_U           19          // rem_u
`define II_MIN             20          // min
`define II_MIN_U           21          // min_u
`define II_MAX             22          // max
`define II_MAX_U           23          // max_u
`define II_AND             26          // and
`define II_OR              27          // or
`define II_XOR             28          // xor
`define II_MUL_2POW        32          // mul_2pow
`define II_SHIFT_LEFT      32          // shift_left
`define II_ROTATE          33          // rotate
`define II_SHIFT_RIGHT_S   34          // shift_right_s
`define II_SHIFT_RIGHT_U   35          // shift_right_u
`define II_CLEAR_BIT       36          // clear_bit
`define II_SET_BIT         37          // set_bit
`define II_TOGGLE_BIT      38          // toggle_bit
`define II_TEST_BIT        39          // test_bit
`define II_TEST_BITS_AND   40          // test_bits_and
`define II_TEST_BITS_OR    41          // test_bits_or
`define II_ADD_FLOAT16     44          // add float16
`define II_SUB_FLOAT16     45          // sub float16
`define II_MUL_FLOAT16     46          // mul float16
`define II_MUL_ADD_FLOAT16 48          // mul_add float16
`define II_MUL_ADD         49          // mul_add
`define II_MUL_ADD2        50          // mul_add2
`define II_ADD_ADD         51          // add_add
`define II_SELECT_BITS     52          // select_bits
`define II_FUNNEL_SHIFT    53          // funnel_shift
 
`define II_STOREI           8          // write immediate to memory, format 2.5
`define II_FENCE           16          // fence instruction, format 2.5
`define II_CMPSWAP         18          // compare_swap instruction format, 2.5 
`define II_XTR_STORE       32          // extract_store instruction
`define II_CLEAR           58          // clear instruction
`define II_WR_SPEC         33          // write_spec instruction
`define II_WR_CAPA         35          // write_capabilities instruction
`define II_ONE_OP           4          // multiformat instructions with one input have op1 <= II_ONE_OP 
`define II_VECTORS_USED    59          // vectors_used instruction
`define II_UNCOND_JUMP     15          // unconditional jump or call <= this value
`define II_INDIRECT_JUMP   58          // indirect jump instructions in format 1.6B or 2.5.0
`define II_JUMP_RELATIVE   60          // multiway jump instructions in format 1.6A
`define II_RETURN          62          // return instruction
`define II_25_VECT         32          // first vector instruction in format 2.5A
`define II_31_VECT         32          // first vector instruction in format 3.1A
 
`define II_3OP_FIRST       48          // first multiformat instruction with three input operands 
`define II_3OP_LAST        55          // last multiformat instruction with three input operands
`define II_COMPARE_FIRST   26          // first conditional jump instruction with no result register   
`define II_COMPARE_LAST    47          // last conditional jump instruction with no result register   
 
// Instructions with IM3 used for option bits in format E. Used in addressgenerator.sv
// II_COMPARE, II_SIGN_EXTEND_ADD, II_TEST_BIT, II_TEST_BITS_AND, II_TEST_BITS_OR,
// II_DIV, II_DIV_REV, `II_DIV_U
// II_MUL_ADD_FLOAT16, II_MUL_ADD, II_MUL_ADD2, II_ADD_ADD, 
 
// Instructions with first and last operands swapped
// II_SUB_REV, II_DIV_REV, II_MUL_ADD2 
 
 
// Instructions with half precision operands
`define II_ADD_H14         40          // half precision add format 1.4
`define II_MUL_H14         41          // half precision mul format 1.4
 
// Other single format instructions
// Format 1.1C
`define II_MOVEU11          3          // move 16 bits zero extended format 1.1C
`define II_SHIFT_MOVE_11    4          // shift left by IM1, move
`define II_MOVE11_LAST      5          // last instruction with 1 operand in format 1.1C
`define II_ADD11            6          // add 16 bits sign extended
`define II_MUL11            8          // multiply 16 bits sign extended
`define II_SHIFT_ADD_11    10          // shift left by IM1, add
`define II_SHIFT_AND_11    12          // shift left by IM1, and
`define II_SHIFT_OR_11     14          // shift left by IM1, or
`define II_SHIFT_XOR_11    16          // shift left by IM1, xor
`define II_ADDSHIFT16_11   18          // shift left by 16, add
 
// Format 1.2B
`define II_GETLEN_12        0          // getlen instruction format 1.2
`define II_GETNUM_12        1          // getnum instruction format 1.2
 
// Format 1.8B
`define II_SHIFT_ABS18      0          // abs
`define II_BITSCAN_18       2          // bitscan
`define II_ROUNDP2_18       3          // roundp2
`define II_POPCOUNT_18      4          // popcount
`define II_READ_SPEC18     32          // read_spec 
`define II_WRITE_SPEC18    33          // read_spec
`define II_READ_CAP18      34          // read_capabilities
`define II_WRITE_CAP18     35          // write_capabilities
`define II_READ_PERF18     36          // read_perf. must be even
`define II_READ_PERFS18    37          // read_perfs = II_READ_PERF18 + 1
`define II_READ_SYS18      38          // read_sys
`define II_WRITE_SYS18     39          // write_sys
`define II_INPUT_18        62          // input instruction format 1.2 and 1.8
`define II_OUTPUT_18       63          // output instruction format 1.2 and 1.8
 
// Format 2.x
`define II_MOVE_BITS        0          // move bits instruction op1, single format 2.X.7-0.1
`define II2_MOVE_BITS       1          // move bits instruction op2, single format 2.X.7-0.1
`define II_MASK_LENGTH      1          // mask length instruction op1, single format 2.2.7-1.1
`define II2_MASK_LENGTH     1          // mask length instruction op2, single format 2.2.7-1.1
`define II_TRUTH_TAB3       8          // truth_tab3 instruction op1, single format 2.0.6 or 2.2.6 - 8.1
`define II2_TRUTH_TAB3      1          // truth_tab3 op2
 
// Format 2.6A
`define II_LOAD_HI_26       0          // load_hi instruction format 2.6
 
// Format 2.9A
`define II_MOVE_HI_29       0          // move high 32 bit instruction format 2.9
`define II_INSERT_HI_29     1          // insert_hi
`define II_ADDU_29          2          // add 
`define II_SUBU_29          3          // sub 
`define II_ADD_HI_29        4          // add 
`define II_AND_HI_29        5          // and high 
`define II_OR_HI_29         6          // or high 
`define II_XOR_HI_29        7          // xor high
`define II_ADDRESS_29      32          // address
 
// jump instructions
`define IJ_SUB_JZ               0      // subtract, jump if zero
`define IJ_SUB_JNEG             2      // subtract, jump if negative
`define IJ_SUB_JPOS             4      // subtract, jump if positive
`define IJ_SUB_JOVFLW           6      // subtract, jump if overflow
`define IJ_SUB_JBORROW          8      // subtract, jump if borrow
`define IJ_AND_JZ              10      // and, jump if zero
`define IJ_OR_JZ               12      // or,  jump if zero
`define IJ_XOR_JZ              14      // xor, jump if zero
`define IJ_ADD_JZ              16      // add, jump if zero
`define IJ_ADD_JNEG            18      // add, jump if negative
`define IJ_ADD_JPOS            20      // add, jump if positive
`define IJ_ADD_JOVFLW          22      // add, jump if overflow
`define IJ_ADD_JCARRY          24      // add, jump if carry
`define IJ_TEST_BIT_JTRUE      26      // test single bit, jump if 1
`define IJ_TEST_BITS_AND       28      // test bits, jump if all 1
`define IJ_TEST_BITS_OR        30      // test bits, jump if all 1
`define IJ_COMPARE_JEQ         32      // compare, jump if equal
`define IJ_COMPARE_JSB         34      // compare, jump if signed below
`define IJ_COMPARE_JSA         36      // compare, jump if signed above
`define IJ_COMPARE_JUB         38      // compare, jump if unsigned below
`define IJ_COMPARE_JUA         40      // compare, jump if unsigned above
`define IJ_INC_COMP_JBELOW     48      // increment. jump if below n
`define IJ_INC_COMP_JABOVE     50      // increment. jump if above n
`define IJ_SUB_MAXLEN_JPOS     52      // subtract max vector length, jump while positive
`define IJ_LAST_CONDITIONAL    55      // last two-way conditional jump
`define IJ_JUMP_INDIRECT_REG   58      // indirect jump to register, format 1.7
`define IJ_JUMP_INDIRECT_MEM   58      // indirect jump to memory address, format 1.6 and 2.5.0
`define IJ_JUMP_DIRECT         58      // direct unconditional jump, format 2.5.4 and 3.1.1
`define IJ_JUMP_RELATIVE       60      // jump with relative pointers in memory, format 1.6 and 2.5.0
`define IJ_RETURN              62      // return, format 1.6
`define IJ_SYSRETURN           62      // system return, format 1.7
`define IJ_SYSCALL             63      // system call
`define IJ_TRAP                63      // trap (software interrupt, debug breakpoint), format 1.7
`define IJ_CONDITIONAL_TRAP    63      // conditional trap. Format 2.5.3. Not supported. 
 
// Instruction ID's opx in execution unit for single-format instructions
// These values are arbitrary and may be changed. Must be bigger than 63
`define IX_UNDEF              127      // unknown instruction
`define IX_ABS                 64      // abs format 1.8
`define IX_BIT_SCAN            66      // bitscan format 1.8
`define IX_ROUNDP2             67      // roundp2 format 1.8
`define IX_POPCOUNT            68      // popcount format 1.8
`define IX_READ_SPEC           69      // bitscan format 1.8
`define IX_WRITE_SPEC          70      // write_spec format 1.8
`define IX_READ_CAPABILITIES   71      // read_capab format 1.8
`define IX_WRITE_CAPABILITIES  72      // write_capab format 1.8
`define IX_READ_PERF           74      // read_perf format 1.8
`define IX_READ_PERFS          75      // read_perfs format 1.8
`define IX_READ_SYS            76      // read_sys format 1.8
`define IX_WRITE_SYS           77      // write_sys format 1.8
`define IX_INPUT               78      // input format 1.8
`define IX_OUTPUT              79      // output format 1.8
`define IX_MOVE_BITS1          80      // move bits instruction, shifting left
`define IX_MOVE_BITS2          81      // move bits instruction, shifting right
`define IX_SHIFT32             82      // move format 2.9: shift left 32 bits 
`define IX_INSERT_HI           83      // insert_high format 2.9. replace high 32 bits 
`define IX_ADDRESS             84      // address instruction format 2.9. (replaced by move)
`define IX_TRUTH_TAB3          85      // truth_tab3 instruction
`define IX_UNCOND_JUMP         90      // unconditional direct self-relative jump
`define IX_INDIRECT_JUMP       91      // indirect jump to register or memory
`define IX_RELATIVE_JUMP       92      // indirect jump with table of relative addresses
 
 

Browse

Tools

Subversion Repositories forwardcom

[/] [forwardcom/] [trunk/] [defines - Copy.vh] - Blame information for rev 138

Line No.	Rev	Author	Line
1	24	Agner	`//////////////////////////////////////////////////////////////////////////////////`
2			`// Engineer: Agner Fog`
3			`//`
4			`// Create Date: 2020-06-06`
5			`// Last modified: 2021-08-04`
6			`// Module Name: defines.vh`
7			`// Project Name: ForwardCom soft core`
8			`// Target Devices: Artix 7`
9			`// Tool Versions: Vivado v. 2020.1`
10			`// License: CERN-OHL-W v. 2 or later`
11			`// Description: Various global constants`
12			`//////////////////////////////////////////////////////////////////////////////////`
13
14			`// Important: Remember to set the clock frequency to the value in the config_.. file`
15
16			`// Choose configuration:`
17			//`include "config_r32.vh" // 32 bit registers, 32kB data RAM, 64 kB code RAM
18			`include "config_r64.vh" // 64 bit registers, 32kB data RAM, 64 kB code RAM
19
20
21			`timescale 1ns / 1ps // set time scale for simulation
22
23			`////////////////////////////////////////////////////////////////////////////////////`
24			`//`
25			`// Constants used during building`
26			`//`
27			`////////////////////////////////////////////////////////////////////////////////////`
28
29
30			`// Fields in the instruction templates`
31			`define IL 31:30 // instruction length field
32			`define MODE 29:27 // mode field
33			`define ILMODE 31:27 // combined IL and mode field
34			`define OP1 26:21 // op1 field
35			`define RD 20:16 // RD: destination operand field
36			`define M 15 // M bit extends mode field
37			`define OT 15:13 // operand type field, including M bit
38			`define RS 12:8 // RS: first source operand field
39			`define MASK 7:5 // mask field
40			`define RT 4:0 // RT: second source operand field
41			`define MODE 29:27 // mode field
42			`define IM1 7:0 // immediate field in format B, 8 bits
43			`define IM1S 7 // sign bit of IM1
44			`define IM2E 47:32 // immediate field 2 in format E, 16 bits
45			`define IM2ES 47 // sign bit of IM2E
46			`define IM3E 53:48 // immediate field 3 in format E, 6 bits
47			`define IM3EX 55:48 // immediate field 3 in format E, extended into OP2
48			`define IM3EXS 55 // sign bit of IM3EX
49			`define OP2 55:54 // op2 field in format E
50			`define RU 60:56 // RU: third source operand field in format E
51			`define MODE2 63:61 // mode2 field in format E
52
53			`// Values for operand type`
54			`define OT_INT8 0 // 8 bit integer
55			`define OT_INT16 1 // 16 bit integer
56			`define OT_INT32 2 // 32 bit integer
57			`define OT_INT64 3 // 64 bit integer
58			`define OT_INT128 4 // 128 bit integer
59			`define OT_FLOAT32 5 // single precision float
60			`define OT_FLOAT64 6 // double precision float
61			`define OT_FLOAT128 7 // quadruple precision float
62			`define OT_FLOAT16 1 // half precision float
63
64			`// Values for instruction category`
65			`define CAT_MULTI 2'b00 // multi-format instruction
66			`define CAT_SINGLE 2'b01 // single-format instruction
67			`define CAT_JUMP 2'b10 // control transfer instruction, i.e. jump, call, return
68
69			`// Values for instruction format`
70			`define FORMAT_A 2'b00 // format A
71			`define FORMAT_E 2'b01 // format E
72			`define FORMAT_B 2'b10 // format B
73			`define FORMAT_C 2'b11 // format C
74
75			`// Values for use of registers`
76			`define REG_UNUSED 0 // register is unused
77			`define REG_OPERAND 1 // register is a general purpose register input operand
78			`define REG_VECTOR 2 // register is a vector register input operand
79			`define REG_SYSTEM 3 // register is a system register
80			`define REG_POINTER 4 // register is a memory base pointer (RS only)
81			`define REG_INDEX 4 // register is a scaled array index (RT only)
82			`define REG_LENGTH 5 // register specifies vector length (RT only)
83
84			`// Values for scale factor applied to index register`
85			`define SCALE_NONE 0 // index is not scaled
86			`define SCALE_OS 1 // index is scaled by operand size
87			`define SCALE_MINUS 2 // index is scaled by -1
88			`define SCALE_UNDEF 2'bXX // no index register
89
90			`// Values for address offset field`
91			`define OFFSET_NONE 0 // no offset to pointer register
92			`define OFFSET_1 1 // 8 bit offset in IM1, scaled by operand size
93			`define OFFSET_2 2 // 16 bit offset in IM2, not scaled
94			`define OFFSET_3 3 // 24, 32, or 64 bit offset in IM2 or IM4, not scaled
95
96			`// Values for immediate operand field`
97			`define IMMED_NONE 0 // no immediate operand
98			`define IMMED_1 1 // 8 bit immediate operand in IM1
99			`define IMMED_2 2 // 16 bit immediate operand in {IM2,IM1} for format C, or IM2 for format E
100			`define IMMED_3 3 // 32 or 64 bit immediate operand
101
102			`// Values for result type`
103			`define RESULT_REG 0 // result is a register, general purpose or vector
104			`define RESULT_SYS 1 // result is a system register.
105			`define RESULT_MEM 2 // result is a memory output
106			`define RESULT_NONE 3 // result is nothing or none of the above
107
108			`// Fallback option`
109			`define FALLBACK_NONE 0 // no fallback
110			`define FALLBACK_SOURCE 1 // first source register is used for fallback
111			`define FALLBACK_RU 2 // separate fallback register in RU field
112			`define FALLBACK_RS 3 // separate fallback register in RS field
113			`define FALLBACK_RT 4 // separate fallback register in RT field
114
115			`// Special register numbers in register file`
116			`define NUMCONTR 32 // numeric control register
117			`define THREADP 33 // thread pointer
118			`define DATAP 34 // data section pointer
119
120			`// Instruction OP1 values. These are not necessarily identical to the values in the assembler and emulator`
121			`define II_NOP 0 // nop instruction
122			`define II_MOVE 2 // move instruction
123			`define II_STORE 1 // write to memory
124			`define II_SIGN_EXTEND 4 // sign_extend
125			`define II_SIGN_EXTEND_ADD 5 // sign_extend_add
126			`define II_COMPARE 7 // compare
127			`define II_ADD 8 // add
128			`define II_SUB 9 // sub
129			`define II_SUB_REV 10 // sub_rev
130			`define II_MUL 11 // mul
131			`define II_MUL_HI 12 // mul_hi
132			`define II_MUL_HI_U 13 // mul_hi_u
133			`define II_DIV 14 // div
134			`define II_DIV_U 15 // div_u
135			`define II_DIV_REV 16 // div_rev
136			`define II_REM 18 // rem
137			`define II_REM_U 19 // rem_u
138			`define II_MIN 20 // min
139			`define II_MIN_U 21 // min_u
140			`define II_MAX 22 // max
141			`define II_MAX_U 23 // max_u
142			`define II_AND 26 // and
143			`define II_OR 27 // or
144			`define II_XOR 28 // xor
145			`define II_MUL_2POW 32 // mul_2pow
146			`define II_SHIFT_LEFT 32 // shift_left
147			`define II_ROTATE 33 // rotate
148			`define II_SHIFT_RIGHT_S 34 // shift_right_s
149			`define II_SHIFT_RIGHT_U 35 // shift_right_u
150			`define II_CLEAR_BIT 36 // clear_bit
151			`define II_SET_BIT 37 // set_bit
152			`define II_TOGGLE_BIT 38 // toggle_bit
153			`define II_TEST_BIT 39 // test_bit
154			`define II_TEST_BITS_AND 40 // test_bits_and
155			`define II_TEST_BITS_OR 41 // test_bits_or
156			`define II_ADD_FLOAT16 44 // add float16
157			`define II_SUB_FLOAT16 45 // sub float16
158			`define II_MUL_FLOAT16 46 // mul float16
159			`define II_MUL_ADD_FLOAT16 48 // mul_add float16
160			`define II_MUL_ADD 49 // mul_add
161			`define II_MUL_ADD2 50 // mul_add2
162			`define II_ADD_ADD 51 // add_add
163			`define II_SELECT_BITS 52 // select_bits
164			`define II_FUNNEL_SHIFT 53 // funnel_shift
165
166			`define II_STOREI 8 // write immediate to memory, format 2.5
167			`define II_FENCE 16 // fence instruction, format 2.5
168			`define II_CMPSWAP 18 // compare_swap instruction format, 2.5
169			`define II_XTR_STORE 32 // extract_store instruction
170			`define II_CLEAR 58 // clear instruction
171			`define II_WR_SPEC 33 // write_spec instruction
172			`define II_WR_CAPA 35 // write_capabilities instruction
173			`define II_ONE_OP 4 // multiformat instructions with one input have op1 <= II_ONE_OP
174			`define II_VECTORS_USED 59 // vectors_used instruction
175			`define II_UNCOND_JUMP 15 // unconditional jump or call <= this value
176			`define II_INDIRECT_JUMP 58 // indirect jump instructions in format 1.6B or 2.5.0
177			`define II_JUMP_RELATIVE 60 // multiway jump instructions in format 1.6A
178			`define II_RETURN 62 // return instruction
179			`define II_25_VECT 32 // first vector instruction in format 2.5A
180			`define II_31_VECT 32 // first vector instruction in format 3.1A
181
182			`define II_3OP_FIRST 48 // first multiformat instruction with three input operands
183			`define II_3OP_LAST 55 // last multiformat instruction with three input operands
184			`define II_COMPARE_FIRST 26 // first conditional jump instruction with no result register
185			`define II_COMPARE_LAST 47 // last conditional jump instruction with no result register
186
187			`// Instructions with IM3 used for option bits in format E. Used in addressgenerator.sv`
188			`// II_COMPARE, II_SIGN_EXTEND_ADD, II_TEST_BIT, II_TEST_BITS_AND, II_TEST_BITS_OR,`
189			// II_DIV, II_DIV_REV, `II_DIV_U
190			`// II_MUL_ADD_FLOAT16, II_MUL_ADD, II_MUL_ADD2, II_ADD_ADD,`
191
192			`// Instructions with first and last operands swapped`
193			`// II_SUB_REV, II_DIV_REV, II_MUL_ADD2`
194
195
196			`// Instructions with half precision operands`
197			`define II_ADD_H14 40 // half precision add format 1.4
198			`define II_MUL_H14 41 // half precision mul format 1.4
199
200			`// Other single format instructions`
201			`// Format 1.1C`
202			`define II_MOVEU11 3 // move 16 bits zero extended format 1.1C
203			`define II_SHIFT_MOVE_11 4 // shift left by IM1, move
204			`define II_MOVE11_LAST 5 // last instruction with 1 operand in format 1.1C
205			`define II_ADD11 6 // add 16 bits sign extended
206			`define II_MUL11 8 // multiply 16 bits sign extended
207			`define II_SHIFT_ADD_11 10 // shift left by IM1, add
208			`define II_SHIFT_AND_11 12 // shift left by IM1, and
209			`define II_SHIFT_OR_11 14 // shift left by IM1, or
210			`define II_SHIFT_XOR_11 16 // shift left by IM1, xor
211			`define II_ADDSHIFT16_11 18 // shift left by 16, add
212
213			`// Format 1.2B`
214			`define II_GETLEN_12 0 // getlen instruction format 1.2
215			`define II_GETNUM_12 1 // getnum instruction format 1.2
216
217			`// Format 1.8B`
218			`define II_SHIFT_ABS18 0 // abs
219			`define II_BITSCAN_18 2 // bitscan
220			`define II_ROUNDP2_18 3 // roundp2
221			`define II_POPCOUNT_18 4 // popcount
222			`define II_READ_SPEC18 32 // read_spec
223			`define II_WRITE_SPEC18 33 // read_spec
224			`define II_READ_CAP18 34 // read_capabilities
225			`define II_WRITE_CAP18 35 // write_capabilities
226			`define II_READ_PERF18 36 // read_perf. must be even
227			`define II_READ_PERFS18 37 // read_perfs = II_READ_PERF18 + 1
228			`define II_READ_SYS18 38 // read_sys
229			`define II_WRITE_SYS18 39 // write_sys
230			`define II_INPUT_18 62 // input instruction format 1.2 and 1.8
231			`define II_OUTPUT_18 63 // output instruction format 1.2 and 1.8
232
233			`// Format 2.x`
234			`define II_MOVE_BITS 0 // move bits instruction op1, single format 2.X.7-0.1
235			`define II2_MOVE_BITS 1 // move bits instruction op2, single format 2.X.7-0.1
236			`define II_MASK_LENGTH 1 // mask length instruction op1, single format 2.2.7-1.1
237			`define II2_MASK_LENGTH 1 // mask length instruction op2, single format 2.2.7-1.1
238			`define II_TRUTH_TAB3 8 // truth_tab3 instruction op1, single format 2.0.6 or 2.2.6 - 8.1
239			`define II2_TRUTH_TAB3 1 // truth_tab3 op2
240
241			`// Format 2.6A`
242			`define II_LOAD_HI_26 0 // load_hi instruction format 2.6
243
244			`// Format 2.9A`
245			`define II_MOVE_HI_29 0 // move high 32 bit instruction format 2.9
246			`define II_INSERT_HI_29 1 // insert_hi
247			`define II_ADDU_29 2 // add
248			`define II_SUBU_29 3 // sub
249			`define II_ADD_HI_29 4 // add
250			`define II_AND_HI_29 5 // and high
251			`define II_OR_HI_29 6 // or high
252			`define II_XOR_HI_29 7 // xor high
253			`define II_ADDRESS_29 32 // address
254
255			`// jump instructions`
256			`define IJ_SUB_JZ 0 // subtract, jump if zero
257			`define IJ_SUB_JNEG 2 // subtract, jump if negative
258			`define IJ_SUB_JPOS 4 // subtract, jump if positive
259			`define IJ_SUB_JOVFLW 6 // subtract, jump if overflow
260			`define IJ_SUB_JBORROW 8 // subtract, jump if borrow
261			`define IJ_AND_JZ 10 // and, jump if zero
262			`define IJ_OR_JZ 12 // or, jump if zero
263			`define IJ_XOR_JZ 14 // xor, jump if zero
264			`define IJ_ADD_JZ 16 // add, jump if zero
265			`define IJ_ADD_JNEG 18 // add, jump if negative
266			`define IJ_ADD_JPOS 20 // add, jump if positive
267			`define IJ_ADD_JOVFLW 22 // add, jump if overflow
268			`define IJ_ADD_JCARRY 24 // add, jump if carry
269			`define IJ_TEST_BIT_JTRUE 26 // test single bit, jump if 1
270			`define IJ_TEST_BITS_AND 28 // test bits, jump if all 1
271			`define IJ_TEST_BITS_OR 30 // test bits, jump if all 1
272			`define IJ_COMPARE_JEQ 32 // compare, jump if equal
273			`define IJ_COMPARE_JSB 34 // compare, jump if signed below
274			`define IJ_COMPARE_JSA 36 // compare, jump if signed above
275			`define IJ_COMPARE_JUB 38 // compare, jump if unsigned below
276			`define IJ_COMPARE_JUA 40 // compare, jump if unsigned above
277			`define IJ_INC_COMP_JBELOW 48 // increment. jump if below n
278			`define IJ_INC_COMP_JABOVE 50 // increment. jump if above n
279			`define IJ_SUB_MAXLEN_JPOS 52 // subtract max vector length, jump while positive
280			`define IJ_LAST_CONDITIONAL 55 // last two-way conditional jump
281			`define IJ_JUMP_INDIRECT_REG 58 // indirect jump to register, format 1.7
282			`define IJ_JUMP_INDIRECT_MEM 58 // indirect jump to memory address, format 1.6 and 2.5.0
283			`define IJ_JUMP_DIRECT 58 // direct unconditional jump, format 2.5.4 and 3.1.1
284			`define IJ_JUMP_RELATIVE 60 // jump with relative pointers in memory, format 1.6 and 2.5.0
285			`define IJ_RETURN 62 // return, format 1.6
286			`define IJ_SYSRETURN 62 // system return, format 1.7
287			`define IJ_SYSCALL 63 // system call
288			`define IJ_TRAP 63 // trap (software interrupt, debug breakpoint), format 1.7
289			`define IJ_CONDITIONAL_TRAP 63 // conditional trap. Format 2.5.3. Not supported.
290
291			`// Instruction ID's opx in execution unit for single-format instructions`
292			`// These values are arbitrary and may be changed. Must be bigger than 63`
293			`define IX_UNDEF 127 // unknown instruction
294			`define IX_ABS 64 // abs format 1.8
295			`define IX_BIT_SCAN 66 // bitscan format 1.8
296			`define IX_ROUNDP2 67 // roundp2 format 1.8
297			`define IX_POPCOUNT 68 // popcount format 1.8
298			`define IX_READ_SPEC 69 // bitscan format 1.8
299			`define IX_WRITE_SPEC 70 // write_spec format 1.8
300			`define IX_READ_CAPABILITIES 71 // read_capab format 1.8
301			`define IX_WRITE_CAPABILITIES 72 // write_capab format 1.8
302			`define IX_READ_PERF 74 // read_perf format 1.8
303			`define IX_READ_PERFS 75 // read_perfs format 1.8
304			`define IX_READ_SYS 76 // read_sys format 1.8
305			`define IX_WRITE_SYS 77 // write_sys format 1.8
306			`define IX_INPUT 78 // input format 1.8
307			`define IX_OUTPUT 79 // output format 1.8
308			`define IX_MOVE_BITS1 80 // move bits instruction, shifting left
309			`define IX_MOVE_BITS2 81 // move bits instruction, shifting right
310			`define IX_SHIFT32 82 // move format 2.9: shift left 32 bits
311			`define IX_INSERT_HI 83 // insert_high format 2.9. replace high 32 bits
312			`define IX_ADDRESS 84 // address instruction format 2.9. (replaced by move)
313			`define IX_TRUTH_TAB3 85 // truth_tab3 instruction
314			`define IX_UNCOND_JUMP 90 // unconditional direct self-relative jump
315			`define IX_INDIRECT_JUMP 91 // indirect jump to register or memory
316			`define IX_RELATIVE_JUMP 92 // indirect jump with table of relative addresses
317
318