OpenCores
URL https://opencores.org/ocsvn/forwardcom/forwardcom/trunk

Subversion Repositories forwardcom

[/] [forwardcom/] [trunk/] [lcd.sv] - Blame information for rev 79

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 4 Agner 
//////////////////////////////////////////////////////////////////////////////////
2 
// Engineer: Agner Fog
3 
//
4 
// Create Date:    2020-06-22
5 
// Last modified:  2020-06-29
6 
// Module Name:    decoder
7 
// Project Name:   ForwardCom soft core
8 
// Target Devices: Artix 7
9 
// Tool Versions:  Vivado v. 2020.1
10 
// License:        CERN-OHL-W v. 2 or later
11 
// Description:    Driver for LCD displays
12 
// Two LCD displays with each 4 lines x 20 characters
13 
//////////////////////////////////////////////////////////////////////////////////
14 
 
15 
`include "defines.vh"
16 
 
17 
module lcd
18 
  #(parameter numrows = 8,               // number of lines of combined displays (2 - 8)
19 
    parameter numcolumns = 20,           // number of characters per line
20 
    parameter rows_per_display = 4)      // number of rows per display unit
21 
 (input       clock,                     // system clock 100 MHz
22 
  input       reset,                     // reset and clear
23 
  input [4:0] x,                         // column number (0 = left)
24 
  input [2:0] y,                         // row number (0 = top)
25 
  input [7:0] text[0:numcolumns-1],      // text for one line
26 
  input [4:0] text_length,               // length of text
27 
  input       start,                     // start writing
28 
  input       eol,                       // pad with spaces until end of line
29 
  output reg  lcd_rs,                    // LCD RS pin
30 
        output reg  [1:0] lcd_e,               // enable pins for two LCD displays
31 
        output reg  [3:0] lcd_data,            // LCD data, 4 bit bus
32 
        output reg  ready                      // finished writing. ready for next line
33 
);
34 
 
35 
localparam count_bits = 14;              // number of bits in clock divider counter
36 
localparam count_max = (2**count_bits)-1;// maximum count
37 
 
38 
logic [7:0] rowaddress;                  // command for setting row address
39 
reg [count_bits-1:0] counter = 0;        // clock divider
40 
reg [7:0] delay;                         // delay counter
41 
reg [3:0] state = 0;                     // state machine for initialization
42 
                                         // 0  -  9: initialization sequence
43 
                                         // 10 - 11: set x,y position
44 
                                         // 12 - 13: write characters
45 
                                         // 15:      finished
46 
reg [7:0] text_buffer [0:numcolumns-1];  // copy of input text
47 
reg [4:0] column;                        // text column
48 
reg [2:0] row;                           // text row
49 
reg [4:0] text_count;                    // count down characters in text
50 
reg       eol_save;                      // copy of eol
51 
 
52 
/* initialization sequence:
53 
The display can receive data in 4-bit or 8-bit mode. We are using 4-bit mode,
54 
sending 4 bits at a time, with only the upper four bits connected.
55 
First, we send 8'H3x three times to get into 8-bit mode. Then 8'H2x to get
56 
into 4-bit mode. The remaining numbers are 8-bit pairs:
57 
8'H28: multi-line mode (the first needs a long delay)
58 
8'H01: reset (needs long delay)
59 
8'H0C: display on, no cursor, no blink
60 
//8'H06 forward direction
61 
*/
62 
reg [3:0] initialization_sequence [10] = {3, 3, 3, 2, 2, 8, 0, 1, 0, 12 };
63 
 
64 
always_comb begin
65 
    // command to set row address
66 
    if (rows_per_display == 4) begin
67 
        case (row[1:0]) // 4 lines per display
68 
        0: rowaddress = 8'H80 + column;
69 
        1: rowaddress = 8'HC0 + column;
70 
        2: rowaddress = 8'H80 + numcolumns + column;
71 
        3: rowaddress = 8'HC0 + numcolumns + column;
72 
        endcase
73 
    end else begin
74 
        case (row[0])   // 2 lines per display
75 
        0: rowaddress = 8'H80 + column;
76 
        1: rowaddress = 8'HC0 + column;
77 
        endcase
78 
    end
79 
end
80 
 
81 
always_ff @(posedge clock) begin
82 
    lcd_e <= 0;
83 
 
84 
    if (reset) begin
85 
        // reset
86 
        counter <= 0;
87 
        delay <= 8'H80;
88 
        state <= 0;
89 
 
90 
    end else if (start && state == 15) begin
91 
        // write command received
92 
        text_buffer <= text;
93 
        column <= x;
94 
        row <= y;
95 
        text_count <= text_length;
96 
        eol_save <= eol;
97 
        counter <= 0;
98 
        state <= 10;
99 
 
100 
    end else begin
101 
        counter <= counter + 1; // 2**count_bits / 100MHz = 160 µs
102 
        if (state < 10) begin
103 
 
104 
            // initialization sequence
105 
            lcd_rs <= 0;
106 
            if (delay > 0) begin
107 
                if (counter == count_max) delay <= delay - 1;
108 
            end else begin
109 
                lcd_data <= initialization_sequence[state];
110 
                lcd_e[0] <= counter[count_bits-1:count_bits-2] == 2'b01; // generate pulse for display unit 0
111 
                lcd_e[1] <= counter[count_bits-1:count_bits-2] == 2'b01; // generate pulse for display unit 1
112 
                if (counter == count_max) begin
113 
                    if (state == 9) state <= 15; // finished
114 
                    else state <= state + 1;     // next state
115 
                    delay <= 8'H10;
116 
                end
117 
            end
118 
 
119 
        end else if (state < 12) begin
120 
 
121 
            // set (x,y) position
122 
            lcd_rs <= 0;
123 
            if (delay > 0) begin
124 
                if (counter == count_max) delay <= delay - 1;
125 
            end else begin
126 
                lcd_data <= ~state[0] ? rowaddress[7:4] : rowaddress[3:0];
127 
                if (row < rows_per_display)
128 
                     lcd_e[0] <= counter[count_bits-1:count_bits-2] == 2'b01; // generate pulse
129 
                else lcd_e[1] <= counter[count_bits-1:count_bits-2] == 2'b01; // generate pulse
130 
                if (counter == count_max) begin
131 
                    state <= state + 1;
132 
                    delay <= 8'H10;
133 
                end
134 
            end
135 
 
136 
        end else if (state < 15) begin
137 
 
138 
            // write characters
139 
            lcd_rs <= 1;
140 
            if (delay > 0) begin
141 
                if (counter == count_max) delay <= delay - 1;
142 
            end else begin
143 
                if (text_count > 0) begin
144 
                    // write character
145 
                    lcd_data <= ~state[0] ? text_buffer[0][7:4] : text_buffer[0][3:0];
146 
                    if (row < rows_per_display)
147 
                         lcd_e[0] <= counter[count_bits-1:count_bits-2] == 2'b01; // generate pulse
148 
                    else lcd_e[1] <= counter[count_bits-1:count_bits-2] == 2'b01; // generate pulse
149 
                end else if (eol_save) begin
150 
                    lcd_data <= ~state[0] ? 2 : 0;                                // write space
151 
                    if (row < rows_per_display)
152 
                         lcd_e[0] <= counter[count_bits-1:count_bits-2] == 2'b01; // generate pulse
153 
                    else lcd_e[1] <= counter[count_bits-1:count_bits-2] == 2'b01; // generate pulse
154 
                end
155 
 
156 
                if (counter == count_max) begin
157 
                    if (state[0]) begin
158 
                        column <= column + 1;                                     // count up column index
159 
                        if (text_count != 0) text_count <= text_count - 1;        // count down number of characters
160 
                        for (int i = 0; i < numcolumns-1; i++) begin
161 
                            text_buffer[i] <= text_buffer[i+1];                   // shift down to get next character
162 
                        end
163 
                    end
164 
                    if (state[0] && (column == numcolumns-1 || (text_count == 0 && !eol_save))) begin
165 
                        state <= 15;                                              // finished
166 
                    end else begin
167 
                        state[0] <= ~state[0];
168 
                    end
169 
                    // delay <= 8'H01;
170 
                end
171 
            end
172 
        end else begin
173 
            // state = 15. finished
174 
            lcd_e <= 0;
175 
        end
176 
    end
177 
    if (state == 15) ready <= 1;
178 
    else ready <= 0;
179 
 
180 
end
181 
 
182 
 
183 
endmodule

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.