Subversion Repositories ft816float

// ============================================================================

//        __

//   \\__/ o\    (C) 2006-2019  Robert Finch, Waterloo

//    \  __ /    All rights reserved.

//     \/_//     robfinch<remove>@finitron.ca

//       ||

//

//      f2i.v

//              - convert floating point to integer

//              - single cycle latency floating point unit

//              - parameterized width

//              - IEEE 754 representation

//

//

// This source file is free software: you can redistribute it and/or modify 

// it under the terms of the GNU Lesser General Public License as published 

// by the Free Software Foundation, either version 3 of the License, or     

// (at your option) any later version.                                      

//                                                                          

// This source file is distributed in the hope that it will be useful,      

// but WITHOUT ANY WARRANTY; without even the implied warranty of           

// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the            

// GNU General Public License for more details.                             

//                                                                          

// You should have received a copy of the GNU General Public License        

// along with this program.  If not, see <http://www.gnu.org/licenses/>.    

//                                                                          

//      i2f - convert integer to floating point

//  f2i - convert floating point to integer

//

// ============================================================================

module f2i

#(      parameter WID = 32)

(

        input clk,

        input ce,

        input [WID-1:0] i,

        output [WID-1:0] o,

        output overflow

);

`include "fpSize.sv"

wire [MSB:0] maxInt  = {MSB{1'b1}};              // maximum unsigned integer value

wire [EMSB:0] zeroXp = {EMSB{1'b1}};     // simple constant - value of exp for zero

// Decompose fp value

reg sgn;                                                                        // sign

always @(posedge clk)

        if (ce) sgn = i[MSB];

wire [EMSB:0] exp = i[MSB-1:FMSB+1];             // exponent

wire [FMSB+1:0] man = {exp!=0,i[FMSB:0]};  // mantissa including recreate hidden bit

wire iz = i[MSB-1:0]==0;                                  // zero value (special)

assign overflow  = exp - zeroXp > MSB;          // lots of numbers are too big - don't forget one less bit is available due to signed values

wire underflow = exp < zeroXp - 1;                      // value less than 1/2

wire [7:0] shamt = MSB - (exp - zeroXp); // exp - zeroXp will be <= MSB

wire [MSB+1:0] o1 = {man,{EMSB+1{1'b0}},1'b0} >> shamt;  // keep an extra bit for rounding

wire [MSB:0] o2 = o1[MSB+1:1] + o1[0];            // round up

reg [MSB:0] o3;

always @(posedge clk)

        if (ce) begin

                if (underflow|iz)

                        o3 <= 0;

                else if (overflow)

                        o3 <= maxInt;

                // value between 1/2 and 1 - round up

                else if (exp==zeroXp-1)

                        o3 <= 1;

                // value > 1

                else

                        o3 <= o2;

        end

assign o = sgn ? -o3 : o3;                                      // adjust output for correct signed value

endmodule

module f2i_tb();

wire ov0,ov1;

wire [31:0] io0,io1;

reg clk;

initial begin

        clk = 0;

end

always #10 clk = ~clk;

f2i #(32) u1 (.clk(clk), .ce(1'b1), .i(32'h3F800000), .o(io1), .overflow(ov1) );

f2i #(32) u2 (.clk(clk), .ce(1'b1), .i(32'h00000000), .o(io0), .overflow(ov0) );

f2i #(80) u3 (.clk(clk), .ce(1'b1), .i(80'h3FF80000000000000000), .o(io1), .overflow(ov1) );

endmodule