Subversion Repositories ft816float

// ============================================================================

//        __

//   \\__/ o\    (C) 2017-2018  Robert Finch, Waterloo

//    \  __ /    All rights reserved.

//     \/_//     robfinch<remove>@finitron.ca

//       ||

//

//      DivGoldschmidt.v

//              

//

// This source file is free software: you can redistribute it and/or modify 

// it under the terms of the GNU Lesser General Public License as published 

// by the Free Software Foundation, either version 3 of the License, or     

// (at your option) any later version.                                      

//                                                                          

// This source file is distributed in the hope that it will be useful,      

// but WITHOUT ANY WARRANTY; without even the implied warranty of           

// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the            

// GNU General Public License for more details.                             

//                                                                          

// You should have received a copy of the GNU General Public License        

// along with this program.  If not, see <http://www.gnu.org/licenses/>.    

//                                                                          

//

// ============================================================================

//

`include "fpConfig.sv"

module DivGoldschmidt(rst, clk, ld, a, b, q, done, lzcnt);

parameter FPWID=32;

parameter WHOLE=16;

parameter POINTS=16;

parameter LEFT=1'b1;

localparam SIZE=FPWID+WHOLE;

localparam POINTS2 = POINTS+WHOLE;

input rst;

input clk;

input ld;

input [FPWID-1:0] a;

input [FPWID-1:0] b;

output reg [FPWID*2-1:0] q;

output reg done;

output reg [7:0] lzcnt;

parameter IDLE = 2'd0;

parameter DIV = 2'd1;

parameter DONE = 2'd2;

parameter DIV2 = 2'd3;

integer n;

// Scale D so it is between 0 < D < 1 (shift)

reg [SIZE-1:0] F;

reg [SIZE*3-1:0] N, D;

wire [SIZE*3-1:0] N1, D1;

assign N1 = N * F;

assign D1 = D * F;

reg [1:0] state = IDLE;

reg [7:0] count = 0;

reg [7:0] lzcnt2;

wire [7:0] shft;

// Count the leading zeros on the b side input. Determines how much

// shifting is required.

always @*

begin

        lzcnt2 = 8'd0;

        if (b[FPWID-1]==1'b0)

                for (n = FPWID-2; n >= 0; n = n - 1)

                        if(b[n] && lzcnt2==8'd0)

                                lzcnt2 = (FPWID-1)-n;

end

// Count the leading zeros in the output. the float divider uses this.

always @*

begin

        lzcnt = 8'd0;

        if (q[FPWID*2-1]==1'b0)

                for (n = FPWID*2-2; n >= 0; n = n - 1)

                        if(q[n] && lzcnt==8'd0)

                                lzcnt = (FPWID*2-1)-n;

end

wire shift_left = lzcnt2 > WHOLE;

assign shft = shift_left ? lzcnt2-WHOLE : WHOLE-lzcnt2;

//assign done = (state==IDLE && !ld)||state==DONE;

always @(posedge clk)

if (rst) begin

        done <= 1'b0;

        count <= 6'd0;

        state <= IDLE;

end

else begin

        done <= 1'b0;

case(state)

IDLE:

        begin

                if (ld) begin

                        // Shifting the numerator and denomintor right or left using a barrel

                        // or funnel shifter is what gives Goldschmidt a lot of it's performance.

                        // Most of the divide is being performed by shifting.

                        // For most floating point numbers shifting left isn't required as the

                        // number is always between 1.0 and 2.0. Instead typically only a single

                        // shift to the right is required. For fixed point numbers however, we

                        // probably want to be able to shift left, hence the LEFT parameter.

                        // With no left shifting the only impact is for denormal numbers which

                        // take longer for the divide to converge.

                        if (shift_left) begin

                                if (LEFT) begin

                                        N <= {16'd0,a,{WHOLE{1'b0}}} << shft;

                                        D <= {16'd0,b,{WHOLE{1'd0}}} << shft;

                                        F <= {16'd2,{POINTS2{1'b0}}} - ({b,{WHOLE{1'd0}}} << shft);

                                end

                                else begin

                                        N <= {16'd0,a,{WHOLE{1'b0}}};

                                        D <= {16'd0,b,{WHOLE{1'd0}}};

                                        F <= {16'd2,{POINTS2{1'b0}}} - ({b,{WHOLE{1'd0}}});

                                end

                        end

                        else begin

                                N <= {16'd0,a,{WHOLE{1'b0}}} >> shft;

                                D <= {16'd0,b,{WHOLE{1'd0}}} >> shft;

                                F <= {16'd2,{POINTS2{1'b0}}} - ({b,{WHOLE{1'd0}}} >> shft);

                        end

                        count <= 0;

                        state <= DIV;

                end

        end

DIV:

        begin

                $display("C: %d N: %x D: %x F: %x", count, N,D,F);

                N <= N1[SIZE*3-1:POINTS2] + N1[POINTS2-1];

                D <= D1[SIZE*3-1:POINTS2] + D1[POINTS2-1];

                F <= {16'd2,{POINTS2{1'd0}}} - (D1[SIZE*3-1:POINTS2] + D1[POINTS2-1]);

//              q <= N1[SIZE*2-1:POINTS2] + N1[POINTS2-1];

                if (D[SIZE*3-1:0]=={2'h1,{POINTS2{1'd0}}})

                        state <= DONE;

                count <= count + 1;

        end

DONE:

        begin

                done <= 1'b1;

                q <= N[SIZE*3-1:0];

                state <= IDLE;

        end

endcase

end

endmodule

module G_divider_tb();

parameter FPWID=4;

reg rst;

reg clk;

reg ld;

wire done;

wire [FPWID*2-1:0] qo;

reg [3:0] state;

reg [3:0] a, b;

reg [7:0] count;

initial begin

        clk = 1;

        rst = 0;

        #100 rst = 1;

        #100 rst = 0;

        #100 ld = 1;

        #150 ld = 0;

end

always #10 clk = ~clk;  //  50 MHz

always @(posedge clk)

if (rst) begin

        state <= 3'd0;

        count = 0;

end

else begin

case(state)

3'd0:

        begin

                ld <= 1;

                a <= count[7:4];

                b <= count[3:0];

        end

3'd1:

        if (done) begin

                $display("C: %x Q: %x  f: %x", count, qo, f0);

                state <= 3'd2;

        end

3'd2:

        begin

                count <= count + 8'd1;

                state <= 3'd0;

        end

endcase

end

DivGoldschmidt #(.FPWID(FPWID),.WHOLE(1),.POINTS(3)) u00

(

        .rst(rst),

        .clk(clk),

        .ld(ld),

//      .sgn(1'b1),

//      .isDivi(1'b0),

        .a(a),

        .b(b),

//      .imm(64'd123),

        .q(qo),

//      .ro(ro),

//      .dvByZr(),

        .done(done),

        .lzcnt()

);

endmodule