Subversion Repositories ft816float

// ============================================================================

//        __

//   \\__/ o\    (C) 2006-2022  Robert Finch, Waterloo

//    \  __ /    All rights reserved.

//     \/_//     robfinch@finitron.ca

//       ||

//

//      dfmul.v

//    Decimal Float multiplier primitive

//

// BSD 3-Clause License

// Redistribution and use in source and binary forms, with or without

// modification, are permitted provided that the following conditions are met:

//

// 1. Redistributions of source code must retain the above copyright notice, this

//    list of conditions and the following disclaimer.

//

// 2. Redistributions in binary form must reproduce the above copyright notice,

//    this list of conditions and the following disclaimer in the documentation

//    and/or other materials provided with the distribution.

//

// 3. Neither the name of the copyright holder nor the names of its

//    contributors may be used to endorse or promote products derived from

//    this software without specific prior written permission.

//

// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE

// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

//

// ============================================================================

module dfmul(clk, ld, a, b, p, done);

parameter N=33;

localparam FPWID = N*4;

parameter RADIX = 10;

localparam FPWID1 = FPWID;//((FPWID+2)/3)*3;    // make FPWIDth a multiple of three

localparam DMSB = FPWID1-1;

input clk;

input ld;

input [FPWID-1:0] a;

input [FPWID-1:0] b;

output reg [FPWID*2-1:0] p;

output reg done;

reg [1:0] st;

parameter PREP = 2'd0;

parameter ADDN = 2'd1;

parameter DONE = 2'd2;

reg [7:0] dcnt;                         // digit count

reg [9:0] clkcnt;

reg [FPWID*2-1:0] pi = 0;

reg [FPWID-1:0] ai = 0;

reg [FPWID*2-1:0] bi = 0;

wire [FPWID*2-1:0] sum;

reg [5:0] digcnt;

BCDAdd8NClk #(.N(FPWID/4)) ubcdm1

(

        .clk(clk),

        .a(pi),

        .b(bi),

        .o(sum),

        .ci(1'b0),

        .co()

);

always_ff @(posedge clk)

begin

case(st)

ADDN:

        begin

                clkcnt <= clkcnt + 1'd1;

                if (ai[FPWID-1:FPWID-4]!=4'h0) begin

                        if (digcnt=='d0) begin

                                pi <= sum;

                                digcnt <= 6'd3;

                                ai[FPWID-1:FPWID-4] <= ai[FPWID-1:FPWID-4] - 1'd1;

                        end

                        else

                                digcnt <= digcnt - 1'd1;

                end

                else begin

                        ai <= {ai,4'h0};

                        bi <= {4'h0,bi[FPWID*2-1:4]};

                        pi <= pi;

                        dcnt <= dcnt - 1'd1;

                        if (dcnt=='d0)

                                st <= DONE;

                end

        end

DONE:

        begin

                p <= pi;

                done <= 1'b1;

        end

default:

        st <= ADDN;

endcase

if (ld) begin

        clkcnt <= 10'd0;

        digcnt <= 6'd3;

        dcnt <= (FPWID*2)/4;

        pi <= {FPWID*2{1'b0}};

        ai <= a;

        bi <= {4'h0,b,{FPWID-4{1'b0}}};

        st <= ADDN;

        done <= 1'b0;

end

end

endmodule

module dfmul_tb();

reg clk;

reg ld;

reg [107:0] a, b;

wire [215:0] p;

initial begin

        clk = 1'b0;

        ld = 1'b0;

        a = 108'h099_00000000_00000000_00000000;

        b = 108'h560_00000000_00000000_00000000;

        #20 ld = 1'b1;

        #40 ld = 1'b0;

end

always #5 clk = ~clk;

dfmul #(27) u1 (

        .clk(clk),

        .ld(ld),

        .a(a),

        .b(b),

        .p(p),

        .done(done)

);

endmodule