Subversion Repositories ft816float

// ============================================================================

//        __

//   \\__/ o\    (C) 2020-2022  Robert Finch, Waterloo

//    \  __ /    All rights reserved.

//     \/_//     robfinch@finitron.ca

//       ||

//

//      mult32x32combo.sv

//  - Karatsuba multiply

//  - combinational logic only

//

// BSD 3-Clause License

// Redistribution and use in source and binary forms, with or without

// modification, are permitted provided that the following conditions are met:

//

// 1. Redistributions of source code must retain the above copyright notice, this

//    list of conditions and the following disclaimer.

//

// 2. Redistributions in binary form must reproduce the above copyright notice,

//    this list of conditions and the following disclaimer in the documentation

//    and/or other materials provided with the distribution.

//

// 3. Neither the name of the copyright holder nor the names of its

//    contributors may be used to endorse or promote products derived from

//    this software without specific prior written permission.

//

// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE

// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

//

// ============================================================================

`define KARATSUBA       1

`ifdef KARATSUBA

module mult32x32combo(a, b, o);

input [31:0] a;

input [31:0] b;

output reg [63:0] o='d0;

reg [15:0] a2='d0, b2='d0;

reg [16:0] a1='d0, b1='d0;

reg [31:0] z0, z2, z0a, z2a, z0b, z2b, z0c, z2c, z0d, z2d, p3;

reg [32:0] p4;

reg [32:0] z1;  // extra bit for carry

reg sgn2, sgn3, sgn4;

always_comb

        a1 <= a[15: 0] - a[31:16];  // x0-x1

always_comb

        b1 <= b[31:16] - b[15: 0];  // y1-y0

always_comb

        a2 <= a1[16] ? -a1 : a1;

always_comb

        b2 <= b1[16] ? -b1 : b1;

always_comb

  sgn2 <= a1[16]^b1[16];

always_comb

  sgn3 <= sgn2;

always_comb

  sgn4 <= sgn3;

mult16x16combo u1 (

  .a(a[31:16]),

  .b(b[31:16]),

  .o(z2)          // z2 = x1 * y1

);

mult16x16combo u2 (

  .a(a[15:0]),

  .b(b[15:0]),

  .o(z0)          // z0 = x0 * y0

);

mult16x16combo u3 (

  .a(a2[15:0]),

  .b(b2[15:0]),

  .o(p3)        // p3 = abs(x0-x1) * abs(y1-y0)

);

always_comb

        p4 <= sgn3 ? -p3 : p3;

always_comb

  z2a <= z2;

always_comb

  z0a <= z0;

always_comb

  z2b <= z2a;

always_comb

  z0b <= z0a;

always_comb

  z2c <= z2b;

always_comb

  z0c <= z0b;

always_comb

        z1 <= {{32{p4[32]}},p4} + z2c + z0c;

always_comb

  z2d <= z2c;

always_comb

  z0d <= z0c;

always_comb

        o <= {z2d,z0d} + {z1,16'd0};

endmodule

`else

// This version of the multiply has a parameterized pipeline depth and allows

// the tools to perform the multiply. Relies on the ability of tools to retime.

module mult32x32combo(a, b, o);

parameter DEP = 6;

input [31:0] a;

input [31:0] b;

output reg [63:0] o;

reg [63:0] prod [0:DEP-1];

reg [63:0] prd;

integer n;

always_comb

        prd <= a * b;

always_comb

        prod[0] <= prd;

always_comb

        for (n = 0; n < DEP - 1; n = n + 1)

                prod[n+1] <= prod[n];

always_comb

        o <= prod[DEP-1];

endmodule

`endif