Subversion Repositories ft816float

`timescale 1ns / 1ps

// ============================================================================

//        __

//   \\__/ o\    (C) 2006-2020  Robert Finch, Waterloo

//    \  __ /    All rights reserved.

//     \/_//     robfinch<remove>@finitron.ca

//       ||

//

//      DFPDivider_tb.v

//              - decimal floating point divider test bench

//

// BSD 3-Clause License

// Redistribution and use in source and binary forms, with or without

// modification, are permitted provided that the following conditions are met:

//

// 1. Redistributions of source code must retain the above copyright notice, this

//    list of conditions and the following disclaimer.

//

// 2. Redistributions in binary form must reproduce the above copyright notice,

//    this list of conditions and the following disclaimer in the documentation

//    and/or other materials provided with the distribution.

//

// 3. Neither the name of the copyright holder nor the names of its

//    contributors may be used to endorse or promote products derived from

//    this software without specific prior written permission.

//

// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE

// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

//

//                                                                          

//      Floating Point Multiplier / Divider

//

//      This multiplier/divider handles denormalized numbers.

//      The output format is of an internal expanded representation

//      in preparation to be fed into a normalization unit, then

//      rounding. Basically, it's the same as the regular format

//      except the mantissa is doubled in size, the leading two

//      bits of which are assumed to be whole bits.

//

//

// ============================================================================

module DFPDivide_tb();

parameter N=33;

reg rst;

reg clk;

reg [15:0] adr;

reg [N*4+16+4-1:0] a,b;

wire [N*4+16+4-1:0] o, sqrto;

reg [N*4+16+4-1:0] ad,bd;

wire [N*4+16+4-1:0] od;

reg [3:0] rm;

wire done;

integer n;

reg [N*4+16+4-1:0] a1, b1;

reg [39:0] sum_cc;

wire [63:0] doubleA = {a[31], a[30], {3{~a[30]}}, a[29:23], a[22:0], {29{1'b0}}};

wire [63:0] doubleB = {b[31], b[30], {3{~b[30]}}, b[29:23], b[22:0], {29{1'b0}}};

integer outfile;

initial begin

        rst = 1'b0;

        clk = 1'b0;

        adr = 0;

        a = $urandom(1);

        b = 1;

        #20 rst = 1;

        #50 rst = 0;

        #5000000  $fclose(outfile);

        #10 $finish;

end

always #5

        clk = ~clk;

genvar g;

generate begin : gRand

        for (g = 0; g < N*4+16+4; g = g + 4) begin

                always @(posedge clk) begin

                        a1[g+3:g] <= $urandom() % 10;

                        b1[g+3:g] <= $urandom() % 10;

                end

        end

end

endgenerate

reg [9:0] count;

always @(posedge clk)

if (rst) begin

        adr <= 0;

        count <= 0;

        sum_cc = 0;

end

else

begin

  if (adr==0) begin

    outfile = $fopen("d:/cores2020/rtf64/v2/rtl/verilog/cpu/fpu/test_bench/DFPDivide_tvo.txt", "wb");

    $fwrite(outfile, "rm ------ A ------  ------- B ------  - DUT Quotient - - Square root -\n");

    sum_cc = 0;

  end

        count <= count + 1;

        if (count > 1000)

                count <= 1'd1;

        if (count==2) begin

                a[N*4+16+4-1:0] <= a1;

                b[N*4+16+4-1:0] <= b1;

                a[N*4+16+4-1:N*4+16+4-4] <= 4'h5;

                b[N*4+16+4-1:N*4+16+4-4] <= 4'h5;

                rm <= adr[15:13];

                //ad <= memd[adr][63: 0];

                //bd <= memd[adr][127:64];

        end

        if (adr==1 && count==2) begin

                a <= 152'h50000700000000000000000000000000000000;

                b <= 152'h50000200000000000000000000000000000000;

        end

        if (adr==1 && count==2) begin

                a <= 152'h50000100000000000000000000000000000000;

                b <= 152'h50000300000000000000000000000000000000;

        end

        if (adr==2 && count==2) begin

                a <= 152'h50000900000000000000000000000000000000;

                b <= 152'h50000200000000000000000000000000000000;

        end

        if (adr==3 && count==2) begin

                a <= 152'h50000000000000000000000000000000000000;

                b <= 152'h50000000000000000000000000000000000000;

        end

        if (adr==4 && count==2) begin

                a <= 152'h50001100000000000000000000000000000000;

                b <= 152'h50001100000000000000000000000000000000;

        end

        if (adr==4 && count==2) begin

                a <= 152'h50000100000000000000000000000000000000;

                b <= 152'h50000300000000000000000000000000000000;

        end

        if (adr==5 && count==2) begin

                a <= 152'h50002100000000000000000000000000000000;

                b <= 152'h50000300000000000000000000000000000000;

        end

        if (adr==6 && count==2) begin

                a <= 152'h50002987654321000000000000000000000000;

                b <= 152'h50000300000000000000000000000000000000;

        end

        if (count > 1000) begin

                sum_cc = sum_cc + u6.u1.u2.clkcnt;

          $fwrite(outfile, "%h\t%h\t%h\t%h\t%h\t%d\t%f\n", rm, a, b, o, sqrto, u6.u1.u2.clkcnt, $itor(sum_cc) / $itor(adr));

                adr <= adr + 1;

        end

end

//fpMulnr #(64) u1 (clk, 1'b1, a, b, o, rm);//, sign_exe, inf, overflow, underflow);

DFPDividenr #(.N(N)) u6 (

  .rst(rst),

  .clk(clk),

  .ce(1'b1),

  .ld(count==3),

  .op(1'b0),

  .a(a),

  .b(b),

  .o(o),

  .rm(rm),

  .done(done),

  .sign_exe(),

  .inf(),

  .overflow(),

  .underflow()

  );

DFPSqrtnr #(.N(N)) u1 (rst, clk, 1'b1, count==3, a, sqrto, rm);//, sign_exe, inf, overflow, underflow);

endmodule