Subversion Repositories gamepads

-------------------------------------------------------------------------------

--

-- GCpad controller core

--

-- $Id: gcpad_tx.vhd,v 1.2 2004-10-08 20:51:59 arniml Exp $

--

-- Copyright (c) 2004, Arnim Laeuger (arniml@opencores.org)

--

-- All rights reserved

--

-- Redistribution and use in source and synthezised forms, with or without

-- modification, are permitted provided that the following conditions are met:

--

-- Redistributions of source code must retain the above copyright notice,

-- this list of conditions and the following disclaimer.

--

-- Redistributions in synthesized form must reproduce the above copyright

-- notice, this list of conditions and the following disclaimer in the

-- documentation and/or other materials provided with the distribution.

--

-- Neither the name of the author nor the names of other contributors may

-- be used to endorse or promote products derived from this software without

-- specific prior written permission.

--

-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE

-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

-- POSSIBILITY OF SUCH DAMAGE.

--

-- Please report bugs to the author, but before you do so, please

-- make sure that this is not a derivative work and that

-- you have the latest version of this file.

--

-- The latest version of this file can be found at:

--      http://www.opencores.org/cvsweb.shtml/gamepads/

--

-- The project homepage is located at:

--      http://www.opencores.org/projects.cgi/web/gamepads/overview

--

-------------------------------------------------------------------------------

library ieee;

use ieee.std_logic_1164.all;

entity gcpad_tx is

  generic (

    reset_level_g    :     natural := 0;

    clocks_per_1us_g :     natural := 2

  );

  port (

    -- System Interface -------------------------------------------------------

    clk_i            : in  std_logic;

    reset_i          : in  std_logic;

    -- Pad Interface ----------------------------------------------------------

    pad_data_o       : out std_logic;

    -- Control Interface ------------------------------------------------------

    tx_start_i       : in  boolean;

    tx_finished_o    : out boolean;

    tx_size_i        : in  std_logic_vector( 1 downto 0);

    tx_command_i     : in  std_logic_vector(23 downto 0)

  );

end gcpad_tx;

library ieee;

use ieee.numeric_std.all;

use work.gcpad_pack.all;

architecture rtl of gcpad_tx is

  subtype  command_t is std_logic_vector(24 downto 0);

  signal   command_q      : command_t;

  signal   load_command_s : boolean;

  signal   shift_bits_s   : boolean;

  constant cnt_long_c       : natural := clocks_per_1us_g * 4 - 1;

  constant cnt_short_c      : natural := clocks_per_1us_g * 1 - 1;

  subtype  cnt_t            is natural range 0 to cnt_long_c;

  signal   cnt_q            : cnt_t;

  signal   cnt_load_long_s  : boolean;

  signal   cnt_load_short_s : boolean;

  signal   cnt_finished_s   : boolean;

  subtype  num_bits_t      is unsigned(4 downto 0);

  signal   num_bits_q      : num_bits_t;

  signal   all_bits_sent_s : boolean;

  signal   cnt_bit_s       : boolean;

  type     state_t is (IDLE,

                       LOAD_COMMAND,

                       SEND_COMMAND_PHASE1,

                       SEND_COMMAND_PHASE2);

  signal   state_s,

           state_q  : state_t;

  signal   pad_data_s,

           pad_data_q  : std_logic;

  signal   tx_finished_s,

           tx_finished_q  : boolean;

begin

  -----------------------------------------------------------------------------

  -- Process seq

  --

  -- Purpose:

  --   Implements the sequential elements of this module.

  --

  seq: process (reset_i, clk_i)

    variable size_v : std_logic_vector(num_bits_t'range);

  begin

    if reset_i = reset_level_g then

      command_q     <= (others => '1');

      cnt_q         <= cnt_long_c;

      num_bits_q    <= (others => '0');

      pad_data_q    <= '1';

      state_q       <= IDLE;

      tx_finished_q <= false;

    elsif clk_i'event and clk_i = '1' then

      tx_finished_q <= tx_finished_s;

      -- fsm

      state_q    <= state_s;

      -- command register and bit counter

      if load_command_s then

        command_q(24 downto 1)  <= tx_command_i;

        command_q(0)            <= '1';

        -- workaround for GHDL concatenation

        size_v(num_bits_t'high downto 3) := tx_size_i;

        size_v(2 downto 0)               := (others => '0');

        num_bits_q              <= unsigned(size_v) + 1;

      else

        if shift_bits_s then

          command_q(command_t'high downto 1) <= command_q(command_t'high-1 downto 0);

        end if;

        if cnt_bit_s and not all_bits_sent_s then

          num_bits_q <= num_bits_q - 1;

        end if;

      end if;

      -- PWM counter

      if cnt_load_long_s then

        cnt_q   <= cnt_long_c;

      elsif cnt_load_short_s then

        cnt_q   <= cnt_short_c;

      else

        if not cnt_finished_s then

          cnt_q <= cnt_q - 1;

        end if;

      end if;

      -- PWM output = pad data

      pad_data_q <= pad_data_s;

    end if;

  end process seq;

  --

  -----------------------------------------------------------------------------

  -- indicates that PWM counter has finished

  cnt_finished_s  <= cnt_q = 0;

  -- indicates that all bits have been sent

  all_bits_sent_s <= num_bits_q = 0;

  -----------------------------------------------------------------------------

  -- Process fsm

  --

  -- Purpose:

  --   Models the controlling state machine.

  --

  fsm: process (state_q,

                cnt_finished_s,

                all_bits_sent_s,

                tx_start_i,

                command_q)

  begin

    -- defaul assignments

    state_s          <= IDLE;

    shift_bits_s     <= false;

    cnt_load_long_s  <= false;

    cnt_load_short_s <= false;

    pad_data_s       <= '1';

    tx_finished_s    <= false;

    load_command_s   <= false;

    cnt_bit_s        <= false;

    case state_q is

      -- IDLE -----------------------------------------------------------------

      -- The idle state.

      -- Advances when the transmitter is started

      when IDLE =>

        if tx_start_i then

          state_s <= LOAD_COMMAND;

        else

          state_s <= IDLE;

        end if;

      -- LOAD_COMMAND ---------------------------------------------------------

      -- Prepares the first and all subsequent low phases on pad_data_s.

      when LOAD_COMMAND =>

        state_s          <= SEND_COMMAND_PHASE2;

        load_command_s   <= true;

        -- start counter once to kick the loop

        cnt_load_short_s <= true;

      -- SEND_COMMAND_PHASE1 --------------------------------------------------

      -- Wait for completion of phase 1, the low phase of pad_data_s.

      -- The high phase is prepared when the PWM counter has expired.

      when SEND_COMMAND_PHASE1 =>

        state_s              <= SEND_COMMAND_PHASE1;

        pad_data_s           <= '0';

        if cnt_finished_s then

          -- initiate high phase

          pad_data_s         <= '1';

          if command_q(command_t'high) = '1' then

            cnt_load_long_s  <= true;

          else

            cnt_load_short_s <= true;

          end if;

          state_s            <= SEND_COMMAND_PHASE2;

          -- provide next bit

          shift_bits_s       <= true;

        end if;

      -- SEND_COMMAND_PHASE2 --------------------------------------------------

      -- Wait for completion of phase 2, the high phase of pad_data_s.

      -- The next low phase is prepared when the PWM counter has expired.

      -- In case all bits have been sent, the tx handshake is asserted and

      -- the FSM returns to IDLE state.

      when SEND_COMMAND_PHASE2 =>

        pad_data_s        <= '1';

        state_s           <= SEND_COMMAND_PHASE2;

        if cnt_finished_s then

          if not all_bits_sent_s then

            -- more bits to send so loop

            -- prepare low phase

            if command_q(command_t'high) = '1' then

              cnt_load_short_s <= true;

            else

              cnt_load_long_s  <= true;

            end if;

            -- decrement bit counter

            cnt_bit_s     <= true;

            state_s       <= SEND_COMMAND_PHASE1;

          else

            -- all bits sent, we're finished

            tx_finished_s <= true;

            state_s       <= IDLE;

          end if;

        end if;

      when others =>

        null;

    end case;

  end process fsm;

  --

  -----------------------------------------------------------------------------

  -----------------------------------------------------------------------------

  -- Output mapping

  -----------------------------------------------------------------------------

  tx_finished_o <= tx_finished_q;

  pad_data_o    <= pad_data_q;

end rtl;

-------------------------------------------------------------------------------

-- File History:

--

-- $Log: not supported by cvs2svn $

-- Revision 1.1  2004/10/07 21:23:10  arniml

-- initial check-in

--

-------------------------------------------------------------------------------