URL https://opencores.org/ocsvn/gecko3/gecko3/trunk

Subversion Repositories gecko3

[/] [gecko3/] [trunk/] [GECKO3COM/] [gecko3com-fw/] [gecko3-util/] [gecko3-util.c] - Blame information for rev 35

Go to most recent revision | Details | Compare with Previous | View Log


/* GECKO3COM
 *
 * Copyright (C) 2008 by
 *   ___    ____  _   _
 *  (  _`\ (  __)( ) ( )
 *  | (_) )| (_  | |_| |   Berne University of Applied Sciences
 *  |  _ <'|  _) |  _  |   School of Engineering and
 *  | (_) )| |   | | | |   Information Technology
 *  (____/'(_)   (_) (_)
 *
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
/*********************************************************************/
/** \file     gecko3-util.c
 *********************************************************************
 * \brief     simple small helper tool for GECKO3COM
 *
 *            with this tool you can set the serial number, hw revision
 *            and FPGA type of a GECKO3COM driven device.
 *            mainly this is the GECKO3main but the firmware could be
 *            used on other boards. \n
 *            Based on existing code of dfu-util and testlibusb
 *
 * \warning   does only work on little endian machines!
 *
 * \author    Christoph Zimmermann bfh.ch
 * \date      2009-1-23 first version
 * \date      2009-8-25 fixed some little bugs. option --device works now,
 *                      counts connected GECKO3 boards now correct.
 *
*/
 
#include <stdio.h>
#include <string.h>
#include <getopt.h>
#include <usb.h>
#include <errno.h>
 
#include "gecko3-util.h"
 
#define VERSION               "1.1"
 
 
/* global variables */
int debug;
static int verbose = 0;
 
/* type definitions */
struct usb_vendprod {
        u_int16_t vendor;
        u_int16_t product;
};
 
struct gecko3_if {
        u_int16_t vendor;
        u_int16_t product;
        u_int8_t configuration;
        u_int8_t interface;
        u_int8_t altsetting;
        unsigned int flags;
        struct usb_device *dev;
 
        struct usb_dev_handle *dev_handle;
};
 
static struct option opts[] = {
        { "help", 0, 0, 'h' },
        { "version", 0, 0, 'V' },
        { "verbose", 0, 0, 'v' },
        { "device", 1, 0, 'd' },
        { "transfer-size", 1, 0, 't' },
        { "set-serial", 1, 0, 's' },
        { "set-hw-rev", 1, 0, 'r' },
        { "set-fpga-type", 1, 0, 'f' },
        { "set-fpga-idcode", 1, 0, 'i' },
};
 
/*----------------------------------------------------------------------------*/
/* start of functions block */
 
/* define a portable function for reading a 16bit little-endian word */
unsigned short get_int16_le(const void *p)
{
    const unsigned char *cp = p;
 
    return ( cp[0] ) | ( ((unsigned short)cp[1]) << 8 );
}
 
static int _get_first_cb(struct gecko3_if *dif, void *v)
{
        struct gecko3_if *v_dif = v;
 
        memcpy(v_dif, dif, sizeof(*v_dif)-sizeof(struct usb_dev_handle *));
 
        /* return a value that makes find_gecko3_if return immediately */
        return 1;
}
 
 
/* Iterate over all matching devices within system */
static int iterate_gecko3_devices(struct gecko3_if *dif,
    int (*action)(struct usb_device *dev, void *user), void *user)
{
        struct usb_bus *usb_bus;
        struct usb_device *dev;
 
        /* Walk the tree and find our device. */
        for (usb_bus = usb_get_busses(); NULL != usb_bus;
             usb_bus = usb_bus->next) {
                for (dev = usb_bus->devices; NULL != dev; dev = dev->next) {
                        int retval;
 
                        if (dif && \
                            (dev->descriptor.idVendor == dif->vendor && \
                             dev->descriptor.idProduct == dif->product)) {
                          retval = action(dev, user);
                          if (retval)
                            return retval;
                        }
                }
        }
        return 0;
}
 
 
static int found_gecko3_device(struct usb_device *dev, void *user)
{
        struct gecko3_if *dif = user;
 
        dif->dev = dev;
        return 1;
}
 
 
/* Find the first device, save it in gecko3_if->dev */
static int get_first_gecko3_device(struct gecko3_if *dif)
{
        return iterate_gecko3_devices(dif, found_gecko3_device, dif);
}
 
 
static int count_one_gecko3_device(struct usb_device *dev, void *user)
{
        int *num = user;
 
        (*num)++;
        return 0;
}
 
 
/* Count matching devices within system */
static int count_gecko3_devices(struct gecko3_if *dif)
{
        int num_found = 0;
 
        iterate_gecko3_devices(dif, count_one_gecko3_device, &num_found);
        return num_found;
}
 
static int parse_vendprod(struct usb_vendprod *vp, const char *str)
{
        unsigned long vend, prod;
        const char *colon;
 
        colon = strchr(str, ':');
        if (!colon || strlen(colon) < 2)
                return -EINVAL;
 
        vend = strtoul(str, NULL, 16);
        prod = strtoul(colon+1, NULL, 16);
 
        if (vend > 0xffff || prod > 0xffff)
                return -EINVAL;
 
        vp->vendor = vend;
        vp->product = prod;
 
        return 0;
}
 
static void help(void)
{
        printf("Usage: gecko3-util [options] ...\n"
                "  -h --help\t\t\tPrint this help message\n"
                "  -V --version\t\t\tPrint the version number\n"
                "  -v --verbose\n"
                "  -d --device vendor:product\tSpecify Vendor/Product ID of GECKO3COM device\n"
                "  -t --transfer-size\t\tSpecify the number of bytes per USB Transfer\n"
                "  -s --set-serial\t\tWrite the Serial Number. Expects a String as argument\n"
                "  -r --set-hw-rev\t\tWrite the Hardware Revision. Only one digit\n"
                "  -f --set-fpga-type\t\tWrite the FPGA type. Formated as ASCII String\n"
                "  -i --set-fpga-idcode\t\tWrite the FPGA JTAG IDCODE. This is a 32bit Integer value\n"
                );
}
 
static void print_version(void)
{
        printf("gecko3-util version %s\n", VERSION);
}
 
/*----------------------------------------------------------------------------*/
 
int main(int argc, char **argv)
{
        struct usb_vendprod vendprod;
        struct gecko3_if _rt_dif, _dif, *dif = &_dif;
        char serial_num[20] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
        unsigned int hw_rev;
        char fpga_type[20] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
        char fpga_idcode[20] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
        int num_devs;
        unsigned int transfer_size = 0;
        const char *little_endian_data;
        int ret;
 
        printf("gecko3-util - (C) 2009 by Berne University of Applied Science\n"
               "This program is Free Software and has ABSOLUTELY NO WARRANTY\n\n");
 
        memset(dif, 0, sizeof(*dif));
        dif->vendor = GECKO3COM_VID;
        dif->product = GECKO3COM_PID;
        dif->flags = 0;
 
        usb_init();
        //usb_set_debug(255);
        usb_find_busses();
        usb_find_devices();
 
        while (1) {
                int c, option_index = 0;
                c = getopt_long(argc, argv, "hVvd:t:s:r:i:f:", opts,
                                &option_index);
                if (c == -1)
                        break;
 
                switch (c) {
                case 'h':
                        help();
                        exit(0);
                        break;
                case 'V':
                        print_version();
                        exit(0);
                        break;
                case 'v':
                        verbose = 1;
                        break;
                case 'd':
                        /* Parse device */
                        if (parse_vendprod(&vendprod, optarg) < 0) {
                                fprintf(stderr, "unable to parse `%s'\n", optarg);
                                exit(2);
                        }
                        dif->vendor = vendprod.vendor;
                        dif->product = vendprod.product;
                        break;
                case 't':
                        transfer_size = atoi(optarg);
                        break;
                case 's':
                        dif->flags |= FL_SET_SERIAL;
                        strcpy(serial_num, optarg);
                        break;
                case 'i':
                        dif->flags |= FL_SET_FPGA_IDCODE;
                        strcpy(fpga_idcode, optarg);
                        break;
                case 'r':
                        dif->flags |= FL_SET_HW_REV;
                        hw_rev = atoi(optarg);
                        break;
                case 'f':
                        dif->flags |= FL_SET_FPGA_TYPE;
                        strcpy(fpga_type, optarg);
                        break;
                default:
                        help();
                        exit(2);
                }
        }
 
 
        if (dif->flags == 0) {
                fprintf(stderr, "You need to specify one of -s, -r, -f or -i\n\n");
                help();
                exit(2);
        }
 
        num_devs = count_gecko3_devices(dif);
        if (num_devs == 0) {
                fprintf(stderr, "No GECKO3COM USB device found\n");
                exit(1);
        } else if (num_devs > 1) {
                /* We do not support more than one GECKO3COM device */
                fprintf(stderr, "More than one GECKO3COM USB device found. "
                       "We can handle only one device at the same time. "
                       "Please disconnect all but one device\n");
                exit(3);
        }
        if (!get_first_gecko3_device(dif))
                exit(3);
 
        /* We have exactly one device. It's usb_device is now in dif->dev */
 
        printf("Opening USB Device 0x%04x:0x%04x...\n", dif->vendor, dif->product);
        dif->dev_handle = usb_open(dif->dev);
        if (!dif->dev_handle) {
                fprintf(stderr, "Cannot open device: %s\n", usb_strerror());
                exit(1);
        }
 
        printf("Claiming USB Interface...\n");
        if (usb_claim_interface(dif->dev_handle,GECKO3COM_IF) < 0) {
                fprintf(stderr, "Cannot claim interface: %s\n",
                        usb_strerror());
                exit(1);
        }
 
        /* write Serial Number to the device */
        if (dif->flags & FL_SET_SERIAL) {
               printf("Write Serial Number...\n");
               ret = usb_control_msg(dif->dev_handle,
                                     bmRT_TYPE_VENDOR | bmRT_DIR_OUT,  /* bmRequestType */
                                     VRQ_SET_SERIAL,                   /* bRequest      */
                                     0,                                /* wValue        */
                                     0,                                /* wIndex        */
                                     serial_num,                       /* Data          */
                                     SERIAL_NO_LEN,                    /* wLength       */
                                     TIMEOUT);
               if (ret < 0) {
                       fprintf(stderr, "Cannot write Serial Number: %s\n",
                               usb_strerror());
                       exit(1);
               }
        }
 
        /* write Hardware Revision to the device */
        if (dif->flags & FL_SET_HW_REV) {
               printf("Write Hardware Revision...\n");
               ret = usb_control_msg(dif->dev_handle,
                                     bmRT_TYPE_VENDOR | bmRT_DIR_OUT,  /* bmRequestType */
                                     VRQ_SET_HW_REV,                   /* bRequest      */
                                     0,                                /* wValue        */
                                     0,                                /* wIndex        */
                                     (char*)(&hw_rev),                 /* Data          */
                                     1,                                /* wLength       */
                                     TIMEOUT);
               if (ret < 0) {
                       fprintf(stderr, "Cannot write Hardware Revision: %s\n",
                               usb_strerror());
                       exit(1);
               }
        }
 
        /* write FPGA Type to the device */
        if (dif->flags & FL_SET_FPGA_TYPE) {
               printf("Write FPGA Type...\n");
               ret = usb_control_msg(dif->dev_handle,
                                     bmRT_TYPE_VENDOR | bmRT_DIR_OUT,  /* bmRequestType */
                                     VRQ_SET_FPGA_TYPE,                /* bRequest      */
                                     0,                                /* wValue        */
                                     0,                                /* wIndex        */
                                     fpga_type,                        /* Data          */
                                     FPGA_TYPE_LEN,                    /* wLength       */
                                     TIMEOUT);
               if (ret < 0) {
                       fprintf(stderr, "Cannot write FPGA Type: %s\n",
                               usb_strerror());
                       exit(1);
               }
        }
 
        /* write FPGA IDCODE to the device */
        if (dif->flags & FL_SET_FPGA_IDCODE) {
               printf("Write FPGA IDCODE...\n");
               ret = usb_control_msg(dif->dev_handle,
                                     bmRT_TYPE_VENDOR | bmRT_DIR_OUT,  /* bmRequestType */
                                     VRQ_SET_FPGA_IDCODE,              /* bRequest      */
                                     0,                                /* wValue        */
                                     0,                                /* wIndex        */
                                     fpga_idcode,                      /* Data          */
                                     FPGA_IDCODE_LEN,                  /* wLength       */
                                     TIMEOUT);
               if (ret < 0) {
                       fprintf(stderr, "Cannot write FPGA IDCODE: %s\n",
                               usb_strerror());
                       exit(1);
               }
        }
 
        printf("We're done. Cleaning up...\n");
        if (usb_release_interface(dif->dev_handle, GECKO3COM_IF) < 0) {
                fprintf(stderr, "Cannot release interface: %s\n",
                        usb_strerror());
                exit(1);
        }
        if (usb_close(dif->dev_handle) < 0) {
                fprintf(stderr, "Cannot close USB device: %s\n",
                        usb_strerror());
                exit(1);
        }
        printf("Finished\n");
        exit(0);
}

Browse

Tools

Subversion Repositories gecko3

[/] [gecko3/] [trunk/] [GECKO3COM/] [gecko3com-fw/] [gecko3-util/] [gecko3-util.c] - Blame information for rev 35

Line No.	Rev	Author	Line
1	9	nussgipfel	`/* GECKO3COM`
2			`*`
3			`* Copyright (C) 2008 by`
4			`* ___ ____ _ _`
5			* ( _`\ ( __)( ) ( )
6			`* \| (_) )\| (_ \| \|_\| \| Berne University of Applied Sciences`
7			`* \| _ <'\| _) \| _ \| School of Engineering and`
8			`* \| (_) )\| \| \| \| \| \| Information Technology`
9			`* (____/'(_) (_) (_)`
10			`*`
11			`*`
12			`* This program is free software: you can redistribute it and/or modify`
13			`* it under the terms of the GNU General Public License as published by`
14			`* the Free Software Foundation, either version 3 of the License, or`
15			`* (at your option) any later version.`
16			`*`
17			`* This program is distributed in the hope that it will be useful,`
18			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
19			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
20			`* GNU General Public License for more details.`
21			`* You should have received a copy of the GNU General Public License`
22			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
23			`*/`
24
25			`/*********************************************************************/`
26			`/** \file gecko3-util.c`
27			`*********************************************************************`
28			`* \brief simple small helper tool for GECKO3COM`
29			`*`
30			`* with this tool you can set the serial number, hw revision`
31			`* and FPGA type of a GECKO3COM driven device.`
32			`* mainly this is the GECKO3main but the firmware could be`
33			`* used on other boards. \n`
34			`* Based on existing code of dfu-util and testlibusb`
35			`*`
36			`* \warning does only work on little endian machines!`
37			`*`
38			`* \author Christoph Zimmermann bfh.ch`
39			`* \date 2009-1-23 first version`
40			`* \date 2009-8-25 fixed some little bugs. option --device works now,`
41			`* counts connected GECKO3 boards now correct.`
42			`*`
43			`*/`
44
45			`#include <stdio.h>`
46			`#include <string.h>`
47			`#include <getopt.h>`
48			`#include <usb.h>`
49			`#include <errno.h>`
50
51			`#include "gecko3-util.h"`
52
53			`#define VERSION "1.1"`
54
55
56			`/* global variables */`
57			`int debug;`
58			`static int verbose = 0;`
59
60			`/* type definitions */`
61			`struct usb_vendprod {`
62			`u_int16_t vendor;`
63			`u_int16_t product;`
64			`};`
65
66			`struct gecko3_if {`
67			`u_int16_t vendor;`
68			`u_int16_t product;`
69			`u_int8_t configuration;`
70			`u_int8_t interface;`
71			`u_int8_t altsetting;`
72			`unsigned int flags;`
73			`struct usb_device *dev;`
74
75			`struct usb_dev_handle *dev_handle;`
76			`};`
77
78			`static struct option opts[] = {`
79			`{ "help", 0, 0, 'h' },`
80			`{ "version", 0, 0, 'V' },`
81			`{ "verbose", 0, 0, 'v' },`
82			`{ "device", 1, 0, 'd' },`
83			`{ "transfer-size", 1, 0, 't' },`
84			`{ "set-serial", 1, 0, 's' },`
85			`{ "set-hw-rev", 1, 0, 'r' },`
86			`{ "set-fpga-type", 1, 0, 'f' },`
87			`{ "set-fpga-idcode", 1, 0, 'i' },`
88			`};`
89
90			`/----------------------------------------------------------------------------/`
91			`/* start of functions block */`
92
93			`/* define a portable function for reading a 16bit little-endian word */`
94			`unsigned short get_int16_le(const void *p)`
95			`{`
96			`const unsigned char *cp = p;`
97
98			`return ( cp[0] ) \| ( ((unsigned short)cp[1]) << 8 );`
99			`}`
100
101			`static int _get_first_cb(struct gecko3_if dif, void v)`
102			`{`
103			`struct gecko3_if *v_dif = v;`
104
105			`memcpy(v_dif, dif, sizeof(v_dif)-sizeof(struct usb_dev_handle ));`
106
107			`/* return a value that makes find_gecko3_if return immediately */`
108			`return 1;`
109			`}`
110
111
112			`/* Iterate over all matching devices within system */`
113			`static int iterate_gecko3_devices(struct gecko3_if *dif,`
114			`int (action)(struct usb_device dev, void user), void user)`
115			`{`
116			`struct usb_bus *usb_bus;`
117			`struct usb_device *dev;`
118
119			`/* Walk the tree and find our device. */`
120			`for (usb_bus = usb_get_busses(); NULL != usb_bus;`
121			`usb_bus = usb_bus->next) {`
122			`for (dev = usb_bus->devices; NULL != dev; dev = dev->next) {`
123			`int retval;`
124
125			`if (dif && \`
126			`(dev->descriptor.idVendor == dif->vendor && \`
127			`dev->descriptor.idProduct == dif->product)) {`
128			`retval = action(dev, user);`
129			`if (retval)`
130			`return retval;`
131			`}`
132			`}`
133			`}`
134			`return 0;`
135			`}`
136
137
138			`static int found_gecko3_device(struct usb_device dev, void user)`
139			`{`
140			`struct gecko3_if *dif = user;`
141
142			`dif->dev = dev;`
143			`return 1;`
144			`}`
145
146
147			`/* Find the first device, save it in gecko3_if->dev */`
148			`static int get_first_gecko3_device(struct gecko3_if *dif)`
149			`{`
150			`return iterate_gecko3_devices(dif, found_gecko3_device, dif);`
151			`}`
152
153
154			`static int count_one_gecko3_device(struct usb_device dev, void user)`
155			`{`
156			`int *num = user;`
157
158			`(*num)++;`
159			`return 0;`
160			`}`
161
162
163			`/* Count matching devices within system */`
164			`static int count_gecko3_devices(struct gecko3_if *dif)`
165			`{`
166			`int num_found = 0;`
167
168			`iterate_gecko3_devices(dif, count_one_gecko3_device, &num_found);`
169			`return num_found;`
170			`}`
171
172			`static int parse_vendprod(struct usb_vendprod vp, const char str)`
173			`{`
174			`unsigned long vend, prod;`
175			`const char *colon;`
176
177			`colon = strchr(str, ':');`
178			`if (!colon \|\| strlen(colon) < 2)`
179			`return -EINVAL;`
180
181			`vend = strtoul(str, NULL, 16);`
182			`prod = strtoul(colon+1, NULL, 16);`
183
184			`if (vend > 0xffff \|\| prod > 0xffff)`
185			`return -EINVAL;`
186
187			`vp->vendor = vend;`
188			`vp->product = prod;`
189
190			`return 0;`
191			`}`
192
193			`static void help(void)`
194			`{`
195			`printf("Usage: gecko3-util [options] ...\n"`
196			`" -h --help\t\t\tPrint this help message\n"`
197			`" -V --version\t\t\tPrint the version number\n"`
198			`" -v --verbose\n"`
199			`" -d --device vendor:product\tSpecify Vendor/Product ID of GECKO3COM device\n"`
200			`" -t --transfer-size\t\tSpecify the number of bytes per USB Transfer\n"`
201			`" -s --set-serial\t\tWrite the Serial Number. Expects a String as argument\n"`
202			`" -r --set-hw-rev\t\tWrite the Hardware Revision. Only one digit\n"`
203			`" -f --set-fpga-type\t\tWrite the FPGA type. Formated as ASCII String\n"`
204			`" -i --set-fpga-idcode\t\tWrite the FPGA JTAG IDCODE. This is a 32bit Integer value\n"`
205			`);`
206			`}`
207
208			`static void print_version(void)`
209			`{`
210			`printf("gecko3-util version %s\n", VERSION);`
211			`}`
212
213			`/----------------------------------------------------------------------------/`
214
215			`int main(int argc, char **argv)`
216			`{`
217			`struct usb_vendprod vendprod;`
218			`struct gecko3_if _rt_dif, _dif, *dif = &_dif;`
219			`char serial_num[20] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};`
220			`unsigned int hw_rev;`
221			`char fpga_type[20] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};`
222			`char fpga_idcode[20] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};`
223			`int num_devs;`
224			`unsigned int transfer_size = 0;`
225			`const char *little_endian_data;`
226			`int ret;`
227
228			`printf("gecko3-util - (C) 2009 by Berne University of Applied Science\n"`
229			`"This program is Free Software and has ABSOLUTELY NO WARRANTY\n\n");`
230
231			`memset(dif, 0, sizeof(*dif));`
232			`dif->vendor = GECKO3COM_VID;`
233			`dif->product = GECKO3COM_PID;`
234			`dif->flags = 0;`
235
236			`usb_init();`
237			`//usb_set_debug(255);`
238			`usb_find_busses();`
239			`usb_find_devices();`
240
241			`while (1) {`
242			`int c, option_index = 0;`
243			`c = getopt_long(argc, argv, "hVvd:t:s:r:i:f:", opts,`
244			`&option_index);`
245			`if (c == -1)`
246			`break;`
247
248			`switch (c) {`
249			`case 'h':`
250			`help();`
251			`exit(0);`
252			`break;`
253			`case 'V':`
254			`print_version();`
255			`exit(0);`
256			`break;`
257			`case 'v':`
258			`verbose = 1;`
259			`break;`
260			`case 'd':`
261			`/* Parse device */`
262			`if (parse_vendprod(&vendprod, optarg) < 0) {`
263			fprintf(stderr, "unable to parse `%s'\n", optarg);
264			`exit(2);`
265			`}`
266			`dif->vendor = vendprod.vendor;`
267			`dif->product = vendprod.product;`
268			`break;`
269			`case 't':`
270			`transfer_size = atoi(optarg);`
271			`break;`
272			`case 's':`
273			`dif->flags \|= FL_SET_SERIAL;`
274			`strcpy(serial_num, optarg);`
275			`break;`
276			`case 'i':`
277			`dif->flags \|= FL_SET_FPGA_IDCODE;`
278			`strcpy(fpga_idcode, optarg);`
279			`break;`
280			`case 'r':`
281			`dif->flags \|= FL_SET_HW_REV;`
282			`hw_rev = atoi(optarg);`
283			`break;`
284			`case 'f':`
285			`dif->flags \|= FL_SET_FPGA_TYPE;`
286			`strcpy(fpga_type, optarg);`
287			`break;`
288			`default:`
289			`help();`
290			`exit(2);`
291			`}`
292			`}`
293
294
295			`if (dif->flags == 0) {`
296			`fprintf(stderr, "You need to specify one of -s, -r, -f or -i\n\n");`
297			`help();`
298			`exit(2);`
299			`}`
300
301			`num_devs = count_gecko3_devices(dif);`
302			`if (num_devs == 0) {`
303			`fprintf(stderr, "No GECKO3COM USB device found\n");`
304			`exit(1);`
305			`} else if (num_devs > 1) {`
306			`/* We do not support more than one GECKO3COM device */`
307			`fprintf(stderr, "More than one GECKO3COM USB device found. "`
308			`"We can handle only one device at the same time. "`
309			`"Please disconnect all but one device\n");`
310			`exit(3);`
311			`}`
312			`if (!get_first_gecko3_device(dif))`
313			`exit(3);`
314
315			`/* We have exactly one device. It's usb_device is now in dif->dev */`
316
317			`printf("Opening USB Device 0x%04x:0x%04x...\n", dif->vendor, dif->product);`
318			`dif->dev_handle = usb_open(dif->dev);`
319			`if (!dif->dev_handle) {`
320			`fprintf(stderr, "Cannot open device: %s\n", usb_strerror());`
321			`exit(1);`
322			`}`
323
324			`printf("Claiming USB Interface...\n");`
325			`if (usb_claim_interface(dif->dev_handle,GECKO3COM_IF) < 0) {`
326			`fprintf(stderr, "Cannot claim interface: %s\n",`
327			`usb_strerror());`
328			`exit(1);`
329			`}`
330
331			`/* write Serial Number to the device */`
332			`if (dif->flags & FL_SET_SERIAL) {`
333			`printf("Write Serial Number...\n");`
334			`ret = usb_control_msg(dif->dev_handle,`
335			`bmRT_TYPE_VENDOR \| bmRT_DIR_OUT, /* bmRequestType */`
336			`VRQ_SET_SERIAL, /* bRequest */`
337			`0, /* wValue */`
338			`0, /* wIndex */`
339			`serial_num, /* Data */`
340			`SERIAL_NO_LEN, /* wLength */`
341			`TIMEOUT);`
342			`if (ret < 0) {`
343			`fprintf(stderr, "Cannot write Serial Number: %s\n",`
344			`usb_strerror());`
345			`exit(1);`
346			`}`
347			`}`
348
349			`/* write Hardware Revision to the device */`
350			`if (dif->flags & FL_SET_HW_REV) {`
351			`printf("Write Hardware Revision...\n");`
352			`ret = usb_control_msg(dif->dev_handle,`
353			`bmRT_TYPE_VENDOR \| bmRT_DIR_OUT, /* bmRequestType */`
354			`VRQ_SET_HW_REV, /* bRequest */`
355			`0, /* wValue */`
356			`0, /* wIndex */`
357			`(char)(&hw_rev), / Data */`
358			`1, /* wLength */`
359			`TIMEOUT);`
360			`if (ret < 0) {`
361			`fprintf(stderr, "Cannot write Hardware Revision: %s\n",`
362			`usb_strerror());`
363			`exit(1);`
364			`}`
365			`}`
366
367			`/* write FPGA Type to the device */`
368			`if (dif->flags & FL_SET_FPGA_TYPE) {`
369			`printf("Write FPGA Type...\n");`
370			`ret = usb_control_msg(dif->dev_handle,`
371			`bmRT_TYPE_VENDOR \| bmRT_DIR_OUT, /* bmRequestType */`
372			`VRQ_SET_FPGA_TYPE, /* bRequest */`
373			`0, /* wValue */`
374			`0, /* wIndex */`
375			`fpga_type, /* Data */`
376			`FPGA_TYPE_LEN, /* wLength */`
377			`TIMEOUT);`
378			`if (ret < 0) {`
379			`fprintf(stderr, "Cannot write FPGA Type: %s\n",`
380			`usb_strerror());`
381			`exit(1);`
382			`}`
383			`}`
384
385			`/* write FPGA IDCODE to the device */`
386			`if (dif->flags & FL_SET_FPGA_IDCODE) {`
387			`printf("Write FPGA IDCODE...\n");`
388			`ret = usb_control_msg(dif->dev_handle,`
389			`bmRT_TYPE_VENDOR \| bmRT_DIR_OUT, /* bmRequestType */`
390			`VRQ_SET_FPGA_IDCODE, /* bRequest */`
391			`0, /* wValue */`
392			`0, /* wIndex */`
393			`fpga_idcode, /* Data */`
394			`FPGA_IDCODE_LEN, /* wLength */`
395			`TIMEOUT);`
396			`if (ret < 0) {`
397			`fprintf(stderr, "Cannot write FPGA IDCODE: %s\n",`
398			`usb_strerror());`
399			`exit(1);`
400			`}`
401			`}`
402
403			`printf("We're done. Cleaning up...\n");`
404			`if (usb_release_interface(dif->dev_handle, GECKO3COM_IF) < 0) {`
405			`fprintf(stderr, "Cannot release interface: %s\n",`
406			`usb_strerror());`
407			`exit(1);`
408			`}`
409			`if (usb_close(dif->dev_handle) < 0) {`
410			`fprintf(stderr, "Cannot close USB device: %s\n",`
411			`usb_strerror());`
412			`exit(1);`
413			`}`
414			`printf("Finished\n");`
415			`exit(0);`
416			`}`