Subversion Repositories gecko3

--  GECKO3COM IP Core

--

--  Copyright (C) 2009 by

--   ___    ___   _   _

--  (  _ \ (  __)( ) ( )

--  | (_) )| (   | |_| |   Bern University of Applied Sciences

--  |  _ < |  _) |  _  |   School of Engineering and

--  | (_) )| |   | | | |   Information Technology

--  (____/ (_)   (_) (_)

--

--  This program is free software: you can redistribute it and/or modify

--  it under the terms of the GNU General Public License as published by

--  the Free Software Foundation, either version 3 of the License, or

--  (at your option) any later version.

--

--  This program is distributed in the hope that it will be useful,

--  but WITHOUT ANY WARRANTY; without even the implied warranty of

--  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

--  GNU General Public License for more details. 

--  You should have received a copy of the GNU General Public License

--  along with this program.  If not, see <http://www.gnu.org/licenses/>.

--

--  URL to the project description: 

--    http://labs.ti.bfh.ch/gecko/wiki/systems/gecko3com/start

--------------------------------------------------------------------------------

--

--  Author:  Andreas Habegger, Christoph Zimmermann

--  Date of creation: 8. April 2009

--  Description:

--    GECKO3COM defines the communication between the GECKO3main and a USB

--    Master e.g. a computer.

--

--    This file is the top module, it instantiates all required submodules and

--    connects them together.

--

--  Target Devices:     Xilinx Spartan3 FPGA's

--                      (usage of BlockRam in the Datapath)

--  Tool versions:      11.1

--  Dependencies:

--

--------------------------------------------------------------------------------

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_arith.all;

library work;

use work.GECKO3COM_defines.all;

entity gpif_com is

  port (

    -- interface signals to higher level

    i_nReset  : in  std_logic;          -- asynchronous active low reset

    i_SYSCLK  : in  std_logic;          -- FPGA System CLK

    o_ABORT   : out std_logic;          -- Abort detected, you have to flush the data

    o_RX      : out std_logic;          -- controll LED rx

    o_TX      : out std_logic;          -- controll LED tx

    i_RD_EN   : in  std_logic;          -- read enable

    o_EMPTY   : out std_logic;          -- receive fifo empty

    o_RX_DATA : out std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);  -- receive data

    i_EOM     : in  std_logic;

    i_WR_EN   : in  std_logic;          -- write enable

    o_FULL    : out std_logic;          -- send fifo full

    i_TX_DATA : in  std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);  -- send data

    -- GPIF connections, to be connected to FPGA pins

    i_IFCLK    : in    std_logic;       -- GPIF CLK (GPIF is Master and provides the clock)

    i_WRU      : in    std_logic;       -- write from GPIF

    i_RDYU     : in    std_logic;       -- GPIF is ready

    o_WRX      : out   std_logic;       -- To write to GPIF

    o_RDYX     : out   std_logic;       -- IP Core is ready

    b_gpif_bus : inout std_logic_vector(SIZE_DBUS_GPIF-1 downto 0));  -- bidirect data bus

end gpif_com;

architecture structure of gpif_com is

  -- interconection signals

  signal s_FIFOrst, s_WRX, s_RDYX      : std_logic;

  signal s_ABORT_FSM, s_ABORT_TMP  : std_logic;

  signal s_RX_FSM, s_RX_TMP  : std_logic;

  signal s_TX_FSM, s_TX_TMP  : std_logic;

  signal s_EOM, s_EOM_TMP, s_EOM_FF : std_logic;  -- End of message

  signal s_X2U_FULL_IFCLK, s_X2U_FULL_TMP : std_logic;

  -- USB to Xilinx (U2X)

  signal s_U2X_WR_EN,

    s_U2X_RD_EN,

    s_U2X_FULL,

    s_U2X_AM_FULL,

    s_U2X_EMPTY,

    s_U2X_AM_EMPTY : std_logic;

  signal s_U2X_DATA     : std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);

  -- Xilinx to USB (X2U)

  signal s_X2U_WR_EN,

    s_X2U_RD_EN,

    s_X2U_FULL,

    s_X2U_AM_FULL,

    s_X2U_EMPTY,

    s_X2U_AM_EMPTY : std_logic;

  signal s_X2U_DATA     : std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);

  -----------------------------------------------------------------------------

  -- data bus

  -----------------------------------------------------------------------------

  -- data signals

  signal s_dbus_trans_dir     : std_logic;

  signal s_dbus_in  : std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);

  signal s_dbus_out : std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);

  -----------------------------------------------------------------------------

  -- COMPONENTS

  -----------------------------------------------------------------------------

  -- FSM GPIF

  component gpif_com_fsm

    port (

      i_nReset         : in  std_logic;

      i_IFCLK          : in  std_logic;

      i_WRU            : in  std_logic;

      i_RDYU           : in  std_logic;

      i_EOM            : in  std_logic;

      i_U2X_FULL       : in  std_logic;

      i_U2X_AM_FULL    : in  std_logic;

      i_X2U_FULL_IFCLK : in  std_logic;

      i_X2U_AM_EMPTY   : in  std_logic;

      i_X2U_EMPTY      : in  std_logic;

      o_bus_trans_dir  : out std_logic;

      o_U2X_WR_EN      : out std_logic;

      o_X2U_RD_EN      : out std_logic;

      o_FIFOrst        : out std_logic;

      o_WRX            : out std_logic;

      o_RDYX           : out std_logic;

      o_ABORT          : out std_logic;

      o_RX             : out std_logic;

      o_TX             : out std_logic);

  end component;

  -- FIFO dualclock to cross the clock domain between the GPIF and the FPGA

  component fifo_dualclock

    port (

      i_din          : IN  std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);

      i_rd_clk       : IN  std_logic;

      i_rd_en        : IN  std_logic;

      i_rst          : IN  std_logic;

      i_wr_clk       : IN  std_logic;

      i_wr_en        : IN  std_logic;

      o_almost_empty : OUT std_logic;

      o_almost_full  : OUT std_logic;

      o_dout         : OUT std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);

      o_empty        : OUT std_logic;

      o_full         : OUT std_logic);

  end component;

begin

  -----------------------------------------------------------------------------

  -- Port map

  -----------------------------------------------------------------------------

  F_IN : fifo_dualclock

    port map (

      i_din          => s_dbus_in,

      i_rd_clk       => i_SYSCLK,

      i_rd_en        => s_U2X_RD_EN,

      i_rst          => s_FIFOrst,

      i_wr_clk       => i_IFCLK ,

      i_wr_en        => s_U2X_WR_EN,

      o_almost_empty => s_U2X_AM_EMPTY,

      o_almost_full  => s_U2X_AM_FULL,

      o_dout         => s_U2X_DATA,

      o_empty        => s_U2X_EMPTY,

      o_full         => s_U2X_FULL

      );

  F_OUT : fifo_dualclock

    port map (

      i_din          => s_X2U_DATA,

      i_rd_clk       => i_IFCLK,

      i_rd_en        => s_X2U_RD_EN,

      i_rst          => s_FIFOrst,

      i_wr_clk       => i_SYSCLK,

      i_wr_en        => s_X2U_WR_EN,

      o_almost_empty => s_X2U_AM_EMPTY,

      o_almost_full  => s_X2U_AM_FULL,

      o_dout         => s_dbus_out,

      o_empty        => s_X2U_EMPTY,

      o_full         => s_X2U_FULL

      );

  FSM_GPIF : gpif_com_fsm

    port map (

      i_nReset         => i_nReset,

      i_IFCLK          => i_IFCLK,

      i_WRU            => i_WRU,

      i_RDYU           => i_RDYU,

      i_EOM            => s_EOM_FF,

      i_U2X_FULL       => s_U2X_FULL,

      i_U2X_AM_FULL    => s_U2X_AM_FULL,

      i_X2U_FULL_IFCLK => s_X2U_FULL_IFCLK,

      i_X2U_AM_EMPTY   => s_X2U_AM_EMPTY,

      i_X2U_EMPTY      => s_X2U_EMPTY,

      o_U2X_WR_EN      => s_U2X_WR_EN,

      o_X2U_RD_EN      => s_X2U_RD_EN,

      o_FIFOrst        => s_FIFOrst,

      o_bus_trans_dir  => s_dbus_trans_dir,

      o_WRX            => s_WRX,

      o_RDYX           => s_RDYX,

      o_ABORT          => s_ABORT_FSM,

      o_RX             => s_RX_FSM,

      o_TX             => s_TX_FSM

      );

  s_U2X_RD_EN  <= i_RD_EN;

  o_EMPTY   <= s_U2X_EMPTY;

  o_RX_DATA <= s_U2X_DATA;

  s_X2U_WR_EN <= i_WR_EN;

  o_FULL    <= s_X2U_FULL;

  s_X2U_DATA <= i_TX_DATA;

  o_WRX <= s_WRX;

  o_RDYX <= s_RDYX;

  -- Double buffer the ABORT, RX and TX signal to avoid metastability

  double_buf_sig : process (i_SYSCLK, i_nReset)

  begin

    if i_nReset = '0' then

      o_ABORT     <= '0';

      s_ABORT_TMP <= '0';

      o_TX        <= '0';

      s_TX_TMP    <= '0';

      o_RX        <= '0';

      s_RX_TMP    <= '0';

    elsif rising_edge(i_SYSCLK) then

      o_ABORT     <= s_ABORT_TMP;

      s_ABORT_TMP <= s_ABORT_FSM;

      o_TX        <= s_TX_TMP;

      s_TX_TMP    <= s_TX_FSM;

      o_RX        <= s_RX_TMP;

      s_RX_TMP    <= s_RX_FSM;

    end if;

  end process double_buf_sig;

  -- Double buffer the s_EOM and s_X2U_FULL_IFCLK signal to avoid metastability

  double_buf_ifclk : process (i_IFCLK, i_nReset)

  begin

    if i_nReset = '0' then

      s_X2U_FULL_TMP <= '0';

      s_X2U_FULL_IFCLK <= '0';

    elsif rising_edge(i_IFCLK) then

      s_EOM     <= s_EOM_TMP;

      s_EOM_TMP <= i_EOM;

      s_X2U_FULL_IFCLK <= s_X2U_FULL_TMP;

      s_X2U_FULL_TMP <= s_X2U_FULL;

    end if;

  end process double_buf_ifclk;

  -- purpose: EOM bit flip-flop

  -- type   : sequential

  -- inputs : i_IFCLK, i_nReset, s_EOM, s_X2U_EMPTY

  -- outputs: s_EOM_FF

  EOM_FF: process (i_IFCLK, i_nReset)

  begin  -- process EOM_FF

    if i_nReset = '0' then                -- asynchronous reset (active low)

      s_EOM_FF <= '0';

    elsif i_IFCLK'event and i_IFCLK = '1' then  -- rising clock edge

      if s_EOM = '1' then

        s_EOM_FF <= '1';

      end if;

      if s_X2U_EMPTY = '1' then

        s_EOM_FF <= '0';

      end if;

    end if;

  end process EOM_FF;

  -----------------------------------------------------------------------------

  -- Data bus access

  -----------------------------------------------------------------------------

  -- purpose: to handle the access on the bidirectional bus

  -- type   : combinational

  -- inputs : s_bus_trans_dir

  -- outputs: 

  bus_access : process (s_dbus_trans_dir, s_dbus_out)

  begin  -- process bus_access

    if s_dbus_trans_dir = '1' then

      b_gpif_bus <= s_dbus_out;

    else

      b_gpif_bus <= (others => 'Z');

    end if;

  end process bus_access;

  -- buffer the gpif bus input signals to avoid that the last word in the

  -- usb to xilinx transfer is read twice.

  buf_input : process (i_IFCLK)

  begin

    if rising_edge(i_IFCLK) then

      s_dbus_in <= b_gpif_bus;

    end if;

  end process buf_input;

end structure;