Subversion Repositories gpib_controller

--------------------------------------------------------------------------------

--This file is part of fpga_gpib_controller.

--

-- Fpga_gpib_controller is free software: you can redistribute it and/or modify

-- it under the terms of the GNU General Public License as published by

-- the Free Software Foundation, either version 3 of the License, or

-- (at your option) any later version.

--

-- Fpga_gpib_controller is distributed in the hope that it will be useful,

-- but WITHOUT ANY WARRANTY; without even the implied warranty of

-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-- GNU General Public License for more details.

-- You should have received a copy of the GNU General Public License

-- along with Fpga_gpib_controller.  If not, see <http://www.gnu.org/licenses/>.

--------------------------------------------------------------------------------

-- Author: Andrzej Paluch

--

-- Create Date:   23:50:53 11/16/2011

-- Design Name:   MemoryBlock

-- Module Name:   J:/projekty/elektronika/USB_to_HPIB/usbToHpib/src/test/MemoryBlock_Test.vhd

-- Project Name:  usbToGpib

-- Target Device:  

-- Tool versions:  

-- Description:   

-- 

-- VHDL Test Bench Created by ISE for module: MemoryBlock

--

-- Dependencies:

-- 

-- Revision:

-- Revision 0.01 - File Created

-- Additional Comments:

--

-- Notes: 

-- This testbench has been automatically generated using types std_logic and

-- std_logic_vector for the ports of the unit under test.  Xilinx recommends 

-- that these types always be used for the top-level I/O of a design in order 

-- to guarantee that the testbench will bind correctly to the post-implementation 

-- simulation model.

--------------------------------------------------------------------------------

LIBRARY ieee;

USE ieee.std_logic_1164.ALL;

USE ieee.std_logic_unsigned.all;

USE ieee.numeric_std.ALL;

use work.helperComponents.all;

ENTITY MemoryBlock_Test_vhd IS

END MemoryBlock_Test_vhd;

ARCHITECTURE behavior OF MemoryBlock_Test_vhd IS

        constant clk_period : time := 1us;

        SIGNAL reset :  std_logic := '0';

        SIGNAL clk :  std_logic := '0';

        -------------------------------------------------

        SIGNAL p1_addr : std_logic_vector(10 downto 0) := (others => '0');

        SIGNAL p1_data_in : std_logic_vector(7 downto 0) := (others => '0');

        SIGNAL p1_data_out : std_logic_vector(7 downto 0);

        SIGNAL p1_strobe : std_logic := '0';

        -------------------------------------------------

        SIGNAL p2_addr : std_logic_vector(10 downto 0) := (others => '0');

        SIGNAL p2_data_in : std_logic_vector(7 downto 0) := (others => '0');

        SIGNAL p2_data_out : std_logic_vector(7 downto 0);

        SIGNAL p2_strobe : std_logic := '0';

BEGIN

        -- Instantiate the Unit Under Test (UUT)

        uut: MemoryBlock port map (

                reset => reset,

                clk => clk,

                -------------------------------------------------

                p1_addr => p1_addr,

                p1_data_in => p1_data_in,

                p1_strobe => p1_strobe,

                p1_data_out => p1_data_out,

                -------------------------------------------------

                p2_addr => p2_addr,

                p2_data_in => p2_data_in,

                p2_strobe => p2_strobe,

                p2_data_out => p2_data_out

        );

        -- Clock process definitions

        clk_process :process

        begin

                clk <= '0';

                wait for clk_period/2;

                clk <= '1';

                wait for clk_period/2;

        end process;

        stim_proc: PROCESS

        BEGIN

                reset <= '1';

                wait for clk_period*4;

                reset <= '0';

                wait for clk_period*20;

                p1_addr <= "00000000000";

                p2_addr <= "00000000000";

                p1_data_in <= "10101010";

                wait for clk_period/2;

                p1_strobe <= '1';

                wait for clk_period;

                p1_strobe <= '0';

                wait for clk_period*4;

                p2_addr <= "00000000101";

                p2_data_in <= "11010101";

                wait for clk_period;

                p2_strobe <= '1';

                wait for clk_period;

                p2_strobe <= '0';

                wait for clk_period*4;

                p1_addr <= "00000000101";

                wait; -- will wait forever

        END PROCESS;

END;