Subversion Repositories ha1588

/*

 * wb_slv_wrapper.v

 *

 * Copyright (c) 2012, BABY&HW. All rights reserved.

 *

 * This library is free software; you can redistribute it and/or

 * modify it under the terms of the GNU Lesser General Public

 * License as published by the Free Software Foundation; either

 * version 2.1 of the License, or (at your option) any later version.

 *

 * This library is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

 * Lesser General Public License for more details.

 *

 * You should have received a copy of the GNU Lesser General Public

 * License along with this library; if not, write to the Free Software

 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,

 * MA 02110-1301  USA

 */

`timescale 1ns/1ns

module wb_slv_wrapper (

  // wishbone side

  input         rst_i,clk_i,

  input         stb_i,we_i,

  output        ack_o,

  input  [31:0] adr_i,  // in byte

  input  [31:0] dat_i,

  output [31:0] dat_o,

  // localbus side

  output        rst,clk,

  output        wr_out,rd_out,

  output [ 7:0] addr_out,  // in byte

  output [31:0] data_out,

  input  [31:0] data_in

);

reg  stb_i_d1;

wire stb_internal = stb_i && !stb_i_d1;

reg  ack_internal;

// localbus output

always @(posedge rst_i or posedge clk_i) begin

  if (rst_i)

    stb_i_d1 <= 1'b0;

  else if (ack_internal)

    stb_i_d1 <= 1'b0;

  else

    stb_i_d1 <= stb_i;

end

assign {rst, clk}     = {rst_i, clk_i};

assign wr_out         = stb_internal &&  we_i;

assign rd_out         = stb_internal && !we_i;

assign addr_out[ 7:0] = adr_i[ 7:0];

assign data_out[31:0] = dat_i[31:0];

// wishbone output

always @(posedge rst_i or posedge clk_i) begin

  if (rst_i)

    ack_internal <= 1'b0;

  else if (ack_internal)

    ack_internal <= 1'b0;

  else if (stb_i)

    ack_internal <= 1'b1;

  else

    ack_internal <= ack_internal;

end

assign ack_o       = ack_internal;

assign dat_o[31:0] = data_in[31:0];

endmodule