URL https://opencores.org/ocsvn/hf-risc/hf-risc/trunk

Subversion Repositories hf-risc

[/] [hf-risc/] [trunk/] [software/] [makefile] - Blame information for rev 16

Go to most recent revision | Details | Compare with Previous | View Log


# architecture: mips or riscv
ARCH=mips
 
# board specific parameters
BAUDRATE=57600
F_CLK=25000000
SERIAL_DEV=/dev/ttyUSB0
 
# compiler flags
CFLAGS_STRIP = -fdata-sections -ffunction-sections
LDFLAGS_STRIP = --gc-sections
 
CFLAGS_NO_HW_MULDIV = -mnohwmult -mnohwdiv -ffixed-lo -ffixed-hi
GCC_mips = mips-elf-gcc -O2 -c -mips1 -mpatfree -mfix-r4000 -mno-check-zero-division -msoft-float -fshort-double -ffreestanding -nostdlib -fomit-frame-pointer -G 0 -I ./include -DCPU_SPEED=${F_CLK} -DBIG_ENDIAN $(CFLAGS_STRIP) $(CFLAGS_NO_HW_MULDIV) # -DDEBUG_PORT
 
AS_mips = mips-elf-as -mips1 -msoft-float
LD_mips = mips-elf-ld -mips1 $(LDFLAGS_STRIP)
DUMP_mips = mips-elf-objdump
READ_mips = mips-elf-readelf
OBJ_mips = mips-elf-objcopy
SIZE_mips = mips-elf-size
 
GCC_riscv = riscv64-unknown-elf-gcc -march=RV32I -O2 -c -msoft-float -fshort-double -ffreestanding -nostdlib -ffixed-s10 -ffixed-s11 -I ./include -DCPU_SPEED=${F_CLK} -DLITTLE_ENDIAN $(CFLAGS_STRIP) #-ffixed-s10 -ffixed-s11 -mrvc -fPIC -DDEBUG_PORT
AS_riscv = riscv64-unknown-elf-as -m32 -msoft-float #-fPIC
LD_riscv = riscv64-unknown-elf-ld -melf32lriscv $(LDFLAGS_STRIP)
DUMP_riscv = riscv64-unknown-elf-objdump -Mno-aliases
READ_riscv = riscv64-unknown-elf-readelf
OBJ_riscv = riscv64-unknown-elf-objcopy
SIZE_riscv = riscv64-unknown-elf-size
 
all:
 
serial:
        stty ${BAUDRATE} raw cs8 -parenb -crtscts clocal cread ignpar ignbrk -ixon -ixoff -ixany -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke -F ${SERIAL_DEV}
 
load: serial
        cp code.bin ${SERIAL_DEV}
 
debug: serial
        cat ${SERIAL_DEV}
 
monitor:
        $(AS_$(ARCH)) -o boot_rom.o lib/$(ARCH)/boot_rom.s
        $(GCC_$(ARCH)) -o libc.o lib/libc.c
        $(GCC_$(ARCH)) -o monitor.o boot/monitor.c
        $(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc_bootloader.ld -Map test.map -N -o test.axf \
                boot_rom.o libc.o monitor.o
        $(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst
        $(DUMP_$(ARCH)) -h test.axf > test.sec
        $(DUMP_$(ARCH)) -s test.axf > test.cnt
        $(OBJ_$(ARCH)) -O binary test.axf test.bin --pad-to 4096
        $(SIZE_$(ARCH)) test.axf
        mv test.axf code.axf
        mv test.bin code.bin
        mv test.lst code.lst
        mv test.sec code.sec
        mv test.cnt code.cnt
        mv test.map code.map
        hexdump -v -e '4/1 "%02x" "\n"' code.bin > boot.txt
        xxd -b -c 4 code.bin | awk '{print $$2 $$3 $$4 $$5}' > boot_bin.txt
        ./../tools/xilinx/ram_image ./../tools/xilinx/ram_xilinx.vhd boot.txt boot_ram.vhd
 
boot_sim:
        $(AS_$(ARCH)) -o boot_rom.o lib/$(ARCH)/boot_rom.s
        $(GCC_$(ARCH)) -o libc.o lib/libc.c
        $(GCC_$(ARCH)) -o bootloader_sim.o boot/bootloader_sim.c
        $(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc_bootloader.ld -Map test.map -N -o test.axf \
                boot_rom.o libc.o bootloader_sim.o
        $(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst
        $(DUMP_$(ARCH)) -h test.axf > test.sec
        $(DUMP_$(ARCH)) -s test.axf > test.cnt
        $(OBJ_$(ARCH)) -O binary test.axf test.bin
        $(SIZE_$(ARCH)) test.axf
        mv test.axf code.axf
        mv test.bin code.bin
        mv test.lst code.lst
        mv test.sec code.sec
        mv test.cnt code.cnt
        mv test.map code.map
        hexdump -v -e '4/1 "%02x" "\n"' code.bin > boot.txt
 
eeprom_sim:
        echo "b16b00b5" > eeprom.txt
        printf "%08x\n" `stat -L -c %s code.txt` >> eeprom.txt
        cat code.txt >> eeprom.txt
 
hello:
        $(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s
        $(GCC_$(ARCH)) -o libc.o lib/libc.c
        $(GCC_$(ARCH)) -o hello.o app/hello.c
        $(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \
                crt0.o libc.o hello.o
        $(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst
        $(DUMP_$(ARCH)) -h test.axf > test.sec
        $(DUMP_$(ARCH)) -s test.axf > test.cnt
        $(OBJ_$(ARCH)) -O binary test.axf test.bin
        $(SIZE_$(ARCH)) test.axf
        mv test.axf code.axf
        mv test.bin code.bin
        mv test.lst code.lst
        mv test.sec code.sec
        mv test.cnt code.cnt
        mv test.map code.map
        hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt
 
fib:
        $(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s
        $(GCC_$(ARCH)) -o libc.o lib/libc.c
        $(GCC_$(ARCH)) -o fib.o app/fib.c
        $(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \
                crt0.o libc.o fib.o
        $(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst
        $(DUMP_$(ARCH)) -h test.axf > test.sec
        $(DUMP_$(ARCH)) -s test.axf > test.cnt
        $(OBJ_$(ARCH)) -O binary test.axf test.bin
        $(SIZE_$(ARCH)) test.axf
        mv test.axf code.axf
        mv test.bin code.bin
        mv test.lst code.lst
        mv test.sec code.sec
        mv test.cnt code.cnt
        mv test.map code.map
        hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt
 
interrupt_test:
        $(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s
        $(GCC_$(ARCH)) -o libc.o lib/libc.c
        $(GCC_$(ARCH)) -o interrupt_test.o app/interrupt_test.c
        $(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \
                crt0.o libc.o interrupt_test.o
        $(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst
        $(DUMP_$(ARCH)) -h test.axf > test.sec
        $(DUMP_$(ARCH)) -s test.axf > test.cnt
        $(OBJ_$(ARCH)) -O binary test.axf test.bin
        $(SIZE_$(ARCH)) test.axf
        mv test.axf code.axf
        mv test.bin code.bin
        mv test.lst code.lst
        mv test.sec code.sec
        mv test.cnt code.cnt
        mv test.map code.map
        hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt
 
sort:
        $(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s
        $(GCC_$(ARCH)) -o libc.o lib/libc.c
        $(GCC_$(ARCH)) -o sort.o app/sort.c
        $(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \
                crt0.o libc.o sort.o
        $(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst
        $(DUMP_$(ARCH)) -h test.axf > test.sec
        $(DUMP_$(ARCH)) -s test.axf > test.cnt
        $(OBJ_$(ARCH)) -O binary test.axf test.bin
        $(SIZE_$(ARCH)) test.axf
        mv test.axf code.axf
        mv test.bin code.bin
        mv test.lst code.lst
        mv test.sec code.sec
        mv test.cnt code.cnt
        mv test.map code.map
        hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt
 
test64:
        $(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s
        $(GCC_$(ARCH)) -o libc.o lib/libc.c
        $(GCC_$(ARCH)) -o test64.o app/test64.c
        $(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \
                crt0.o libc.o test64.o
        $(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst
        $(DUMP_$(ARCH)) -h test.axf > test.sec
        $(DUMP_$(ARCH)) -s test.axf > test.cnt
        $(OBJ_$(ARCH)) -O binary test.axf test.bin
        $(SIZE_$(ARCH)) test.axf
        mv test.axf code.axf
        mv test.bin code.bin
        mv test.lst code.lst
        mv test.sec code.sec
        mv test.cnt code.cnt
        mv test.map code.map
        hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt
 
test_crc:
        $(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s
        $(GCC_$(ARCH)) -o libc.o lib/libc.c
        $(GCC_$(ARCH)) -o test_crc.o app/test_crc.c
        $(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \
                crt0.o libc.o test_crc.o
        $(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst
        $(DUMP_$(ARCH)) -h test.axf > test.sec
        $(DUMP_$(ARCH)) -s test.axf > test.cnt
        $(OBJ_$(ARCH)) -O binary test.axf test.bin
        $(SIZE_$(ARCH)) test.axf
        mv test.axf code.axf
        mv test.bin code.bin
        mv test.lst code.lst
        mv test.sec code.sec
        mv test.cnt code.cnt
        mv test.map code.map
        hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt
 
xtea:
        $(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s
        $(GCC_$(ARCH)) -o libc.o lib/libc.c
        $(GCC_$(ARCH)) -o xtea.o app/xtea.c
        $(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \
                crt0.o libc.o xtea.o
        $(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst
        $(DUMP_$(ARCH)) -h test.axf > test.sec
        $(DUMP_$(ARCH)) -s test.axf > test.cnt
        $(OBJ_$(ARCH)) -O binary test.axf test.bin
        $(SIZE_$(ARCH)) test.axf
        mv test.axf code.axf
        mv test.bin code.bin
        mv test.lst code.lst
        mv test.sec code.sec
        mv test.cnt code.cnt
        mv test.map code.map
        hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt
 
xtea_hw:
        $(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s
        $(GCC_$(ARCH)) -o libc.o lib/libc.c
        $(GCC_$(ARCH)) -o xtea_hw.o app/xtea_hw.c
        $(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \
                crt0.o libc.o xtea_hw.o
        $(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst
        $(DUMP_$(ARCH)) -h test.axf > test.sec
        $(DUMP_$(ARCH)) -s test.axf > test.cnt
        $(OBJ_$(ARCH)) -O binary test.axf test.bin
        $(SIZE_$(ARCH)) test.axf
        mv test.axf code.axf
        mv test.bin code.bin
        mv test.lst code.lst
        mv test.sec code.sec
        mv test.cnt code.cnt
        mv test.map code.map
        hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt
 
test_spi:
        $(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s
        $(GCC_$(ARCH)) -o libc.o lib/libc.c
        $(GCC_$(ARCH)) -o spi.o lib/spi.c
        $(GCC_$(ARCH)) -o test_spi.o app/test_spi.c
        $(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \
                crt0.o libc.o spi.o test_spi.o
        $(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst
        $(DUMP_$(ARCH)) -h test.axf > test.sec
        $(DUMP_$(ARCH)) -s test.axf > test.cnt
        $(OBJ_$(ARCH)) -O binary test.axf test.bin
        $(SIZE_$(ARCH)) test.axf
        mv test.axf code.axf
        mv test.bin code.bin
        mv test.lst code.lst
        mv test.sec code.sec
        mv test.cnt code.cnt
        mv test.map code.map
        hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt
 
exp_io:
        $(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s
        $(GCC_$(ARCH)) -o libc.o lib/libc.c
        $(GCC_$(ARCH)) -o spi.o lib/spi.c
        $(GCC_$(ARCH)) -o mcp23s17.o lib/mcp23s17.c
        $(GCC_$(ARCH)) -o exp_io.o app/exp_io.c
        $(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \
                crt0.o libc.o spi.o mcp23s17.o exp_io.o
        $(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst
        $(DUMP_$(ARCH)) -h test.axf > test.sec
        $(DUMP_$(ARCH)) -s test.axf > test.cnt
        $(OBJ_$(ARCH)) -O binary test.axf test.bin
        $(SIZE_$(ARCH)) test.axf
        mv test.axf code.axf
        mv test.bin code.bin
        mv test.lst code.lst
        mv test.sec code.sec
        mv test.cnt code.cnt
        mv test.map code.map
        hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt
 
clean:
        -rm -rf *~ *.o *.axf *.map *.lst *.sec *.cnt *.txt *.bin *.vhd
        -rm -rf app/*~
        -rm -rf boot/*~
        -rm -rf include/*~
        -rm -rf lib/*~

Browse

Tools

Subversion Repositories hf-risc

[/] [hf-risc/] [trunk/] [software/] [makefile] - Blame information for rev 16

Line No.	Rev	Author	Line
1	13	serginhofr	`# architecture: mips or riscv`
2			`ARCH=mips`
3
4			`# board specific parameters`
5			`BAUDRATE=57600`
6			`F_CLK=25000000`
7			`SERIAL_DEV=/dev/ttyUSB0`
8
9			`# compiler flags`
10			`CFLAGS_STRIP = -fdata-sections -ffunction-sections`
11			`LDFLAGS_STRIP = --gc-sections`
12
13			`CFLAGS_NO_HW_MULDIV = -mnohwmult -mnohwdiv -ffixed-lo -ffixed-hi`
14			`GCC_mips = mips-elf-gcc -O2 -c -mips1 -mpatfree -mfix-r4000 -mno-check-zero-division -msoft-float -fshort-double -ffreestanding -nostdlib -fomit-frame-pointer -G 0 -I ./include -DCPU_SPEED=${F_CLK} -DBIG_ENDIAN $(CFLAGS_STRIP) $(CFLAGS_NO_HW_MULDIV) # -DDEBUG_PORT`
15
16			`AS_mips = mips-elf-as -mips1 -msoft-float`
17			`LD_mips = mips-elf-ld -mips1 $(LDFLAGS_STRIP)`
18			`DUMP_mips = mips-elf-objdump`
19			`READ_mips = mips-elf-readelf`
20			`OBJ_mips = mips-elf-objcopy`
21			`SIZE_mips = mips-elf-size`
22
23			`GCC_riscv = riscv64-unknown-elf-gcc -march=RV32I -O2 -c -msoft-float -fshort-double -ffreestanding -nostdlib -ffixed-s10 -ffixed-s11 -I ./include -DCPU_SPEED=${F_CLK} -DLITTLE_ENDIAN $(CFLAGS_STRIP) #-ffixed-s10 -ffixed-s11 -mrvc -fPIC -DDEBUG_PORT`
24			`AS_riscv = riscv64-unknown-elf-as -m32 -msoft-float #-fPIC`
25			`LD_riscv = riscv64-unknown-elf-ld -melf32lriscv $(LDFLAGS_STRIP)`
26			`DUMP_riscv = riscv64-unknown-elf-objdump -Mno-aliases`
27			`READ_riscv = riscv64-unknown-elf-readelf`
28			`OBJ_riscv = riscv64-unknown-elf-objcopy`
29			`SIZE_riscv = riscv64-unknown-elf-size`
30
31			`all:`
32
33			`serial:`
34			`stty ${BAUDRATE} raw cs8 -parenb -crtscts clocal cread ignpar ignbrk -ixon -ixoff -ixany -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke -F ${SERIAL_DEV}`
35
36			`load: serial`
37			`cp code.bin ${SERIAL_DEV}`
38
39			`debug: serial`
40			`cat ${SERIAL_DEV}`
41
42			`monitor:`
43			`$(AS_$(ARCH)) -o boot_rom.o lib/$(ARCH)/boot_rom.s`
44			`$(GCC_$(ARCH)) -o libc.o lib/libc.c`
45			`$(GCC_$(ARCH)) -o monitor.o boot/monitor.c`
46			`$(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc_bootloader.ld -Map test.map -N -o test.axf \`
47			`boot_rom.o libc.o monitor.o`
48			`$(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst`
49			`$(DUMP_$(ARCH)) -h test.axf > test.sec`
50			`$(DUMP_$(ARCH)) -s test.axf > test.cnt`
51			`$(OBJ_$(ARCH)) -O binary test.axf test.bin --pad-to 4096`
52			`$(SIZE_$(ARCH)) test.axf`
53			`mv test.axf code.axf`
54			`mv test.bin code.bin`
55			`mv test.lst code.lst`
56			`mv test.sec code.sec`
57			`mv test.cnt code.cnt`
58			`mv test.map code.map`
59			`hexdump -v -e '4/1 "%02x" "\n"' code.bin > boot.txt`
60			`xxd -b -c 4 code.bin \| awk '{print $$2 $$3 $$4 $$5}' > boot_bin.txt`
61			`./../tools/xilinx/ram_image ./../tools/xilinx/ram_xilinx.vhd boot.txt boot_ram.vhd`
62
63			`boot_sim:`
64			`$(AS_$(ARCH)) -o boot_rom.o lib/$(ARCH)/boot_rom.s`
65			`$(GCC_$(ARCH)) -o libc.o lib/libc.c`
66			`$(GCC_$(ARCH)) -o bootloader_sim.o boot/bootloader_sim.c`
67			`$(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc_bootloader.ld -Map test.map -N -o test.axf \`
68			`boot_rom.o libc.o bootloader_sim.o`
69			`$(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst`
70			`$(DUMP_$(ARCH)) -h test.axf > test.sec`
71			`$(DUMP_$(ARCH)) -s test.axf > test.cnt`
72			`$(OBJ_$(ARCH)) -O binary test.axf test.bin`
73			`$(SIZE_$(ARCH)) test.axf`
74			`mv test.axf code.axf`
75			`mv test.bin code.bin`
76			`mv test.lst code.lst`
77			`mv test.sec code.sec`
78			`mv test.cnt code.cnt`
79			`mv test.map code.map`
80			`hexdump -v -e '4/1 "%02x" "\n"' code.bin > boot.txt`
81
82			`eeprom_sim:`
83			`echo "b16b00b5" > eeprom.txt`
84			printf "%08x\n" `stat -L -c %s code.txt` >> eeprom.txt
85			`cat code.txt >> eeprom.txt`
86
87			`hello:`
88			`$(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s`
89			`$(GCC_$(ARCH)) -o libc.o lib/libc.c`
90			`$(GCC_$(ARCH)) -o hello.o app/hello.c`
91			`$(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \`
92			`crt0.o libc.o hello.o`
93			`$(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst`
94			`$(DUMP_$(ARCH)) -h test.axf > test.sec`
95			`$(DUMP_$(ARCH)) -s test.axf > test.cnt`
96			`$(OBJ_$(ARCH)) -O binary test.axf test.bin`
97			`$(SIZE_$(ARCH)) test.axf`
98			`mv test.axf code.axf`
99			`mv test.bin code.bin`
100			`mv test.lst code.lst`
101			`mv test.sec code.sec`
102			`mv test.cnt code.cnt`
103			`mv test.map code.map`
104			`hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt`
105
106			`fib:`
107			`$(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s`
108			`$(GCC_$(ARCH)) -o libc.o lib/libc.c`
109			`$(GCC_$(ARCH)) -o fib.o app/fib.c`
110			`$(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \`
111			`crt0.o libc.o fib.o`
112			`$(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst`
113			`$(DUMP_$(ARCH)) -h test.axf > test.sec`
114			`$(DUMP_$(ARCH)) -s test.axf > test.cnt`
115			`$(OBJ_$(ARCH)) -O binary test.axf test.bin`
116			`$(SIZE_$(ARCH)) test.axf`
117			`mv test.axf code.axf`
118			`mv test.bin code.bin`
119			`mv test.lst code.lst`
120			`mv test.sec code.sec`
121			`mv test.cnt code.cnt`
122			`mv test.map code.map`
123			`hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt`
124
125			`interrupt_test:`
126			`$(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s`
127			`$(GCC_$(ARCH)) -o libc.o lib/libc.c`
128			`$(GCC_$(ARCH)) -o interrupt_test.o app/interrupt_test.c`
129			`$(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \`
130			`crt0.o libc.o interrupt_test.o`
131			`$(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst`
132			`$(DUMP_$(ARCH)) -h test.axf > test.sec`
133			`$(DUMP_$(ARCH)) -s test.axf > test.cnt`
134			`$(OBJ_$(ARCH)) -O binary test.axf test.bin`
135			`$(SIZE_$(ARCH)) test.axf`
136			`mv test.axf code.axf`
137			`mv test.bin code.bin`
138			`mv test.lst code.lst`
139			`mv test.sec code.sec`
140			`mv test.cnt code.cnt`
141			`mv test.map code.map`
142			`hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt`
143
144			`sort:`
145			`$(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s`
146			`$(GCC_$(ARCH)) -o libc.o lib/libc.c`
147			`$(GCC_$(ARCH)) -o sort.o app/sort.c`
148			`$(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \`
149			`crt0.o libc.o sort.o`
150			`$(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst`
151			`$(DUMP_$(ARCH)) -h test.axf > test.sec`
152			`$(DUMP_$(ARCH)) -s test.axf > test.cnt`
153			`$(OBJ_$(ARCH)) -O binary test.axf test.bin`
154			`$(SIZE_$(ARCH)) test.axf`
155			`mv test.axf code.axf`
156			`mv test.bin code.bin`
157			`mv test.lst code.lst`
158			`mv test.sec code.sec`
159			`mv test.cnt code.cnt`
160			`mv test.map code.map`
161			`hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt`
162
163			`test64:`
164			`$(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s`
165			`$(GCC_$(ARCH)) -o libc.o lib/libc.c`
166			`$(GCC_$(ARCH)) -o test64.o app/test64.c`
167			`$(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \`
168			`crt0.o libc.o test64.o`
169			`$(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst`
170			`$(DUMP_$(ARCH)) -h test.axf > test.sec`
171			`$(DUMP_$(ARCH)) -s test.axf > test.cnt`
172			`$(OBJ_$(ARCH)) -O binary test.axf test.bin`
173			`$(SIZE_$(ARCH)) test.axf`
174			`mv test.axf code.axf`
175			`mv test.bin code.bin`
176			`mv test.lst code.lst`
177			`mv test.sec code.sec`
178			`mv test.cnt code.cnt`
179			`mv test.map code.map`
180			`hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt`
181
182			`test_crc:`
183			`$(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s`
184			`$(GCC_$(ARCH)) -o libc.o lib/libc.c`
185			`$(GCC_$(ARCH)) -o test_crc.o app/test_crc.c`
186			`$(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \`
187			`crt0.o libc.o test_crc.o`
188			`$(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst`
189			`$(DUMP_$(ARCH)) -h test.axf > test.sec`
190			`$(DUMP_$(ARCH)) -s test.axf > test.cnt`
191			`$(OBJ_$(ARCH)) -O binary test.axf test.bin`
192			`$(SIZE_$(ARCH)) test.axf`
193			`mv test.axf code.axf`
194			`mv test.bin code.bin`
195			`mv test.lst code.lst`
196			`mv test.sec code.sec`
197			`mv test.cnt code.cnt`
198			`mv test.map code.map`
199			`hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt`
200
201			`xtea:`
202			`$(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s`
203			`$(GCC_$(ARCH)) -o libc.o lib/libc.c`
204			`$(GCC_$(ARCH)) -o xtea.o app/xtea.c`
205			`$(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \`
206			`crt0.o libc.o xtea.o`
207			`$(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst`
208			`$(DUMP_$(ARCH)) -h test.axf > test.sec`
209			`$(DUMP_$(ARCH)) -s test.axf > test.cnt`
210			`$(OBJ_$(ARCH)) -O binary test.axf test.bin`
211			`$(SIZE_$(ARCH)) test.axf`
212			`mv test.axf code.axf`
213			`mv test.bin code.bin`
214			`mv test.lst code.lst`
215			`mv test.sec code.sec`
216			`mv test.cnt code.cnt`
217			`mv test.map code.map`
218			`hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt`
219
220			`xtea_hw:`
221			`$(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s`
222			`$(GCC_$(ARCH)) -o libc.o lib/libc.c`
223			`$(GCC_$(ARCH)) -o xtea_hw.o app/xtea_hw.c`
224			`$(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \`
225			`crt0.o libc.o xtea_hw.o`
226			`$(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst`
227			`$(DUMP_$(ARCH)) -h test.axf > test.sec`
228			`$(DUMP_$(ARCH)) -s test.axf > test.cnt`
229			`$(OBJ_$(ARCH)) -O binary test.axf test.bin`
230			`$(SIZE_$(ARCH)) test.axf`
231			`mv test.axf code.axf`
232			`mv test.bin code.bin`
233			`mv test.lst code.lst`
234			`mv test.sec code.sec`
235			`mv test.cnt code.cnt`
236			`mv test.map code.map`
237			`hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt`
238
239			`test_spi:`
240			`$(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s`
241			`$(GCC_$(ARCH)) -o libc.o lib/libc.c`
242			`$(GCC_$(ARCH)) -o spi.o lib/spi.c`
243			`$(GCC_$(ARCH)) -o test_spi.o app/test_spi.c`
244			`$(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \`
245			`crt0.o libc.o spi.o test_spi.o`
246			`$(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst`
247			`$(DUMP_$(ARCH)) -h test.axf > test.sec`
248			`$(DUMP_$(ARCH)) -s test.axf > test.cnt`
249			`$(OBJ_$(ARCH)) -O binary test.axf test.bin`
250			`$(SIZE_$(ARCH)) test.axf`
251			`mv test.axf code.axf`
252			`mv test.bin code.bin`
253			`mv test.lst code.lst`
254			`mv test.sec code.sec`
255			`mv test.cnt code.cnt`
256			`mv test.map code.map`
257			`hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt`
258
259			`exp_io:`
260			`$(AS_$(ARCH)) -o crt0.o lib/$(ARCH)/crt0.s`
261			`$(GCC_$(ARCH)) -o libc.o lib/libc.c`
262			`$(GCC_$(ARCH)) -o spi.o lib/spi.c`
263			`$(GCC_$(ARCH)) -o mcp23s17.o lib/mcp23s17.c`
264			`$(GCC_$(ARCH)) -o exp_io.o app/exp_io.c`
265			`$(LD_$(ARCH)) -Tlib/$(ARCH)/hf-risc.ld -Map test.map -N -o test.axf \`
266			`crt0.o libc.o spi.o mcp23s17.o exp_io.o`
267			`$(DUMP_$(ARCH)) --disassemble --reloc test.axf > test.lst`
268			`$(DUMP_$(ARCH)) -h test.axf > test.sec`
269			`$(DUMP_$(ARCH)) -s test.axf > test.cnt`
270			`$(OBJ_$(ARCH)) -O binary test.axf test.bin`
271			`$(SIZE_$(ARCH)) test.axf`
272			`mv test.axf code.axf`
273			`mv test.bin code.bin`
274			`mv test.lst code.lst`
275			`mv test.sec code.sec`
276			`mv test.cnt code.cnt`
277			`mv test.map code.map`
278			`hexdump -v -e '4/1 "%02x" "\n"' code.bin > code.txt`
279
280			`clean:`
281			`-rm -rf ~ .o .axf .map .lst .sec .cnt .txt .bin .vhd`
282			`-rm -rf app/*~`
283			`-rm -rf boot/*~`
284			`-rm -rf include/*~`
285			`-rm -rf lib/*~`