URL https://opencores.org/ocsvn/i2c/i2c/trunk

Subversion Repositories i2c

[/] [i2c/] [trunk/] [bench/] [verilog/] [i2c_slave_model.v] - Blame information for rev 68

Details | Compare with Previous | View Log


/////////////////////////////////////////////////////////////////////
////                                                             ////
////  WISHBONE rev.B2 compliant synthesizable I2C Slave model    ////
////                                                             ////
////                                                             ////
////  Authors: Richard Herveille (richard@asics.ws) www.asics.ws ////
////           John Sheahan (jrsheahan@optushome.com.au)         ////
////                                                             ////
////  Downloaded from: http://www.opencores.org/projects/i2c/    ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
////                                                             ////
//// Copyright (C) 2001,2002 Richard Herveille                   ////
////                         richard@asics.ws                    ////
////                                                             ////
//// This source file may be used and distributed without        ////
//// restriction provided that this copyright statement is not   ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer.////
////                                                             ////
////     THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY     ////
//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   ////
//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   ////
//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR      ////
//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,         ////
//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES    ////
//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE   ////
//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR        ////
//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  ////
//// LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT  ////
//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  ////
//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE         ////
//// POSSIBILITY OF SUCH DAMAGE.                                 ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
 
//  CVS Log
//
//  $Id: i2c_slave_model.v,v 1.7 2006-09-04 09:08:51 rherveille Exp $
//
//  $Date: 2006-09-04 09:08:51 $
//  $Revision: 1.7 $
//  $Author: rherveille $
//  $Locker:  $
//  $State: Exp $
//
// Change History:
//               $Log: not supported by cvs2svn $
//               Revision 1.6  2005/02/28 11:33:48  rherveille
//               Fixed Tsu:sta timing check.
//               Added Thd:sta timing check.
//
//               Revision 1.5  2003/12/05 11:05:19  rherveille
//               Fixed slave address MSB='1' bug
//
//               Revision 1.4  2003/09/11 08:25:37  rherveille
//               Fixed a bug in the timing section. Changed 'tst_scl' into 'tst_sto'.
//
//               Revision 1.3  2002/10/30 18:11:06  rherveille
//               Added timing tests to i2c_model.
//               Updated testbench.
//
//               Revision 1.2  2002/03/17 10:26:38  rherveille
//               Fixed some race conditions in the i2c-slave model.
//               Added debug information.
//               Added headers.
//
 
`include "timescale.v"
 
module i2c_slave_model (scl, sda);
 
        //
        // parameters
        //
        parameter I2C_ADR = 7'b001_0000;
 
        //
        // input && outpus
        //
        input scl;
        inout sda;
 
        //
        // Variable declaration
        //
        wire debug = 1'b1;
 
        reg [7:0] mem [3:0]; // initiate memory
        reg [7:0] mem_adr;   // memory address
        reg [7:0] mem_do;    // memory data output
 
        reg sta, d_sta;
        reg sto, d_sto;
 
        reg [7:0] sr;        // 8bit shift register
        reg       rw;        // read/write direction
 
        wire      my_adr;    // my address called ??
        wire      i2c_reset; // i2c-statemachine reset
        reg [2:0] bit_cnt;   // 3bit downcounter
        wire      acc_done;  // 8bits transfered
        reg       ld;        // load downcounter
 
        reg       sda_o;     // sda-drive level
        wire      sda_dly;   // delayed version of sda
 
        // statemachine declaration
        parameter idle        = 3'b000;
        parameter slave_ack   = 3'b001;
        parameter get_mem_adr = 3'b010;
        parameter gma_ack     = 3'b011;
        parameter data        = 3'b100;
        parameter data_ack    = 3'b101;
 
        reg [2:0] state; // synopsys enum_state
 
        //
        // module body
        //
 
        initial
        begin
           sda_o = 1'b1;
           state = idle;
        end
 
        // generate shift register
        always @(posedge scl)
          sr <= #1 {sr[6:0],sda};
 
        //detect my_address
        assign my_adr = (sr[7:1] == I2C_ADR);
        // FIXME: This should not be a generic assign, but rather
        // qualified on address transfer phase and probably reset by stop
 
        //generate bit-counter
        always @(posedge scl)
          if(ld)
            bit_cnt <= #1 3'b111;
          else
            bit_cnt <= #1 bit_cnt - 3'h1;
 
        //generate access done signal
        assign acc_done = !(|bit_cnt);
 
        // generate delayed version of sda
        // this model assumes a hold time for sda after the falling edge of scl.
        // According to the Phillips i2c spec, there s/b a 0 ns hold time for sda
        // with regards to scl. If the data changes coincident with the clock, the
        // acknowledge is missed
        // Fix by Michael Sosnoski
        assign #1 sda_dly = sda;
 
 
        //detect start condition
        always @(negedge sda)
          if(scl)
            begin
                sta   <= #1 1'b1;
                d_sta <= #1 1'b0;
                sto   <= #1 1'b0;
 
                if(debug)
                  $display("DEBUG i2c_slave; start condition detected at %t", $time);
            end
          else
            sta <= #1 1'b0;
 
        always @(posedge scl)
          d_sta <= #1 sta;
 
        // detect stop condition
        always @(posedge sda)
          if(scl)
            begin
               sta <= #1 1'b0;
               sto <= #1 1'b1;
 
               if(debug)
                 $display("DEBUG i2c_slave; stop condition detected at %t", $time);
            end
          else
            sto <= #1 1'b0;
 
        //generate i2c_reset signal
        assign i2c_reset = sta || sto;
 
        // generate statemachine
        always @(negedge scl or posedge sto)
          if (sto || (sta && !d_sta) )
            begin
                state <= #1 idle; // reset statemachine
 
                sda_o <= #1 1'b1;
                ld    <= #1 1'b1;
            end
          else
            begin
                // initial settings
                sda_o <= #1 1'b1;
                ld    <= #1 1'b0;
 
                case(state) // synopsys full_case parallel_case
                    idle: // idle state
                      if (acc_done && my_adr)
                        begin
                            state <= #1 slave_ack;
                            rw <= #1 sr[0];
                            sda_o <= #1 1'b0; // generate i2c_ack
 
                            #2;
                            if(debug && rw)
                              $display("DEBUG i2c_slave; command byte received (read) at %t", $time);
                            if(debug && !rw)
                              $display("DEBUG i2c_slave; command byte received (write) at %t", $time);
 
                            if(rw)
                              begin
                                  mem_do <= #1 mem[mem_adr];
 
                                  if(debug)
                                    begin
                                        #2 $display("DEBUG i2c_slave; data block read %x from address %x (1)", mem_do, mem_adr);
                                        #2 $display("DEBUG i2c_slave; memcheck [0]=%x, [1]=%x, [2]=%x", mem[4'h0], mem[4'h1], mem[4'h2]);
                                    end
                              end
                        end
 
                    slave_ack:
                      begin
                          if(rw)
                            begin
                                state <= #1 data;
                                sda_o <= #1 mem_do[7];
                            end
                          else
                            state <= #1 get_mem_adr;
 
                          ld    <= #1 1'b1;
                      end
 
                    get_mem_adr: // wait for memory address
                      if(acc_done)
                        begin
                            state <= #1 gma_ack;
                            mem_adr <= #1 sr; // store memory address
                            sda_o <= #1 !(sr <= 15); // generate i2c_ack, for valid address
 
                            if(debug)
                              #1 $display("DEBUG i2c_slave; address received. adr=%x, ack=%b", sr, sda_o);
                        end
 
                    gma_ack:
                      begin
                          state <= #1 data;
                          ld    <= #1 1'b1;
                      end
 
                    data: // receive or drive data
                      begin
                          if(rw)
                            sda_o <= #1 mem_do[7];
 
                          if(acc_done)
                            begin
                                state <= #1 data_ack;
                                mem_adr <= #2 mem_adr + 8'h1;
                                sda_o <= #1 (rw && (mem_adr <= 15) ); // send ack on write, receive ack on read
 
                                if(rw)
                                  begin
                                      #3 mem_do <= mem[mem_adr];
 
                                      if(debug)
                                        #5 $display("DEBUG i2c_slave; data block read %x from address %x (2)", mem_do, mem_adr);
                                  end
 
                                if(!rw)
                                  begin
                                      mem[ mem_adr[3:0] ] <= #1 sr; // store data in memory
 
                                      if(debug)
                                        #2 $display("DEBUG i2c_slave; data block write %x to address %x", sr, mem_adr);
                                  end
                            end
                      end
 
                    data_ack:
                      begin
                          ld <= #1 1'b1;
 
                          if(rw)
                            if(sr[0]) // read operation && master send NACK
                              begin
                                  state <= #1 idle;
                                  sda_o <= #1 1'b1;
                              end
                            else
                              begin
                                  state <= #1 data;
                                  sda_o <= #1 mem_do[7];
                              end
                          else
                            begin
                                state <= #1 data;
                                sda_o <= #1 1'b1;
                            end
                      end
 
                endcase
            end
 
        // read data from memory
        always @(posedge scl)
          if(!acc_done && rw)
            mem_do <= #1 {mem_do[6:0], 1'b1}; // insert 1'b1 for host ack generation
 
        // generate tri-states
        assign sda = sda_o ? 1'bz : 1'b0;
 
 
        //
        // Timing checks
        //
 
        wire tst_sto = sto;
        wire tst_sta = sta;
 
        specify
          specparam normal_scl_low  = 4700,
                    normal_scl_high = 4000,
                    normal_tsu_sta  = 4700,
                    normal_thd_sta  = 4000,
                    normal_tsu_sto  = 4000,
                    normal_tbuf     = 4700,
 
                    fast_scl_low  = 1300,
                    fast_scl_high =  600,
                    fast_tsu_sta  = 1300,
                    fast_thd_sta  =  600,
                    fast_tsu_sto  =  600,
                    fast_tbuf     = 1300;
 
          $width(negedge scl, normal_scl_low);  // scl low time
          $width(posedge scl, normal_scl_high); // scl high time
 
          $setup(posedge scl, negedge sda &&& scl, normal_tsu_sta); // setup start
          $setup(negedge sda &&& scl, negedge scl, normal_thd_sta); // hold start
          $setup(posedge scl, posedge sda &&& scl, normal_tsu_sto); // setup stop
 
          $setup(posedge tst_sta, posedge tst_sto, normal_tbuf); // stop to start time
        endspecify
 
endmodule
 
 

Line No.	Rev	Author	Line
1	19	rherveille	`/////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// WISHBONE rev.B2 compliant synthesizable I2C Slave model ////`
4			`//// ////`
5			`//// ////`
6			`//// Authors: Richard Herveille (richard@asics.ws) www.asics.ws ////`
7			`//// John Sheahan (jrsheahan@optushome.com.au) ////`
8			`//// ////`
9			`//// Downloaded from: http://www.opencores.org/projects/i2c/ ////`
10			`//// ////`
11			`/////////////////////////////////////////////////////////////////////`
12			`//// ////`
13			`//// Copyright (C) 2001,2002 Richard Herveille ////`
14			`//// richard@asics.ws ////`
15			`//// ////`
16			`//// This source file may be used and distributed without ////`
17			`//// restriction provided that this copyright statement is not ////`
18			`//// removed from the file and that any derivative work contains ////`
19			`//// the original copyright notice and the associated disclaimer.////`
20			`//// ////`
21			//// THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY ////
22			`//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED ////`
23			`//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ////`
24			`//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR ////`
25			`//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, ////`
26			`//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ////`
27			`//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE ////`
28			`//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR ////`
29			`//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ////`
30			`//// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ////`
31			`//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT ////`
32			`//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ////`
33			`//// POSSIBILITY OF SUCH DAMAGE. ////`
34			`//// ////`
35			`/////////////////////////////////////////////////////////////////////`
36
37			`// CVS Log`
38	10	rherveille	`//`
39	58	rherveille	`// $Id: i2c_slave_model.v,v 1.7 2006-09-04 09:08:51 rherveille Exp $`
40	10	rherveille	`//`
41	58	rherveille	`// $Date: 2006-09-04 09:08:51 $`
42			`// $Revision: 1.7 $`
43	19	rherveille	`// $Author: rherveille $`
44			`// $Locker: $`
45			`// $State: Exp $`
46			`//`
47			`// Change History:`
48			`// $Log: not supported by cvs2svn $`
49	58	rherveille	`// Revision 1.6 2005/02/28 11:33:48 rherveille`
50			`// Fixed Tsu:sta timing check.`
51			`// Added Thd:sta timing check.`
52			`//`
53	56	rherveille	`// Revision 1.5 2003/12/05 11:05:19 rherveille`
54			`// Fixed slave address MSB='1' bug`
55			`//`
56	46	rherveille	`// Revision 1.4 2003/09/11 08:25:37 rherveille`
57			`// Fixed a bug in the timing section. Changed 'tst_scl' into 'tst_sto'.`
58			`//`
59	43	rherveille	`// Revision 1.3 2002/10/30 18:11:06 rherveille`
60			`// Added timing tests to i2c_model.`
61			`// Updated testbench.`
62			`//`
63	25	rherveille	`// Revision 1.2 2002/03/17 10:26:38 rherveille`
64			`// Fixed some race conditions in the i2c-slave model.`
65			`// Added debug information.`
66			`// Added headers.`
67			`//`
68	10	rherveille
69			`include "timescale.v"
70
71			`module i2c_slave_model (scl, sda);`
72
73			`//`
74			`// parameters`
75			`//`
76			`parameter I2C_ADR = 7'b001_0000;`
77
78			`//`
79			`// input && outpus`
80			`//`
81			`input scl;`
82			`inout sda;`
83
84			`//`
85			`// Variable declaration`
86			`//`
87	19	rherveille	`wire debug = 1'b1;`
88
89	10	rherveille	`reg [7:0] mem [3:0]; // initiate memory`
90			`reg [7:0] mem_adr; // memory address`
91			`reg [7:0] mem_do; // memory data output`
92
93			`reg sta, d_sta;`
94			`reg sto, d_sto;`
95
96			`reg [7:0] sr; // 8bit shift register`
97			`reg rw; // read/write direction`
98
99			`wire my_adr; // my address called ??`
100			`wire i2c_reset; // i2c-statemachine reset`
101			`reg [2:0] bit_cnt; // 3bit downcounter`
102			`wire acc_done; // 8bits transfered`
103			`reg ld; // load downcounter`
104
105			`reg sda_o; // sda-drive level`
106	25	rherveille	`wire sda_dly; // delayed version of sda`
107	10	rherveille
108			`// statemachine declaration`
109			`parameter idle = 3'b000;`
110			`parameter slave_ack = 3'b001;`
111			`parameter get_mem_adr = 3'b010;`
112			`parameter gma_ack = 3'b011;`
113			`parameter data = 3'b100;`
114			`parameter data_ack = 3'b101;`
115
116			`reg [2:0] state; // synopsys enum_state`
117
118			`//`
119			`// module body`
120			`//`
121
122			`initial`
123	25	rherveille	`begin`
124			`sda_o = 1'b1;`
125			`state = idle;`
126			`end`
127	10	rherveille
128			`// generate shift register`
129	25	rherveille	`always @(posedge scl)`
130			`sr <= #1 {sr[6:0],sda};`
131	10	rherveille
132			`//detect my_address`
133			`assign my_adr = (sr[7:1] == I2C_ADR);`
134	25	rherveille	`// FIXME: This should not be a generic assign, but rather`
135	19	rherveille	`// qualified on address transfer phase and probably reset by stop`
136	10	rherveille
137			`//generate bit-counter`
138	25	rherveille	`always @(posedge scl)`
139			`if(ld)`
140			`bit_cnt <= #1 3'b111;`
141			`else`
142			`bit_cnt <= #1 bit_cnt - 3'h1;`
143
144	10	rherveille	`//generate access done signal`
145			`assign acc_done = !(\|bit_cnt);`
146
147	25	rherveille	`// generate delayed version of sda`
148			`// this model assumes a hold time for sda after the falling edge of scl.`
149			`// According to the Phillips i2c spec, there s/b a 0 ns hold time for sda`
150			`// with regards to scl. If the data changes coincident with the clock, the`
151			`// acknowledge is missed`
152			`// Fix by Michael Sosnoski`
153			`assign #1 sda_dly = sda;`
154
155
156	10	rherveille	`//detect start condition`
157	25	rherveille	`always @(negedge sda)`
158			`if(scl)`
159			`begin`
160	46	rherveille	`sta <= #1 1'b1;`
161			`d_sta <= #1 1'b0;`
162			`sto <= #1 1'b0;`
163	19	rherveille
164	25	rherveille	`if(debug)`
165			`$display("DEBUG i2c_slave; start condition detected at %t", $time);`
166			`end`
167			`else`
168			`sta <= #1 1'b0;`
169	10	rherveille
170	25	rherveille	`always @(posedge scl)`
171			`d_sta <= #1 sta;`
172	10	rherveille
173			`// detect stop condition`
174	25	rherveille	`always @(posedge sda)`
175			`if(scl)`
176			`begin`
177	46	rherveille	`sta <= #1 1'b0;`
178	25	rherveille	`sto <= #1 1'b1;`
179	19	rherveille
180	25	rherveille	`if(debug)`
181			`$display("DEBUG i2c_slave; stop condition detected at %t", $time);`
182			`end`
183			`else`
184			`sto <= #1 1'b0;`
185	10	rherveille
186			`//generate i2c_reset signal`
187			`assign i2c_reset = sta \|\| sto;`
188
189			`// generate statemachine`
190	25	rherveille	`always @(negedge scl or posedge sto)`
191			`if (sto \|\| (sta && !d_sta) )`
192			`begin`
193			`state <= #1 idle; // reset statemachine`
194	10	rherveille
195	25	rherveille	`sda_o <= #1 1'b1;`
196			`ld <= #1 1'b1;`
197			`end`
198			`else`
199			`begin`
200			`// initial settings`
201			`sda_o <= #1 1'b1;`
202			`ld <= #1 1'b0;`
203	19	rherveille
204	25	rherveille	`case(state) // synopsys full_case parallel_case`
205			`idle: // idle state`
206			`if (acc_done && my_adr)`
207			`begin`
208			`state <= #1 slave_ack;`
209			`rw <= #1 sr[0];`
210			`sda_o <= #1 1'b0; // generate i2c_ack`
211	19	rherveille
212	25	rherveille	`#2;`
213			`if(debug && rw)`
214			`$display("DEBUG i2c_slave; command byte received (read) at %t", $time);`
215			`if(debug && !rw)`
216			`$display("DEBUG i2c_slave; command byte received (write) at %t", $time);`
217	19	rherveille
218	25	rherveille	`if(rw)`
219			`begin`
220			`mem_do <= #1 mem[mem_adr];`
221	19	rherveille
222	25	rherveille	`if(debug)`
223			`begin`
224			`#2 $display("DEBUG i2c_slave; data block read %x from address %x (1)", mem_do, mem_adr);`
225			`#2 $display("DEBUG i2c_slave; memcheck [0]=%x, [1]=%x, [2]=%x", mem[4'h0], mem[4'h1], mem[4'h2]);`
226			`end`
227			`end`
228			`end`
229	10	rherveille
230	25	rherveille	`slave_ack:`
231			`begin`
232			`if(rw)`
233			`begin`
234			`state <= #1 data;`
235			`sda_o <= #1 mem_do[7];`
236			`end`
237			`else`
238			`state <= #1 get_mem_adr;`
239	10	rherveille
240	25	rherveille	`ld <= #1 1'b1;`
241			`end`
242	10	rherveille
243	25	rherveille	`get_mem_adr: // wait for memory address`
244			`if(acc_done)`
245			`begin`
246			`state <= #1 gma_ack;`
247			`mem_adr <= #1 sr; // store memory address`
248			`sda_o <= #1 !(sr <= 15); // generate i2c_ack, for valid address`
249	10	rherveille
250	25	rherveille	`if(debug)`
251			`#1 $display("DEBUG i2c_slave; address received. adr=%x, ack=%b", sr, sda_o);`
252			`end`
253	10	rherveille
254	25	rherveille	`gma_ack:`
255			`begin`
256			`state <= #1 data;`
257			`ld <= #1 1'b1;`
258			`end`
259	19	rherveille
260	25	rherveille	`data: // receive or drive data`
261			`begin`
262			`if(rw)`
263			`sda_o <= #1 mem_do[7];`
264	10	rherveille
265	25	rherveille	`if(acc_done)`
266			`begin`
267			`state <= #1 data_ack;`
268			`mem_adr <= #2 mem_adr + 8'h1;`
269			`sda_o <= #1 (rw && (mem_adr <= 15) ); // send ack on write, receive ack on read`
270	10	rherveille
271	25	rherveille	`if(rw)`
272			`begin`
273			`#3 mem_do <= mem[mem_adr];`
274	19	rherveille
275	25	rherveille	`if(debug)`
276			`#5 $display("DEBUG i2c_slave; data block read %x from address %x (2)", mem_do, mem_adr);`
277			`end`
278	19	rherveille
279	25	rherveille	`if(!rw)`
280			`begin`
281			`mem[ mem_adr[3:0] ] <= #1 sr; // store data in memory`
282	10	rherveille
283	25	rherveille	`if(debug)`
284			`#2 $display("DEBUG i2c_slave; data block write %x to address %x", sr, mem_adr);`
285			`end`
286			`end`
287			`end`
288	10	rherveille
289	25	rherveille	`data_ack:`
290			`begin`
291			`ld <= #1 1'b1;`
292	19	rherveille
293	25	rherveille	`if(rw)`
294	58	rherveille	`if(sr[0]) // read operation && master send NACK`
295	25	rherveille	`begin`
296			`state <= #1 idle;`
297			`sda_o <= #1 1'b1;`
298			`end`
299			`else`
300			`begin`
301			`state <= #1 data;`
302			`sda_o <= #1 mem_do[7];`
303			`end`
304			`else`
305			`begin`
306			`state <= #1 data;`
307			`sda_o <= #1 1'b1;`
308			`end`
309			`end`
310	19	rherveille
311	25	rherveille	`endcase`
312			`end`
313	10	rherveille
314	25	rherveille	`// read data from memory`
315			`always @(posedge scl)`
316			`if(!acc_done && rw)`
317			`mem_do <= #1 {mem_do[6:0], 1'b1}; // insert 1'b1 for host ack generation`
318	10	rherveille
319	25	rherveille	`// generate tri-states`
320			`assign sda = sda_o ? 1'bz : 1'b0;`
321	10	rherveille
322
323	25	rherveille	`//`
324			`// Timing checks`
325			`//`
326	10	rherveille
327	25	rherveille	`wire tst_sto = sto;`
328			`wire tst_sta = sta;`
329
330			`specify`
331			`specparam normal_scl_low = 4700,`
332			`normal_scl_high = 4000,`
333			`normal_tsu_sta = 4700,`
334	56	rherveille	`normal_thd_sta = 4000,`
335	25	rherveille	`normal_tsu_sto = 4000,`
336	56	rherveille	`normal_tbuf = 4700,`
337	25	rherveille
338			`fast_scl_low = 1300,`
339			`fast_scl_high = 600,`
340			`fast_tsu_sta = 1300,`
341	56	rherveille	`fast_thd_sta = 600,`
342	25	rherveille	`fast_tsu_sto = 600,`
343	56	rherveille	`fast_tbuf = 1300;`
344	25	rherveille
345	56	rherveille	`$width(negedge scl, normal_scl_low); // scl low time`
346			`$width(posedge scl, normal_scl_high); // scl high time`
347	25	rherveille
348	56	rherveille	`$setup(posedge scl, negedge sda &&& scl, normal_tsu_sta); // setup start`
349			`$setup(negedge sda &&& scl, negedge scl, normal_thd_sta); // hold start`
350			`$setup(posedge scl, posedge sda &&& scl, normal_tsu_sto); // setup stop`
351	25	rherveille
352	56	rherveille	`$setup(posedge tst_sta, posedge tst_sto, normal_tbuf); // stop to start time`
353	25	rherveille	`endspecify`
354
355	10	rherveille	`endmodule`
356
357

Browse

Tools

Subversion Repositories i2c

[/] [i2c/] [trunk/] [bench/] [verilog/] [i2c_slave_model.v] - Blame information for rev 68