Subversion Repositories i2c

---------------------------------------------------------------------

----                                                             ----

----  WISHBONE revB2 compl. I2C Master Core; top level           ----

----                                                             ----

----                                                             ----

----  Author: Richard Herveille                                  ----

----          richard@asics.ws                                   ----

----          www.asics.ws                                       ----

----                                                             ----

----  Downloaded from: http://www.opencores.org/projects/i2c/    ----

----                                                             ----

---------------------------------------------------------------------

----                                                             ----

---- Copyright (C) 2000 Richard Herveille                        ----

----                    richard@asics.ws                         ----

----                                                             ----

---- This source file may be used and distributed without        ----

---- restriction provided that this copyright statement is not   ----

---- removed from the file and that any derivative work contains ----

---- the original copyright notice and the associated disclaimer.----

----                                                             ----

----     THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY     ----

---- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   ----

---- TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   ----

---- FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR      ----

---- OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,         ----

---- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES    ----

---- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE   ----

---- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR        ----

---- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  ----

---- LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT  ----

---- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  ----

---- OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE         ----

---- POSSIBILITY OF SUCH DAMAGE.                                 ----

----                                                             ----

---------------------------------------------------------------------

--  CVS Log

--

--  $Id: i2c_master_top.vhd,v 1.6 2003-08-09 07:01:13 rherveille Exp $

--

--  $Date: 2003-08-09 07:01:13 $

--  $Revision: 1.6 $

--  $Author: rherveille $

--  $Locker:  $

--  $State: Exp $

--

-- Change History:

--               $Log: not supported by cvs2svn $

--               Revision 1.5  2003/02/01 02:03:06  rherveille

--               Fixed a few 'arbitration lost' bugs. VHDL version only.

--

--               Revision 1.4  2002/12/26 16:05:47  rherveille

--               Core is now a Multimaster I2C controller.

--

--               Revision 1.3  2002/11/30 22:24:37  rherveille

--               Cleaned up code

--

--               Revision 1.2  2001/11/10 10:52:44  rherveille

--               Changed PRER reset value from 0x0000 to 0xffff, conform specs.

--

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_arith.all;

entity i2c_master_top is

        generic(

                ARST_LVL : std_logic := '0'                   -- asynchronous reset level

        );

        port (

                -- wishbone signals

                wb_clk_i  : in  std_logic;                    -- master clock input

                wb_rst_i  : in  std_logic := '0';             -- synchronous active high reset

                arst_i    : in  std_logic := not ARST_LVL;    -- asynchronous reset

                wb_adr_i  : in  unsigned(2 downto 0);         -- lower address bits

                wb_dat_i  : in  std_logic_vector(7 downto 0); -- Databus input

                wb_dat_o  : out std_logic_vector(7 downto 0); -- Databus output

                wb_we_i   : in  std_logic;                    -- Write enable input

                wb_stb_i  : in  std_logic;                    -- Strobe signals / core select signal

                wb_cyc_i  : in  std_logic;                    -- Valid bus cycle input

                wb_ack_o  : out std_logic;                    -- Bus cycle acknowledge output

                wb_inta_o : out std_logic;                    -- interrupt request output signal

                -- i2c lines

                scl_pad_i     : in  std_logic;                -- i2c clock line input

                scl_pad_o     : out std_logic;                -- i2c clock line output

                scl_padoen_o  : out std_logic;                -- i2c clock line output enable, active low

                sda_pad_i     : in  std_logic;                -- i2c data line input

                sda_pad_o     : out std_logic;                -- i2c data line output

                sda_padoen_o  : out std_logic                 -- i2c data line output enable, active low

        );

end entity i2c_master_top;

architecture structural of i2c_master_top is

        component i2c_master_byte_ctrl is

        port (

                clk    : in std_logic;

                rst    : in std_logic; -- synchronous active high reset (WISHBONE compatible)

                nReset : in std_logic;  -- asynchornous active low reset (FPGA compatible)

                ena    : in std_logic; -- core enable signal

                clk_cnt : in unsigned(15 downto 0);      -- 4x SCL

                -- input signals

                start,

                stop,

                read,

                write,

                ack_in : std_logic;

                din    : in std_logic_vector(7 downto 0);

                -- output signals

                cmd_ack  : out std_logic;

                ack_out  : out std_logic;

                i2c_busy : out std_logic;

                i2c_al   : out std_logic;

                dout     : out std_logic_vector(7 downto 0);

                -- i2c lines

                scl_i   : in std_logic;  -- i2c clock line input

                scl_o   : out std_logic; -- i2c clock line output

                scl_oen : out std_logic; -- i2c clock line output enable, active low

                sda_i   : in std_logic;  -- i2c data line input

                sda_o   : out std_logic; -- i2c data line output

                sda_oen : out std_logic  -- i2c data line output enable, active low

        );

        end component i2c_master_byte_ctrl;

        -- registers

        signal prer : unsigned(15 downto 0);             -- clock prescale register

        signal ctr  : std_logic_vector(7 downto 0);      -- control register

        signal txr  : std_logic_vector(7 downto 0);      -- transmit register

        signal rxr  : std_logic_vector(7 downto 0);      -- receive register

        signal cr   : std_logic_vector(7 downto 0);      -- command register

        signal sr   : std_logic_vector(7 downto 0);      -- status register

        -- internal reset signal

        signal rst_i : std_logic;

        -- wishbone write access

        signal wb_wacc : std_logic;

        -- internal acknowledge signal

        signal iack_o : std_logic;

        -- done signal: command completed, clear command register

        signal done : std_logic;

        -- command register signals

        signal sta, sto, rd, wr, ack, iack : std_logic;

        signal core_en : std_logic;                      -- core enable signal

        signal ien     : std_logic;                      -- interrupt enable signal

        -- status register signals

        signal irxack, rxack : std_logic;                -- received aknowledge from slave

        signal tip           : std_logic;                -- transfer in progress

        signal irq_flag      : std_logic;                -- interrupt pending flag

        signal i2c_busy      : std_logic;                -- i2c bus busy (start signal detected)

        signal i2c_al, al    : std_logic;                -- arbitration lost

begin

        -- generate internal reset signal

        rst_i <= arst_i xor ARST_LVL;

        -- generate acknowledge output signal

        gen_ack_o : process(wb_clk_i)

        begin

            if (wb_clk_i'event and wb_clk_i = '1') then

              iack_o <= wb_cyc_i and wb_stb_i and not iack_o;         -- because timing is always honored

            end if;

        end process gen_ack_o;

        wb_ack_o <= iack_o;

        -- generate wishbone write access signal

        wb_wacc <= wb_cyc_i and wb_stb_i and wb_we_i;

        -- assign wb_dat_o

        assign_dato : process(wb_clk_i)

        begin

            if (wb_clk_i'event and wb_clk_i = '1') then

              case wb_adr_i is

                when "000"  => wb_dat_o <= std_logic_vector(prer( 7 downto 0));

                when "001"  => wb_dat_o <= std_logic_vector(prer(15 downto 8));

                when "010"  => wb_dat_o <= ctr;

                when "011"  => wb_dat_o <= rxr; -- write is transmit register TxR

                when "100"  => wb_dat_o <= sr;  -- write is command register CR

                -- Debugging registers:

                -- These registers are not documented.

                -- Functionality could change in future releases

                when "101"  => wb_dat_o <= txr;

                when "110"  => wb_dat_o <= cr;

                when "111"  => wb_dat_o <= (others => '0');

                when others => wb_dat_o <= (others => 'X');     -- for simulation only

              end case;

            end if;

        end process assign_dato;

        -- generate registers (CR, SR see below)

        gen_regs: process(rst_i, wb_clk_i)

        begin

            if (rst_i = '0') then

              prer <= (others => '1');

              ctr  <= (others => '0');

              txr  <= (others => '0');

            elsif (wb_clk_i'event and wb_clk_i = '1') then

              if (wb_rst_i = '1') then

                prer <= (others => '1');

                ctr  <= (others => '0');

                txr  <= (others => '0');

              elsif (wb_wacc = '1') then

                case wb_adr_i is

                   when "000" => prer( 7 downto 0) <= unsigned(wb_dat_i);

                   when "001" => prer(15 downto 8) <= unsigned(wb_dat_i);

                   when "010" => ctr               <= wb_dat_i;

                   when "011" => txr               <= wb_dat_i;

                   -- illegal cases, for simulation only

                   when others =>

                      report ("Illegal write address, setting all registers to unknown.");

                      prer <= (others => 'X');

                      ctr  <= (others => 'X');

                      txr  <= (others => 'X');

                end case;

              end if;

            end if;

        end process gen_regs;

        -- generate command register

        gen_cr: process(rst_i, wb_clk_i)

        begin

            if (rst_i = '0') then

                cr <= (others => '0');

            elsif (wb_clk_i'event and wb_clk_i = '1') then

                if (wb_rst_i = '1') then

                    cr <= (others => '0');

                elsif (wb_wacc = '1') then

                    if ( (core_en = '1') and (wb_adr_i = 4) ) then

                        -- only take new commands when i2c core enabled

                        -- pending commands are finished

                        cr <= wb_dat_i;

                    end if;

                else

                    if (done = '1' or i2c_al = '1') then

                        cr(7 downto 4) <= (others => '0'); -- clear command bits when command done or arbitration lost

                    end if;

                    cr(2 downto 1) <= (others => '0');   -- reserved bits, always '0'

                    cr(0) <= '0';                        -- clear IRQ_ACK bit

                end if;

            end if;

        end process gen_cr;

        -- decode command register

        sta  <= cr(7);

        sto  <= cr(6);

        rd   <= cr(5);

        wr   <= cr(4);

        ack  <= cr(3);

        iack <= cr(0);

        -- decode control register

        core_en <= ctr(7);

        ien     <= ctr(6);

        -- hookup byte controller block

        byte_ctrl: i2c_master_byte_ctrl port map (

                clk      => wb_clk_i,

                rst      => wb_rst_i,

                nReset   => rst_i,

                ena      => core_en,

                clk_cnt  => prer,

                start    => sta,

                stop     => sto,

                read     => rd,

                write    => wr,

                ack_in   => ack,

                i2c_busy => i2c_busy,

                i2c_al   => i2c_al,

                din      => txr,

                cmd_ack  => done,

                ack_out  => irxack,

                dout     => rxr,

                scl_i    => scl_pad_i,

                scl_o    => scl_pad_o,

                scl_oen  => scl_padoen_o,

                sda_i    => sda_pad_i,

                sda_o    => sda_pad_o,

                sda_oen  => sda_padoen_o

        );

        -- status register block + interrupt request signal

        st_irq_block : block

        begin

            -- generate status register bits

            gen_sr_bits: process (wb_clk_i, rst_i)

            begin

                if (rst_i = '0') then

                  al       <= '0';

                  rxack    <= '0';

                  tip      <= '0';

                  irq_flag <= '0';

                elsif (wb_clk_i'event and wb_clk_i = '1') then

                  if (wb_rst_i = '1') then

                    al       <= '0';

                    rxack    <= '0';

                    tip      <= '0';

                    irq_flag <= '0';

                  else

                    al       <= i2c_al or (al and not sta);

                    rxack    <= irxack;

                    tip      <= (rd or wr);

                    -- interrupt request flag is always generated

                    irq_flag <= (done or i2c_al or irq_flag) and not iack;

                  end if;

                end if;

            end process gen_sr_bits;

            -- generate interrupt request signals

            gen_irq: process (wb_clk_i, rst_i)

            begin

                if (rst_i = '0') then

                  wb_inta_o <= '0';

                elsif (wb_clk_i'event and wb_clk_i = '1') then

                  if (wb_rst_i = '1') then

                    wb_inta_o <= '0';

                  else

                    -- interrupt signal is only generated when IEN (interrupt enable bit) is set

                    wb_inta_o <= irq_flag and ien;

                  end if;

                end if;

            end process gen_irq;

            -- assign status register bits

            sr(7)          <= rxack;

            sr(6)          <= i2c_busy;

            sr(5)          <= al;

            sr(4 downto 2) <= (others => '0'); -- reserved

            sr(1)          <= tip;

            sr(0)          <= irq_flag;

        end block;

end architecture structural;