Subversion Repositories i8255

`timescale 1ns / 1ps

////////////////////////////////////////////////////////////////////////////////

// Company: 

// Engineer:

//

// Create Date:   00:16:54 11/16/2009

// Design Name:   i8255

// Module Name:   /home/malasar/projects/fpga/i8080/tsti8255.v

// Project Name:  i8080

// Target Device:  

// Tool versions:  

// Description: 

//

// Verilog Test Fixture created by ISE for module: i8255

//

// Dependencies:

// 

// Revision:

// Revision 0.01 - File Created

// Additional Comments:

// 

////////////////////////////////////////////////////////////////////////////////

module tsti8255;

        // Inputs

        reg reset;

        reg ncs;

        reg nrd;

        reg nwr;

        reg [1:0] addr;

        // Bidirs

        wire [7:0] data;

        wire [7:0] pa;

        reg pae;

        wire [7:0] pb;

        reg pbe;

        wire [3:0] pch;

        reg pche;

        wire [3:0] pcl;

        reg pcle;

        wire clk;

        reg oflag;

        reg pause;

        reg [7:0] newval;

        reg [7:0] step;

        reg [7:0] wrtport;

        reg [7:0] resetret;

        reg [7:0] writeret;

   clck clk1(clk);

        // Instantiate the Unit Under Test (UUT)

        i8255 uut (

                .data(data),

                .reset(reset),

                .ncs(ncs),

                .nrd(nrd),

                .nwr(nwr),

                .addr(addr),

                .pa(pa),

                .pb(pb),

                .pch(pch),

                .pcl(pcl)

        );

        initial begin

                // Initialize Inputs

                reset <= 1;

                pae<=0;

                pche<=0;

                wrtport<=0;

                pause<=0;

                ncs <= 1;

                nrd <= 1;

                nwr <= 1;

                addr <= 2'b11;

                oflag<=0;

                newval<=0;

                step<=6;

                resetret<=0;

                writeret<=0;

                #10 $finish();

                // Add stimulus here

        end

        assign data=(oflag)?newval:8'bz;

        assign pa=(pae)?wrtport:8'bz;

        assign pch=(pche)?wrtport[7:4]:8'bz;

        always @(posedge clk) begin

                if (reset==1) begin

                        ncs<=0;

                        reset<=0; //#2

                        end

                else begin

                        case (step)

                                0: begin

                                        newval<=8'b10000000; //#4

                                        oflag<=1;

                                        step<=33;

                                        resetret<=2;

                                        writeret<=32;

                                        ncs<=0;

                                        end

                                2: begin

                                   newval<=8'h35; //#10

                                        oflag<=1;

                                        addr<=0;

                                        step<=33;

                                        resetret<=3;

                                        writeret<=32;

                                        end

                                3: begin

                                   newval=8'h0;

                                        nrd=1;

                                        nwr=1;

                                        step=4;

                                        end

                                4: begin

                                        newval=8'b10100000;

                                        addr=2;

                                        nrd=1;

                                        nwr=0;

                                        step=5;

                                        end

                                6: begin

                                        newval=8'b10010000; //a-output, c -input //#4

                                        addr=3;

                                        oflag=1;

                                        pae=0;

                                        step=33;

                                        resetret=7;

                                        writeret=32;

                                        end

                                7: begin

                                        wrtport=8'b11010000; //#10

                                        pae=1;

                                        //pche=1;

                                        oflag=0;

                                        addr=0;

                                        nrd=0;

                                        nwr=1;

                                        step=32;

                                        resetret=8;

                                        end

                                8: begin

                                        newval=8'b10100000;

                                        //pae=0;

                                        pche=1;

                                        oflag=1;

                                        addr=0;

                                        nrd=1;

                                        nwr=0;

                                        step=10;

                                        end

                                9: begin

                                        pae=0;

                                        addr=0;

                                        nrd=0;

                                        nwr=1;

                                        step=10;

                                        end

                                32: begin

                                        oflag=0;

                                        nrd=1;

                                        nwr=1;

                                        step=resetret;

                                        end

                                33: begin //write routine

                                        nwr=0;

                                        nrd=1;

                                        step=writeret;

                                        end

                        endcase

                        end

                end

endmodule