Subversion Repositories iicmb

; Copyright 1991-2007 Mentor Graphics Corporation

;

; All Rights Reserved.

;

; THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS THE PROPERTY OF

; MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS SUBJECT TO LICENSE TERMS.

;

[Library]

others = $MODEL_TECH/../modelsim.ini

;vhdl_psl_checkers = $MODEL_TECH/../vhdl_psl_checkers       // Source files only for this release

;verilog_psl_checkers = $MODEL_TECH/../verilog_psl_checkers // Source files only for this release

;unisims_ver = $XILINX/../../ISE_lib/unisims_ver

;unimacro_ver = $XILINX/../../ISE_lib/unimacro_ver

;xilinxcorelib_ver = $XILINX/../../ISE_lib/XilinxCoreLib_ver

;simprims_ver = $XILINX/../../ISE_lib/simprims_ver

;secureip = $XILINX/../../ISE_lib/secureip

;unisim = $XILINX/../../ISE_lib/unisim

;unimacro = $XILINX/../../ISE_lib/unimacro

;xilinxcorelib = $XILINX/../../ISE_lib/XilinxCoreLib

;simprim = $XILINX/../../ISE_lib/simprim

iicmb = iicmb

work  = work

[vcom]

; VHDL93 variable selects language version as the default.

; Default is VHDL-2002.

; Value of 0 or 1987 for VHDL-1987.

; Value of 1 or 1993 for VHDL-1993.

; Default or value of 2 or 2002 for VHDL-2002.

VHDL93 = 2002

; Show source line containing error. Default is off.

; Show_source = 1

; Turn off unbound-component warnings. Default is on.

; Show_Warning1 = 0

; Turn off process-without-a-wait-statement warnings. Default is on.

; Show_Warning2 = 0

; Turn off null-range warnings. Default is on.

; Show_Warning3 = 0

; Turn off no-space-in-time-literal warnings. Default is on.

; Show_Warning4 = 0

; Turn off multiple-drivers-on-unresolved-signal warnings. Default is on.

; Show_Warning5 = 0

; Turn off optimization for IEEE std_logic_1164 package. Default is on.

; Optimize_1164 = 0

; Turn on resolving of ambiguous function overloading in favor of the

; "explicit" function declaration (not the one automatically created by

; the compiler for each type declaration). Default is off.

; The .ini file has Explicit enabled so that std_logic_signed/unsigned

; will match the behavior of synthesis tools.

Explicit = 1

; Turn off acceleration of the VITAL packages. Default is to accelerate.

; NoVital = 1

; Turn off VITAL compliance checking. Default is checking on.

; NoVitalCheck = 1

; Ignore VITAL compliance checking errors. Default is to not ignore.

; IgnoreVitalErrors = 1

; Turn off VITAL compliance checking warnings. Default is to show warnings.

; Show_VitalChecksWarnings = 0

; Turn off PSL assertion warning messages. Default is to show warnings.

; Show_PslChecksWarnings = 0

; Enable parsing of embedded PSL assertions. Default is enabled.

; EmbeddedPsl = 0

; Keep silent about case statement static warnings.

; Default is to give a warning.

; NoCaseStaticError = 1

; Keep silent about warnings caused by aggregates that are not locally static.

; Default is to give a warning.

; NoOthersStaticError = 1

; Treat as errors:

;   case statement static warnings

;   warnings caused by aggregates that are not locally static

; Overrides NoCaseStaticError, NoOthersStaticError settings.

; PedanticErrors = 1

; Turn off inclusion of debugging info within design units.

; Default is to include debugging info.

; NoDebug = 1

; Turn off "Loading..." messages. Default is messages on.

; Quiet = 1

; Turn on some limited synthesis rule compliance checking. Checks only:

;    -- signals used (read) by a process must be in the sensitivity list

; CheckSynthesis = 1

; Activate optimizations on expressions that do not involve signals,

; waits, or function/procedure/task invocations. Default is off.

; ScalarOpts = 1

; Turns on lint-style checking.

; Show_Lint = 1

; Require the user to specify a configuration for all bindings,

; and do not generate a compile time default binding for the

; component. This will result in an elaboration error of

; 'component not bound' if the user fails to do so. Avoids the rare

; issue of a false dependency upon the unused default binding.

; RequireConfigForAllDefaultBinding = 1

; Perform default binding at compile time.

; Default is to do default binding at load time.

; BindAtCompile=1;

; Inhibit range checking on subscripts of arrays. Range checking on

; scalars defined with subtypes is inhibited by default.

; NoIndexCheck = 1

; Inhibit range checks on all (implicit and explicit) assignments to

; scalar objects defined with subtypes.

; NoRangeCheck = 1

; Run the 0in tools from within the simulator.

; Default value set to 0. Please set it to 1 to invoke 0in.

; VcomZeroIn = 1

; Set the options to be passed to the 0in tools.

; Default value set to "". Please set it to appropriate options needed.

; VcomZeroInOptions = ""

; Turn off code coverage in VHDL subprograms. Default is on.

; CoverageNoSub = 0

; Automatically exclude VHDL case statement default branches.

; Default is to not exclude.

; CoverExcludeDefault = 1

; Turn on code coverage in VHDL generate blocks. Default is off.

; CoverGenerate = 1

; Use this directory for compiler temporary files instead of "work/_temp"

; CompilerTempDir = /tmp

[vlog]

; Turn off inclusion of debugging info within design units.

; Default is to include debugging info.

; NoDebug = 1

; Turn on `protect compiler directive processing.

; Default is to ignore `protect directives.

; Protect = 1

; Turn off "Loading..." messages. Default is messages on.

; Quiet = 1

; Turn on Verilog hazard checking (order-dependent accessing of global vars).

; Default is off.

; Hazard = 1

; Turn on converting regular Verilog identifiers to uppercase. Allows case

; insensitivity for module names. Default is no conversion.

; UpCase = 1

; Activate optimizations on expressions that do not involve signals,

; waits, or function/procedure/task invocations. Default is off.

; ScalarOpts = 1

; Turns on lint-style checking.

; Show_Lint = 1

; Show source line containing error. Default is off.

; Show_source = 1

; Turn on bad option warning. Default is off.

; Show_BadOptionWarning = 1

; Revert back to IEEE 1364-1995 syntax, default is 0 (off).

vlog95compat = 0

; Turn off PSL warning messages. Default is to show warnings.

; Show_PslChecksWarnings = 0

; Enable parsing of embedded PSL assertions. Default is enabled.

; EmbeddedPsl = 0

; Set the threshold for automatically identifying sparse Verilog memories.

; A memory with depth equal to or more than the sparse memory threshold gets

; marked as sparse automatically, unless specified otherwise in source code.

; The default is 0 (i.e. no memory is automatically given sparse status)

; SparseMemThreshold = 1048576

; Set the maximum number of iterations permitted for a generate loop.

; Restricting this permits the implementation to recognize infinite

; generate loops.

; GenerateLoopIterationMax = 100000

; Set the maximum depth permitted for a recursive generate instantiation.

; Restricting this permits the implementation to recognize infinite

; recursions.

; GenerateRecursionDepthMax = 200

; Run the 0in tools from within the simulator.

; Default value set to 0. Please set it to 1 to invoke 0in.

; VlogZeroIn = 1

; Set the options to be passed to the 0in tools.

; Default value set to "". Please set it to appropriate options needed.

; VlogZeroInOptions = ""

; Run the 0in tools from within the simulator.

; Default value set to 0. Please set it to 1 to invoke 0in.

; VoptZeroIn = 1

; Set the options to be passed to the 0in tools.

; Default value set to "". Please set it to appropriate options needed.

; VoptZeroInOptions = ""

; Set the option to treat all files specified in a vlog invocation as a

; single compilation unit. The default value is set to 0 which will treat

; each file as a separate compilation unit as specified in the P1800 draft standard.

; MultiFileCompilationUnit = 1

; Automatically exclude Verilog case statement default branches.

; Default is to not exclude.

; CoverExcludeDefault = 1

; Turn on code coverage in VLOG generate blocks. Default is off.

; CoverGenerate = 1

; Specify the override for the default value of "cross_num_print_missing"

; option for the Cross in Covergroups. If not specified then LRM default

; value of 0 (zero) is used. This is a compile time option.

; SVCrossNumPrintMissingDefault = 0

; Setting following to 1 would cause creation of variables which

; would represent the value of Coverpoint expressions. This is used

; in conjunction with "SVCoverpointExprVariablePrefix" option

; in the modelsim.ini

; EnableSVCoverpointExprVariable = 0

; Specify the override for the prefix used in forming the variable names

; which represent the Coverpoint expressions. This is used in conjunction with

; "EnableSVCoverpointExprVariable" option of the modelsim.ini

; The default prefix is "expr".

; The variable name is

;    variable name => _

; SVCoverpointExprVariablePrefix = expr

; Override for the default value of the SystemVerilog covergroup,

; coverpoint, and cross option.goal (defined to be 100 in the LRM).

; NOTE: It does not override specific assignments in SystemVerilog

; source code. NOTE: The modelsim.ini variable "SVCovergroupGoal"

; can override this value.

; SVCovergroupGoalDefault = 100

; Override for the default value of the SystemVerilog covergroup,

; coverpoint, and cross type_option.goal (defined to be 100 in the LRM)

; NOTE: It does not override specific assignments in SystemVerilog

; source code. NOTE: The modelsim.ini variable "SVCovergroupTypeGoal"

; can override this value.

; SVCovergroupTypeGoalDefault = 100

; Specify the override for the default value of "strobe" option for the

; Covergroup Type. This is a compile time option which forces "strobe" to

; a user specified default value and supersedes SystemVerilog specified

; default value of '0'(zero). NOTE: This can be overriden by a runtime

; modelsim.ini variable "SVCovergroupStrobeDefault".

; SVCovergroupStrobeDefault = 0

[sccom]

; Enable use of SCV include files and library.  Default is off.

; UseScv = 1

; Add C++ compiler options to the sccom command line by using this variable.

; CppOptions = -g

; Use custom C++ compiler located at this path rather than the default path.

; The path should point directly at a compiler executable.

; CppPath = /usr/bin/g++

; Enable verbose messages from sccom.  Default is off.

; SccomVerbose = 1

; sccom logfile.  Default is no logfile.

; SccomLogfile = sccom.log

; Enable use of SC_MS include files and library.  Default is off.

; UseScMs = 1

[vsim]

; vopt flow

; Set to turn on automatic optimization of a design.

; Default is on

VoptFlow = 0

; vopt automatic SDF

; If automatic design optimization is on, enables automatic compilation

; of SDF files.

; Default is on, uncomment to turn off.

; VoptAutoSDFCompile = 0

; Simulator resolution

; Set to fs, ps, ns, us, ms, or sec with optional prefix of 1, 10, or 100.

Resolution = 1 ps

; User time unit for run commands

; Set to default, fs, ps, ns, us, ms, or sec. The default is to use the

; unit specified for Resolution. For example, if Resolution is 100ps,

; then UserTimeUnit defaults to ps.

; Should generally be set to default.

UserTimeUnit = ps

; Default run length

RunLength = 1000 ns

; Maximum iterations that can be run without advancing simulation time

IterationLimit = 5000

; Control PSL and Verilog Assume directives during simulation

; Set SimulateAssumeDirectives = 0 to disable assume being simulated as asserts

; Set SimulateAssumeDirectives = 1 to enable assume simulation as asserts

; SimulateAssumeDirectives = 1

; Control the simulation of PSL and SVA

; These switches can be overridden by the vsim command line switches:

;    -psl, -nopsl, -sva, -nosva.

; Set SimulatePSL = 0 to disable PSL simulation

; Set SimulatePSL = 1 to enable PSL simulation (default)

; SimulatePSL = 1

; Set SimulateSVA = 0 to disable SVA simulation

; Set SimulateSVA = 1 to enable concurrent SVA simulation (default)

; SimulateSVA = 1

; Directives to license manager can be set either as single value or as

; space separated multi-values:

; vhdl          Immediately reserve a VHDL license

; vlog          Immediately reserve a Verilog license

; plus          Immediately reserve a VHDL and Verilog license

; nomgc         Do not look for Mentor Graphics Licenses

; nomti         Do not look for Model Technology Licenses

; noqueue       Do not wait in the license queue when a license is not available

; viewsim       Try for viewer license but accept simulator license(s) instead

;               of queuing for viewer license (PE ONLY)

; noviewer      Disable checkout of msimviewer and vsim-viewer license

;               features (PE ONLY)

; noslvhdl      Disable checkout of qhsimvh and vsim license features

; noslvlog      Disable checkout of qhsimvl and vsimvlog license features

; nomix         Disable checkout of msimhdlmix and hdlmix license features

; nolnl         Disable checkout of msimhdlsim and hdlsim license features

; mixedonly     Disable checkout of qhsimvh,qhsimvl,vsim,vsimvlog license

;               features

; lnlonly       Disable checkout of qhsimvh,qhsimvl,vsim,vsimvlog,msimhdlmix,

;               hdlmix license features

; Single value:

; License = plus

; Multi-value:

; License = noqueue plus

; Stop the simulator after a VHDL/Verilog immediate assertion message

; 0 = Note  1 = Warning  2 = Error  3 = Failure  4 = Fatal

BreakOnAssertion = 2

; VHDL assertion Message Format

; %S - Severity Level

; %R - Report Message

; %T - Time of assertion

; %D - Delta

; %I - Instance or Region pathname (if available)

; %i - Instance pathname with process

; %O - Process name

; %K - Kind of object path is to return: Instance, Signal, Process or Unknown

; %P - Instance or Region path without leaf process

; %F - File

; %L - Line number of assertion or, if assertion is in a subprogram, line

;      from which the call is made

; %% - Print '%' character

; If specific format for assertion level is defined, use its format.

; If specific format is not defined for assertion level:

; - and if failure occurs during elaboration, use AssertionFormatBreakLine;

; - and if assertion triggers a breakpoint (controlled by BreakOnAssertion

;   level), use AssertionFormatBreak;

; - otherwise, use AssertionFormat.

; AssertionFormatBreakLine = "** %S: %R\n   Time: %T  Iteration: %D  %K: %i File: %F Line: %L\n"

; AssertionFormatBreak     = "** %S: %R\n   Time: %T  Iteration: %D  %K: %i File: %F\n"

; AssertionFormat          = "** %S: %R\n   Time: %T  Iteration: %D%I\n"

; AssertionFormatNote      = "** %S: %R\n   Time: %T  Iteration: %D%I\n"

; AssertionFormatWarning   = "** %S: %R\n   Time: %T  Iteration: %D%I\n"

; AssertionFormatError     = "** %S: %R\n   Time: %T  Iteration: %D  %K: %i File: %F\n"

; AssertionFormatFail      = "** %S: %R\n   Time: %T  Iteration: %D  %K: %i File: %F\n"

; AssertionFormatFatal     = "** %S: %R\n   Time: %T  Iteration: %D  %K: %i File: %F\n"

; Assertion File - alternate file for storing VHDL/PSL/Verilog assertion messages

; AssertFile = assert.log

; Simulation Breakpoint messages

; This flag controls the display of function names when reporting the location

; where the simulator stops do to a breakpoint or fatal error.

; Example w/function name:  # Break in Process ctr at counter.vhd line 44

; Example wo/function name: # Break at counter.vhd line 44

ShowFunctions = 1

; Default radix for all windows and commands.

; Set to symbolic, ascii, binary, octal, decimal, hex, unsigned

DefaultRadix = symbolic

; VSIM Startup command

; Startup = do startup.do

; File for saving command transcript

TranscriptFile = transcript

; File for saving command history

; CommandHistory = cmdhist.log

; Specify whether paths in simulator commands should be described

; in VHDL or Verilog format.

; For VHDL, PathSeparator = /

; For Verilog, PathSeparator = .

; Must not be the same character as DatasetSeparator.

PathSeparator = /

; Specify the dataset separator for fully rooted contexts.

; The default is ':'. For example: sim:/top

; Must not be the same character as PathSeparator.

DatasetSeparator = :

; Specify a unique path separator for the Signal Spy set of functions.

; The default will be to use the PathSeparator variable.

; Must not be the same character as DatasetSeparator.

; SignalSpyPathSeparator = /

; Disable VHDL assertion messages

; IgnoreNote = 1

; IgnoreWarning = 1

; IgnoreError = 1

; IgnoreFailure = 1

; Disable System Verilog assertion messages

; Info and Warning are disabled by default

; IgnoreSVAInfo = 0

; IgnoreSVAWarning = 0

; IgnoreSVAError = 1

; IgnoreSVAFatal = 1

; Default force kind. May be freeze, drive, deposit, or default

; or in other terms, fixed, wired, or charged.

; A value of "default" will use the signal kind to determine the

; force kind, drive for resolved signals, freeze for unresolved signals

; DefaultForceKind = freeze

; If zero, open files when elaborated; otherwise, open files on

; first read or write.  Default is 0.

; DelayFileOpen = 1

; Control VHDL files opened for write.

;   0 = Buffered, 1 = Unbuffered

UnbufferedOutput = 0

; Control the number of VHDL files open concurrently.

; This number should always be less than the current ulimit

; setting for max file descriptors.

;   0 = unlimited

ConcurrentFileLimit = 40

; Control the number of hierarchical regions displayed as

; part of a signal name shown in the Wave window.

; A value of zero tells VSIM to display the full name.

; The default is 0.

; WaveSignalNameWidth = 0

; Turn off warnings when changing VHDL constants and generics

; Default is 1 to generate warning messages

; WarnConstantChange = 0

; Turn off warnings from the std_logic_arith, std_logic_unsigned

; and std_logic_signed packages.

; StdArithNoWarnings = 1

; Turn off warnings from the IEEE numeric_std and numeric_bit packages.

; NumericStdNoWarnings = 1

; Control the format of the (VHDL) FOR generate statement label

; for each iteration.  Do not quote it.

; The format string here must contain the conversion codes %s and %d,

; in that order, and no other conversion codes.  The %s represents

; the generate_label; the %d represents the generate parameter value

; at a particular generate iteration (this is the position number if

; the generate parameter is of an enumeration type).  Embedded whitespace

; is allowed (but discouraged); leading and trailing whitespace is ignored.

; Application of the format must result in a unique scope name over all

; such names in the design so that name lookup can function properly.

; GenerateFormat = %s__%d

; Specify whether checkpoint files should be compressed.

; The default is 1 (compressed).

; CheckpointCompressMode = 0

; Specify whether to enable SystemVerilog DPI out-of-the-blue call.

; Out-of-the-blue call refers to a SystemVerilog export function call

; directly from a C function that don't have the proper context setup

; as done in DPI-C import C functions. When this is enabled, one can

; call a DPI export function (but not task) from any C code.

; The default is 0 (disabled).

; DpiOutOfTheBlue = 1

; List of dynamically loaded objects for Verilog PLI applications

; Veriuser = veriuser.sl

; Specify default options for the restart command. Options can be one

; or more of: -force -nobreakpoint -nolist -nolog -nowave -noassertions

; DefaultRestartOptions = -force

; HP-UX 10.20 ONLY - Enable memory locking to speed up large designs

; (> 500 megabyte memory footprint). Default is disabled.

; Specify number of megabytes to lock.

; LockedMemory = 1000

; HP-UX 11.00 ONLY - Use /usr/lib/libCsup_v2.sl for shared object loading.

; This is necessary when C++ files have been compiled with aCC's -AA option.

; The default behavior is to use /usr/lib/libCsup.sl.

; UseCsupV2 = 1

; Turn on (1) or off (0) WLF file compression.

; The default is 1 (compress WLF file).

; WLFCompress = 0

; Specify whether to save all design hierarchy (1) in the WLF file

; or only regions containing logged signals (0).

; The default is 0 (save only regions with logged signals).

; WLFSaveAllRegions = 1

; WLF file time limit.  Limit WLF file by time, as closely as possible,

; to the specified amount of simulation time.  When the limit is exceeded

; the earliest times get truncated from the file.

; If both time and size limits are specified the most restrictive is used.

; UserTimeUnits are used if time units are not specified.

; The default is 0 (no limit).  Example: WLFTimeLimit = {100 ms}

; WLFTimeLimit = 0

; WLF file size limit.  Limit WLF file size, as closely as possible,

; to the specified number of megabytes.  If both time and size limits

; are specified then the most restrictive is used.

; The default is 0 (no limit).

; WLFSizeLimit = 1000

; Specify whether or not a WLF file should be deleted when the

; simulation ends.  A value of 1 will cause the WLF file to be deleted.

; The default is 0 (do not delete WLF file when simulation ends).

; WLFDeleteOnQuit = 1

; Specify whether or not a WLF file should be optimized during

; simulation.  If set to 0, the WLF file will not be optimized.

; The default is 1, optimize the WLF file.

; WLFOptimize = 0

; Specify the name of the WLF file.

; The default is vsim.wlf

; WLFFilename = vsim.wlf

; WLF reader cache size limit.  Specifies the internal WLF file cache size,

; in megabytes, for EACH open WLF file.  A value of 0 turns off the

; WLF cache.

; The default setting is enabled to 256M per open WLF file.

; WLFCacheSize = 1000

; Specify the WLF file event collapse mode.

; 0 = Preserve all events and event order. (same as -wlfnocollapse)

; 1 = Only record values of logged objects at the end of a simulator iteration.

;     (same as -wlfcollapsedelta)

; 2 = Only record values of logged objects at the end of a simulator time step.

;     (same as -wlfcollapsetime)

; The default is 1.

; WLFCollapseMode = 0

; Turn on/off undebuggable SystemC type warnings. Default is on.

; ShowUndebuggableScTypeWarning = 0

; Turn on/off unassociated SystemC name warnings. Default is off.

; ShowUnassociatedScNameWarning = 1

; Set SystemC default time unit.

; Set to fs, ps, ns, us, ms, or sec with optional

; prefix of 1, 10, or 100.  The default is 1 ns.

; The ScTimeUnit value is honored if it is coarser than Resolution.

; If ScTimeUnit is finer than Resolution, it is set to the value

; of Resolution. For example, if Resolution is 100ps and ScTimeUnit is ns,

; then the default time unit will be 1 ns.  However if Resolution

; is 10 ns and ScTimeUnit is ns, then the default time unit will be 10 ns.

ScTimeUnit = ns

; Set the SCV relationship name that will be used to identify phase

; relations.  If the name given to a transactor relation matches this

; name, the transactions involved will be treated as phase transactions

ScvPhaseRelationName = mti_phase

; Customize the vsim kernel shutdown behavior at the end of the simulation.

; Some common causes of the end of simulation are $finish (implicit or explicit),

; sc_stop(), tf_dofinish(), and assertion failures.

; This should be set to "ask", "exit", or "stop". The default is "ask".

; "ask"  -- In batch mode, the vsim kernel will abruptly exit.

;           In GUI mode, a dialog box will pop up and ask for user confirmation

;           whether or not to quit the simulation.

; "stop" -- Cause the simulation to stay loaded in memory. This can make some

;           post-simulation tasks easier.

; "exit" -- The simulation will abruptly exit without asking for any confirmation.

; Note: these ini variables can be overriden by the vsim command

;       line switch "-onfinish ".

OnFinish = ask

; Print "simstats" result at the end of simulation before shutdown.

; If this is enabled, the simstats result will be printed out before shutdown.

; The default is off.

; PrintSimStats = 1

; Run simulator in assertion debug mode. Default is off.

; AssertionDebug = 1

; Turn on/off PSL/SVA concurrent assertion pass enable. Default is on.

; AssertionPassEnable = 0

; Turn on/off PSL/SVA concurrent assertion fail enable. Default is on.

; AssertionFailEnable = 0

; Set PSL/SVA concurrent assertion pass limit. Default is -1.

; Any positive integer, -1 for infinity.

; AssertionPassLimit = 1

; Set PSL/SVA concurrent assertion fail limit. Default is -1.

; Any positive integer, -1 for infinity.

; AssertionFailLimit = 1

; Turn on/off PSL concurrent assertion pass log. Default is off.

; The flag does not affect SVA

; AssertionPassLog = 1

; Turn on/off PSL concurrent assertion fail log. Default is on.

; The flag does not affect SVA

; AssertionFailLog = 0

; Set action type for PSL/SVA concurrent assertion fail action. Default is continue.

; 0 = Continue  1 = Break  2 = Exit

; AssertionFailAction = 1

; Turn on/off code coverage

; CodeCoverage = 0

; Count all code coverage condition and expression truth table rows that match.

; CoverCountAll = 1

; Turn on/off all PSL/SVA cover directive enables.  Default is on.

; CoverEnable = 0

; Turn on/off PSL/SVA cover log.  Default is off.

; CoverLog = 1

; Set "at_least" value for all PSL/SVA cover directives.  Default is 1.

; CoverAtLeast = 2

; Set "limit" value for all PSL/SVA cover directives.  Default is -1.

; Any positive integer, -1 for infinity.

; CoverLimit = 1

; Specify the coverage database filename.  Default is "" (i.e. database is NOT automatically saved on close).

; UCDBFilename = vsim.ucdb

; Specify the maximum limit for the number of Cross (bin) products reported

; in XML and UCDB report against a Cross. A warning is issued if the limit

; is crossed.

; MaxReportRhsSVCrossProducts = 1000

; Specify the override for the "auto_bin_max" option for the Covergroups.

; If not specified then value from Covergroup "option" is used.

; SVCoverpointAutoBinMax = 64

; Specify the override for the value of "cross_num_print_missing"

; option for the Cross in Covergroups. If not specified then value

; specified in the "option.cross_num_print_missing" is used. This

; is a runtime option. NOTE: This overrides any "cross_num_print_missing"

; value specified by user in source file and any SVCrossNumPrintMissingDefault

; specified in modelsim.ini.

; SVCrossNumPrintMissing = 0

; Specify the override for the value of "strobe" option for the

; Covergroup Type. If not specified then value in "type_option.strobe"

; will be used. This is runtime option which forces "strobe" to

; user specified value and supersedes user specified values in the

; SystemVerilog Code. NOTE: This also overrides the compile time

; default value override specified using "SVCovergroupStrobeDefault"

; SVCovergroupStrobe = 0

; Override for explicit assignments in source code to "option.goal" of

; SystemVerilog covergroup, coverpoint, and cross. It also overrides the

; default value of "option.goal" (defined to be 100 in the SystemVerilog

; LRM) and the value of modelsim.ini variable "SVCovergroupGoalDefault".

; SVCovergroupGoal = 100

; Override for explicit assignments in source code to "type_option.goal" of

; SystemVerilog covergroup, coverpoint, and cross. It also overrides the

; default value of "type_option.goal" (defined to be 100 in the SystemVerilog

; LRM) and the value of modelsim.ini variable "SVCovergroupTypeGoalDefault".

; SVCovergroupTypeGoal = 100

; Specify the maximum number of Coverpoint bins in whole design for

; all Covergroups.

; MaxSVCoverpointBinsDesign = 2147483648

; Specify maximum number of Coverpoint bins in any instance of a Covergroup

; MaxSVCoverpointBinsInst = 2147483648

; Specify the maximum number of Cross bins in whole design for

; all Covergroups.

; MaxSVCrossBinsDesign = 2147483648

; Specify maximum number of Cross bins in any instance of a Covergroup

; MaxSVCrossBinsInst = 2147483648

; Set weight for all PSL/SVA cover directives.  Default is 1.

; CoverWeight = 2

; Check vsim plusargs.  Default is 0 (off).

; 0 = Don't check plusargs

; 1 = Warning on unrecognized plusarg

; 2 = Error and exit on unrecognized plusarg

; CheckPlusargs = 1

; Load the specified shared objects with the RTLD_GLOBAL flag.

; This gives global visibility to all symbols in the shared objects,

; meaning that subsequently loaded shared objects can bind to symbols

; in the global shared objects.  The list of shared objects should

; be whitespace delimited.  This option is not supported on the

; Windows or AIX platforms.

; GlobalSharedObjectList = example1.so example2.so example3.so

; Run the 0in tools from within the simulator.

; Default value set to 0. Please set it to 1 to invoke 0in.

; VsimZeroIn = 1

; Set the options to be passed to the 0in tools.

; Default value set to "". Please set it to appropriate options needed.

; VsimZeroInOptions = ""

; Initial seed for the Random Number Generator (RNG) of the root thread (SystemVerilog).

; Sv_Seed = 0

; Maximum size of dynamic arrays that are resized during randomize().

; The default is 1000. A value of 0 indicates no limit.

; SolveArrayResizeMax = 1000

; Error message severity when randomize() failure is detected (SystemVerilog).

; The default is 0 (no error).

; 0 = No error  1 = Warning  2 = Error  3 = Failure  4 = Fatal

; SolveFailSeverity = 0

; Enable/disable debug information for randomize() failures (SystemVerilog).

; The default is 0 (disabled). Set to 1 to enable.

; SolveFailDebug = 0

; When SolveFailDebug is enabled, this value specifies the maximum number of

; constraint subsets that will be tested for conflicts.

; The default is 0 (no limit).

; SolveFailDebugLimit = 0

; When SolveFailDebug is enabled, this value specifies the maximum size of

; constraint subsets that will be tested for conflicts.

; The default value is 0 (no limit).

; SolveFailDebugMaxSet = 0

; Maximum size of the solution graph that may be generated during randomize().

; This value can be used to force randomize() to abort if the complexity of

; the constraint scenario (both in memory and time spent during evaluation)

; exceeds the specified limit. This value is specified in 1000s of nodes.

; The default is 10000. A value of 0 indicates no limit.

; SolveGraphMaxSize = 10000

; Use SolveFlags to specify options that will guide the behavior of the

; constraint solver. These options may improve the performance of the

; constraint solver for some testcases, and decrease the performance of

; the constraint solver for others.

; The default value is "" (no options).

;

; Valid flags are:

;    i = disable bit interleaving for >, >=, <, <= constraints

;    r = reverse bit interleaving

;

; SolveFlags =

; Specify random sequence compatiblity with a prior letter release. This

; option is used to get the same random sequences during simulation as

; as a prior letter release. Only prior letter releases (of the current

; number release) are allowed.

; Note: To achieve the same random sequences, solver optimizations and/or

; bug fixes introduced since the specified release may be disabled -

; yielding the performance / behavior of the prior release.

; Default value set to "" (random compatibility not required).

; SolveRev =

; Environment variable expansion of command line arguments has been depricated

; in favor shell level expansion.  Universal environment variable expansion

; inside -f files is support and continued support for MGC Location Maps provide

; alternative methods for handling flexible pathnames.

; The following line may be uncommented and the value set to 1 to re-enable this

; deprecated behavior.  The default value is 0.

; DeprecatedEnvironmentVariableExpansion = 0

; Retroactive Recording uses a limited number of private data channels in the WLF

; file.  Too many channels degrade WLF performance.  If the limit is reached,

; simulation ends with a fatal error.  You may change this limit as needed, but be

; aware of the implications of too many channels.  The value must be an integer

; greater than or equal to zero, where zero disables all retroactive recording.

; RetroChannelLimit = 20

; Options to give vopt when code coverage is turned on.

; Default is "+acc=lprnb -opt=-merge -opt=-suppressAlways"

; VoptCoverageOptions = +acc=lprnb -opt=-merge -opt=-suppressAlways

; Turn on/off collapsing of bus ports in VCD dumpports output

DumpportsCollapse = 0

[lmc]

; The simulator's interface to Logic Modeling's SmartModel SWIFT software

libsm = $MODEL_TECH/libsm.sl

; The simulator's interface to Logic Modeling's SmartModel SWIFT software (Windows NT)

; libsm = $MODEL_TECH/libsm.dll

;  Logic Modeling's SmartModel SWIFT software (HP 9000 Series 700)

; libswift = $LMC_HOME/lib/hp700.lib/libswift.sl

;  Logic Modeling's SmartModel SWIFT software (IBM RISC System/6000)

; libswift = $LMC_HOME/lib/ibmrs.lib/swift.o

;  Logic Modeling's SmartModel SWIFT software (Sun4 Solaris)

; libswift = $LMC_HOME/lib/sun4Solaris.lib/libswift.so

;  Logic Modeling's SmartModel SWIFT software (Windows NT)

; libswift = $LMC_HOME/lib/pcnt.lib/libswift.dll

;  Logic Modeling's SmartModel SWIFT software (Linux)

; libswift = $LMC_HOME/lib/x86_linux.lib/libswift.so

; The simulator's interface to Logic Modeling's hardware modeler SFI software

libhm = $MODEL_TECH/libhm.sl

; The simulator's interface to Logic Modeling's hardware modeler SFI software (Windows NT)

; libhm = $MODEL_TECH/libhm.dll

;  Logic Modeling's hardware modeler SFI software (HP 9000 Series 700)

; libsfi = /lib/hp700/libsfi.sl

;  Logic Modeling's hardware modeler SFI software (IBM RISC System/6000)

; libsfi = /lib/rs6000/libsfi.a

;  Logic Modeling's hardware modeler SFI software (Sun4 Solaris)

; libsfi = /lib/sun4.solaris/libsfi.so

;  Logic Modeling's hardware modeler SFI software (Windows NT)

; libsfi = /lib/pcnt/lm_sfi.dll

;  Logic Modeling's hardware modeler SFI software (Linux)

; libsfi = /lib/linux/libsfi.so

[msg_system]

; Change a message severity or suppress a message.

; The format is:  = [,...]

; Examples:

;   note = 3009

;   warning = 3033

;   error = 3010,3016

;   fatal = 3016,3033

;   suppress = 3009,3016,3043

; The command verror  can be used to get the complete

; description of a message.

; Control transcripting of elaboration/runtime messages.

; The default is to have messages appear in the transcript and

; recorded in the wlf file (messages that are recorded in the

; wlf file can be viewed in the MsgViewer).  The other settings

; are to send messages only to the transcript or only to the

; wlf file.  The valid values are

;    both  {default}

;    tran  {transcript only}

;    wlf   {wlf file only}

; msgmode = both