Subversion Repositories iicmb

--==============================================================================

--                                                                             |

--    Project: IIC Multiple Bus Controller (IICMB)                             |

--                                                                             |

--    Module:  Top level of IICMB controller with sequencer.                   |

--    Version:                                                                 |

--             1.0,   April 29, 2016                                           |

--                                                                             |

--    Author:  Sergey Shuvalkin, (sshuv2@opencores.org)                        |

--                                                                             |

--==============================================================================

--==============================================================================

-- Copyright (c) 2016, Sergey Shuvalkin                                        |

-- All rights reserved.                                                        |

--                                                                             |

-- Redistribution and use in source and binary forms, with or without          |

-- modification, are permitted provided that the following conditions are met: |

--                                                                             |

-- 1. Redistributions of source code must retain the above copyright notice,   |

--    this list of conditions and the following disclaimer.                    |

-- 2. Redistributions in binary form must reproduce the above copyright        |

--    notice, this list of conditions and the following disclaimer in the      |

--    documentation and/or other materials provided with the distribution.     |

--                                                                             |

-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |

-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE   |

-- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  |

-- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE    |

-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR         |

-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF        |

-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS    |

-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN     |

-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)     |

-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE  |

-- POSSIBILITY OF SUCH DAMAGE.                                                 |

--==============================================================================

library ieee;

use ieee.std_logic_1164.all;

use work.iicmb_pkg.all;

--==============================================================================

entity iicmb_m_sq is

  generic

  (

    ------------------------------------

    g_bus_num     :       positive range 1 to 16 := 1;          -- Number of separate I2C buses

    g_f_clk       :       real                   := 100000.0;   -- Frequency of system clock 'clk' (in kHz)

    g_f_scl_0     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #0 (in kHz)

    g_f_scl_1     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #1 (in kHz)

    g_f_scl_2     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #2 (in kHz)

    g_f_scl_3     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #3 (in kHz)

    g_f_scl_4     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #4 (in kHz)

    g_f_scl_5     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #5 (in kHz)

    g_f_scl_6     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #6 (in kHz)

    g_f_scl_7     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #7 (in kHz)

    g_f_scl_8     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #8 (in kHz)

    g_f_scl_9     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #9 (in kHz)

    g_f_scl_a     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #10 (in kHz)

    g_f_scl_b     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #11 (in kHz)

    g_f_scl_c     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #12 (in kHz)

    g_f_scl_d     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #13 (in kHz)

    g_f_scl_e     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #14 (in kHz)

    g_f_scl_f     :       real                   :=    100.0;   -- Frequency of 'SCL' clock of I2C bus #15 (in kHz)

    g_cmd         :       seq_cmd_type_array     := c_empty_array -- Sequence of commands (supported: WAIT, SET_BUS and WRITE_BYTE)

    ------------------------------------

  );

  port

  (

    ------------------------------------

    clk           : in    std_logic;                            -- Clock

    s_rst         : in    std_logic;                            -- Synchronous reset (active high)

    ------------------------------------

    ------------------------------------

    cs_start      : in    std_logic;                            -- Start executing command sequence

    cs_busy       :   out std_logic;                            -- Command sequence is being executed

    cs_status     :   out std_logic_vector(2 downto 0);         -- Execution status

    ------------------------------------

    ------------------------------------

    -- I2C interfaces:

    scl_i         : in    std_logic_vector(0 to g_bus_num - 1); -- I2C Clock inputs

    sda_i         : in    std_logic_vector(0 to g_bus_num - 1); -- I2C Data inputs

    scl_o         :   out std_logic_vector(0 to g_bus_num - 1); -- I2C Clock outputs

    sda_o         :   out std_logic_vector(0 to g_bus_num - 1)  -- I2C Data outputs

    ------------------------------------

  );

end entity iicmb_m_sq;

--==============================================================================

--==============================================================================

architecture str of iicmb_m_sq is

  ------------------------------------------------------------------------------

  component sequencer is

    generic

    (

      g_cmd       :       seq_cmd_type_array := c_empty_array

    );

    port

    (

      clk         : in    std_logic;

      s_rst       : in    std_logic;

      cs_start    : in    std_logic;

      cs_busy     :   out std_logic;

      cs_status   :   out std_logic_vector(2 downto 0);

      busy        : in    std_logic;

      captured    : in    std_logic;

      bus_id      : in    std_logic_vector(3 downto 0);

      bit_state   : in    std_logic_vector(3 downto 0);

      byte_state  : in    std_logic_vector(3 downto 0);

      mcmd_wr     :   out std_logic;

      mcmd_id     :   out std_logic_vector(2 downto 0);

      mcmd_data   :   out std_logic_vector(7 downto 0);

      mrsp_wr     : in    std_logic;

      mrsp_id     : in    std_logic_vector(2 downto 0);

      mrsp_data   : in    std_logic_vector(7 downto 0)

    );

  end component sequencer;

  ------------------------------------------------------------------------------

  ------------------------------------------------------------------------------

  component iicmb_m is

    generic

    (

      g_bus_num   :       positive range 1 to 16 := 1;

      g_f_clk     :       real                   := 100000.0;

      g_f_scl_0   :       real                   :=    100.0;

      g_f_scl_1   :       real                   :=    100.0;

      g_f_scl_2   :       real                   :=    100.0;

      g_f_scl_3   :       real                   :=    100.0;

      g_f_scl_4   :       real                   :=    100.0;

      g_f_scl_5   :       real                   :=    100.0;

      g_f_scl_6   :       real                   :=    100.0;

      g_f_scl_7   :       real                   :=    100.0;

      g_f_scl_8   :       real                   :=    100.0;

      g_f_scl_9   :       real                   :=    100.0;

      g_f_scl_a   :       real                   :=    100.0;

      g_f_scl_b   :       real                   :=    100.0;

      g_f_scl_c   :       real                   :=    100.0;

      g_f_scl_d   :       real                   :=    100.0;

      g_f_scl_e   :       real                   :=    100.0;

      g_f_scl_f   :       real                   :=    100.0

    );

    port

    (

      clk         : in    std_logic;

      s_rst       : in    std_logic;

      busy        :   out std_logic;

      captured    :   out std_logic;

      bus_id      :   out std_logic_vector(3 downto 0);

      bit_state   :   out std_logic_vector(3 downto 0);

      byte_state  :   out std_logic_vector(3 downto 0);

      mcmd_wr     : in    std_logic;

      mcmd_id     : in    std_logic_vector(2 downto 0);

      mcmd_data   : in    std_logic_vector(7 downto 0);

      mrsp_wr     :   out std_logic;

      mrsp_id     :   out std_logic_vector(2 downto 0);

      mrsp_data   :   out std_logic_vector(7 downto 0);

      scl_i       : in    std_logic_vector(0 to g_bus_num - 1);

      sda_i       : in    std_logic_vector(0 to g_bus_num - 1);

      scl_o       :   out std_logic_vector(0 to g_bus_num - 1);

      sda_o       :   out std_logic_vector(0 to g_bus_num - 1)

    );

  end component iicmb_m;

  ------------------------------------------------------------------------------

  signal busy        : std_logic;

  signal captured    : std_logic;

  signal bus_id      : std_logic_vector( 3 downto 0);

  signal bit_state   : std_logic_vector( 3 downto 0);

  signal byte_state  : std_logic_vector( 3 downto 0);

  -- Signals of 'Generic Interface':

  -- Command:

  signal mcmd_wr     : std_logic;

  signal mcmd_id     : std_logic_vector( 2 downto 0);

  signal mcmd_data   : std_logic_vector( 7 downto 0);

  -- Response:

  signal mrsp_wr     : std_logic;

  signal mrsp_id     : std_logic_vector( 2 downto 0);

  signal mrsp_data   : std_logic_vector( 7 downto 0);

begin

  ------------------------------------------------------------------------------

  sequencer_inst0 : sequencer

    generic map

    (

      g_cmd       => g_cmd

    )

    port map

    (

      clk         => clk,

      s_rst       => s_rst,

      cs_start    => cs_start,

      cs_busy     => cs_busy,

      cs_status   => cs_status,

      busy        => busy,

      captured    => captured,

      bus_id      => bus_id,

      bit_state   => bit_state,

      byte_state  => byte_state,

      mcmd_wr     => mcmd_wr,

      mcmd_id     => mcmd_id,

      mcmd_data   => mcmd_data,

      mrsp_wr     => mrsp_wr,

      mrsp_id     => mrsp_id,

      mrsp_data   => mrsp_data

    );

  ------------------------------------------------------------------------------

  ------------------------------------------------------------------------------

  iicmb_m_inst0 : iicmb_m

    generic map

    (

      g_bus_num   => g_bus_num,

      g_f_clk     => g_f_clk,

      g_f_scl_0   => g_f_scl_0,

      g_f_scl_1   => g_f_scl_1,

      g_f_scl_2   => g_f_scl_2,

      g_f_scl_3   => g_f_scl_3,

      g_f_scl_4   => g_f_scl_4,

      g_f_scl_5   => g_f_scl_5,

      g_f_scl_6   => g_f_scl_6,

      g_f_scl_7   => g_f_scl_7,

      g_f_scl_8   => g_f_scl_8,

      g_f_scl_9   => g_f_scl_9,

      g_f_scl_a   => g_f_scl_a,

      g_f_scl_b   => g_f_scl_b,

      g_f_scl_c   => g_f_scl_c,

      g_f_scl_d   => g_f_scl_d,

      g_f_scl_e   => g_f_scl_e,

      g_f_scl_f   => g_f_scl_f

    )

    port map

    (

      clk         => clk,

      s_rst       => s_rst,

      busy        => busy,

      captured    => captured,

      bus_id      => bus_id,

      bit_state   => bit_state,

      byte_state  => byte_state,

      mcmd_wr     => mcmd_wr,

      mcmd_id     => mcmd_id,

      mcmd_data   => mcmd_data,

      mrsp_wr     => mrsp_wr,

      mrsp_id     => mrsp_id,

      mrsp_data   => mrsp_data,

      scl_i       => scl_i,

      sda_i       => sda_i,

      scl_o       => scl_o,

      sda_o       => sda_o

    );

  ------------------------------------------------------------------------------

end architecture str;

--==============================================================================