Subversion Repositories ion

--------------------------------------------------------------------------------

-- mips_tb_pkg.vhdl -- Functions and data for the simulation test benches.

--------------------------------------------------------------------------------

-- Most of this file deals with the 'simulation log': the CPU execution history

-- is logged to a text file for easy comparison to a similaro log written by the

-- software simulator. This is meant as a debugging tool and is explained to 

-- some detail in the project doc.

-- It is used as a verification tool at least while no better verification test

-- bench exists.

--------------------------------------------------------------------------------

-- FIXME Console logging code should be here too

--------------------------------------------------------------------------------

-- WARNING: 

-- This package contains arguably the worst code of the project; in order

-- to expedite things, a number of trial-and-error hacks have been performed on

-- the code below. Mostly, the adjustment of the displayed PC.

-- This is just the kind of hdl you don't want prospective employers to see :)

-- 

-- The problem is: each change in the CPU state is logged in a text line, in 

-- which the address of the instruction that caused the change is included. 

-- From outside the CPU it is not always trivial to find out what instruction

-- caused what change (pipeline delays, cache stalls, etc.). 

-- I think the logging rules should be pretty stable now but I might have to

-- tweak them again as the cache implementation changes. Eventually I aim to

-- make this code fully independent of the cache implementation; it should

-- only depend on the cpu. I will do this step by step, as I do all the rest.

--------------------------------------------------------------------------------

library ieee,modelsim_lib;

use ieee.std_logic_1164.all;

use ieee.std_logic_arith.all;

use ieee.std_logic_unsigned.all;

use work.mips_pkg.all;

use modelsim_lib.util.all;

use std.textio.all;

use work.txt_util.all;

package mips_tb_pkg is

type t_pc_queue is array(0 to 3) of t_word;

type t_log_info is record

    rbank :                 t_rbank;

    prev_rbank :            t_rbank;

    cp0_epc :               t_pc;

    prev_epc :              t_pc;

    pc_m :                  t_pc_queue;

    reg_hi, reg_lo :        t_word;

    prev_hi, prev_lo :      t_word;

    negate_reg_lo :         std_logic;

    mdiv_count_reg :        std_logic_vector(5 downto 0);

    prev_count_reg :        std_logic_vector(5 downto 0);

    data_rd_vma :           std_logic;

    code_rd_vma :           std_logic;

    data_byte_we :          std_logic_vector(3 downto 0);

    present_data_wr_addr :  t_pc;

    present_data_wr :       t_word;

    present_data_rd_addr :  t_word;

    present_code_rd_addr :  t_pc;

    pending_data_rd_addr :  t_word;

    pending_data_wr_addr :  t_word;

    pending_data_wr_pc :    t_word;

    pending_data_wr :       t_word;

    pending_data_wr_we :    std_logic_vector(3 downto 0);

    word_loaded :           t_word;

    mdiv_address :          t_word;

    mdiv_pending :          boolean;

    data_rd_address :       t_word;

    load :                  std_logic;

    read_pending :          boolean;

    write_pending :         boolean;

    -- Log trigger --------------------------------------------------

    -- Enable logging after fetching from a given address -----------

    log_trigger_address :   t_word;

    log_triggered :         boolean;

end record t_log_info;

procedure log_cpu_activity(

                signal clk :    in std_logic;

                signal reset :  in std_logic;

                signal done :   in std_logic;

                entity_name :   string;

                signal info :   inout t_log_info;

                signal_name :   string;

                trigger_addr :  in t_word;

                file l_file :   TEXT);

end package;

package body mips_tb_pkg is

procedure log_cpu_status(

                signal info :   inout t_log_info;

                file l_file :   TEXT) is

variable i : integer;

variable ri : std_logic_vector(7 downto 0);

variable full_pc, temp, temp2 : t_word;

variable k : integer := 2;

begin

    -- Trigger logging if the CPU fetches from trigger address

    if (info.log_trigger_address(31 downto 2) = info.present_code_rd_addr) and

       info.code_rd_vma='1' then

        info.log_triggered <= true;

        assert 1=0

        report "Log triggered by fetch from address 0x"& hstr(info.log_trigger_address)

        severity note;

    end if;

    -- This is the address of the opcode that triggered the changed we're

    -- about to log

    full_pc := info.pc_m(k);

    -- Log activity only at the 1st cycle of each instruction

    if info.code_rd_vma='1' then

        -- Log register changes -------------------------------------

        ri := X"00";

        for i in 0 to 31 loop

            if info.prev_rbank(i)/=info.rbank(i)

               and info.prev_rbank(i)(0)/='U' then

                if info.log_triggered then

                    print(l_file, "("& hstr(full_pc)& ") "&

                        "["& hstr(ri)& "]="& hstr(info.rbank(i)));

                end if;

            end if;

            ri := ri + 1;

        end loop;

        -- Log memory writes ----------------------------------------

        if info.write_pending then

            ri := X"0" & info.pending_data_wr_we;

            temp := info.pending_data_wr;

            if info.pending_data_wr_we(3)='0' then

                temp := temp and X"00ffffff";

            end if;

            if info.pending_data_wr_we(2)='0' then

                temp := temp and X"ff00ffff";

            end if;

            if info.pending_data_wr_we(1)='0' then

                temp := temp and X"ffff00ff";

            end if;

            if info.pending_data_wr_we(0)='0' then

                temp := temp and X"ffffff00";

            end if;

            if info.log_triggered then

                print(l_file, "("& hstr(info.pending_data_wr_pc) &") ["&

                    hstr(info.pending_data_wr_addr) &"] |"&

                    hstr(ri)& "|="&

                    hstr(temp)& " WR" );

            end if;

            info.write_pending <= false;

        end if;

        -- Log memory reads ------------------------------------------

        if info.read_pending and info.load='1' then

            if info.log_triggered then

                print(l_file, "("& hstr(info.pc_m(1)) &") ["&

                      hstr(info.pending_data_rd_addr) &"] <"&

                      "**"& ">="&

                      hstr(info.word_loaded)& " RD" ); -- FIXME

            end if;

            info.read_pending <= false;

        end if;

        -- Log aux register changes ---------------------------------

        if info.prev_lo /= info.reg_lo and info.prev_lo(0)/='U' then

            -- Adjust opcode PC when LO came from the mul module

            if info.mdiv_pending then

                temp2 := info.mdiv_address;

                info.mdiv_pending <= false;

            else

                temp2 := info.pc_m(k-1);

            end if;

            -- we're observing the value of reg_lo, but the mult core

            -- will output the negated value in some cases. We

            -- have to mimic that behavior.

            if info.negate_reg_lo='1' then

                -- negate reg_lo before displaying

                temp := not info.reg_lo;

                temp := temp + 1;

                if info.log_triggered then

                    print(l_file, "("& hstr(temp2)& ") [LO]="& hstr(temp));

                end if;

            else

                if info.log_triggered then

                    print(l_file, "("& hstr(temp2)& ") [LO]="& hstr(info.reg_lo));

                end if;

            end if;

        end if;

        if info.prev_hi /= info.reg_hi and info.prev_hi(0)/='U' then

            -- Adjust opcode PC when HI came from the mul module

            if info.mdiv_pending then

                temp2 := info.mdiv_address;

                info.mdiv_pending <= false;

            else

                temp2 := info.pc_m(k-1);

            end if;

            if info.log_triggered then

                print(l_file, "("& hstr(temp2)& ") [HI]="& hstr(info.reg_hi));

            end if;

        end if;

        if info.prev_epc /= info.cp0_epc and info.cp0_epc(31)/='U'  then

            temp := info.cp0_epc & "00";

            if info.log_triggered then

                print(l_file, "("& hstr(info.pc_m(k-1))& ") [EP]="& hstr(temp));

            end if;

            info.prev_epc <= info.cp0_epc;

        end if;

        -- Save present cycle info to compare the next cycle --------

        info.prev_rbank <= info.rbank;

        info.prev_hi <= info.reg_hi;

        info.prev_lo <= info.reg_lo;

        info.pc_m(3) <= info.pc_m(2);

        info.pc_m(2) <= info.pc_m(1);

        info.pc_m(1) <= info.pc_m(0);

        info.pc_m(0) <= info.present_code_rd_addr & "00";

    end if;

    if info.data_byte_we/="0000" then

        info.write_pending <= true;

        info.pending_data_wr_we <= info.data_byte_we;

        info.pending_data_wr_addr <= info.present_data_wr_addr & "00";

        info.pending_data_wr_pc <= info.pc_m(k-1);

        info.pending_data_wr <= info.present_data_wr;

    end if;

    if info.data_rd_vma='1' then

        info.read_pending <= true;

        info.pending_data_rd_addr <= info.present_data_rd_addr;

    end if;

    if info.mdiv_count_reg="100000" then

        info.mdiv_address <= info.pc_m(1);

        info.mdiv_pending <= true;

    end if;

    info.prev_count_reg <= info.mdiv_count_reg;

end procedure log_cpu_status;

procedure log_cpu_activity(

                signal clk :    in std_logic;

                signal reset :  in std_logic;

                signal done :   in std_logic;

                entity_name :   string;

                signal info :   inout t_log_info;

                signal_name :   string;

                trigger_addr :  in t_word;

                file l_file :   TEXT) is

begin

    init_signal_spy("/"&entity_name&"/p1_rbank", signal_name&".rbank", 0, -1);

    init_signal_spy("/"&entity_name&"/code_rd_addr", signal_name&".present_code_rd_addr", 0, -1);

    init_signal_spy("/"&entity_name&"/mult_div/upper_reg", signal_name&".reg_hi", 0, -1);

    init_signal_spy("/"&entity_name&"/mult_div/lower_reg", signal_name&".reg_lo", 0, -1);

    init_signal_spy("/"&entity_name&"/mult_div/negate_reg", signal_name&".negate_reg_lo", 0, -1);

    init_signal_spy("/"&entity_name&"/mult_div/count_reg", signal_name&".mdiv_count_reg", 0, -1);

    init_signal_spy("/"&entity_name&"/cp0_epc", signal_name&".cp0_epc", 0, -1);

    init_signal_spy("/"&entity_name&"/data_rd_vma", signal_name&".data_rd_vma", 0, -1);

    init_signal_spy("/"&entity_name&"/code_rd_vma", signal_name&".code_rd_vma", 0, -1);

    init_signal_spy("/"&entity_name&"/p2_do_load", signal_name&".load", 0, -1);

    init_signal_spy("/"&entity_name&"/data_wr_addr", signal_name&".present_data_wr_addr", 0, -1);

    init_signal_spy("/"&entity_name&"/data_wr", signal_name&".present_data_wr", 0, -1);

    init_signal_spy("/"&entity_name&"/byte_we", signal_name&".data_byte_we", 0, -1);

    init_signal_spy("/"&entity_name&"/p2_data_word_rd", signal_name&".word_loaded", 0, -1);

    init_signal_spy("/"&entity_name&"/data_rd_addr", signal_name&".present_data_rd_addr", 0, -1);

    while done='0' loop

        wait until clk'event and clk='1';

        if reset='1' then

            -- FIXME should use real reset vector here

            info.pc_m <= (others => X"00000000");

            -- By default logging is DISABLED by triggering with an impossible

            -- fetch address. Logging must be enabled from outside by 

            -- setting log_trigger_address to a suitable value.

            info.log_trigger_address <= trigger_addr;

            info.log_triggered <= false;

        else

            log_cpu_status(info, l_file);

        end if;

    end loop;

end procedure log_cpu_activity;

end package body;