Subversion Repositories iota_pow_vhdl

-- megafunction wizard: %ALTPLL%

-- GENERATION: STANDARD

-- VERSION: WM1.0

-- MODULE: altpll 

-- ============================================================

-- File Name: pll.vhd

-- Megafunction Name(s):

--                      altpll

--

-- Simulation Library Files(s):

--                      altera_mf

-- ============================================================

-- ************************************************************

-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!

--

-- 17.1.0 Build 590 10/25/2017 SJ Lite Edition

-- ************************************************************

--Copyright (C) 2017  Intel Corporation. All rights reserved.

--Your use of Intel Corporation's design tools, logic functions 

--and other software and tools, and its AMPP partner logic 

--functions, and any output files from any of the foregoing 

--(including device programming or simulation files), and any 

--associated documentation or information are expressly subject 

--to the terms and conditions of the Intel Program License 

--Subscription Agreement, the Intel Quartus Prime License Agreement,

--the Intel FPGA IP License Agreement, or other applicable license

--agreement, including, without limitation, that your use is for

--the sole purpose of programming logic devices manufactured by

--Intel and sold by Intel or its authorized distributors.  Please

--refer to the applicable agreement for further details.

LIBRARY ieee;

USE ieee.std_logic_1164.all;

LIBRARY altera_mf;

USE altera_mf.all;

ENTITY pll IS

        PORT

        (

                areset          : IN STD_LOGIC  := '0';

                inclk0          : IN STD_LOGIC  := '0';

                c0              : OUT STD_LOGIC ;

                c1              : OUT STD_LOGIC ;

                locked          : OUT STD_LOGIC

        );

END pll;

ARCHITECTURE SYN OF pll IS

        SIGNAL sub_wire0        : STD_LOGIC_VECTOR (4 DOWNTO 0);

        SIGNAL sub_wire1        : STD_LOGIC ;

        SIGNAL sub_wire2        : STD_LOGIC ;

        SIGNAL sub_wire3        : STD_LOGIC ;

        SIGNAL sub_wire4        : STD_LOGIC ;

        SIGNAL sub_wire5        : STD_LOGIC_VECTOR (1 DOWNTO 0);

        SIGNAL sub_wire6_bv     : BIT_VECTOR (0 DOWNTO 0);

        SIGNAL sub_wire6        : STD_LOGIC_VECTOR (0 DOWNTO 0);

        COMPONENT altpll

        GENERIC (

                bandwidth_type          : STRING;

                clk0_divide_by          : NATURAL;

                clk0_duty_cycle         : NATURAL;

                clk0_multiply_by                : NATURAL;

                clk0_phase_shift                : STRING;

                clk1_divide_by          : NATURAL;

                clk1_duty_cycle         : NATURAL;

                clk1_multiply_by                : NATURAL;

                clk1_phase_shift                : STRING;

                compensate_clock                : STRING;

                inclk0_input_frequency          : NATURAL;

                intended_device_family          : STRING;

                lpm_hint                : STRING;

                lpm_type                : STRING;

                operation_mode          : STRING;

                pll_type                : STRING;

                port_activeclock                : STRING;

                port_areset             : STRING;

                port_clkbad0            : STRING;

                port_clkbad1            : STRING;

                port_clkloss            : STRING;

                port_clkswitch          : STRING;

                port_configupdate               : STRING;

                port_fbin               : STRING;

                port_inclk0             : STRING;

                port_inclk1             : STRING;

                port_locked             : STRING;

                port_pfdena             : STRING;

                port_phasecounterselect         : STRING;

                port_phasedone          : STRING;

                port_phasestep          : STRING;

                port_phaseupdown                : STRING;

                port_pllena             : STRING;

                port_scanaclr           : STRING;

                port_scanclk            : STRING;

                port_scanclkena         : STRING;

                port_scandata           : STRING;

                port_scandataout                : STRING;

                port_scandone           : STRING;

                port_scanread           : STRING;

                port_scanwrite          : STRING;

                port_clk0               : STRING;

                port_clk1               : STRING;

                port_clk2               : STRING;

                port_clk3               : STRING;

                port_clk4               : STRING;

                port_clk5               : STRING;

                port_clkena0            : STRING;

                port_clkena1            : STRING;

                port_clkena2            : STRING;

                port_clkena3            : STRING;

                port_clkena4            : STRING;

                port_clkena5            : STRING;

                port_extclk0            : STRING;

                port_extclk1            : STRING;

                port_extclk2            : STRING;

                port_extclk3            : STRING;

                self_reset_on_loss_lock         : STRING;

                width_clock             : NATURAL

        );

        PORT (

                        areset  : IN STD_LOGIC ;

                        inclk   : IN STD_LOGIC_VECTOR (1 DOWNTO 0);

                        clk     : OUT STD_LOGIC_VECTOR (4 DOWNTO 0);

                        locked  : OUT STD_LOGIC

        );

        END COMPONENT;

BEGIN

        sub_wire6_bv(0 DOWNTO 0) <= "0";

        sub_wire6    <= To_stdlogicvector(sub_wire6_bv);

        sub_wire2    <= sub_wire0(1);

        sub_wire1    <= sub_wire0(0);

        c0    <= sub_wire1;

        c1    <= sub_wire2;

        locked    <= sub_wire3;

        sub_wire4    <= inclk0;

        sub_wire5    <= sub_wire6(0 DOWNTO 0) & sub_wire4;

        altpll_component : altpll

        GENERIC MAP (

                bandwidth_type => "AUTO",

                clk0_divide_by => 2,

                clk0_duty_cycle => 50,

                clk0_multiply_by => 7,

                clk0_phase_shift => "0",

                clk1_divide_by => 4,

                clk1_duty_cycle => 50,

                clk1_multiply_by => 7,

                clk1_phase_shift => "0",

                compensate_clock => "CLK0",

                inclk0_input_frequency => 20000,

                intended_device_family => "Cyclone 10 LP",

                lpm_hint => "CBX_MODULE_PREFIX=pll",

                lpm_type => "altpll",

                operation_mode => "NORMAL",

                pll_type => "AUTO",

                port_activeclock => "PORT_UNUSED",

                port_areset => "PORT_USED",

                port_clkbad0 => "PORT_UNUSED",

                port_clkbad1 => "PORT_UNUSED",

                port_clkloss => "PORT_UNUSED",

                port_clkswitch => "PORT_UNUSED",

                port_configupdate => "PORT_UNUSED",

                port_fbin => "PORT_UNUSED",

                port_inclk0 => "PORT_USED",

                port_inclk1 => "PORT_UNUSED",

                port_locked => "PORT_USED",

                port_pfdena => "PORT_UNUSED",

                port_phasecounterselect => "PORT_UNUSED",

                port_phasedone => "PORT_UNUSED",

                port_phasestep => "PORT_UNUSED",

                port_phaseupdown => "PORT_UNUSED",

                port_pllena => "PORT_UNUSED",

                port_scanaclr => "PORT_UNUSED",

                port_scanclk => "PORT_UNUSED",

                port_scanclkena => "PORT_UNUSED",

                port_scandata => "PORT_UNUSED",

                port_scandataout => "PORT_UNUSED",

                port_scandone => "PORT_UNUSED",

                port_scanread => "PORT_UNUSED",

                port_scanwrite => "PORT_UNUSED",

                port_clk0 => "PORT_USED",

                port_clk1 => "PORT_USED",

                port_clk2 => "PORT_UNUSED",

                port_clk3 => "PORT_UNUSED",

                port_clk4 => "PORT_UNUSED",

                port_clk5 => "PORT_UNUSED",

                port_clkena0 => "PORT_UNUSED",

                port_clkena1 => "PORT_UNUSED",

                port_clkena2 => "PORT_UNUSED",

                port_clkena3 => "PORT_UNUSED",

                port_clkena4 => "PORT_UNUSED",

                port_clkena5 => "PORT_UNUSED",

                port_extclk0 => "PORT_UNUSED",

                port_extclk1 => "PORT_UNUSED",

                port_extclk2 => "PORT_UNUSED",

                port_extclk3 => "PORT_UNUSED",

                self_reset_on_loss_lock => "OFF",

                width_clock => 5

        )

        PORT MAP (

                areset => areset,

                inclk => sub_wire5,

                clk => sub_wire0,

                locked => sub_wire3

        );

END SYN;

-- ============================================================

-- CNX file retrieval info

-- ============================================================

-- Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0"

-- Retrieval info: PRIVATE: BANDWIDTH STRING "1.000"

-- Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "1"

-- Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz"

-- Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low"

-- Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1"

-- Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0"

-- Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0"

-- Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0"

-- Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0"

-- Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"

-- Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"

-- Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"

-- Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0"

-- Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "c0"

-- Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "Any"

-- Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "2"

-- Retrieval info: PRIVATE: DIV_FACTOR1 NUMERIC "4"

-- Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000"

-- Retrieval info: PRIVATE: DUTY_CYCLE1 STRING "50.00000000"

-- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE0 STRING "175.000000"

-- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE1 STRING "87.500000"

-- Retrieval info: PRIVATE: EXPLICIT_SWITCHOVER_COUNTER STRING "0"

-- Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0"

-- Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1"

-- Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "0"

-- Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0"

-- Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "1048575"

-- Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1"

-- Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "50.000"

-- Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz"

-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "100.000"

-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1"

-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1"

-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz"

-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"

-- Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1"

-- Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "1"

-- Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1"

-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "Not Available"

-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0"

-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "deg"

-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT1 STRING "ps"

-- Retrieval info: PRIVATE: MIG_DEVICE_SPEED_GRADE STRING "Any"

-- Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0"

-- Retrieval info: PRIVATE: MIRROR_CLK1 STRING "0"

-- Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "7"

-- Retrieval info: PRIVATE: MULT_FACTOR1 NUMERIC "7"

-- Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1"

-- Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "175.00000000"

-- Retrieval info: PRIVATE: OUTPUT_FREQ1 STRING "70.00000000"

-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "0"

-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE1 STRING "0"

-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz"

-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT1 STRING "MHz"

-- Retrieval info: PRIVATE: PHASE_RECONFIG_FEATURE_ENABLED STRING "1"

-- Retrieval info: PRIVATE: PHASE_RECONFIG_INPUTS_CHECK STRING "0"

-- Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000"

-- Retrieval info: PRIVATE: PHASE_SHIFT1 STRING "0.00000000"

-- Retrieval info: PRIVATE: PHASE_SHIFT_STEP_ENABLED_CHECK STRING "0"

-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "deg"

-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT1 STRING "ps"

-- Retrieval info: PRIVATE: PLL_ADVANCED_PARAM_CHECK STRING "0"

-- Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "1"

-- Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1"

-- Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0"

-- Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0"

-- Retrieval info: PRIVATE: PLL_FBMIMIC_CHECK STRING "0"

-- Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0"

-- Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0"

-- Retrieval info: PRIVATE: PLL_TARGET_HARCOPY_CHECK NUMERIC "0"

-- Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0"

-- Retrieval info: PRIVATE: RECONFIG_FILE STRING "pll.mif"

-- Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0"

-- Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "1"

-- Retrieval info: PRIVATE: SELF_RESET_LOCK_LOSS STRING "0"

-- Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0"

-- Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0"

-- Retrieval info: PRIVATE: SPREAD_FREQ STRING "50.000"

-- Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz"

-- Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500"

-- Retrieval info: PRIVATE: SPREAD_USE STRING "0"

-- Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0"

-- Retrieval info: PRIVATE: STICKY_CLK0 STRING "1"

-- Retrieval info: PRIVATE: STICKY_CLK1 STRING "1"

-- Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1"

-- Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "1"

-- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"

-- Retrieval info: PRIVATE: USE_CLK0 STRING "1"

-- Retrieval info: PRIVATE: USE_CLK1 STRING "1"

-- Retrieval info: PRIVATE: USE_CLKENA0 STRING "0"

-- Retrieval info: PRIVATE: USE_CLKENA1 STRING "0"

-- Retrieval info: PRIVATE: USE_MIL_SPEED_GRADE NUMERIC "0"

-- Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0"

-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all

-- Retrieval info: CONSTANT: BANDWIDTH_TYPE STRING "AUTO"

-- Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "2"

-- Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50"

-- Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "7"

-- Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0"

-- Retrieval info: CONSTANT: CLK1_DIVIDE_BY NUMERIC "4"

-- Retrieval info: CONSTANT: CLK1_DUTY_CYCLE NUMERIC "50"

-- Retrieval info: CONSTANT: CLK1_MULTIPLY_BY NUMERIC "7"

-- Retrieval info: CONSTANT: CLK1_PHASE_SHIFT STRING "0"

-- Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0"

-- Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "20000"

-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"

-- Retrieval info: CONSTANT: LPM_TYPE STRING "altpll"

-- Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL"

-- Retrieval info: CONSTANT: PLL_TYPE STRING "AUTO"

-- Retrieval info: CONSTANT: PORT_ACTIVECLOCK STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_ARESET STRING "PORT_USED"

-- Retrieval info: CONSTANT: PORT_CLKBAD0 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_CLKBAD1 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_CLKLOSS STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_FBIN STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_INCLK0 STRING "PORT_USED"

-- Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_LOCKED STRING "PORT_USED"

-- Retrieval info: CONSTANT: PORT_PFDENA STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_PHASECOUNTERSELECT STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_PHASEDONE STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_PHASESTEP STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_PHASEUPDOWN STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_PLLENA STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_SCANACLR STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_SCANREAD STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_SCANWRITE STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_clk0 STRING "PORT_USED"

-- Retrieval info: CONSTANT: PORT_clk1 STRING "PORT_USED"

-- Retrieval info: CONSTANT: PORT_clk2 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_clk3 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_clk4 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_clk5 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_clkena0 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_clkena1 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_clkena2 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_clkena3 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_clkena4 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_clkena5 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_extclk0 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_extclk1 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_extclk2 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: PORT_extclk3 STRING "PORT_UNUSED"

-- Retrieval info: CONSTANT: SELF_RESET_ON_LOSS_LOCK STRING "OFF"

-- Retrieval info: CONSTANT: WIDTH_CLOCK NUMERIC "5"

-- Retrieval info: USED_PORT: @clk 0 0 5 0 OUTPUT_CLK_EXT VCC "@clk[4..0]"

-- Retrieval info: USED_PORT: @inclk 0 0 2 0 INPUT_CLK_EXT VCC "@inclk[1..0]"

-- Retrieval info: USED_PORT: areset 0 0 0 0 INPUT GND "areset"

-- Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT_CLK_EXT VCC "c0"

-- Retrieval info: USED_PORT: c1 0 0 0 0 OUTPUT_CLK_EXT VCC "c1"

-- Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT_CLK_EXT GND "inclk0"

-- Retrieval info: USED_PORT: locked 0 0 0 0 OUTPUT GND "locked"

-- Retrieval info: CONNECT: @areset 0 0 0 0 areset 0 0 0 0

-- Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0

-- Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0

-- Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0

-- Retrieval info: CONNECT: c1 0 0 0 0 @clk 0 0 1 1

-- Retrieval info: CONNECT: locked 0 0 0 0 @locked 0 0 0 0

-- Retrieval info: GEN_FILE: TYPE_NORMAL pll.vhd TRUE

-- Retrieval info: GEN_FILE: TYPE_NORMAL pll.ppf TRUE

-- Retrieval info: GEN_FILE: TYPE_NORMAL pll.inc FALSE

-- Retrieval info: GEN_FILE: TYPE_NORMAL pll.cmp TRUE

-- Retrieval info: GEN_FILE: TYPE_NORMAL pll.bsf FALSE

-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_inst.vhd FALSE

-- Retrieval info: LIB_FILE: altera_mf

-- Retrieval info: CBX_MODULE_PREFIX: ON