| 1 |
2 |
NikosAl |
======================================================================================================
|
| 2 |
|
|
IPv4 Ethernet Packet Transmitter (in VHDL)
|
| 3 |
|
|
======================================================================================================
|
| 4 |
|
|
|
| 5 |
|
|
|
| 6 |
|
|
Build date: December 15th, 2009
|
| 7 |
|
|
|
| 8 |
|
|
|
| 9 |
|
|
Description
|
| 10 |
|
|
-----------
|
| 11 |
|
|
|
| 12 |
|
|
|
| 13 |
|
|
This is a VHDL implementation of a component that can be connected to the input port of the
|
| 14 |
|
|
Virtex-5 Ethernet MAC Local Link Wrapper and enable transmission of IPv4 ethernet packets.
|
| 15 |
|
|
|
| 16 |
|
|
Example placement:
|
| 17 |
|
|
|
| 18 |
|
|
|
| 19 |
|
|
-- ----------------------------------------------------------------------
|
| 20 |
|
|
-- | EXAMPLE DESIGN WRAPPER |
|
| 21 |
|
|
-- | --------------------------------------------------------|
|
| 22 |
|
|
-- | |LOCAL LINK WRAPPER |
|
| 23 |
|
|
-- | | -----------------------------------------|
|
| 24 |
|
|
-- | | |BLOCK LEVEL WRAPPER |
|
| 25 |
|
|
-- | | | --------------------- |
|
| 26 |
|
|
-- | -------- | ---------- | | ETHERNET MAC | |
|
| 27 |
|
|
-- | | IPv4 | | | | | | WRAPPER | --------- |
|
| 28 |
|
|
-- |->| pack |->|->| |--|--->| Tx Tx |--| |--->|
|
| 29 |
|
|
-- | | trans| | | | | | client PHY | | | |
|
| 30 |
|
|
-- | -------- | | LOCAL | | | I/F I/F | | | |
|
| 31 |
|
|
-- | | | LINK | | | | | PHY | |
|
| 32 |
|
|
-- | | | FIFO | | | | | I/F | |
|
| 33 |
|
|
-- | | | | | | | | | |
|
| 34 |
|
|
-- | | | | | | Rx Rx | | | |
|
| 35 |
|
|
-- | | | | | | client PHY | | | |
|
| 36 |
|
|
-- | <-|<-| |<-|----| I/F I/F |<-| |<---|
|
| 37 |
|
|
-- | | | | | | | --------- |
|
| 38 |
|
|
-- | | ---------- | --------------------- |
|
| 39 |
|
|
-- | | -----------------------------------------|
|
| 40 |
|
|
-- | --------------------------------------------------------|
|
| 41 |
|
|
-- ----------------------------------------------------------------------
|
| 42 |
|
|
|
| 43 |
|
|
|
| 44 |
|
|
|
| 45 |
|
|
Package Structure
|
| 46 |
|
|
-----------------
|
| 47 |
|
|
|
| 48 |
|
|
This package contains the following files and folder:
|
| 49 |
|
|
|
| 50 |
|
|
-README : This file
|
| 51 |
|
|
|
| 52 |
|
|
-IPv4_PACKET_TRANSMITTER : This folder contains VHDL, XCO and NGC files.
|
| 53 |
|
|
|
| 54 |
|
|
-LUT COE file : This folder contains a COE file for the LUT that contains the IP packet header field.
|
| 55 |
|
|
|
| 56 |
|
|
|
| 57 |
|
|
|
| 58 |
|
|
Usage of the IPv4_PACKET_TRANSMITTER
|
| 59 |
|
|
-----------------------
|
| 60 |
|
|
|
| 61 |
|
|
|
| 62 |
|
|
Before integrating the IPv4_PACKET_TRANSMITTER into your design you have to reinitialize the LUT.
|
| 63 |
|
|
This LUT contains the header section of the IP packet.One must change the X fields that appear in the following table.
|
| 64 |
|
|
|
| 65 |
|
|
The field that should be changed are:
|
| 66 |
|
|
Destination MAC Address : (LUT)
|
| 67 |
|
|
Source MAC Address : (LUT)
|
| 68 |
|
|
Source IP Address : (LUT)
|
| 69 |
|
|
Destination IP Address : (LUT)
|
| 70 |
|
|
Source Port : (LUT)
|
| 71 |
|
|
Destination Port : (LUT)
|
| 72 |
|
|
Header Checksum : VHDL file
|
| 73 |
|
|
|
| 74 |
|
|
The Addresses are read from the LUT, thats why a reinitialization is required.
|
| 75 |
|
|
The Header Checksum base value is not read from the LUT. It can be found in the VHDL file.
|
| 76 |
|
|
The Header Checksum base value depends on the IP Addresses and it is the Header Checksum value of a packet with no user data.
|
| 77 |
|
|
|
| 78 |
|
|
|
| 79 |
|
|
------------------------------------------------------------------------------------------------------------------------------------------
|
| 80 |
|
|
------------------------------------------------------------------------------------------------------------------------------------------
|
| 81 |
|
|
-- IPv4 PACKET STRUCTURE : -- --
|
| 82 |
|
|
-- size | Description | Transmission Order | Position --
|
| 83 |
|
|
------------------------------------------------------------------------------------------------------------------------------------------
|
| 84 |
|
|
-- 6 bytes | Destin MAC Address (PC) | 0 1 2 3 4 5 | LUT --
|
| 85 |
|
|
-- | X-X-X-X-X-X | | --
|
| 86 |
|
|
-- | | | --
|
| 87 |
|
|
-- 6 bytes | Source MAC Address (FPGA) | 6 7 8 9 10 11 | LUT --
|
| 88 |
|
|
-- | 11111111-11111111-11111111-11111111-... | | --
|
| 89 |
|
|
-- 2 bytes | Ethernet Type | 12 13 | LUT --
|
| 90 |
|
|
-- | (fixed to 00001000-00000000 :=> | | --
|
| 91 |
|
|
-- | Internet Protocol, Version 4 (IPv4)) | | --
|
| 92 |
|
|
-- -- Start of IPv4 Packet - - - - - - - - - - - - - -- --
|
| 93 |
|
|
-- 1 byte | 4 MSBs = Version , 4 LSBs = Header Length| 14 | LUT --
|
| 94 |
|
|
-- | 0100 0101 | | --
|
| 95 |
|
|
-- 1 byte | Differentiated Services | 15 | LUT --
|
| 96 |
|
|
-- | 00000000 | | --
|
| 97 |
|
|
-- 2 bytes | Total Length | 16 17 | REG --
|
| 98 |
|
|
-- | 00000000-00100100 (base: 20 + 8 + datalength)| | --
|
| 99 |
|
|
-- 2 bytes | Identification | 18 19 | LUT --
|
| 100 |
|
|
-- | 00000000-00000000 | | --
|
| 101 |
|
|
-- 2 bytes | 3 MSBs = Flags , 13 LSBs = Fragment Offset| 20 21 | LUT --
|
| 102 |
|
|
-- | 010 - 0000000000000 | | --
|
| 103 |
|
|
-- 1 byte | Time to Live | 22 | LUT --
|
| 104 |
|
|
-- | 01000000 | | --
|
| 105 |
|
|
-- 1 byte | Protocol | 23 | LUT --
|
| 106 |
|
|
-- | 00010001 | | --
|
| 107 |
|
|
-- 2 bytes | Header Checksum | 24 25 | REG --
|
| 108 |
|
|
-- | X X (base value) | | --
|
| 109 |
|
|
-- 4 bytes | Source IP Address | 26 27 28 29 | LUT --
|
| 110 |
|
|
-- | X-X-X-X - FPGA | | --
|
| 111 |
|
|
-- 4 bytes | Destin IP Address | 30 31 32 33 | LUT --
|
| 112 |
|
|
-- | X-X-X-X - PC | | --
|
| 113 |
|
|
-- -- Start of UDP Packet - - - - - - - - - - - - - - -- --
|
| 114 |
|
|
-- 2 bytes | Source Port | 34 35 | LUT --
|
| 115 |
|
|
-- | X-X | | --
|
| 116 |
|
|
-- 2 bytes | Destination Port | 36 37 | LUT --
|
| 117 |
|
|
-- | X-X | | --
|
| 118 |
|
|
-- 2 bytes | Length | 38 39 | REG --
|
| 119 |
|
|
-- | 00000000 - 00010000 (8 + # data bytes)| | --
|
| 120 |
|
|
-- 2 bytes | Checksum | 40 41 | LUT --
|
| 121 |
|
|
-- | 00000000 - 00000000 | | --
|
| 122 |
|
|
-- X bytes | Data | 42 .. X | from input --
|
| 123 |
|
|
-- | | | -- --
|
| 124 |
|
|
------------------------------------------------------------------------------------------------------------------------------------------
|
| 125 |
|
|
------------------------------------------------------------------------------------------------------------------------------------------
|
| 126 |
|
|
|
| 127 |
|
|
|
| 128 |
|
|
|
| 129 |
|
|
Interface of the LAU
|
| 130 |
|
|
--------------------
|
| 131 |
|
|
|
| 132 |
|
|
|
| 133 |
|
|
The interface of the unit is defined as follows:
|
| 134 |
|
|
|
| 135 |
|
|
entity IPV4_PACKET_TRANSMITTER is
|
| 136 |
|
|
Port ( rst : in STD_LOGIC;
|
| 137 |
|
|
clk_125MHz : in STD_LOGIC;
|
| 138 |
|
|
transmit_start_enable : in STD_LOGIC;
|
| 139 |
|
|
transmit_data_length : in STD_LOGIC_VECTOR (15 downto 0);
|
| 140 |
|
|
usr_data_trans_phase_on : out STD_LOGIC;
|
| 141 |
|
|
transmit_data_input_bus : in STD_LOGIC_VECTOR (7 downto 0);
|
| 142 |
|
|
start_of_frame_O : out STD_LOGIC;
|
| 143 |
|
|
end_of_frame_O : out STD_LOGIC;
|
| 144 |
|
|
source_ready : out STD_LOGIC;
|
| 145 |
|
|
transmit_data_output_bus : out STD_LOGIC_VECTOR (7 downto 0)
|
| 146 |
|
|
);
|
| 147 |
|
|
end IPV4_PACKET_TRANSMITTER;
|
| 148 |
|
|
|
| 149 |
|
|
|
| 150 |
|
|
The IPv4 PACKET TRANSMITTER and the LOCAL LINK WRAPPER must have the same rst and clk signals.
|
| 151 |
|
|
|
| 152 |
|
|
Signal transmit_start_enable : active high , It must be high for one clock cycle only.
|
| 153 |
|
|
|
| 154 |
|
|
Signal transmit_data_length : number of user data to be transmitted (number of bytes)
|
| 155 |
|
|
|
| 156 |
|
|
Signal usr_data_trans_phase_on: is high one clock cycle before the transmittion of user data and remains high while transmitting user data.
|
| 157 |
|
|
|
| 158 |
|
|
Signal transmit_data_input_bus : input data to be transmitted. Starts transmitting one clock cycle after the usr_data_trans_phase_on is set.
|
| 159 |
|
|
|
| 160 |
|
|
Signals start_of_frame_O,end_of_frame_O,source_ready,transmit_data_output_bus should be connected to the local link wrapper's input ports.
|
| 161 |
|
|
|
| 162 |
|
|
|
| 163 |
|
|
Implementation Details
|
| 164 |
|
|
----------------------
|
| 165 |
|
|
|
| 166 |
|
|
The VHDL unit have been designed using the Xilinx 10.1 Design Suite.
|
| 167 |
|
|
|
| 168 |
|
|
ISE 10.1 was used to create the unit.
|
| 169 |
|
|
|
| 170 |
|
|
|
| 171 |
|
|
|
| 172 |
|
|
Verification Details
|
| 173 |
|
|
--------------------
|
| 174 |
|
|
|
| 175 |
|
|
Modelsim 6.3f was used for extensive post place and route simulations.
|
| 176 |
|
|
|
| 177 |
|
|
The development board HTG-V5-PCIE by HiTech Global populated with a V5SX95T-1 FPGA was used to verify the correct behavior of the IPv4_PACKET_TRANSMITTER.
|
| 178 |
|
|
|
| 179 |
|
|
|
| 180 |
|
|
|
| 181 |
|
|
|
| 182 |
|
|
Authors and Contact Details
|
| 183 |
|
|
---------------------------
|
| 184 |
|
|
|
| 185 |
|
|
Nikos Alachiotis alachiot@in.tum.de , n.alachiotis@gmail.com
|
| 186 |
|
|
Alexandros Stamatakis stamatak@in.tum.de
|
| 187 |
|
|
|
| 188 |
|
|
Technichal University of Munich
|
| 189 |
|
|
Department of Computer Science / I 12
|
| 190 |
|
|
The Exelixis Lab
|
| 191 |
|
|
Boltzmannstr. 3
|
| 192 |
|
|
D-85748 Garching b. Muenchen
|
| 193 |
|
|
|
| 194 |
|
|
|
| 195 |
|
|
|
| 196 |
|
|
Citation
|
| 197 |
|
|
--------
|
| 198 |
|
|
|
| 199 |
|
|
"IPv4 PACKET TRANSMITTER by Nikolaos Alachiotis and Alexandros Stamatakis, The Exelixis Lab, TU Munich, distributed by the authors via http://wwwkramer.in.tum.de/exelixis/"
|
| 200 |
|
|
|
| 201 |
|
|
|
| 202 |
|
|
Copyright
|
| 203 |
|
|
---------
|
| 204 |
|
|
|
| 205 |
|
|
This component is free. In case you use it for any purpose, particularly
|
| 206 |
|
|
when publishing work relying on this component you must cite it as:
|
| 207 |
|
|
|
| 208 |
|
|
IPv4 PACKET TRANSMITTER by Nikolas Alachiotis and Alexandros Stamatakis, The Exelixis Lab, TU Munich, distributed by the authors via
|
| 209 |
|
|
http://wwwkramer.in.tum.de/exelixis/
|
| 210 |
|
|
|
| 211 |
|
|
You can redistribute it and/or modify
|
| 212 |
|
|
it under the terms of the GNU General Public License as published by
|
| 213 |
|
|
the Free Software Foundation; either version 2 of the License, or
|
| 214 |
|
|
(at your option) any later version.
|
| 215 |
|
|
|
| 216 |
|
|
This component is distributed in the hope that it will be useful,
|
| 217 |
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
| 218 |
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
| 219 |
|
|
GNU General Public License for more details.
|
| 220 |
|
|
|
| 221 |
|
|
|
| 222 |
|
|
|
| 223 |
|
|
Release Notes
|
| 224 |
|
|
------------
|
| 225 |
|
|
|
| 226 |
|
|
Build date : December 15th, 2009
|
| 227 |
|
|
|
| 228 |
|
|
|
| 229 |
|
|
|
| 230 |
|
|
|
| 231 |
|
|
|
| 232 |
|
|
|
| 233 |
|
|
|
