Subversion Repositories jart

-- Author : Julian Andres Guarin Reyes.

-- Project : JART, Just Another Ray Tracer.

-- email : jguarin2002 at gmail.com, j.guarin at javeriana.edu.co

-- This code was entirely written by Julian Andres Guarin Reyes.

-- The following code is licensed under GNU Public License

-- http://www.gnu.org/licenses/gpl-3.0.txt.

 -- This file is part of JART (Just Another Ray Tracer).

    -- JART (Just Another Ray Tracer) is free software: you can redistribute it and/or modify

    -- it under the terms of the GNU General Public License as published by

    -- the Free Software Foundation, either version 3 of the License, or

    -- (at your option) any later version.

    -- JART (Just Another Ray Tracer) is distributed in the hope that it will be useful,

    -- but WITHOUT ANY WARRANTY; without even the implied warranty of

    -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

    -- GNU General Public License for more details.

    -- You should have received a copy of the GNU General Public License

    -- along with JART (Just Another Ray Tracer).  If not, see <http://www.gnu.org/licenses/>.library ieee;

-- Zu synthesises the z and x components of the unitary vectors along an image vertical and/or horizontal line respectively. 

-- For the jart project Zu must be used with the following values:

-- When synthesising X , VALSTART must be 34, when synthesising Z, VALSTART must be 4.  

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_signed.all;

entity zu is

        generic

        (

                VALSTART                : integer := 15

        );

        port (

                clk, rst, ena   : in std_logic; -- The usual control signals

                clr                             : in std_logic;

                zpos                    : out integer range -1024 to 1023;

                zneg                    : out integer range -1024 to 1023

        );

end entity;

architecture rtl of zu is

begin

        process (clk,rst,ena,clr)

                variable pivot  : integer range 0 to 31;

                variable z      : integer range  -1024 to 1023;

        begin

                if rst='0' then

                        zpos<=VALSTART;

                        zneg<=-VALSTART;

                        z:=VALSTART;

                        pivot:=0;

                elsif rising_edge(clk) and ena='1' then

                        if clr='1' then

                                z:=VALSTART;

                                pivot:=0;

                        elsif pivot = 0 then

                                z:=z+3;

                                pivot:=1;

                        else

                                z:=z+2;

                                pivot:=0;

                        end if;

                        zpos <= z;

                        zneg <=-z;

                end if;

        end process;

end rtl;