| 1 |
3 |
martin |
# This file is a general .ucf for Nexys2 rev A board
|
| 2 |
|
|
# To use it in a project:
|
| 3 |
|
|
# - remove or comment the lines corresponding to unused pins
|
| 4 |
|
|
# - rename the used signals according to the project
|
| 5 |
|
|
|
| 6 |
|
|
# Signals Led<7>…Led<4> are assigned to pins which change type from s3e500 to other dies using the same package
|
| 7 |
|
|
# Both versions are provided in this file.
|
| 8 |
|
|
# Keep only the appropriate one, and remove or comment the other one.
|
| 9 |
|
|
|
| 10 |
|
|
|
| 11 |
|
|
# clock pin for Nexys 2 Board
|
| 12 |
|
|
NET "clk" LOC = "B8"; # Bank = 0, Pin name = IP_L13P_0/GCLK8, Type = GCLK, Sch name = GCLK0
|
| 13 |
|
|
#NET "clk1" LOC = "U9"; # Bank = 2, Pin name = IO_L13P_2/D4/GCLK14, Type = DUAL/GCLK, Sch name = GCLK1
|
| 14 |
|
|
|
| 15 |
|
|
# onBoard USB controller
|
| 16 |
|
|
NET "EppAstb" LOC = "V14"; # Bank = 2, Pin name = IP_L23P_2, Type = INPUT, Sch name = U-FLAGA
|
| 17 |
|
|
NET "EppDstb" LOC = "U14"; # Bank = 2, Pin name = IP_L23N_2, Type = INPUT, Sch name = U-FLAGB
|
| 18 |
|
|
NET "UsbFlag" LOC = "V16"; # Bank = 2, Pin name = IP, Type = INPUT, Sch name = U-FLAGC
|
| 19 |
|
|
NET "EppWait" LOC = "N9"; # Bank = 2, Pin name = IO_L12P_2/D7/GCLK12, Type = DUAL/GCLK, Sch name = U-SLRD
|
| 20 |
|
|
NET "EppDB<0>" LOC = "R14"; # Bank = 2, Pin name = IO_L24N_2/A20, Type = DUAL, Sch name = U-FD0
|
| 21 |
|
|
NET "EppDB<1>" LOC = "R13"; # Bank = 2, Pin name = IO_L22N_2/A22, Type = DUAL, Sch name = U-FD1
|
| 22 |
|
|
NET "EppDB<2>" LOC = "P13"; # Bank = 2, Pin name = IO_L22P_2/A23, Type = DUAL, Sch name = U-FD2
|
| 23 |
|
|
NET "EppDB<3>" LOC = "T12"; # Bank = 2, Pin name = IO_L20P_2, Type = I/O, Sch name = U-FD3
|
| 24 |
|
|
NET "EppDB<4>" LOC = "N11"; # Bank = 2, Pin name = IO_L18N_2, Type = I/O, Sch name = U-FD4
|
| 25 |
|
|
NET "EppDB<5>" LOC = "R11"; # Bank = 2, Pin name = IO, Type = I/O, Sch name = U-FD5
|
| 26 |
|
|
NET "EppDB<6>" LOC = "P10"; # Bank = 2, Pin name = IO_L15N_2/D1/GCLK3, Type = DUAL/GCLK, Sch name = U-FD6
|
| 27 |
|
|
NET "EppDB<7>" LOC = "R10"; # Bank = 2, Pin name = IO_L15P_2/D2/GCLK2, Type = DUAL/GCLK, Sch name = U-FD7
|
| 28 |
|
|
|
| 29 |
|
|
NET "UsbClk" LOC = "T15"; # Bank = 2, Pin name = IO/VREF_2, Type = VREF, Sch name = U-IFCLK
|
| 30 |
|
|
|
| 31 |
|
|
NET "UsbOE" LOC = "V15"; # Bank = 2, Pin name = IO_L25P_2/VS2/A19, Type = DUAL, Sch name = U-SLOE
|
| 32 |
|
|
NET "UsbWR" LOC = "V9"; # Bank = 2, Pin name = IO_L13N_2/D3/GCLK15, Type = DUAL/GCLK, Sch name = U-SWLR
|
| 33 |
|
|
NET "UsbPktEnd" LOC = "V12"; # Bank = 2, Pin name = IO_L19P_2, Type = I/O, Sch name = U-PKTEND
|
| 34 |
|
|
|
| 35 |
|
|
NET "UsbDir" LOC = "T16"; # Bank = 2, Pin name = IO_L26P_2/VS0/A17, Type = DUAL, Sch name = U-SLCS
|
| 36 |
|
|
NET "UsbMode" LOC = "U15"; # Bank = 2, Pin name = IO_L25N_2/VS1/A18, Type = DUAL, Sch name = U-INT0#
|
| 37 |
|
|
|
| 38 |
|
|
NET "UsbAdr<0>" LOC = "T14"; # Bank = 2, Pin name = IO_L24P_2/A21, Type = DUAL, Sch name = U-FIFOAD0
|
| 39 |
|
|
NET "UsbAdr<1>" LOC = "V13"; # Bank = 2, Pin name = IO_L19N_2/VREF_2, Type = VREF, Sch name = U-FIFOAD1
|
| 40 |
|
|
|
| 41 |
|
|
#NET "UsbRdy" LOC = "U13"; # Bank = 2, Pin name = IP, Type = INPUT, Sch name = U-RDY
|
| 42 |
|
|
|
| 43 |
|
|
# onBoard Cellular RAM and StrataFlash
|
| 44 |
|
|
NET "MemOE" LOC = "T2"; # Bank = 3, Pin name = IO_L24P_3, Type = I/O, Sch name = OE
|
| 45 |
|
|
NET "MemWR" LOC = "N7"; # Bank = 2, Pin name = IO_L07P_2, Type = I/O, Sch name = WE
|
| 46 |
|
|
|
| 47 |
|
|
NET "RamAdv" LOC = "J4"; # Bank = 3, Pin name = IO_L11N_3/LHCLK1, Type = LHCLK, Sch name = MT-ADV
|
| 48 |
|
|
NET "RamCS" LOC = "R6"; # Bank = 2, Pin name = IO_L05P_2, Type = I/O, Sch name = MT-CE
|
| 49 |
|
|
NET "RamClk" LOC = "H5"; # Bank = 3, Pin name = IO_L08N_3, Type = I/O, Sch name = MT-CLK
|
| 50 |
|
|
NET "RamCRE" LOC = "P7"; # Bank = 2, Pin name = IO_L07N_2, Type = I/O, Sch name = MT-CRE
|
| 51 |
|
|
NET "RamLB" LOC = "K5"; # Bank = 3, Pin name = IO_L14N_3/LHCLK7, Type = LHCLK, Sch name = MT-LB
|
| 52 |
|
|
NET "RamUB" LOC = "K4"; # Bank = 3, Pin name = IO_L13N_3/LHCLK5, Type = LHCLK, Sch name = MT-UB
|
| 53 |
|
|
NET "RamWait" LOC = "F5"; # Bank = 3, Pin name = IP, Type = INPUT, Sch name = MT-WAIT
|
| 54 |
|
|
|
| 55 |
|
|
NET "FlashRp" LOC = "T5"; # Bank = 2, Pin name = IO_L04N_2, Type = I/O, Sch name = RP#
|
| 56 |
|
|
NET "FlashCS" LOC = "R5"; # Bank = 2, Pin name = IO_L04P_2, Type = I/O, Sch name = ST-CE
|
| 57 |
|
|
NET "FlashStSts" LOC = "D3"; # Bank = 3, Pin name = IP, Type = INPUT, Sch name = ST-STS
|
| 58 |
|
|
|
| 59 |
|
|
NET "MemAdr<1>" LOC = "J1"; # Bank = 3, Pin name = IO_L12P_3/LHCLK2, Type = LHCLK, Sch name = ADR1
|
| 60 |
|
|
NET "MemAdr<2>" LOC = "J2"; # Bank = 3, Pin name = IO_L12N_3/LHCLK3/IRDY2, Type = LHCLK, Sch name = ADR2
|
| 61 |
|
|
NET "MemAdr<3>" LOC = "H4"; # Bank = 3, Pin name = IO_L09P_3, Type = I/O, Sch name = ADR3
|
| 62 |
|
|
NET "MemAdr<4>" LOC = "H1"; # Bank = 3, Pin name = IO_L10N_3, Type = I/O, Sch name = ADR4
|
| 63 |
|
|
NET "MemAdr<5>" LOC = "H2"; # Bank = 3, Pin name = IO_L10P_3, Type = I/O, Sch name = ADR5
|
| 64 |
|
|
NET "MemAdr<6>" LOC = "J5"; # Bank = 3, Pin name = IO_L11P_3/LHCLK0, Type = LHCLK, Sch name = ADR6
|
| 65 |
|
|
NET "MemAdr<7>" LOC = "H3"; # Bank = 3, Pin name = IO_L09N_3, Type = I/O, Sch name = ADR7
|
| 66 |
|
|
NET "MemAdr<8>" LOC = "H6"; # Bank = 3, Pin name = IO_L08P_3, Type = I/O, Sch name = ADR8
|
| 67 |
|
|
NET "MemAdr<9>" LOC = "F1"; # Bank = 3, Pin name = IO_L05P_3, Type = I/O, Sch name = ADR9
|
| 68 |
|
|
NET "MemAdr<10>" LOC = "G3"; # Bank = 3, Pin name = IO_L06P_3, Type = I/O, Sch name = ADR10
|
| 69 |
|
|
NET "MemAdr<11>" LOC = "G6"; # Bank = 3, Pin name = IO_L07P_3, Type = I/O, Sch name = ADR11
|
| 70 |
|
|
NET "MemAdr<12>" LOC = "G5"; # Bank = 3, Pin name = IO_L07N_3, Type = I/O, Sch name = ADR12
|
| 71 |
|
|
NET "MemAdr<13>" LOC = "G4"; # Bank = 3, Pin name = IO_L06N_3/VREF_3, Type = VREF, Sch name = ADR13
|
| 72 |
|
|
NET "MemAdr<14>" LOC = "F2"; # Bank = 3, Pin name = IO_L05N_3, Type = I/O, Sch name = ADR14
|
| 73 |
|
|
NET "MemAdr<15>" LOC = "E1"; # Bank = 3, Pin name = IO_L03N_3, Type = I/O, Sch name = ADR15
|
| 74 |
|
|
NET "MemAdr<16>" LOC = "M5"; # Bank = 3, Pin name = IO_L19P_3, Type = I/O, Sch name = ADR16
|
| 75 |
|
|
NET "MemAdr<17>" LOC = "E2"; # Bank = 3, Pin name = IO_L03P_3, Type = I/O, Sch name = ADR17
|
| 76 |
|
|
NET "MemAdr<18>" LOC = "C2"; # Bank = 3, Pin name = IO_L01N_3, Type = I/O, Sch name = ADR18
|
| 77 |
|
|
NET "MemAdr<19>" LOC = "C1"; # Bank = 3, Pin name = IO_L01P_3, Type = I/O, Sch name = ADR19
|
| 78 |
|
|
NET "MemAdr<20>" LOC = "D2"; # Bank = 3, Pin name = IO_L02N_3/VREF_3, Type = VREF, Sch name = ADR20
|
| 79 |
|
|
NET "MemAdr<21>" LOC = "K3"; # Bank = 3, Pin name = IO_L13P_3/LHCLK4/TRDY2, Type = LHCLK, Sch name = ADR21
|
| 80 |
|
|
NET "MemAdr<22>" LOC = "D1"; # Bank = 3, Pin name = IO_L02P_3, Type = I/O, Sch name = ADR22
|
| 81 |
|
|
NET "MemAdr<23>" LOC = "K6"; # Bank = 3, Pin name = IO_L14P_3/LHCLK6, Type = LHCLK, Sch name = ADR23
|
| 82 |
|
|
|
| 83 |
|
|
NET "MemDB<0>" LOC = "L1"; # Bank = 3, Pin name = IO_L15P_3, Type = I/O, Sch name = DB0
|
| 84 |
|
|
NET "MemDB<1>" LOC = "L4"; # Bank = 3, Pin name = IO_L16N_3, Type = I/O, Sch name = DB1
|
| 85 |
|
|
NET "MemDB<2>" LOC = "L6"; # Bank = 3, Pin name = IO_L17P_3, Type = I/O, Sch name = DB2
|
| 86 |
|
|
NET "MemDB<3>" LOC = "M4"; # Bank = 3, Pin name = IO_L18P_3, Type = I/O, Sch name = DB3
|
| 87 |
|
|
NET "MemDB<4>" LOC = "N5"; # Bank = 3, Pin name = IO_L20N_3, Type = I/O, Sch name = DB4
|
| 88 |
|
|
NET "MemDB<5>" LOC = "P1"; # Bank = 3, Pin name = IO_L21N_3, Type = I/O, Sch name = DB5
|
| 89 |
|
|
NET "MemDB<6>" LOC = "P2"; # Bank = 3, Pin name = IO_L21P_3, Type = I/O, Sch name = DB6
|
| 90 |
|
|
NET "MemDB<7>" LOC = "R2"; # Bank = 3, Pin name = IO_L23N_3, Type = I/O, Sch name = DB7
|
| 91 |
|
|
NET "MemDB<8>" LOC = "L3"; # Bank = 3, Pin name = IO_L16P_3, Type = I/O, Sch name = DB8
|
| 92 |
|
|
NET "MemDB<9>" LOC = "L5"; # Bank = 3, Pin name = IO_L17N_3/VREF_3, Type = VREF, Sch name = DB9
|
| 93 |
|
|
NET "MemDB<10>" LOC = "M3"; # Bank = 3, Pin name = IO_L18N_3, Type = I/O, Sch name = DB10
|
| 94 |
|
|
NET "MemDB<11>" LOC = "M6"; # Bank = 3, Pin name = IO_L19N_3, Type = I/O, Sch name = DB11
|
| 95 |
|
|
NET "MemDB<12>" LOC = "L2"; # Bank = 3, Pin name = IO_L15N_3, Type = I/O, Sch name = DB12
|
| 96 |
|
|
NET "MemDB<13>" LOC = "N4"; # Bank = 3, Pin name = IO_L20P_3, Type = I/O, Sch name = DB13
|
| 97 |
|
|
NET "MemDB<14>" LOC = "R3"; # Bank = 3, Pin name = IO_L23P_3, Type = I/O, Sch name = DB14
|
| 98 |
|
|
NET "MemDB<15>" LOC = "T1"; # Bank = 3, Pin name = IO_L24N_3, Type = I/O, Sch name = DB15
|
| 99 |
|
|
|
| 100 |
|
|
# 7 segment display
|
| 101 |
|
|
NET "seg<0>" LOC = "L18"; # Bank = 1, Pin name = IO_L10P_1, Type = I/O, Sch name = CA
|
| 102 |
|
|
NET "seg<1>" LOC = "F18"; # Bank = 1, Pin name = IO_L19P_1, Type = I/O, Sch name = CB
|
| 103 |
|
|
NET "seg<2>" LOC = "D17"; # Bank = 1, Pin name = IO_L23P_1/HDC, Type = DUAL, Sch name = CC
|
| 104 |
|
|
NET "seg<3>" LOC = "D16"; # Bank = 1, Pin name = IO_L23N_1/LDC0, Type = DUAL, Sch name = CD
|
| 105 |
|
|
NET "seg<4>" LOC = "G14"; # Bank = 1, Pin name = IO_L20P_1, Type = I/O, Sch name = CE
|
| 106 |
|
|
NET "seg<5>" LOC = "J17"; # Bank = 1, Pin name = IO_L13P_1/A6/RHCLK4/IRDY1, Type = RHCLK/DUAL, Sch name = CF
|
| 107 |
|
|
NET "seg<6>" LOC = "H14"; # Bank = 1, Pin name = IO_L17P_1, Type = I/O, Sch name = CG
|
| 108 |
|
|
NET "dp" LOC = "C17"; # Bank = 1, Pin name = IO_L24N_1/LDC2, Type = DUAL, Sch name = DP
|
| 109 |
|
|
|
| 110 |
|
|
NET "an<0>" LOC = "F17"; # Bank = 1, Pin name = IO_L19N_1, Type = I/O, Sch name = AN0
|
| 111 |
|
|
NET "an<1>" LOC = "H17"; # Bank = 1, Pin name = IO_L16N_1/A0, Type = DUAL, Sch name = AN1
|
| 112 |
|
|
NET "an<2>" LOC = "C18"; # Bank = 1, Pin name = IO_L24P_1/LDC1, Type = DUAL, Sch name = AN2
|
| 113 |
|
|
NET "an<3>" LOC = "F15"; # Bank = 1, Pin name = IO_L21P_1, Type = I/O, Sch name = AN3
|
| 114 |
|
|
|
| 115 |
|
|
# Leds
|
| 116 |
|
|
NET "Led<0>" LOC = "J14"; # Bank = 1, Pin name = IO_L14N_1/A3/RHCLK7, Type = RHCLK/DUAL, Sch name = JD10/LD0
|
| 117 |
|
|
NET "Led<1>" LOC = "J15"; # Bank = 1, Pin name = IO_L14P_1/A4/RHCLK6, Type = RHCLK/DUAL, Sch name = JD9/LD1
|
| 118 |
|
|
NET "Led<2>" LOC = "K15"; # Bank = 1, Pin name = IO_L12P_1/A8/RHCLK2, Type = RHCLK/DUAL, Sch name = JD8/LD2
|
| 119 |
|
|
NET "Led<3>" LOC = "K14"; # Bank = 1, Pin name = IO_L12N_1/A7/RHCLK3/TRDY1, Type = RHCLK/DUAL, Sch name = JD7/LD3
|
| 120 |
|
|
NET "Led<4>" LOC = "E17"; # Bank = 1, Pin name = IO, Type = I/O, Sch name = LD4? s3e500 only
|
| 121 |
|
|
NET "Led<5>" LOC = "P15"; # Bank = 1, Pin name = IO, Type = I/O, Sch name = LD5? s3e500 only
|
| 122 |
|
|
NET "Led<6>" LOC = "F4"; # Bank = 3, Pin name = IO, Type = I/O, Sch name = LD6? s3e500 only
|
| 123 |
|
|
NET "Led<7>" LOC = "R4"; # Bank = 3, Pin name = IO/VREF_3, Type = VREF, Sch name = LD7? s3e500 only
|
| 124 |
|
|
#NET "Led<4>" LOC = "E16"; # Bank = 1, Pin name = N.C., Type = N.C., Sch name = LD4? other than s3e500
|
| 125 |
|
|
#NET "Led<5>" LOC = "P16"; # Bank = 1, Pin name = N.C., Type = N.C., Sch name = LD5? other than s3e500
|
| 126 |
|
|
#NET "Led<6>" LOC = "E4"; # Bank = 3, Pin name = N.C., Type = N.C., Sch name = LD6? other than s3e500
|
| 127 |
|
|
#NET "Led<7>" LOC = "P4"; # Bank = 3, Pin name = N.C., Type = N.C., Sch name = LD7? other than s3e500
|
| 128 |
|
|
|
| 129 |
|
|
# Switches
|
| 130 |
|
|
NET "sw<0>" LOC = "G18"; # Bank = 1, Pin name = IP, Type = INPUT, Sch name = SW0
|
| 131 |
|
|
NET "sw<1>" LOC = "H18"; # Bank = 1, Pin name = IP/VREF_1, Type = VREF, Sch name = SW1
|
| 132 |
|
|
NET "sw<2>" LOC = "K18"; # Bank = 1, Pin name = IP, Type = INPUT, Sch name = SW2
|
| 133 |
|
|
NET "sw<3>" LOC = "K17"; # Bank = 1, Pin name = IP, Type = INPUT, Sch name = SW3
|
| 134 |
|
|
NET "sw<4>" LOC = "L14"; # Bank = 1, Pin name = IP, Type = INPUT, Sch name = SW4
|
| 135 |
|
|
NET "sw<5>" LOC = "L13"; # Bank = 1, Pin name = IP, Type = INPUT, Sch name = SW5
|
| 136 |
|
|
NET "sw<6>" LOC = "N17"; # Bank = 1, Pin name = IP, Type = INPUT, Sch name = SW6
|
| 137 |
|
|
NET "sw<7>" LOC = "R17"; # Bank = 1, Pin name = IP, Type = INPUT, Sch name = SW7
|
| 138 |
|
|
|
| 139 |
|
|
# Buttons
|
| 140 |
|
|
|
| 141 |
|
|
NET "btn<0>" LOC = "B18"; # Bank = 1, Pin name = IP, Type = INPUT, Sch name = BTN0
|
| 142 |
|
|
NET "btn<1>" LOC = "D18"; # Bank = 1, Pin name = IP/VREF_1, Type = VREF, Sch name = BTN1
|
| 143 |
|
|
NET "btn<2>" LOC = "E18"; # Bank = 1, Pin name = IP, Type = INPUT, Sch name = BTN2
|
| 144 |
|
|
NET "btn<3>" LOC = "H13"; # Bank = 1, Pin name = IP, Type = INPUT, Sch name = BTN3
|
| 145 |
|
|
|
| 146 |
|
|
# VGA Connector
|
| 147 |
|
|
NET "vgaRed<1>" LOC = "R9"; # Bank = 2, Pin name = IO/D5, Type = DUAL, Sch name = RED0
|
| 148 |
|
|
NET "vgaRed<2>" LOC = "T8"; # Bank = 2, Pin name = IO_L10N_2, Type = I/O, Sch name = RED1
|
| 149 |
|
|
NET "vgaRed<3>" LOC = "R8"; # Bank = 2, Pin name = IO_L10P_2, Type = I/O, Sch name = RED2
|
| 150 |
|
|
NET "vgaGreen<1>" LOC = "N8"; # Bank = 2, Pin name = IO_L09N_2, Type = I/O, Sch name = GRN0
|
| 151 |
|
|
NET "vgaGreen<2>" LOC = "P8"; # Bank = 2, Pin name = IO_L09P_2, Type = I/O, Sch name = GRN1
|
| 152 |
|
|
NET "vgaGreen<3>" LOC = "P6"; # Bank = 2, Pin name = IO_L05N_2, Type = I/O, Sch name = GRN2
|
| 153 |
|
|
NET "vgaBlue<2>" LOC = "U5"; # Bank = 2, Pin name = IO/VREF_2, Type = VREF, Sch name = BLU1
|
| 154 |
|
|
NET "vgaBlue<3>" LOC = "U4"; # Bank = 2, Pin name = IO_L03P_2/DOUT/BUSY, Type = DUAL, Sch name = BLU2
|
| 155 |
|
|
|
| 156 |
|
|
NET "Hsync" LOC = "T4"; # Bank = 2, Pin name = IO_L03N_2/MOSI/CSI_B, Type = DUAL, Sch name = HSYNC
|
| 157 |
|
|
NET "Vsync" LOC = "U3"; # Bank = 2, Pin name = IO_L01P_2/CSO_B, Type = DUAL, Sch name = VSYNC
|
| 158 |
|
|
|
| 159 |
|
|
# PS/2 connector
|
| 160 |
|
|
NET "PS2C" LOC = "R12"; # Bank = 2, Pin name = IO_L20N_2, Type = I/O, Sch name = PS2C
|
| 161 |
|
|
NET "PS2D" LOC = "P11"; # Bank = 2, Pin name = IO_L18P_2, Type = I/O, Sch name = PS2D
|
| 162 |
|
|
|
| 163 |
|
|
# FX2 connector
|
| 164 |
|
|
NET "PIO<0>" LOC = "B4"; # Bank = 0, Pin name = IO_L24N_0, Type = I/O, Sch name = R-IO1
|
| 165 |
|
|
NET "PIO<1>" LOC = "A4"; # Bank = 0, Pin name = IO_L24P_0, Type = I/O, Sch name = R-IO2
|
| 166 |
|
|
NET "PIO<2>" LOC = "C3"; # Bank = 0, Pin name = IO_L25P_0, Type = I/O, Sch name = R-IO3
|
| 167 |
|
|
NET "PIO<3>" LOC = "C4"; # Bank = 0, Pin name = IO, Type = I/O, Sch name = R-IO4
|
| 168 |
|
|
NET "PIO<4>" LOC = "B6"; # Bank = 0, Pin name = IO_L20P_0, Type = I/O, Sch name = R-IO5
|
| 169 |
|
|
NET "PIO<5>" LOC = "D5"; # Bank = 0, Pin name = IO_L23N_0/VREF_0, Type = VREF, Sch name = R-IO6
|
| 170 |
|
|
NET "PIO<6>" LOC = "C5"; # Bank = 0, Pin name = IO_L23P_0, Type = I/O, Sch name = R-IO7
|
| 171 |
|
|
NET "PIO<7>" LOC = "F7"; # Bank = 0, Pin name = IO_L19P_0, Type = I/O, Sch name = R-IO8
|
| 172 |
|
|
NET "PIO<8>" LOC = "E7"; # Bank = 0, Pin name = IO_L19N_0/VREF_0, Type = VREF, Sch name = R-IO9
|
| 173 |
|
|
NET "PIO<9>" LOC = "A6"; # Bank = 0, Pin name = IO_L20N_0, Type = I/O, Sch name = R-IO10
|
| 174 |
|
|
NET "PIO<10>" LOC = "C7"; # Bank = 0, Pin name = IO_L18P_0, Type = I/O, Sch name = R-IO11
|
| 175 |
|
|
NET "PIO<11>" LOC = "F8"; # Bank = 0, Pin name = IO_L17N_0, Type = I/O, Sch name = R-IO12
|
| 176 |
|
|
NET "PIO<12>" LOC = "D7"; # Bank = 0, Pin name = IO_L18N_0/VREF_0, Type = VREF, Sch name = R-IO13
|
| 177 |
|
|
NET "PIO<13>" LOC = "E8"; # Bank = 0, Pin name = IO_L17P_0, Type = I/O, Sch name = R-IO14
|
| 178 |
|
|
NET "PIO<14>" LOC = "E9"; # Bank = 0, Pin name = IO_L15P_0, Type = I/O, Sch name = R-IO15
|
| 179 |
|
|
NET "PIO<15>" LOC = "C9"; # Bank = 0, Pin name = IO_L14P_0/GCLK10, Type = GCLK, Sch name = R-IO16
|
| 180 |
|
|
NET "PIO<16>" LOC = "A8"; # Bank = 0, Pin name = IO, Type = I/O, Sch name = R-IO17
|
| 181 |
|
|
NET "PIO<17>" LOC = "G9"; # Bank = 0, Pin name = IO, Type = I/O, Sch name = R-IO18
|
| 182 |
|
|
NET "PIO<18>" LOC = "F9"; # Bank = 0, Pin name = IO_L15N_0, Type = I/O, Sch name = R-IO19
|
| 183 |
|
|
NET "PIO<19>" LOC = "D10"; # Bank = 0, Pin name = IO_L11P_0/GCLK4, Type = GCLK, Sch name = R-IO20
|
| 184 |
|
|
NET "PIO<20>" LOC = "A10"; # Bank = 0, Pin name = IO_L12N_0/GCLK7, Type = GCLK, Sch name = R-IO21
|
| 185 |
|
|
NET "PIO<21>" LOC = "B10"; # Bank = 0, Pin name = IO_L12P_0/GCLK6, Type = GCLK, Sch name = R-IO22
|
| 186 |
|
|
NET "PIO<22>" LOC = "A11"; # Bank = 0, Pin name = IO, Type = I/O, Sch name = R-IO23
|
| 187 |
|
|
NET "PIO<23>" LOC = "D11"; # Bank = 0, Pin name = IO_L09N_0, Type = I/O, Sch name = R-IO24
|
| 188 |
|
|
NET "PIO<24>" LOC = "E10"; # Bank = 0, Pin name = IO_L11N_0/GCLK5, Type = GCLK, Sch name = R-IO25
|
| 189 |
|
|
NET "PIO<25>" LOC = "B11"; # Bank = 0, Pin name = IO/VREF_0, Type = VREF, Sch name = R-IO26
|
| 190 |
|
|
NET "PIO<26>" LOC = "C11"; # Bank = 0, Pin name = IO_L09P_0, Type = I/O, Sch name = R-IO27
|
| 191 |
|
|
NET "PIO<27>" LOC = "E11"; # Bank = 0, Pin name = IO_L08P_0, Type = I/O, Sch name = R-IO28
|
| 192 |
|
|
NET "PIO<28>" LOC = "F11"; # Bank = 0, Pin name = IO_L08N_0, Type = I/O, Sch name = R-IO29
|
| 193 |
|
|
NET "PIO<29>" LOC = "E12"; # Bank = 0, Pin name = IO_L06N_0, Type = I/O, Sch name = R-IO30
|
| 194 |
|
|
NET "PIO<30>" LOC = "F12"; # Bank = 0, Pin name = IO_L06P_0, Type = I/O, Sch name = R-IO31
|
| 195 |
|
|
NET "PIO<31>" LOC = "A13"; # Bank = 0, Pin name = IO_L05P_0, Type = I/O, Sch name = R-IO32
|
| 196 |
|
|
NET "PIO<32>" LOC = "B13"; # Bank = 0, Pin name = IO_L05N_0/VREF_0, Type = VREF, Sch name = R-IO33
|
| 197 |
|
|
NET "PIO<33>" LOC = "E13"; # Bank = 0, Pin name = IO, Type = I/O, Sch name = R-IO34
|
| 198 |
|
|
NET "PIO<34>" LOC = "A14"; # Bank = 0, Pin name = IO_L04N_0, Type = I/O, Sch name = R-IO35
|
| 199 |
|
|
NET "PIO<35>" LOC = "C14"; # Bank = 0, Pin name = IO_L03N_0/VREF_0, Type = VREF, Sch name = R-IO36
|
| 200 |
|
|
NET "PIO<36>" LOC = "D14"; # Bank = 0, Pin name = IO_L03P_0, Type = I/O, Sch name = R-IO37
|
| 201 |
|
|
NET "PIO<37>" LOC = "B14"; # Bank = 0, Pin name = IO_L04P_0, Type = I/O, Sch name = R-IO38
|
| 202 |
|
|
NET "PIO<38>" LOC = "A16"; # Bank = 0, Pin name = IO_L01N_0, Type = I/O, Sch name = R-IO39
|
| 203 |
|
|
NET "PIO<39>" LOC = "B16"; # Bank = 0, Pin name = IO_L01P_0, Type = I/O, Sch name = R-IO40
|
| 204 |
|
|
|
| 205 |
|
|
# 12 pin connectors
|
| 206 |
|
|
NET "JA<0>" LOC = "L15"; # Bank = 1, Pin name = IO_L09N_1/A11, Type = DUAL, Sch name = JA1
|
| 207 |
|
|
NET "JA<1>" LOC = "K12"; # Bank = 1, Pin name = IO_L11N_1/A9/RHCLK1, Type = RHCLK/DUAL, Sch name = JA2
|
| 208 |
|
|
NET "JA<2>" LOC = "L17"; # Bank = 1, Pin name = IO_L10N_1/VREF_1, Type = VREF, Sch name = JA3
|
| 209 |
|
|
NET "JA<3>" LOC = "M15"; # Bank = 1, Pin name = IO_L07P_1, Type = I/O, Sch name = JA4
|
| 210 |
|
|
NET "JA<4>" LOC = "K13"; # Bank = 1, Pin name = IO_L11P_1/A10/RHCLK0, Type = RHCLK/DUAL, Sch name = JA7
|
| 211 |
|
|
NET "JA<5>" LOC = "L16"; # Bank = 1, Pin name = IO_L09P_1/A12, Type = DUAL, Sch name = JA8
|
| 212 |
|
|
NET "JA<6>" LOC = "M14"; # Bank = 1, Pin name = IO_L05P_1, Type = I/O, Sch name = JA9
|
| 213 |
|
|
NET "JA<7>" LOC = "M16"; # Bank = 1, Pin name = IO_L07N_1, Type = I/O, Sch name = JA10
|
| 214 |
|
|
NET "JB<0>" LOC = "M13"; # Bank = 1, Pin name = IO_L05N_1/VREF_1, Type = VREF, Sch name = JB1
|
| 215 |
|
|
NET "JB<1>" LOC = "R18"; # Bank = 1, Pin name = IO_L02P_1/A14, Type = DUAL, Sch name = JB2
|
| 216 |
|
|
NET "JB<2>" LOC = "R15"; # Bank = 1, Pin name = IO_L03P_1, Type = I/O, Sch name = JB3
|
| 217 |
|
|
NET "JB<3>" LOC = "T17"; # Bank = 1, Pin name = IO_L01N_1/A15, Type = DUAL, Sch name = JB4
|
| 218 |
|
|
NET "JB<4>" LOC = "P17"; # Bank = 1, Pin name = IO_L06P_1, Type = I/O, Sch name = JB7
|
| 219 |
|
|
NET "JB<5>" LOC = "R16"; # Bank = 1, Pin name = IO_L03N_1/VREF_1, Type = VREF, Sch name = JB8
|
| 220 |
|
|
NET "JB<6>" LOC = "T18"; # Bank = 1, Pin name = IO_L02N_1/A13, Type = DUAL, Sch name = JB9
|
| 221 |
|
|
NET "JB<7>" LOC = "U18"; # Bank = 1, Pin name = IO_L01P_1/A16, Type = DUAL, Sch name = JB10
|
| 222 |
|
|
NET "JC<0>" LOC = "G15"; # Bank = 1, Pin name = IO_L18P_1, Type = I/O, Sch name = JC1
|
| 223 |
|
|
NET "JC<1>" LOC = "J16"; # Bank = 1, Pin name = IO_L13N_1/A5/RHCLK5, Type = RHCLK/DUAL, Sch name = JC2
|
| 224 |
|
|
NET "JC<2>" LOC = "G13"; # Bank = 1, Pin name = IO_L20N_1, Type = I/O, Sch name = JC3
|
| 225 |
|
|
NET "JC<3>" LOC = "H16"; # Bank = 1, Pin name = IO_L16P_1, Type = I/O, Sch name = JC4
|
| 226 |
|
|
NET "JC<4>" LOC = "H15"; # Bank = 1, Pin name = IO_L17N_1, Type = I/O, Sch name = JC7
|
| 227 |
|
|
NET "JC<5>" LOC = "F14"; # Bank = 1, Pin name = IO_L21N_1, Type = I/O, Sch name = JC8
|
| 228 |
|
|
NET "JC<6>" LOC = "G16"; # Bank = 1, Pin name = IO_L18N_1, Type = I/O, Sch name = JC9
|
| 229 |
|
|
NET "JC<7>" LOC = "J12"; # Bank = 1, Pin name = IO_L15P_1/A2, Type = DUAL, Sch name = JC10
|
| 230 |
|
|
NET "JD<0>" LOC = "J13"; # Bank = 1, Pin name = IO_L15N_1/A1, Type = DUAL, Sch name = JD1
|
| 231 |
|
|
NET "JD<1>" LOC = "M18"; # Bank = 1, Pin name = IO_L08N_1, Type = I/O, Sch name = JD2
|
| 232 |
|
|
NET "JD<2>" LOC = "N18"; # Bank = 1, Pin name = IO_L08P_1, Type = I/O, Sch name = JD3
|
| 233 |
|
|
NET "JD<3>" LOC = "P18"; # Bank = 1, Pin name = IO_L06N_1, Type = I/O, Sch name = JD4
|
| 234 |
|
|
|
| 235 |
|
|
# RS232 connector
|
| 236 |
|
|
NET "RsRx" LOC = "U6"; # Bank = 2, Pin name = IP, Type = INPUT, Sch name = RS-RX
|
| 237 |
|
|
NET "RsTx" LOC = "P9"; # Bank = 2, Pin name = IO, Type = I/O, Sch name = RS-TX
|
