URL https://opencores.org/ocsvn/m32632/m32632/trunk

Subversion Repositories m32632

[/] [m32632/] [trunk/] [TRIPUTER/] [monitor.32K] - Blame information for rev 41

Go to most recent revision | Details | Compare with Previous | View Log


; MONITOR for TRIPUTER V0.1
; 27 May 2017
sramsize  .equ x'8000
 
        movd x'20000010,r0
        jump r0
 
        .align 16
        movd x'20400000,r1      ; address of LEDs
        movqd 0,0(r1)           ; all went off
        movd x'FFFF,4(r1)               ; the seven segment went off
        lprd cfg,x'BF6
        lprd sp,x'300
        lprd intbase,x'300
        addr nmi,@x'304
        movd x'20200000,r7      ; UART - fix Register
        addr welcome,r0
        bsr string
; SRAM-Test : Bit Test
        movqw 1,r2
        movd x'20100000,r3
l01:    movw r2,0(r3)           ; write
        addqd 2,r3
        addw r2,r2
        cmpqw 0,r2
        bne l01
        movqw 1,r2
        movqw 0,r3
l02:  cmpw 0(r3),r2             ; read
        bne err
        addqd 2,r3
        addw r2,r2
        cmpqw 0,r2
        bne l02
        movl datfp,-15(r3)
        cmpl datfp,-15(r3)
        bne err
; Address steping
        movd x'20100000,r3
        movd x'20000,r2         ; Initialize on 0
l03:    movqd 0,0(r3)
        addqd 4,r3
        acbd -1,r2,l03
        movd x'20100000,r3      ; Test of 0 and 1 write
        movd x'40000,r2
l04:    cmpqw 0,0(r3)
        bne err
        movqw -1,0(r3)
        addqd 2,r3
        acbd -1,r2,l04
        movd x'20100000,r3      ; Test on 1 and 0 write
        movd x'40000,r2
l05:    cmpqw -1,0(r3)
        bne err
        movqw 0,0(r3)
        addqd 2,r3
        acbd -1,r2,l05
        movd x'20100000,r3      ; Test on 0
        movd x'40000,r2
l06:    cmpqw 0,0(r3)
        bne err
        addqd 2,r3
        acbd -1,r2,l06
        addr sram_ok,r0
        bsr string
; INT vector points to SRAM
        movd x'20100300,r3
        addr nmi,4(r3)
        addr int,0(r3)
        lprd intbase,r3
        lprd sp,x'20100300
        lprd sb,x'20100400      ; working area
        movqd 0,-4(sb)          ; counter in NMI
        sbitb 31,x'300004(r7)   ; NMI enable
; iDRAM-Test : Bit Test
        movqd 1,r2
        movqd 0,r3
l21:    movd r2,0(r3)           ; write
        addqd 4,r3
        addd r2,r2
        cmpqd 0,r2
        bne l21
        movqd 1,r2
        movqd 0,r3
l22:  cmpd 0(r3),r2             ; read
        bne err
        addqd 4,r3
        addd r2,r2
        cmpqd 0,r2
        bne l22
        movl datfp,-15(r3)
        cmpl datfp,-15(r3)
        bne err
; Address stepping
        movqd 0,r3
        movw sramsize,r2                ; Initialize to 0
l23:    movqd 0,0(r3)
        addqd 4,r3
        acbw -1,r2,l23
        movqd 0,r3                      ; Test on 0 and 1 write
        movw sramsize,r2
l24:    cmpqd 0,0(r3)
        bne err
        movqd -1,0(r3)
        addqd 4,r3
        acbw -1,r2,l24
        movqd 0,r3                      ; Test on 1 und 0 write
        movd sramsize,r2
l25:    cmpqd -1,0(r3)
        bne err
        movqd 0,0(r3)
        addqd 4,r3
        acbw -1,r2,l25
        movqd 0,r3                      ; Test on 0
        movw sramsize,r2
l26:    cmpqd 0,0(r3)
        bne err
        addqd 4,r3
        acbw -1,r2,l26
; Now all Data right initialize
        movd x'300,r0
        lprd sp,r0
        lprd sb,x'400           ; working area
        addr int,0(r0)
        addr nmi,4(r0)
        lprd intbase,r0
        movqd 0,-8(sb)          ; readpointer of RX buffer
        movqd 0,-12(sb)         ; writepointer of RX buffer
        movqb 0,-4(sb)          ; count byte for NMI
        movqd 0,-20(sb)         ; pointer for Dump
        addr idram_ok,r0
        bsr string
        bispsrw x'800           ; Int enable
        sbitb 9,0(r7)           ; UART RX Int on
        addr string,-24(sb)     ; save address of string service routine
; ***************************************************************
; Endless loop : wait on Input from UART
; ***************************************************************
new:    movd x'20240002,-2(sb)
        sprd sb,r0
        bsr string
        movqd 0,-16(sb)         ; Number of characters in buffer
loop:   wait
        cmpd -8(sb),-12(sb)     ; has the UART something received?
        beq loop                        ; No
; Auswertung
        movd -8(sb),r1
        movb x'100(sb)[r1:b],r0
        addqb 1,-8(sb)
        checkb r1,cvalid,r0     ; special character ?
        bfs sys1                        ; Yes
        movd -16(sb),r1
        cmpqd 0,r1
        bne sys2
        cmpb '+',r0
        beq sys3
        cmpb '-',r0
        beq sys4
sys2:   movb r0,0(sb)[r1:b]
        addr 1(r1),-16(sb)
sys0:   bsr out
        br loop
sys1:   cmpb 8,r0                       ; Delete
        bne sys5
        cmpqd 0,-16(sb)
        beq loop
        addqd -1,-16(sb)
        bsr out
        movb ' ',r0
        bsr out
        movb 8,r0
        br sys0
sys5:   cmpb 13,r0                      ; CR only output
        beq sys0
        cmpb 10,r0                      ; LF now analyzing input
        bne new
; Analyzing input:
        bsr out
        sprd sb,r2
        movd -16(sb),r1         ; Number of characters in buffer
sys7:   cmpqd 0,r1
        beq new
        movb 0(r2),r0
        addqd 1,r2
        addqd -1,r1
        cmpb ' ',r0
        beq sys7                        ; next character
        bicb x'20,r0            ; only capital letters
        movqd 0,r6
        cmpb 'L',r0                     ; "Load"
        beq sys6
        movqd 1,r6
        cmpb 'R',r0                     ; "Run"
        beq sys6
        movqd 2,r6
        cmpb 'D',r0                     ; "Dump"
        beq sys6
        br erin                 ; Error in input
; now look for ' ' and address input
sys6: cmpqd 0,r1
        beq erin                        ; no input any more
        cmpb ' ',0(r2)
        addqd 1,r2
        addqd -1,r1
        bne sys6
; now look for characters
sys8:   cmpqd 0,r1
        beq erin
        cmpb ' ',0(r2)
        addqd 1,r2
        addqd -1,r1
        beq sys8
; Addresse build
        movqd 0,r4
sy10:   movb -1(r2),r3
        checkb r5,cziff,r3
        bfc sy11
        bicb x'20,r3
        checkb r5,cabc,r3
        bfs erin                        ; illegal character -> Abort
        addb 10,r5
sy11:   ashd 4,r4
        orb r5,r4
        cmpqd 0,r1
        beq sys9
        addqd 1,r2
        addqd -1,r1
        br sy10
; Now execute ...
        .align 4
sys9: casew sy12[r6:w]
sy12:   .word syld-sys9
        .word sygo-sys9
        .word sydu-sys9
; Program Call
sygo:   jsr r4
        movd x'20200000,r7
        br new
; make Dump , R4 is pointer
sys4:   subd 512,-20(sb)
sys3:   movd -20(sb),r4
        movb 13,r0                      ; make CR before
        bsr out
sydu:   movb 16,r5                      ; Number of Lines
sy18:   sprd sb,r0                      ; Pointer to String
        movzbd 28,r1
sy13:   extd r1,r4,r2,4
        movb datah[r2:b],0(r0)
        addqd 1,r0
        addqb -4,r1
        cmpqb -4,r1
        bne sy13
        movb 16,r6
sy15:   movb ' ',0(r0)
        addqd 1,r0
        addr -1(r6),r2
        andb 3,r2
        cmpqb 3,r2
        bne sy14
        movb ' ',0(r0)
        addqd 1,r0
sy14: extsd 0(r4),r2,4,4
        movb datah[r2:b],0(r0)
        extsd 0(r4),r2,0,4
        movb datah[r2:b],1(r0)
        addqd 2,r0
        addqd 1,r4
        acbb -1,r6,sy15
        movw x'2720,0(r0)
        addqd 2,r0
        addr -16(r4),r4
        movb 16,r6
sy16:   movb 0(r4),r2
        checkb r1,cvalid,r2
        bfc sy17
        movb '.',r2
sy17:   movb r2,0(r0)
        addqd 1,r0
        addqd 1,r4
        acbb -1,r6,sy16
        movd x'0A0D27,0(r0)
        addqd 3,r0
        movzbw r0,-2(sb)
        sprd sb,r0
        bsr string
        acbb -1,r5,sy18
        movd r4,-20(sb)
        br new
; Example:
; ":200000006DA60BF757A000000C80CF0F00D7A1FFFFFE00D4A315165C7810D4A30D185C7800"
; ":007FE001A0"
; R4 pointer to memory
; R5 "0" counter
syld:   movqd 0,r5
sy23:   bsr getchar
        cmpb ':',r0
        bne abort                       ; Abort if not ':' - what happens after this don't care
        movqd 0,r6                      ; Checksum=0
        bsr getbyte
        cmpqb 0,r0
        beq sy19                        ; End
        movb r0,r1
        bsr getbyte
        movzbd r0,r2
        lshd 8,r2
        bsr getbyte
        movb r0,r2
        bsr getbyte
        cmpqb 0,r0
        bne abort                       ; if not 0 - Abort. Limited to 64K
sy20:   bsr getbyte
        movb r0,r4[r2:b]
        addqd 1,r2
        addqd 1,r5
        acbb -1,r1,sy20
        bsr getbyte
        cmpqd 0,r6
        bne abort
sy21:   bsr getchar                     ; CR and LF read
        cmpb 10,r0                      ; there are Files without CR !
        bne sy21
; show how many load up to now R2 -> decimal
        movd 10000,r0
        addr 1(sb),r3
        movd x'D0006,-2(sb)
        movd r5,r2
sy22:   movd r2,r1
        divd r0,r1
        orb x'30,r1
        movb r1,0(r3)
        addqd 1,r3
        modd r0,r2
        divd 10,r0
        cmpqd 0,r0
        bne sy22
        sprd sb,r0
        bsr string
        br sy23
; ******* Load finished *******
sy19: movqb 4,r1
sy24:   bsr getbyte
        acbb -1,r1,sy24
        cmpqd 0,r6
        bne abort
sy25:   bsr getchar                     ; CR and LF read
        cmpb 10,r0
        bne sy25
        addr crlf,r0
sy26:   bsr string
        br new
 
erin:   addr erinfo,r0
        br sy26
 
getchar:
        save [r1]
gec1:   cmpd -8(sb),-12(sb)
        beq gec1
        movd -8(sb),r1
        movb x'100(sb)[r1:b],r0
        addqb 1,-8(sb)
        restore [r1]
        ret 0
 
getbyte:
        save [r1,r2]
        bsr getchar
        checkb r1,cziff,r0
        bfc geb1
        bicb x'20,r0
        checkb r1,cabc,r0
        bfc geb2
        orw x'A00,r6
geb2:   addb 10,r1
geb1:   ashd 4,r1
        bsr getchar
        checkb r2,cziff,r0
        bfc geb3
        bicb x'20,r0
        checkb r2,cabc,r0
        bfc geb4
        orw x'A00,r6
geb4:   addb 10,r2
geb3:   orb r2,r1
        addb r1,r6                      ; add to Checksum
        movb r1,r0
        restore [r1,r2]
        ret 0
 
abort:
        addr lderr,r0
        bsr string
        br new
 
out:    tbitb 11,0(r7)
        bfs out
        movb r0,0(r7)
        ret 0
 
string:
        save [r1,r7]
        movd x'20200000,r7
        movw -2(r0),r1
st3:    cmpqw 0,r1
        beq st1
st2:    tbitb 11,0(r7)
        bfs st2
        movb 0(r0),0(r7)
        addqd 1,r0
        acbw -1,r1,st2
st1:    restore [r1,r7]
        ret 0
 
datal:  ; 0     1    2    3    4    5    6    7    8    9    A    B    C    D    E    F
 .byte x'3F,6,x'5B,x'4F,x'66,x'6D,x'7D,x'07,x'7F,x'6F,x'77,x'7C,x'39,x'5E,x'79,x'71
 
datah: .byte '0123456789ABCDEF'
 
        .align 4
datfp:  .double x'87654321,x'0FEDCBA9
cvalid: .byte x'7E,x'20
cziff:  .byte '90'
cabc:           .byte 'FA'
 
                .word txt_1-sram_ok
sram_ok:        .byte '512K SRAM ok.',13,10
txt_1:  .word txt_2-welcome
welcome:        .byte 13,10,'Hardware: TRIPUTER V0.1 , 27 May 2017'
                .byte 13,10,'Software: MONITOR  V0.1 , 27 May 2017',13,10
txt_2:  .word txt_3-idram_ok
idram_ok:       .byte '128K iDRAM ok.',13,10
txt_3:  .word txt_4-error
error:  .byte 'Memory Fault !!!',13,10
txt_4:  .word txt_6-lderr
lderr:  .byte 13,10,'Error in Load!',13,10
txt_6:  .word txt_7-crlf
crlf:           .byte 13,10
txt_7:  .word txt_8-erinfo
erinfo: .byte 'Error in input!',13,10
txt_8:
 
        .align 4
nmi:    save [r0,r1]
        movb -4(sb),r0
        extsd r0,r1,0,4
        comb datal[r1:b],x'200004(r7)
        extsd r0,r1,4,4
        comb datal[r1:b],x'200005(r7)
        bispsrb 1
        addpb 0,r0
        cmpb x'60,r0
        beq nmi1
nmi2:   movb r0,-4(sb)
        restore [r0,r1]
        rett 0
nmi1:   movqb 0,r0
        br nmi2
 
        .align 4
int:    save [r0]               ; RX UART
        movd -12(sb),r0
        movb 0(r7),x'100(sb)[r0:b]
        addqb 1,-12(sb)
        movb x'100(sb)[r0:b],x'200000(r7)
        movb r0,x'200002(r7)
        restore [r0]
        reti
 
err:    addr error,r0
        bsr string
err1:   comw x'4040,4(r1)       ; 0 = leuchten
        br err1
 

Browse

Tools

Subversion Repositories m32632

[/] [m32632/] [trunk/] [TRIPUTER/] [monitor.32K] - Blame information for rev 41

Line No.	Rev	Author	Line
1	35	ns32kum	`; MONITOR for TRIPUTER V0.1`
2			`; 27 May 2017`
3			`sramsize .equ x'8000`
4
5			`movd x'20000010,r0`
6			`jump r0`
7
8			`.align 16`
9			`movd x'20400000,r1 ; address of LEDs`
10			`movqd 0,0(r1) ; all went off`
11			`movd x'FFFF,4(r1) ; the seven segment went off`
12			`lprd cfg,x'BF6`
13			`lprd sp,x'300`
14			`lprd intbase,x'300`
15			`addr nmi,@x'304`
16			`movd x'20200000,r7 ; UART - fix Register`
17			`addr welcome,r0`
18			`bsr string`
19			`; SRAM-Test : Bit Test`
20			`movqw 1,r2`
21			`movd x'20100000,r3`
22			`l01: movw r2,0(r3) ; write`
23			`addqd 2,r3`
24			`addw r2,r2`
25			`cmpqw 0,r2`
26			`bne l01`
27			`movqw 1,r2`
28			`movqw 0,r3`
29			`l02: cmpw 0(r3),r2 ; read`
30			`bne err`
31			`addqd 2,r3`
32			`addw r2,r2`
33			`cmpqw 0,r2`
34			`bne l02`
35			`movl datfp,-15(r3)`
36			`cmpl datfp,-15(r3)`
37			`bne err`
38			`; Address steping`
39			`movd x'20100000,r3`
40			`movd x'20000,r2 ; Initialize on 0`
41			`l03: movqd 0,0(r3)`
42			`addqd 4,r3`
43			`acbd -1,r2,l03`
44			`movd x'20100000,r3 ; Test of 0 and 1 write`
45			`movd x'40000,r2`
46			`l04: cmpqw 0,0(r3)`
47			`bne err`
48			`movqw -1,0(r3)`
49			`addqd 2,r3`
50			`acbd -1,r2,l04`
51			`movd x'20100000,r3 ; Test on 1 and 0 write`
52			`movd x'40000,r2`
53			`l05: cmpqw -1,0(r3)`
54			`bne err`
55			`movqw 0,0(r3)`
56			`addqd 2,r3`
57			`acbd -1,r2,l05`
58			`movd x'20100000,r3 ; Test on 0`
59			`movd x'40000,r2`
60			`l06: cmpqw 0,0(r3)`
61			`bne err`
62			`addqd 2,r3`
63			`acbd -1,r2,l06`
64			`addr sram_ok,r0`
65			`bsr string`
66			`; INT vector points to SRAM`
67			`movd x'20100300,r3`
68			`addr nmi,4(r3)`
69			`addr int,0(r3)`
70			`lprd intbase,r3`
71			`lprd sp,x'20100300`
72			`lprd sb,x'20100400 ; working area`
73			`movqd 0,-4(sb) ; counter in NMI`
74			`sbitb 31,x'300004(r7) ; NMI enable`
75			`; iDRAM-Test : Bit Test`
76			`movqd 1,r2`
77			`movqd 0,r3`
78			`l21: movd r2,0(r3) ; write`
79			`addqd 4,r3`
80			`addd r2,r2`
81			`cmpqd 0,r2`
82			`bne l21`
83			`movqd 1,r2`
84			`movqd 0,r3`
85			`l22: cmpd 0(r3),r2 ; read`
86			`bne err`
87			`addqd 4,r3`
88			`addd r2,r2`
89			`cmpqd 0,r2`
90			`bne l22`
91			`movl datfp,-15(r3)`
92			`cmpl datfp,-15(r3)`
93			`bne err`
94			`; Address stepping`
95			`movqd 0,r3`
96			`movw sramsize,r2 ; Initialize to 0`
97			`l23: movqd 0,0(r3)`
98			`addqd 4,r3`
99			`acbw -1,r2,l23`
100			`movqd 0,r3 ; Test on 0 and 1 write`
101			`movw sramsize,r2`
102			`l24: cmpqd 0,0(r3)`
103			`bne err`
104			`movqd -1,0(r3)`
105			`addqd 4,r3`
106			`acbw -1,r2,l24`
107			`movqd 0,r3 ; Test on 1 und 0 write`
108			`movd sramsize,r2`
109			`l25: cmpqd -1,0(r3)`
110			`bne err`
111			`movqd 0,0(r3)`
112			`addqd 4,r3`
113			`acbw -1,r2,l25`
114			`movqd 0,r3 ; Test on 0`
115			`movw sramsize,r2`
116			`l26: cmpqd 0,0(r3)`
117			`bne err`
118			`addqd 4,r3`
119			`acbw -1,r2,l26`
120			`; Now all Data right initialize`
121			`movd x'300,r0`
122			`lprd sp,r0`
123			`lprd sb,x'400 ; working area`
124			`addr int,0(r0)`
125			`addr nmi,4(r0)`
126			`lprd intbase,r0`
127			`movqd 0,-8(sb) ; readpointer of RX buffer`
128			`movqd 0,-12(sb) ; writepointer of RX buffer`
129			`movqb 0,-4(sb) ; count byte for NMI`
130			`movqd 0,-20(sb) ; pointer for Dump`
131			`addr idram_ok,r0`
132			`bsr string`
133			`bispsrw x'800 ; Int enable`
134			`sbitb 9,0(r7) ; UART RX Int on`
135			`addr string,-24(sb) ; save address of string service routine`
136			`; ***************************************************************`
137			`; Endless loop : wait on Input from UART`
138			`; ***************************************************************`
139			`new: movd x'20240002,-2(sb)`
140			`sprd sb,r0`
141			`bsr string`
142			`movqd 0,-16(sb) ; Number of characters in buffer`
143			`loop: wait`
144			`cmpd -8(sb),-12(sb) ; has the UART something received?`
145			`beq loop ; No`
146			`; Auswertung`
147			`movd -8(sb),r1`
148			`movb x'100(sb)[r1:b],r0`
149			`addqb 1,-8(sb)`
150			`checkb r1,cvalid,r0 ; special character ?`
151			`bfs sys1 ; Yes`
152			`movd -16(sb),r1`
153			`cmpqd 0,r1`
154			`bne sys2`
155			`cmpb '+',r0`
156			`beq sys3`
157			`cmpb '-',r0`
158			`beq sys4`
159			`sys2: movb r0,0(sb)[r1:b]`
160			`addr 1(r1),-16(sb)`
161			`sys0: bsr out`
162			`br loop`
163			`sys1: cmpb 8,r0 ; Delete`
164			`bne sys5`
165			`cmpqd 0,-16(sb)`
166			`beq loop`
167			`addqd -1,-16(sb)`
168			`bsr out`
169			`movb ' ',r0`
170			`bsr out`
171			`movb 8,r0`
172			`br sys0`
173			`sys5: cmpb 13,r0 ; CR only output`
174			`beq sys0`
175			`cmpb 10,r0 ; LF now analyzing input`
176			`bne new`
177			`; Analyzing input:`
178			`bsr out`
179			`sprd sb,r2`
180			`movd -16(sb),r1 ; Number of characters in buffer`
181			`sys7: cmpqd 0,r1`
182			`beq new`
183			`movb 0(r2),r0`
184			`addqd 1,r2`
185			`addqd -1,r1`
186			`cmpb ' ',r0`
187			`beq sys7 ; next character`
188			`bicb x'20,r0 ; only capital letters`
189			`movqd 0,r6`
190			`cmpb 'L',r0 ; "Load"`
191			`beq sys6`
192			`movqd 1,r6`
193			`cmpb 'R',r0 ; "Run"`
194			`beq sys6`
195			`movqd 2,r6`
196			`cmpb 'D',r0 ; "Dump"`
197			`beq sys6`
198			`br erin ; Error in input`
199			`; now look for ' ' and address input`
200			`sys6: cmpqd 0,r1`
201			`beq erin ; no input any more`
202			`cmpb ' ',0(r2)`
203			`addqd 1,r2`
204			`addqd -1,r1`
205			`bne sys6`
206			`; now look for characters`
207			`sys8: cmpqd 0,r1`
208			`beq erin`
209			`cmpb ' ',0(r2)`
210			`addqd 1,r2`
211			`addqd -1,r1`
212			`beq sys8`
213			`; Addresse build`
214			`movqd 0,r4`
215			`sy10: movb -1(r2),r3`
216			`checkb r5,cziff,r3`
217			`bfc sy11`
218			`bicb x'20,r3`
219			`checkb r5,cabc,r3`
220			`bfs erin ; illegal character -> Abort`
221			`addb 10,r5`
222			`sy11: ashd 4,r4`
223			`orb r5,r4`
224			`cmpqd 0,r1`
225			`beq sys9`
226			`addqd 1,r2`
227			`addqd -1,r1`
228			`br sy10`
229			`; Now execute ...`
230			`.align 4`
231			`sys9: casew sy12[r6:w]`
232			`sy12: .word syld-sys9`
233			`.word sygo-sys9`
234			`.word sydu-sys9`
235			`; Program Call`
236			`sygo: jsr r4`
237			`movd x'20200000,r7`
238			`br new`
239			`; make Dump , R4 is pointer`
240			`sys4: subd 512,-20(sb)`
241			`sys3: movd -20(sb),r4`
242			`movb 13,r0 ; make CR before`
243			`bsr out`
244			`sydu: movb 16,r5 ; Number of Lines`
245			`sy18: sprd sb,r0 ; Pointer to String`
246			`movzbd 28,r1`
247			`sy13: extd r1,r4,r2,4`
248			`movb datah[r2:b],0(r0)`
249			`addqd 1,r0`
250			`addqb -4,r1`
251			`cmpqb -4,r1`
252			`bne sy13`
253			`movb 16,r6`
254			`sy15: movb ' ',0(r0)`
255			`addqd 1,r0`
256			`addr -1(r6),r2`
257			`andb 3,r2`
258			`cmpqb 3,r2`
259			`bne sy14`
260			`movb ' ',0(r0)`
261			`addqd 1,r0`
262			`sy14: extsd 0(r4),r2,4,4`
263			`movb datah[r2:b],0(r0)`
264			`extsd 0(r4),r2,0,4`
265			`movb datah[r2:b],1(r0)`
266			`addqd 2,r0`
267			`addqd 1,r4`
268			`acbb -1,r6,sy15`
269			`movw x'2720,0(r0)`
270			`addqd 2,r0`
271			`addr -16(r4),r4`
272			`movb 16,r6`
273			`sy16: movb 0(r4),r2`
274			`checkb r1,cvalid,r2`
275			`bfc sy17`
276			`movb '.',r2`
277			`sy17: movb r2,0(r0)`
278			`addqd 1,r0`
279			`addqd 1,r4`
280			`acbb -1,r6,sy16`
281			`movd x'0A0D27,0(r0)`
282			`addqd 3,r0`
283			`movzbw r0,-2(sb)`
284			`sprd sb,r0`
285			`bsr string`
286			`acbb -1,r5,sy18`
287			`movd r4,-20(sb)`
288			`br new`
289			`; Example:`
290			`; ":200000006DA60BF757A000000C80CF0F00D7A1FFFFFE00D4A315165C7810D4A30D185C7800"`
291			`; ":007FE001A0"`
292			`; R4 pointer to memory`
293			`; R5 "0" counter`
294			`syld: movqd 0,r5`
295			`sy23: bsr getchar`
296			`cmpb ':',r0`
297			`bne abort ; Abort if not ':' - what happens after this don't care`
298			`movqd 0,r6 ; Checksum=0`
299			`bsr getbyte`
300			`cmpqb 0,r0`
301			`beq sy19 ; End`
302			`movb r0,r1`
303			`bsr getbyte`
304			`movzbd r0,r2`
305			`lshd 8,r2`
306			`bsr getbyte`
307			`movb r0,r2`
308			`bsr getbyte`
309			`cmpqb 0,r0`
310			`bne abort ; if not 0 - Abort. Limited to 64K`
311			`sy20: bsr getbyte`
312			`movb r0,r4[r2:b]`
313			`addqd 1,r2`
314			`addqd 1,r5`
315			`acbb -1,r1,sy20`
316			`bsr getbyte`
317			`cmpqd 0,r6`
318			`bne abort`
319			`sy21: bsr getchar ; CR and LF read`
320			`cmpb 10,r0 ; there are Files without CR !`
321			`bne sy21`
322			`; show how many load up to now R2 -> decimal`
323			`movd 10000,r0`
324			`addr 1(sb),r3`
325			`movd x'D0006,-2(sb)`
326			`movd r5,r2`
327			`sy22: movd r2,r1`
328			`divd r0,r1`
329			`orb x'30,r1`
330			`movb r1,0(r3)`
331			`addqd 1,r3`
332			`modd r0,r2`
333			`divd 10,r0`
334			`cmpqd 0,r0`
335			`bne sy22`
336			`sprd sb,r0`
337			`bsr string`
338			`br sy23`
339			`; ***** Load finished *****`
340			`sy19: movqb 4,r1`
341			`sy24: bsr getbyte`
342			`acbb -1,r1,sy24`
343			`cmpqd 0,r6`
344			`bne abort`
345			`sy25: bsr getchar ; CR and LF read`
346			`cmpb 10,r0`
347			`bne sy25`
348			`addr crlf,r0`
349			`sy26: bsr string`
350			`br new`
351
352			`erin: addr erinfo,r0`
353			`br sy26`
354
355			`getchar:`
356			`save [r1]`
357			`gec1: cmpd -8(sb),-12(sb)`
358			`beq gec1`
359			`movd -8(sb),r1`
360			`movb x'100(sb)[r1:b],r0`
361			`addqb 1,-8(sb)`
362			`restore [r1]`
363			`ret 0`
364
365			`getbyte:`
366			`save [r1,r2]`
367			`bsr getchar`
368			`checkb r1,cziff,r0`
369			`bfc geb1`
370			`bicb x'20,r0`
371			`checkb r1,cabc,r0`
372			`bfc geb2`
373			`orw x'A00,r6`
374			`geb2: addb 10,r1`
375			`geb1: ashd 4,r1`
376			`bsr getchar`
377			`checkb r2,cziff,r0`
378			`bfc geb3`
379			`bicb x'20,r0`
380			`checkb r2,cabc,r0`
381			`bfc geb4`
382			`orw x'A00,r6`
383			`geb4: addb 10,r2`
384			`geb3: orb r2,r1`
385			`addb r1,r6 ; add to Checksum`
386			`movb r1,r0`
387			`restore [r1,r2]`
388			`ret 0`
389
390			`abort:`
391			`addr lderr,r0`
392			`bsr string`
393			`br new`
394
395			`out: tbitb 11,0(r7)`
396			`bfs out`
397			`movb r0,0(r7)`
398			`ret 0`
399
400			`string:`
401			`save [r1,r7]`
402			`movd x'20200000,r7`
403			`movw -2(r0),r1`
404			`st3: cmpqw 0,r1`
405			`beq st1`
406			`st2: tbitb 11,0(r7)`
407			`bfs st2`
408			`movb 0(r0),0(r7)`
409			`addqd 1,r0`
410			`acbw -1,r1,st2`
411			`st1: restore [r1,r7]`
412			`ret 0`
413
414			`datal: ; 0 1 2 3 4 5 6 7 8 9 A B C D E F`
415			`.byte x'3F,6,x'5B,x'4F,x'66,x'6D,x'7D,x'07,x'7F,x'6F,x'77,x'7C,x'39,x'5E,x'79,x'71`
416
417			`datah: .byte '0123456789ABCDEF'`
418
419			`.align 4`
420			`datfp: .double x'87654321,x'0FEDCBA9`
421			`cvalid: .byte x'7E,x'20`
422			`cziff: .byte '90'`
423			`cabc: .byte 'FA'`
424
425			`.word txt_1-sram_ok`
426			`sram_ok: .byte '512K SRAM ok.',13,10`
427			`txt_1: .word txt_2-welcome`
428			`welcome: .byte 13,10,'Hardware: TRIPUTER V0.1 , 27 May 2017'`
429			`.byte 13,10,'Software: MONITOR V0.1 , 27 May 2017',13,10`
430			`txt_2: .word txt_3-idram_ok`
431			`idram_ok: .byte '128K iDRAM ok.',13,10`
432			`txt_3: .word txt_4-error`
433			`error: .byte 'Memory Fault !!!',13,10`
434			`txt_4: .word txt_6-lderr`
435			`lderr: .byte 13,10,'Error in Load!',13,10`
436			`txt_6: .word txt_7-crlf`
437			`crlf: .byte 13,10`
438			`txt_7: .word txt_8-erinfo`
439			`erinfo: .byte 'Error in input!',13,10`
440			`txt_8:`
441
442			`.align 4`
443			`nmi: save [r0,r1]`
444			`movb -4(sb),r0`
445			`extsd r0,r1,0,4`
446			`comb datal[r1:b],x'200004(r7)`
447			`extsd r0,r1,4,4`
448			`comb datal[r1:b],x'200005(r7)`
449			`bispsrb 1`
450			`addpb 0,r0`
451			`cmpb x'60,r0`
452			`beq nmi1`
453			`nmi2: movb r0,-4(sb)`
454			`restore [r0,r1]`
455			`rett 0`
456			`nmi1: movqb 0,r0`
457			`br nmi2`
458
459			`.align 4`
460			`int: save [r0] ; RX UART`
461			`movd -12(sb),r0`
462			`movb 0(r7),x'100(sb)[r0:b]`
463			`addqb 1,-12(sb)`
464			`movb x'100(sb)[r0:b],x'200000(r7)`
465			`movb r0,x'200002(r7)`
466			`restore [r0]`
467			`reti`
468
469			`err: addr error,r0`
470			`bsr string`
471			`err1: comw x'4040,4(r1) ; 0 = leuchten`
472			`br err1`
473