OpenCores
URL https://opencores.org/ocsvn/mem_ctrl/mem_ctrl/trunk

Subversion Repositories mem_ctrl

[/] [mem_ctrl/] [trunk/] [bench/] [verilog/] [sram_models/] [MicronSRAM/] [mt58l1my18d.v] - Blame information for rev 29

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 4 rudi 
/****************************************************************************************
2 
*
3 
*    File Name:  MT58L1MY18D.V
4 
*      Version:  1.3
5 
*         Date:  March 8th, 1999
6 
*        Model:  BUS Functional
7 
*    Simulator:  Model Technology
8 
*
9 
* Dependencies:  None
10 
*
11 
*       Author:  Son P. Huynh
12 
*        Email:  sphuynh@micron.com
13 
*        Phone:  (208) 368-3825
14 
*      Company:  Micron Technology, Inc.
15 
*       Part #:  MT58L1MY18D (1Mb x 18)
16 
*
17 
*  Description:  This is Micron's Syncburst SRAM (Pipelined DCD)
18 
*
19 
*   Limitation:
20 
*
21 
*   Disclaimer:  THESE DESIGNS ARE PROVIDED "AS IS" WITH NO WARRANTY
22 
*                WHATSOEVER AND MICRON SPECIFICALLY DISCLAIMS ANY
23 
*                IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR
24 
*                A PARTICULAR PURPOSE, OR AGAINST INFRINGEMENT.
25 
*
26 
*                Copyright (c) 1997 Micron Semiconductor Products, Inc.
27 
*                All rights researved
28 
*
29 
* Rev  Author                        Date        Changes
30 
* ---  ----------------------------  ----------  ---------------------------------------
31 
* 1.3  Son P. Huynh    208-368-3825  03/08/1999  Improve model functionality
32 
*      Micron Technology, Inc.
33 
*
34 
****************************************************************************************/
35 
 
36 
// DO NOT CHANGE THE TIMESCALE
37 
// MAKE SURE YOUR SIMULATOR USE "PS" RESOLUTION
38 
`timescale 1ns / 100ps
39 
 
40 
module mt58l1my18d (Dq, Addr, Mode, Adv_n, Clk, Adsc_n, Adsp_n, Bwa_n, Bwb_n, Bwe_n, Gw_n, Ce_n, Ce2, Ce2_n, Oe_n, Zz);
41 
 
42 
    parameter                       addr_bits =      20;        //  20 bits
43 
    parameter                       data_bits =      18;        //  18 bits
44 
    parameter                       mem_sizes = 1048575;        //   1 Mb
45 
    parameter                       reg_delay =     0.1;        // 100 ps
46 
    parameter                       out_delay =     0.1;        // 100 ps
47 
    parameter                       tKQHZ     =     3.5;        //  -6 device
48 
 
49 
    inout     [(data_bits - 1) : 0] Dq;                         // Data IO
50 
    input     [(addr_bits - 1) : 0] Addr;                       // Address
51 
    input                           Mode;                       // Burst Mode
52 
    input                           Adv_n;                      // Synchronous Address Advance
53 
    input                           Clk;                        // Clock
54 
    input                           Adsc_n;                     // Synchronous Address Status Controller
55 
    input                           Adsp_n;                     // Synchronous Address Status Processor
56 
    input                           Bwa_n;                      // Synchronous Byte Write Enables
57 
    input                           Bwb_n;                      // Synchronous Byte Write Enables
58 
    input                           Bwe_n;                      // Byte Write Enable
59 
    input                           Gw_n;                       // Global Write
60 
    input                           Ce_n;                       // Synchronous Chip Enable
61 
    input                           Ce2;                        // Synchronous Chip Enable
62 
    input                           Ce2_n;                      // Synchronous Chip Enable
63 
    input                           Oe_n;                       // Output Enable
64 
    input                           Zz;                         // Snooze Mode
65 
 
66 
    reg [((data_bits / 2) - 1) : 0] bank0 [0 : mem_sizes];      // Memory Bank 0
67 
    reg [((data_bits / 2) - 1) : 0] bank1 [0 : mem_sizes];      // Memory Bank 1
68 
 
69 
    reg       [(data_bits - 1) : 0] din;                        // Input Registers
70 
    reg       [(data_bits - 1) : 0] dout;                       // Output Registers
71 
    reg       [(addr_bits - 1) : 0] addr_reg_in;                // Address Register In
72 
    reg       [(addr_bits - 1) : 0] addr_reg_read;              // Address Register for Read Operation
73 
    reg                     [1 : 0] bcount;                     // 2-bit Burst Counter
74 
 
75 
    reg                             ce_reg;
76 
    reg                             pipe_reg;
77 
    reg                             bwa_reg;
78 
    reg                             bwb_reg;
79 
    reg                             sys_clk;
80 
 
81 
    wire                            ce      = (~Ce_n & ~Ce2_n & Ce2);
82 
    wire                            bwa_n   = (((Bwa_n | Bwe_n) & Gw_n) | (~Ce_n & ~Adsp_n));
83 
    wire                            bwb_n   = (((Bwb_n | Bwe_n) & Gw_n) | (~Ce_n & ~Adsp_n));
84 
    wire                            clr     = (~Adsc_n | (~Adsp_n & ~Ce_n));
85 
 
86 
    wire      [(addr_bits - 1) : 0] addr_reg_write;             // Address Register for Write Operation
87 
    wire                            baddr1;                     // Burst Address 1
88 
    wire                            baddr0;                     // Burst Address 0
89 
 
90 
    // Initialize
91 
    initial begin
92 
        ce_reg = 1'b0;
93 
        sys_clk = 1'b0;
94 
        pipe_reg = 1'b0;
95 
        $timeformat (-9, 1, " ns", 10);                         // Format time unit
96 
    end
97 
 
98 
 
99 
task mem_fill;
100 
input   x;
101 
 
102 
integer         a, n, x;
103 23 rudi 
reg     [15:0]   data;
104 4 rudi 
begin
105 
 
106 
a=0;
107 
for(n=0;n<x;n=n+1)
108 
   begin
109 23 rudi 
        data = a;
110 
        bank0[n] = { ^data[15:8], data[15:8], ^data[7:0], data[7:0]};
111 
        data = a+1;
112 
        bank1[n] = { ^data[15:8], data[15:8], ^data[7:0], data[7:0]};
113 4 rudi 
        a=a+2;
114 
   end
115 
 
116 
end
117 
endtask
118 
 
119 
    // System Clock
120 
    always begin
121 
        @ (posedge Clk) begin
122 
            sys_clk = ~Zz;
123 
        end
124 
        @ (negedge Clk) begin
125 
            sys_clk = 1'b0;
126 
        end
127 
    end
128 
 
129 
    always @ (posedge sys_clk) begin
130 
        // Address Register
131 
        if (clr) addr_reg_in   <= Addr;
132 
                 addr_reg_read <= {addr_reg_in [(addr_bits - 1) : 2], baddr1, baddr0};
133 
 
134 
        // Binary Counter and Logic
135 
        if      ( Mode  &  clr) bcount <= 0;                    // Interleaved Burst
136 
        else if (~Mode  &  clr) bcount <= Addr [1 : 0];         // Linear Burst
137 
        else if (~Adv_n & ~clr) bcount <= (bcount + 1);         // Advance Counter
138 
 
139 
        // Byte Write Register
140 
        bwa_reg <= ~bwa_n;
141 
        bwb_reg <= ~bwb_n;
142 
 
143 
        // Enable Register
144 
        if (clr) ce_reg <= ce;
145 
 
146 
        // Pipelined Enable
147 
        pipe_reg <= ce_reg;
148 
    end
149 
 
150 
    // Burst Address Decode
151 
    assign addr_reg_write = {addr_reg_in [(addr_bits - 1) : 2], baddr1, baddr0};
152 
    assign baddr1 = Mode ? (bcount [1] ^ addr_reg_in [1]) : bcount [1];
153 
    assign baddr0 = Mode ? (bcount [0] ^ addr_reg_in [0]) : bcount [0];
154 
 
155 
    // Write Driver
156 
    always @ (posedge Clk) begin
157 
        #reg_delay;
158 
        if (ce_reg & bwa_reg) begin
159 
            din [data_bits / 2 - 1 :  0] <= Dq [data_bits / 2 - 1 :  0];
160 
            bank0 [addr_reg_write] <= Dq [data_bits / 2 - 1 :  0];
161 
        end
162 
        if (ce_reg & bwb_reg) begin
163 
            din [data_bits - 1 : data_bits / 2] <= Dq [data_bits - 1 : data_bits / 2];
164 
            bank1 [addr_reg_write] <= Dq [data_bits - 1 : data_bits / 2];
165 
        end
166 
    end
167 
 
168 
    // Output Registers
169 
    always @ (posedge Clk) begin
170 
        #out_delay;
171 
        if (~(bwa_reg | bwb_reg)) begin
172 
            dout [data_bits / 2 - 1 :  0] <= bank0 [addr_reg_read];
173 
            dout [data_bits - 1 : data_bits / 2] <= bank1 [addr_reg_read];
174 
        end else begin
175 
            dout [data_bits - 1 : 0] <= {data_bits{1'bz}};
176 
        end
177 
    end
178 
 
179 
    // Output Buffers
180 
    assign #(tKQHZ) Dq = (~Oe_n & ~Zz & pipe_reg & ~(bwa_reg | bwb_reg)) ? dout : {data_bits{1'bz}};
181 
 
182 
    // Timing Check (6 ns clock cycle / 166 MHz)
183 
    // Please download latest datasheet from our Web site:
184 
    //      http://www.micron.com/mti
185 
    specify
186 
        specparam   tKC     =  6.0,     // Clock        - Clock cycle time
187 
                    tKH     =  2.3,     //                Clock HIGH time
188 
                    tKL     =  2.3,     //                Clock LOW time
189 
                    tAS     =  1.5,     // Setup Times  - Address
190 
                    tADSS   =  1.5,     //                Address Status
191 
                    tAAS    =  1.5,     //                Address Advance
192 
                    tWS     =  1.5,     //                Byte Write Enables
193 
                    tDS     =  1.5,     //                Data-in
194 
                    tCES    =  1.5,     //                Chip Enable
195 
                    tAH     =  0.5,     // Hold Times   - Address
196 
                    tADSH   =  0.5,     //                Address Status
197 
                    tAAH    =  0.5,     //                Address Advance
198 
                    tWH     =  0.5,     //                Byte Write Enables
199 
                    tDH     =  0.5,     //                Data-in
200 
                    tCEH    =  0.5;     //                Chip Enable
201 
 
202 
        $width      (negedge Clk, tKL);
203 
        $width      (posedge Clk, tKH);
204 
        $period     (negedge Clk, tKC);
205 
        $period     (posedge Clk, tKC);
206 
        $setuphold  (posedge Clk, Adsp_n, tADSS, tADSH);
207 
        $setuphold  (posedge Clk, Adsc_n, tADSS, tADSH);
208 
        $setuphold  (posedge Clk, Addr,   tAS,   tAH);
209 
        $setuphold  (posedge Clk, Bwa_n,  tWS,   tWH);
210 
        $setuphold  (posedge Clk, Bwb_n,  tWS,   tWH);
211 
        $setuphold  (posedge Clk, Bwe_n,  tWS,   tWH);
212 
        $setuphold  (posedge Clk, Gw_n,   tWS,   tWH);
213 
        $setuphold  (posedge Clk, Ce_n,   tCES,  tCEH);
214 
        $setuphold  (posedge Clk, Ce2,    tCES,  tCEH);
215 
        $setuphold  (posedge Clk, Ce2_n,  tCES,  tCEH);
216 
        $setuphold  (posedge Clk, Adv_n,  tAAS,  tAAH);
217 
    endspecify
218 
 
219 
endmodule
220 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.