OpenCores
URL https://opencores.org/ocsvn/mem_ctrl/mem_ctrl/trunk

Subversion Repositories mem_ctrl

[/] [mem_ctrl/] [trunk/] [bench/] [vhdl/] [mt58l64l32p.v] - Blame information for rev 29

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 4 rudi 
/****************************************************************************************
2 
*
3 
*    File Name:  MT58L64L32P.V
4 
*      Version:  1.5
5 
*         Date:  June 29th, 2001
6 
*        Model:  Behavioral
7 
*    Simulator:  Model Technology
8 
*
9 
* Dependencies:  None
10 
*
11 
*       Author:  Son P. Huynh
12 
*        Email:  sphuynh@micron.com
13 
*        Phone:  (208) 368-3825
14 
*      Company:  Micron Technology, Inc.
15 
*       Part #:  MT58L64L32P (64K x 32)
16 
*
17 
*  Description:  This is Micron's Synburst SRAM (Pipelined SCD)
18 
*
19 
*   Limitation:
20 
*
21 
*   Disclaimer:  THESE DESIGNS ARE PROVIDED "AS IS" WITH NO WARRANTY
22 
*                WHATSOEVER AND MICRON SPECIFICALLY DISCLAIMS ANY
23 
*                IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR
24 
*                A PARTICULAR PURPOSE, OR AGAINST INFRINGEMENT.
25 
*
26 
*                Copyright (c) 1997 Micron Semiconductor Products, Inc.
27 
*                All rights researved
28 
*
29 
* Rev  Author          Phone           Date        Changes
30 
* ---  --------------  --------------  ----------  --------------------------------------
31 
* 1.5  Son P. Huynh    (208) 368-3825  04/30/1999  Update timing parameters
32 
*      Micron Technology, Inc.
33 
*
34 
****************************************************************************************/
35 
 
36 
// DO NOT CHANGE THE TIMESCALE
37 
// MAKE SURE YOUR SIMULATOR USE "PS" RESOLUTION
38 
`timescale 1ns / 100ps
39 
 
40 
module mt58l64l32p (Dq, Addr, Mode, Adv_n, Clk, Adsc_n, Adsp_n, Bwa_n, Bwb_n, Bwc_n, Bwd_n, Bwe_n, Gw_n, Ce_n, Ce2, Ce2_n, Oe_n, Zz);
41 
 
42 
    // Constant Parameters
43 
    parameter                       addr_bits =     16;         //  16 bits
44 
    parameter                       data_bits =     32;         //  32 bits
45 
    parameter                       mem_sizes =  65535;         //  64 K
46 
 
47 
    // Timing Parameters for -5 (200 Mhz)
48 
    parameter                       tKQHZ     =      2.5;       // Clock to output HiZ
49 
 
50 
    // Port Delcarations
51 
    inout     [(data_bits - 1) : 0] Dq;                         // Data IO
52 
    input     [(addr_bits - 1) : 0] Addr;                       // Address
53 
    input                           Mode;                       // Burst Mode
54 
    input                           Adv_n;                      // Synchronous Address Advance
55 
    input                           Clk;                        // Clock
56 
    input                           Adsc_n;                     // Synchronous Address Status Controller
57 
    input                           Adsp_n;                     // Synchronous Address Status Processor
58 
    input                           Bwa_n;                      // Synchronous Byte Write Enables
59 
    input                           Bwb_n;                      // Synchronous Byte Write Enables
60 
    input                           Bwc_n;                      // Synchronous Byte Write Enables
61 
    input                           Bwd_n;                      // Synchronous Byte Write Enables
62 
    input                           Bwe_n;                      // Byte Write Enable
63 
    input                           Gw_n;                       // Global Write
64 
    input                           Ce_n;                       // Synchronous Chip Enable
65 
    input                           Ce2;                        // Synchronous Chip Enable
66 
    input                           Ce2_n;                      // Synchronous Chip Enable
67 
    input                           Oe_n;                       // Output Enable
68 
    input                           Zz;                         // Snooze Mode
69 
 
70 
    // Memory Arrays
71 
    reg [((data_bits / 4) - 1) : 0] bank0 [0 : mem_sizes];      // Memory Bank 0
72 
    reg [((data_bits / 4) - 1) : 0] bank1 [0 : mem_sizes];      // Memory Bank 1
73 
    reg [((data_bits / 4) - 1) : 0] bank2 [0 : mem_sizes];      // Memory Bank 2
74 
    reg [((data_bits / 4) - 1) : 0] bank3 [0 : mem_sizes];      // Memory Bank 3
75 
 
76 
    // Declare Connection Variables
77 
    reg       [(data_bits - 1) : 0] dout;                       // Output Registers
78 
    reg       [(addr_bits - 1) : 0] addr_reg_in;                // Address Register In
79 
    reg       [(addr_bits - 1) : 0] addr_reg_read;              // Address Register for Read Operation
80 
    reg                     [1 : 0] bcount;                     // 2-bit Burst Counter
81 
 
82 
    reg                             ce_reg;
83 
    reg                             pipe_reg;
84 
    reg                             bwa_reg;
85 
    reg                             bwb_reg;
86 
    reg                             bwc_reg;
87 
    reg                             bwd_reg;
88 
    reg                             sys_clk;
89 
 
90 
    wire                            ce      = (~Ce_n & Ce2 & ~Ce2_n);
91 
    wire                            bwa_n   = ((Bwa_n | Bwe_n) & Gw_n | (~Ce_n & ~Adsp_n));
92 
    wire                            bwb_n   = ((Bwb_n | Bwe_n) & Gw_n | (~Ce_n & ~Adsp_n));
93 
    wire                            bwc_n   = ((Bwc_n | Bwe_n) & Gw_n | (~Ce_n & ~Adsp_n));
94 
    wire                            bwd_n   = ((Bwd_n | Bwe_n) & Gw_n | (~Ce_n & ~Adsp_n));
95 
    wire                            clr     = (~Adsc_n | (~Adsp_n & ~Ce_n));
96 
 
97 
    wire      [(addr_bits - 1) : 0] addr_reg_write;             // Address Register for Write Operation
98 
    wire                            baddr1;                     // Burst Address 1
99 
    wire                            baddr0;                     // Burst Address 0
100 
 
101 
    // Initial Conditions
102 
    initial begin
103 
        ce_reg = 1'b0;
104 
        sys_clk = 1'b0;
105 
        pipe_reg = 1'b0;
106 
        $timeformat (-9, 1, " ns", 10);                         // Format time unit
107 
    end
108 
 
109 
    // System Clock
110 
    always begin
111 
        @ (posedge Clk) begin
112 
            sys_clk = ~Zz;
113 
        end
114 
        @ (negedge Clk) begin
115 
            sys_clk = 1'b0;
116 
        end
117 
    end
118 
 
119 
    always @ (posedge sys_clk) begin
120 
        // Address Register
121 
        if (clr) addr_reg_in   <= Addr;
122 
                 addr_reg_read <= {addr_reg_in[addr_bits - 1 : 2], baddr1, baddr0};
123 
 
124 
        // Binary Counter and Logic
125 
        if      ( Mode  &  clr) bcount <= 0;                    // Interleaved Burst
126 
        else if (~Mode  &  clr) bcount <= Addr [1 : 0];         // Linear Burst
127 
        else if (~Adv_n & ~clr) bcount <= (bcount + 1);         // Advance Counter
128 
 
129 
        // Byte Write Register
130 
        bwa_reg <= ~bwa_n;
131 
        bwb_reg <= ~bwb_n;
132 
        bwc_reg <= ~bwc_n;
133 
        bwd_reg <= ~bwd_n;
134 
 
135 
        // Enable Register
136 
        if (clr) ce_reg <= ce;
137 
 
138 
        // Pipelined Enable
139 
        pipe_reg <= ce_reg;
140 
 
141 
    end
142 
 
143 
    // Burst Address Decode
144 
    assign addr_reg_write = {addr_reg_in [(addr_bits - 1) : 2], baddr1, baddr0};
145 
    assign baddr1 = Mode ? (bcount [1] ^ addr_reg_in [1]) : bcount [1];
146 
    assign baddr0 = Mode ? (bcount [0] ^ addr_reg_in [0]) : bcount [0];
147 
 
148 
    // Write Driver
149 
    always @ (posedge Clk) begin
150 
        #0.1;
151 
        if (ce_reg & bwa_reg) begin
152 
            bank0 [addr_reg_write] <= Dq [((data_bits / 4) - 1) : 0];
153 
        end
154 
        if (ce_reg & bwb_reg) begin
155 
            bank1 [addr_reg_write] <= Dq [((data_bits / 2) - 1) : (data_bits / 4)];
156 
        end
157 
        if (ce_reg & bwc_reg) begin
158 
            bank2 [addr_reg_write] <= Dq [(((data_bits / 4) * 3) - 1) : (data_bits / 2)];
159 
        end
160 
        if (ce_reg & bwd_reg) begin
161 
            bank3 [addr_reg_write] <= Dq [(data_bits - 1) : ((data_bits / 4) * 3)];
162 
        end
163 
    end
164 
 
165 
    // Output Register
166 
    always @ (posedge Clk) begin
167 
        #0.1;
168 
        if (~(bwa_reg | bwb_reg | bwc_reg | bwd_reg)) begin
169 
            dout [((data_bits / 4) - 1) : 0] <= bank0 [addr_reg_read];
170 
            dout [((data_bits / 2) - 1) : (data_bits / 4)] <= bank1 [addr_reg_read];
171 
            dout [(((data_bits / 4) * 3) - 1) : (data_bits / 2)] <= bank2 [addr_reg_read];
172 
            dout [(data_bits - 1) : ((data_bits / 4) * 3)] <= bank3 [addr_reg_read];
173 
        end
174 
    end
175 
 
176 
    // Output Buffer
177 
    assign #tKQHZ Dq = (~Oe_n & ~Zz & ce_reg & pipe_reg & ~(bwa_reg | bwb_reg | bwc_reg | bwd_reg)) ? dout : {data_bits{1'bz}};
178 
 
179 
    // Timing Check for -5 (200 Mhz)
180 
    specify
181 
        specparam   // Clock
182 
                    tKC     =  5.0,
183 
                    tKH     =  1.6,
184 
                    tKL     =  1.6,
185 
                    // Setup Times
186 
                    tAS     =  1.5,
187 
                    tADSS   =  1.5,
188 
                    tAAS    =  1.5,
189 
                    tWS     =  1.5,
190 
                    tDS     =  1.5,
191 
                    tCES    =  1.5,
192 
                    // Hold Times
193 
                    tAH     =  0.5,
194 
                    tADSH   =  0.5,
195 
                    tAAH    =  0.5,
196 
                    tWH     =  0.5,
197 
                    tDH     =  0.5,
198 
                    tCEH    =  0.5;
199 
 
200 
        $width      (negedge Clk, tKL);
201 
        $width      (posedge Clk, tKH);
202 
        $period     (negedge Clk, tKC);
203 
        $period     (posedge Clk, tKC);
204 
        $setuphold  (posedge Clk, Adsp_n, tADSS, tADSH);
205 
        $setuphold  (posedge Clk, Adsc_n, tADSS, tADSH);
206 
        $setuphold  (posedge Clk, Addr,   tAS,   tAH);
207 
        $setuphold  (posedge Clk, Bwa_n,  tWS,   tWH);
208 
        $setuphold  (posedge Clk, Bwb_n,  tWS,   tWH);
209 
        $setuphold  (posedge Clk, Bwc_n,  tWS,   tWH);
210 
        $setuphold  (posedge Clk, Bwd_n,  tWS,   tWH);
211 
        $setuphold  (posedge Clk, Bwe_n,  tWS,   tWH);
212 
        $setuphold  (posedge Clk, Gw_n,   tWS,   tWH);
213 
        $setuphold  (posedge Clk, Ce_n,   tCES,  tCEH);
214 
        $setuphold  (posedge Clk, Ce2,    tCES,  tCEH);
215 
        $setuphold  (posedge Clk, Ce2_n,  tCES,  tCEH);
216 
        $setuphold  (posedge Clk, Adv_n,  tAAS,  tAAH);
217 
    endspecify
218 
 
219 
endmodule
220 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.