OpenCores
URL https://opencores.org/ocsvn/miniuart2/miniuart2/trunk

Subversion Repositories miniuart2

[/] [miniuart2/] [trunk/] [impl/] [Xilinx/] [log/] [par.rtf] - Blame information for rev 26

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 14 philippe 
{\rtf1\ansi\ansicpg1252\deff0\deflang1036{\fonttbl {\f0\fnil\fcharset0 Courier New;}}
2 
{\colortbl ;\red255\green0\blue0;}
3 
\uc1\pard\ulnone\f0\fs20\par
4 
Xilinx Mapping Report File for Design 'uartimpl'\par
5 
Copyright (c) 1995-2000 Xilinx, Inc.  All rights reserved.\par
6 
\par
7 
Design Information\par
8 
------------------\par
9 
Command Line   : m1map -p xcs10-3-tq144 -o map.ncd uartimpl.ngd uartimpl.pcf \par
10 
Target Device  : xs10\par
11 
Target Package : tq144\par
12 
Target Speed   : -3\par
13 
Mapper Version : spartan -- D.19\par
14 
\par
15 
\cf1 Design Summary\par
16 
--------------\par
17 
   Number of errors:        0\par
18 
   Number of warnings:      1\par
19 
   Number of CLBs:             44 out of   196   22%\par
20 
      CLB Flip Flops:      63\par
21 
      4 input LUTs:        63\par
22 
      3 input LUTs:        20 (17 used as route-throughs)\par
23 
   Number of bonded IOBs:      28 out of   111   25%\par
24 
      IOB Flops:            0\par
25 
      IOB Latches:          0\par
26 
   Number of clock IOB pads:    2 out of     8   25%\par
27 
   Number of primary CLKs:      2 out of     4   50%\par
28 
Total equivalent gate count for design: 769\par
29 
Additional JTAG gate count for IOBs:    1344\cf0\par
30 
\par
31 
Table of Contents\par
32 
-----------------\par
33 
Section 1 - Errors\par
34 
Section 2 - Warnings\par
35 
Section 3 - Design Attributes\par
36 
Section 4 - Removed Logic Summary\par
37 
Section 5 - Removed Logic\par
38 
Section 6 - Added Logic\par
39 
Section 7 - Expanded Logic\par
40 
Section 8 - Signal Cross-Reference\par
41 
Section 9 - Symbol Cross-Reference\par
42 
Section 10 - IOB Properties\par
43 
Section 11 - RPMs\par
44 
Section 12 - Guide Report\par
45 
Section 13 - Area Group Summary\par
46 
\par
47 
Section 1 - Errors\par
48 
------------------\par
49 
\par
50 
Section 2 - Warnings\par
51 
--------------------\par
52 
WARNING:OldMap:78 - All of the external outputs in this design are using\par
53 
   slew-rate-limited output drivers.  The delay on speed critical outputs can be\par
54 
   dramatically reduced by designating them as fast outputs in the original\par
55 
   design.  Please see your vendor interface documentation for specific\par
56 
   information on how to do this within your design-entry tool.\par
57 
   Note: You should be careful not to designate too many outputs which switch\par
58 
   together as fast, because this can cause excessive ground bounce.  For more\par
59 
   information on this subject, please refer to the IOB switching characteristic\par
60 
   guidelines for the device you are using in the Programmable Logic Data Book.\par
61 
\par
62 
Section 3 - Design Attributes\par
63 
-----------------------------\par
64 
\par
65 
Section 4 - Removed Logic Summary\par
66 
---------------------------------\par
67 
  58 block(s) removed\par
68 
  13 block(s) optimized away\par
69 
  58 signal(s) removed\par
70 
\par
71 
Section 5 - Removed Logic\par
72 
-------------------------\par
73 
\par
74 
The trimmed logic reported below is either:\par
75 
   1. part of a cycle\par
76 
   2. part of disabled logic\par
77 
   3. a side-effect of other trimmed logic\par
78 
\par
79 
The signal "U1/N255" is unused and has been removed.\par
80 
 Unused block "U1/C576" (GND) removed.\par
81 
The signal "U1/N256" is unused and has been removed.\par
82 
 Unused block "U1/C577" (GND) removed.\par
83 
The signal "U1/N257" is unused and has been removed.\par
84 
 Unused block "U1/C578" (GND) removed.\par
85 
The signal "U1/N258" is unused and has been removed.\par
86 
 Unused block "U1/C579" (GND) removed.\par
87 
The signal "U1/N259" is unused and has been removed.\par
88 
 Unused block "U1/C580" (GND) removed.\par
89 
The signal "U1/N260" is unused and has been removed.\par
90 
 Unused block "U1/C581" (GND) removed.\par
91 
The signal "U1/N261" is unused and has been removed.\par
92 
 Unused block "U1/C582" (GND) removed.\par
93 
The signal "U1/N262" is unused and has been removed.\par
94 
 Unused block "U1/C583" (GND) removed.\par
95 
The signal "U1/N263" is unused and has been removed.\par
96 
 Unused block "U1/C584" (GND) removed.\par
97 
The signal "U1/N264" is unused and has been removed.\par
98 
 Unused block "U1/C585" (GND) removed.\par
99 
The signal "U1/N265" is unused and has been removed.\par
100 
 Unused block "U1/C586" (GND) removed.\par
101 
The signal "U1/N266" is unused and has been removed.\par
102 
 Unused block "U1/C587" (GND) removed.\par
103 
The signal "U1/N267" is unused and has been removed.\par
104 
 Unused block "U1/C588" (GND) removed.\par
105 
The signal "U1/N268" is unused and has been removed.\par
106 
 Unused block "U1/C589" (GND) removed.\par
107 
The signal "U1/N269" is unused and has been removed.\par
108 
 Unused block "U1/C590" (GND) removed.\par
109 
The signal "U1/N270" is unused and has been removed.\par
110 
 Unused block "U1/C591" (GND) removed.\par
111 
The signal "U1/N271" is unused and has been removed.\par
112 
 Unused block "U1/C592" (GND) removed.\par
113 
The signal "U1/N272" is unused and has been removed.\par
114 
 Unused block "U1/C593" (GND) removed.\par
115 
The signal "U1/N273" is unused and has been removed.\par
116 
 Unused block "U1/C594" (GND) removed.\par
117 
The signal "U1/N274" is unused and has been removed.\par
118 
 Unused block "U1/C595" (GND) removed.\par
119 
The signal "U1/N275" is unused and has been removed.\par
120 
 Unused block "U1/C596" (GND) removed.\par
121 
The signal "U1/N276" is unused and has been removed.\par
122 
 Unused block "U1/C597" (GND) removed.\par
123 
The signal "U1/N277" is unused and has been removed.\par
124 
 Unused block "U1/C598" (GND) removed.\par
125 
The signal "U1/N278" is unused and has been removed.\par
126 
 Unused block "U1/C599" (GND) removed.\par
127 
The signal "U1/N279" is unused and has been removed.\par
128 
 Unused block "U1/C600" (GND) removed.\par
129 
The signal "U1/N280" is unused and has been removed.\par
130 
 Unused block "U1/C601" (GND) removed.\par
131 
The signal "U1/N281" is unused and has been removed.\par
132 
 Unused block "U1/C602" (GND) removed.\par
133 
The signal "U1/N282" is unused and has been removed.\par
134 
 Unused block "U1/C603" (GND) removed.\par
135 
The signal "U1/N283" is unused and has been removed.\par
136 
 Unused block "U1/C604" (GND) removed.\par
137 
The signal "U1/N284" is unused and has been removed.\par
138 
 Unused block "U1/C605" (GND) removed.\par
139 
The signal "U1/N285" is unused and has been removed.\par
140 
 Unused block "U1/C606" (GND) removed.\par
141 
The signal "U1/N286" is unused and has been removed.\par
142 
 Unused block "U1/C607" (GND) removed.\par
143 
The signal "U1/N287" is unused and has been removed.\par
144 
 Unused block "U1/C608" (GND) removed.\par
145 
The signal "U1/N288" is unused and has been removed.\par
146 
 Unused block "U1/C609" (GND) removed.\par
147 
The signal "U1/N289" is unused and has been removed.\par
148 
 Unused block "U1/C610" (GND) removed.\par
149 
The signal "U1/N290" is unused and has been removed.\par
150 
 Unused block "U1/C611" (GND) removed.\par
151 
The signal "U1/N291" is unused and has been removed.\par
152 
 Unused block "U1/C612" (GND) removed.\par
153 
The signal "U1/N292" is unused and has been removed.\par
154 
 Unused block "U1/C613" (GND) removed.\par
155 
The signal "U1/N293" is unused and has been removed.\par
156 
 Unused block "U1/C614" (GND) removed.\par
157 
The signal "U1/N294" is unused and has been removed.\par
158 
 Unused block "U1/C615" (GND) removed.\par
159 
The signal "U1/N295" is unused and has been removed.\par
160 
 Unused block "U1/C616" (GND) removed.\par
161 
The signal "U1/N296" is unused and has been removed.\par
162 
 Unused block "U1/C617" (GND) removed.\par
163 
The signal "U1/N297" is unused and has been removed.\par
164 
 Unused block "U1/C618" (GND) removed.\par
165 
The signal "U1/N298" is unused and has been removed.\par
166 
 Unused block "U1/C619" (GND) removed.\par
167 
The signal "U1/N299" is unused and has been removed.\par
168 
 Unused block "U1/C620" (GND) removed.\par
169 
The signal "U1/N300" is unused and has been removed.\par
170 
 Unused block "U1/C621" (GND) removed.\par
171 
The signal "U1/N301" is unused and has been removed.\par
172 
 Unused block "U1/C622" (GND) removed.\par
173 
The signal "U1/N302" is unused and has been removed.\par
174 
 Unused block "U1/C623" (GND) removed.\par
175 
The signal "U1/N303" is unused and has been removed.\par
176 
 Unused block "U1/C624" (GND) removed.\par
177 
The signal "U1/N304" is unused and has been removed.\par
178 
 Unused block "U1/C625" (GND) removed.\par
179 
The signal "U1/N305" is unused and has been removed.\par
180 
 Unused block "U1/C626" (GND) removed.\par
181 
The signal "U1/N306" is unused and has been removed.\par
182 
 Unused block "U1/C627" (GND) removed.\par
183 
The signal "U1/N307" is unused and has been removed.\par
184 
 Unused block "U1/C628" (GND) removed.\par
185 
The signal "U1/N308" is unused and has been removed.\par
186 
 Unused block "U1/C629" (GND) removed.\par
187 
The signal "U1/N309" is unused and has been removed.\par
188 
 Unused block "U1/C630" (GND) removed.\par
189 
The signal "U1/N310" is unused and has been removed.\par
190 
 Unused block "U1/C631" (GND) removed.\par
191 
The signal "U1/N311" is unused and has been removed.\par
192 
 Unused block "U1/C632" (GND) removed.\par
193 
The signal "U1/N312" is unused and has been removed.\par
194 
 Unused block "U1/C633" (GND) removed.\par
195 
\par
196 
Optimized Block(s):\par
197 
TYPE \tab\tab BLOCK\par
198 
vcc \tab\tab U1/LoadA_reg/$1I37\par
199 
vcc \tab\tab U1/ReadA_reg/$1I37\par
200 
vcc \tab\tab U1/Uart_Rxrate/Cnt_reg/$1I37\par
201 
vcc \tab\tab U1/Uart_Rxrate/O_reg/$1I37\par
202 
vcc \tab\tab U1/Uart_RxUnit/RxAv_reg/$1I37\par
203 
vcc \tab\tab U1/Uart_Txrate/O_reg/$1I37\par
204 
vcc \tab\tab U1/Uart_TxUnit/SyncLoad/C1A_reg/$1I37\par
205 
vcc \tab\tab U1/Uart_TxUnit/SyncLoad/C1S_reg/$1I37\par
206 
vcc \tab\tab U1/Uart_TxUnit/SyncLoad/R_reg/$1I37\par
207 
fdce \tab\tab U1/Uart_Rxrate/Cnt_reg/I$1\par
208 
GND \tab\tab U1/C575\par
209 
INV \tab\tab U1/C515\par
210 
VCC \tab\tab U1/C574\par
211 
\par
212 
Section 6 - Added Logic\par
213 
-----------------------\par
214 
\par
215 
Section 7 - Expanded Logic\par
216 
--------------------------\par
217 
To enable this section, set the detailed map report option and rerun map.\par
218 
\par
219 
Section 8 - Signal Cross-Reference\par
220 
----------------------------------\par
221 
To enable this section, set the detailed map report option and rerun map.\par
222 
\par
223 
Section 9 - Symbol Cross-Reference\par
224 
----------------------------------\par
225 
To enable this section, set the detailed map report option and rerun map.\par
226 
\par
227 
Section 10 - IOB Properties\par
228 
---------------------------\par
229 
"$Net00010_" (IOB) : SLEW=SLOW\par
230 
"$Net00011_" (IOB) : SLEW=SLOW\par
231 
"$Net00012_" (IOB) : SLEW=SLOW\par
232 
"$Net00013_" (IOB) : SLEW=SLOW\par
233 
"&__A__10" (IOB) : SLEW=SLOW\par
234 
"&__A__11" (IOB) : SLEW=SLOW\par
235 
"&__A__12" (IOB) : SLEW=SLOW\par
236 
"&__A__13" (IOB) : SLEW=SLOW\par
237 
"&__A__14" (IOB) : SLEW=SLOW\par
238 
"&__A__15" (IOB) : SLEW=SLOW\par
239 
"&__A__16" (IOB) : SLEW=SLOW\par
240 
"&__A__9" (IOB) : SLEW=SLOW\par
241 
\par
242 
Section 11 - RPMs\par
243 
-----------------\par
244 
\par
245 
Section 12 - Guide Report\par
246 
-------------------------\par
247 
Guide not run on this design.\par
248 
\par
249 
}
250 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.