OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [branches/] [rc-1.0/] [backend/] [spartan3a_dsp_kit/] [or1200_defines.v] - Blame information for rev 141

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 118 rfajardo 
//////////////////////////////////////////////////////////////////////
2 
////                                                              ////
3 
////  OR1200's definitions                                        ////
4 
////                                                              ////
5 
////  This file is part of the OpenRISC 1200 project              ////
6 
////  http://www.opencores.org/cores/or1k/                        ////
7 
////                                                              ////
8 
////  Description                                                 ////
9 
////  Parameters of the OR1200 core                               ////
10 
////                                                              ////
11 
////  To Do:                                                      ////
12 
////   - add parameters that are missing                          ////
13 
////                                                              ////
14 
////  Author(s):                                                  ////
15 
////      - Damjan Lampret, lampret@opencores.org                 ////
16 
////                                                              ////
17 
//////////////////////////////////////////////////////////////////////
18 
////                                                              ////
19 
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
20 
////                                                              ////
21 
//// This source file may be used and distributed without         ////
22 
//// restriction provided that this copyright statement is not    ////
23 
//// removed from the file and that any derivative work contains  ////
24 
//// the original copyright notice and the associated disclaimer. ////
25 
////                                                              ////
26 
//// This source file is free software; you can redistribute it   ////
27 
//// and/or modify it under the terms of the GNU Lesser General   ////
28 
//// Public License as published by the Free Software Foundation; ////
29 
//// either version 2.1 of the License, or (at your option) any   ////
30 
//// later version.                                               ////
31 
////                                                              ////
32 
//// This source is distributed in the hope that it will be       ////
33 
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
34 
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
35 
//// PURPOSE.  See the GNU Lesser General Public License for more ////
36 
//// details.                                                     ////
37 
////                                                              ////
38 
//// You should have received a copy of the GNU Lesser General    ////
39 
//// Public License along with this source; if not, download it   ////
40 
//// from http://www.opencores.org/lgpl.shtml                     ////
41 
////                                                              ////
42 
//////////////////////////////////////////////////////////////////////
43 
//
44 
// CVS Revision History
45 
//
46 
// $Log: not supported by cvs2svn $
47 
// Revision 1.44  2005/10/19 11:37:56  jcastillo
48 
// Added support for RAMB16 Xilinx4/Spartan3 primitives
49 
//
50 
// Revision 1.43  2005/01/07 09:23:39  andreje
51 
// l.ff1 and l.cmov instructions added
52 
//
53 
// Revision 1.42  2004/06/08 18:17:36  lampret
54 
// Non-functional changes. Coding style fixes.
55 
//
56 
// Revision 1.41  2004/05/09 20:03:20  lampret
57 
// By default l.cust5 insns are disabled
58 
//
59 
// Revision 1.40  2004/05/09 19:49:04  lampret
60 
// Added some l.cust5 custom instructions as example
61 
//
62 
// Revision 1.39  2004/04/08 11:00:46  simont
63 
// Add support for 512B instruction cache.
64 
//
65 
// Revision 1.38  2004/04/05 08:29:57  lampret
66 
// Merged branch_qmem into main tree.
67 
//
68 
// Revision 1.35.4.6  2004/02/11 01:40:11  lampret
69 
// preliminary HW breakpoints support in debug unit (by default disabled). To enable define OR1200_DU_HWBKPTS.
70 
//
71 
// Revision 1.35.4.5  2004/01/15 06:46:38  markom
72 
// interface to debug changed; no more opselect; stb-ack protocol
73 
//
74 
// Revision 1.35.4.4  2004/01/11 22:45:46  andreje
75 
// Separate instruction and data QMEM decoders, QMEM acknowledge and byte-select added
76 
//
77 
// Revision 1.35.4.3  2003/12/17 13:43:38  simons
78 
// Exception prefix configuration changed.
79 
//
80 
// Revision 1.35.4.2  2003/12/05 00:05:03  lampret
81 
// Static exception prefix.
82 
//
83 
// Revision 1.35.4.1  2003/07/08 15:36:37  lampret
84 
// Added embedded memory QMEM.
85 
//
86 
// Revision 1.35  2003/04/24 00:16:07  lampret
87 
// No functional changes. Added defines to disable implementation of multiplier/MAC
88 
//
89 
// Revision 1.34  2003/04/20 22:23:57  lampret
90 
// No functional change. Only added customization for exception vectors.
91 
//
92 
// Revision 1.33  2003/04/07 20:56:07  lampret
93 
// Fixed OR1200_CLKDIV_x_SUPPORTED defines. Better description.
94 
//
95 
// Revision 1.32  2003/04/07 01:26:57  lampret
96 
// RFRAM defines comments updated. Altera LPM option added.
97 
//
98 
// Revision 1.31  2002/12/08 08:57:56  lampret
99 
// Added optional support for WB B3 specification (xwb_cti_o, xwb_bte_o). Made xwb_cab_o optional.
100 
//
101 
// Revision 1.30  2002/10/28 15:09:22  mohor
102 
// Previous check-in was done by mistake.
103 
//
104 
// Revision 1.29  2002/10/28 15:03:50  mohor
105 
// Signal scanb_sen renamed to scanb_en.
106 
//
107 
// Revision 1.28  2002/10/17 20:04:40  lampret
108 
// Added BIST scan. Special VS RAMs need to be used to implement BIST.
109 
//
110 
// Revision 1.27  2002/09/16 03:13:23  lampret
111 
// Removed obsolete comment.
112 
//
113 
// Revision 1.26  2002/09/08 05:52:16  lampret
114 
// Added optional l.div/l.divu insns. By default they are disabled.
115 
//
116 
// Revision 1.25  2002/09/07 19:16:10  lampret
117 
// If SR[CY] implemented with OR1200_IMPL_ADDC enabled, l.add/l.addi also set SR[CY].
118 
//
119 
// Revision 1.24  2002/09/07 05:42:02  lampret
120 
// Added optional SR[CY]. Added define to enable additional (compare) flag modifiers. Defines are OR1200_IMPL_ADDC and OR1200_ADDITIONAL_FLAG_MODIFIERS.
121 
//
122 
// Revision 1.23  2002/09/04 00:50:34  lampret
123 
// Now most of the configuration registers are updatded automatically based on defines in or1200_defines.v.
124 
//
125 
// Revision 1.22  2002/09/03 22:28:21  lampret
126 
// As per Taylor Su suggestion all case blocks are full case by default and optionally (OR1200_CASE_DEFAULT) can be disabled to increase clock frequncy.
127 
//
128 
// Revision 1.21  2002/08/22 02:18:55  lampret
129 
// Store buffer has been tested and it works. BY default it is still disabled until uClinux confirms correct operation on FPGA board.
130 
//
131 
// Revision 1.20  2002/08/18 21:59:45  lampret
132 
// Disable SB until it is tested
133 
//
134 
// Revision 1.19  2002/08/18 19:53:08  lampret
135 
// Added store buffer.
136 
//
137 
// Revision 1.18  2002/08/15 06:04:11  lampret
138 
// Fixed Xilinx trace buffer address. REported by Taylor Su.
139 
//
140 
// Revision 1.17  2002/08/12 05:31:44  lampret
141 
// Added OR1200_WB_RETRY. Moved WB registered outsputs / samples inputs into lower section.
142 
//
143 
// Revision 1.16  2002/07/14 22:17:17  lampret
144 
// Added simple trace buffer [only for Xilinx Virtex target]. Fixed instruction fetch abort when new exception is recognized.
145 
//
146 
// Revision 1.15  2002/06/08 16:20:21  lampret
147 
// Added defines for enabling generic FF based memory macro for register file.
148 
//
149 
// Revision 1.14  2002/03/29 16:24:06  lampret
150 
// Changed comment about synopsys to _synopsys_ because synthesis was complaining about unknown directives
151 
//
152 
// Revision 1.13  2002/03/29 15:16:55  lampret
153 
// Some of the warnings fixed.
154 
//
155 
// Revision 1.12  2002/03/28 19:25:42  lampret
156 
// Added second type of Virtual Silicon two-port SRAM (for register file). Changed defines for VS STP RAMs.
157 
//
158 
// Revision 1.11  2002/03/28 19:13:17  lampret
159 
// Updated defines.
160 
//
161 
// Revision 1.10  2002/03/14 00:30:24  lampret
162 
// Added alternative for critical path in DU.
163 
//
164 
// Revision 1.9  2002/03/11 01:26:26  lampret
165 
// Fixed async loop. Changed multiplier type for ASIC.
166 
//
167 
// Revision 1.8  2002/02/11 04:33:17  lampret
168 
// Speed optimizations (removed duplicate _cyc_ and _stb_). Fixed D/IMMU cache-inhibit attr.
169 
//
170 
// Revision 1.7  2002/02/01 19:56:54  lampret
171 
// Fixed combinational loops.
172 
//
173 
// Revision 1.6  2002/01/19 14:10:22  lampret
174 
// Fixed OR1200_XILINX_RAM32X1D.
175 
//
176 
// Revision 1.5  2002/01/18 07:56:00  lampret
177 
// No more low/high priority interrupts (PICPR removed). Added tick timer exception. Added exception prefix (SR[EPH]). Fixed single-step bug whenreading NPC.
178 
//
179 
// Revision 1.4  2002/01/14 09:44:12  lampret
180 
// Default ASIC configuration does not sample WB inputs.
181 
//
182 
// Revision 1.3  2002/01/08 00:51:08  lampret
183 
// Fixed typo. OR1200_REGISTERED_OUTPUTS was not defined. Should be.
184 
//
185 
// Revision 1.2  2002/01/03 21:23:03  lampret
186 
// Uncommented OR1200_REGISTERED_OUTPUTS for FPGA target.
187 
//
188 
// Revision 1.1  2002/01/03 08:16:15  lampret
189 
// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs.
190 
//
191 
// Revision 1.20  2001/12/04 05:02:36  lampret
192 
// Added OR1200_GENERIC_MULTP2_32X32 and OR1200_ASIC_MULTP2_32X32
193 
//
194 
// Revision 1.19  2001/11/27 19:46:57  lampret
195 
// Now FPGA and ASIC target are separate.
196 
//
197 
// Revision 1.18  2001/11/23 21:42:31  simons
198 
// Program counter divided to PPC and NPC.
199 
//
200 
// Revision 1.17  2001/11/23 08:38:51  lampret
201 
// Changed DSR/DRR behavior and exception detection.
202 
//
203 
// Revision 1.16  2001/11/20 21:30:38  lampret
204 
// Added OR1200_REGISTERED_INPUTS.
205 
//
206 
// Revision 1.15  2001/11/19 14:29:48  simons
207 
// Cashes disabled.
208 
//
209 
// Revision 1.14  2001/11/13 10:02:21  lampret
210 
// Added 'setpc'. Renamed some signals (except_flushpipe into flushpipe etc)
211 
//
212 
// Revision 1.13  2001/11/12 01:45:40  lampret
213 
// Moved flag bit into SR. Changed RF enable from constant enable to dynamic enable for read ports.
214 
//
215 
// Revision 1.12  2001/11/10 03:43:57  lampret
216 
// Fixed exceptions.
217 
//
218 
// Revision 1.11  2001/11/02 18:57:14  lampret
219 
// Modified virtual silicon instantiations.
220 
//
221 
// Revision 1.10  2001/10/21 17:57:16  lampret
222 
// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF.
223 
//
224 
// Revision 1.9  2001/10/19 23:28:46  lampret
225 
// Fixed some synthesis warnings. Configured with caches and MMUs.
226 
//
227 
// Revision 1.8  2001/10/14 13:12:09  lampret
228 
// MP3 version.
229 
//
230 
// Revision 1.1.1.1  2001/10/06 10:18:36  igorm
231 
// no message
232 
//
233 
// Revision 1.3  2001/08/17 08:01:19  lampret
234 
// IC enable/disable.
235 
//
236 
// Revision 1.2  2001/08/13 03:36:20  lampret
237 
// Added cfg regs. Moved all defines into one defines.v file. More cleanup.
238 
//
239 
// Revision 1.1  2001/08/09 13:39:33  lampret
240 
// Major clean-up.
241 
//
242 
// Revision 1.2  2001/07/22 03:31:54  lampret
243 
// Fixed RAM's oen bug. Cache bypass under development.
244 
//
245 
// Revision 1.1  2001/07/20 00:46:03  lampret
246 
// Development version of RTL. Libraries are missing.
247 
//
248 
//
249 
 
250 
//
251 
// Dump VCD
252 
//
253 
//`define OR1200_VCD_DUMP
254 
 
255 
//
256 
// Generate debug messages during simulation
257 
//
258 
//`define OR1200_VERBOSE
259 
 
260 
//  `define OR1200_ASIC
261 
////////////////////////////////////////////////////////
262 
//
263 
// Typical configuration for an ASIC
264 
//
265 
`ifdef OR1200_ASIC
266 
 
267 
//
268 
// Target ASIC memories
269 
//
270 
//`define OR1200_ARTISAN_SSP
271 
//`define OR1200_ARTISAN_SDP
272 
//`define OR1200_ARTISAN_STP
273 
`define OR1200_VIRTUALSILICON_SSP
274 
//`define OR1200_VIRTUALSILICON_STP_T1
275 
//`define OR1200_VIRTUALSILICON_STP_T2
276 
 
277 
//
278 
// Do not implement Data cache
279 
//
280 
//`define OR1200_NO_DC
281 
 
282 
//
283 
// Do not implement Insn cache
284 
//
285 
//`define OR1200_NO_IC
286 
 
287 
//
288 
// Do not implement Data MMU
289 
//
290 
//`define OR1200_NO_DMMU
291 
 
292 
//
293 
// Do not implement Insn MMU
294 
//
295 
//`define OR1200_NO_IMMU
296 
 
297 
//
298 
// Select between ASIC optimized and generic multiplier
299 
//
300 
//`define OR1200_ASIC_MULTP2_32X32
301 
`define OR1200_GENERIC_MULTP2_32X32
302 
 
303 
//
304 
// Size/type of insn/data cache if implemented
305 
//
306 
// `define OR1200_IC_1W_512B
307 
// `define OR1200_IC_1W_4KB
308 
`define OR1200_IC_1W_8KB
309 
// `define OR1200_DC_1W_4KB
310 
`define OR1200_DC_1W_8KB
311 
 
312 
`else
313 
 
314 
 
315 
/////////////////////////////////////////////////////////
316 
//
317 
// Typical configuration for an FPGA
318 
//
319 
 
320 
//
321 
// Target FPGA memories
322 
//
323 
//`define OR1200_ALTERA_LPM
324 
`define OR1200_XILINX_RAMB16
325 
//`define OR1200_XILINX_RAMB4
326 
//`define OR1200_XILINX_RAM32X1D
327 
//`define OR1200_USE_RAM16X1D_FOR_RAM32X1D
328 
 
329 
//
330 
// Do not implement Data cache
331 
//
332 
`define OR1200_NO_DC
333 
 
334 
//
335 
// Do not implement Insn cache
336 
//
337 
`define OR1200_NO_IC
338 
 
339 
//
340 
// Do not implement Data MMU
341 
//
342 
`define OR1200_NO_DMMU
343 
 
344 
//
345 
// Do not implement Insn MMU
346 
//
347 
`define OR1200_NO_IMMU
348 
 
349 
//
350 
// Select between ASIC and generic multiplier
351 
//
352 
// (Generic seems to trigger a bug in the Cadence Ncsim simulator)
353 
//
354 
//`define OR1200_ASIC_MULTP2_32X32
355 
`define OR1200_GENERIC_MULTP2_32X32
356 
 
357 
//
358 
// Size/type of insn/data cache if implemented
359 
// (consider available FPGA memory resources)
360 
//
361 
//`define OR1200_IC_1W_512B
362 
`define OR1200_IC_1W_4KB
363 
//`define OR1200_IC_1W_8KB
364 
`define OR1200_DC_1W_4KB
365 
//`define OR1200_DC_1W_8KB
366 
 
367 
`endif
368 
 
369 
 
370 
//////////////////////////////////////////////////////////
371 
//
372 
// Do not change below unless you know what you are doing
373 
//
374 
 
375 
//
376 
// Enable RAM BIST
377 
//
378 
// At the moment this only works for Virtual Silicon
379 
// single port RAMs. For other RAMs it has not effect.
380 
// Special wrapper for VS RAMs needs to be provided
381 
// with scan flops to facilitate bist scan.
382 
//
383 
//`define OR1200_BIST
384 
 
385 
//
386 
// Register OR1200 WISHBONE outputs
387 
// (must be defined/enabled)
388 
//
389 
`define OR1200_REGISTERED_OUTPUTS
390 
 
391 
//
392 
// Register OR1200 WISHBONE inputs
393 
//
394 
// (must be undefined/disabled)
395 
//
396 
//`define OR1200_REGISTERED_INPUTS
397 
 
398 
//
399 
// Disable bursts if they are not supported by the
400 
// memory subsystem (only affect cache line fill)
401 
//
402 
//`define OR1200_NO_BURSTS
403 
//
404 
 
405 
//
406 
// WISHBONE retry counter range
407 
//
408 
// 2^value range for retry counter. Retry counter
409 
// is activated whenever *wb_rty_i is asserted and
410 
// until retry counter expires, corresponding
411 
// WISHBONE interface is deactivated.
412 
//
413 
// To disable retry counters and *wb_rty_i all together,
414 
// undefine this macro.
415 
//
416 
//`define OR1200_WB_RETRY 7
417 
 
418 
//
419 
// WISHBONE Consecutive Address Burst
420 
//
421 
// This was used prior to WISHBONE B3 specification
422 
// to identify bursts. It is no longer needed but
423 
// remains enabled for compatibility with old designs.
424 
//
425 
// To remove *wb_cab_o ports undefine this macro.
426 
//
427 
`define OR1200_WB_CAB
428 
 
429 
//
430 
// WISHBONE B3 compatible interface
431 
//
432 
// This follows the WISHBONE B3 specification.
433 
// It is not enabled by default because most
434 
// designs still don't use WB b3.
435 
//
436 
// To enable *wb_cti_o/*wb_bte_o ports,
437 
// define this macro.
438 
//
439 
//`define OR1200_WB_B3
440 
 
441 
//
442 
// Enable additional synthesis directives if using
443 
// _Synopsys_ synthesis tool
444 
//
445 
//`define OR1200_ADDITIONAL_SYNOPSYS_DIRECTIVES
446 
 
447 
//
448 
// Enables default statement in some case blocks
449 
// and disables Synopsys synthesis directive full_case
450 
//
451 
// By default it is enabled. When disabled it
452 
// can increase clock frequency.
453 
//
454 
`define OR1200_CASE_DEFAULT
455 
 
456 
//
457 
// Operand width / register file address width
458 
//
459 
// (DO NOT CHANGE)
460 
//
461 
`define OR1200_OPERAND_WIDTH            32
462 
`define OR1200_REGFILE_ADDR_WIDTH       5
463 
 
464 
//
465 
// l.add/l.addi/l.and and optional l.addc/l.addic
466 
// also set (compare) flag when result of their
467 
// operation equals zero
468 
//
469 
// At the time of writing this, default or32
470 
// C/C++ compiler doesn't generate code that
471 
// would benefit from this optimization.
472 
//
473 
// By default this optimization is disabled to
474 
// save area.
475 
//
476 
//`define OR1200_ADDITIONAL_FLAG_MODIFIERS
477 
 
478 
//
479 
// Implement l.addc/l.addic instructions
480 
//
481 
// By default implementation of l.addc/l.addic
482 
// instructions is enabled in case you need them.
483 
// If you don't use them, then disable implementation
484 
// to save area.
485 
//
486 
`define OR1200_IMPL_ADDC
487 
 
488 
//
489 
// Implement carry bit SR[CY]
490 
//
491 
// By default implementation of SR[CY] is enabled
492 
// to be compliant with the simulator. However
493 
// SR[CY] is explicitly only used by l.addc/l.addic
494 
// instructions and if these two insns are not
495 
// implemented there is not much point having SR[CY].
496 
//
497 
`define OR1200_IMPL_CY
498 
 
499 
//
500 
// Implement optional l.div/l.divu instructions
501 
//
502 
// By default divide instructions are not implemented
503 
// to save area and increase clock frequency. or32 C/C++
504 
// compiler can use soft library for division.
505 
//
506 
// To implement divide, multiplier needs to be implemented.
507 
//
508 
//`define OR1200_IMPL_DIV
509 
 
510 
//
511 
// Implement rotate in the ALU
512 
//
513 
// At the time of writing this, or32
514 
// C/C++ compiler doesn't generate rotate
515 
// instructions. However or32 assembler
516 
// can assemble code that uses rotate insn.
517 
// This means that rotate instructions
518 
// must be used manually inserted.
519 
//
520 
// By default implementation of rotate
521 
// is disabled to save area and increase
522 
// clock frequency.
523 
//
524 
//`define OR1200_IMPL_ALU_ROTATE
525 
 
526 
//
527 
// Type of ALU compare to implement
528 
//
529 
// Try either one to find what yields
530 
// higher clock frequencyin your case.
531 
//
532 
//`define OR1200_IMPL_ALU_COMP1
533 
`define OR1200_IMPL_ALU_COMP2
534 
 
535 
//
536 
// Implement multiplier
537 
//
538 
// By default multiplier is implemented
539 
//
540 
`define OR1200_MULT_IMPLEMENTED
541 
 
542 
//
543 
// Implement multiply-and-accumulate
544 
//
545 
// By default MAC is implemented. To
546 
// implement MAC, multiplier needs to be
547 
// implemented.
548 
//
549 
`define OR1200_MAC_IMPLEMENTED
550 
 
551 
//
552 
// Low power, slower multiplier
553 
//
554 
// Select between low-power (larger) multiplier
555 
// and faster multiplier. The actual difference
556 
// is only AND logic that prevents distribution
557 
// of operands into the multiplier when instruction
558 
// in execution is not multiply instruction
559 
//
560 
//`define OR1200_LOWPWR_MULT
561 
 
562 
//
563 
// Clock ratio RISC clock versus WB clock
564 
//
565 
// If you plan to run WB:RISC clock fixed to 1:1, disable
566 
// both defines
567 
//
568 
// For WB:RISC 1:2 or 1:1, enable OR1200_CLKDIV_2_SUPPORTED
569 
// and use clmode to set ratio
570 
//
571 
// For WB:RISC 1:4, 1:2 or 1:1, enable both defines and use
572 
// clmode to set ratio
573 
//
574 
`define OR1200_CLKDIV_2_SUPPORTED
575 
//`define OR1200_CLKDIV_4_SUPPORTED
576 
 
577 
//
578 
// Type of register file RAM
579 
//
580 
// Memory macro w/ two ports (see or1200_tpram_32x32.v)
581 
//`define OR1200_RFRAM_TWOPORT
582 
//
583 
// Memory macro dual port (see or1200_dpram_32x32.v)
584 
`define OR1200_RFRAM_DUALPORT
585 
//
586 
// Generic (flip-flop based) register file (see or1200_rfram_generic.v)
587 
//`define OR1200_RFRAM_GENERIC
588 
 
589 
//
590 
// Type of mem2reg aligner to implement.
591 
//
592 
// Once OR1200_IMPL_MEM2REG2 yielded faster
593 
// circuit, however with today tools it will
594 
// most probably give you slower circuit.
595 
//
596 
`define OR1200_IMPL_MEM2REG1
597 
//`define OR1200_IMPL_MEM2REG2
598 
 
599 
//
600 
// ALUOPs
601 
//
602 
`define OR1200_ALUOP_WIDTH      4
603 
`define OR1200_ALUOP_NOP        4'd4
604 
/* Order defined by arith insns that have two source operands both in regs
605 
   (see binutils/include/opcode/or32.h) */
606 
`define OR1200_ALUOP_ADD        4'd0
607 
`define OR1200_ALUOP_ADDC       4'd1
608 
`define OR1200_ALUOP_SUB        4'd2
609 
`define OR1200_ALUOP_AND        4'd3
610 
`define OR1200_ALUOP_OR         4'd4
611 
`define OR1200_ALUOP_XOR        4'd5
612 
`define OR1200_ALUOP_MUL        4'd6
613 
`define OR1200_ALUOP_CUST5      4'd7
614 
`define OR1200_ALUOP_SHROT      4'd8
615 
`define OR1200_ALUOP_DIV        4'd9
616 
`define OR1200_ALUOP_DIVU       4'd10
617 
/* Order not specifically defined. */
618 
`define OR1200_ALUOP_IMM        4'd11
619 
`define OR1200_ALUOP_MOVHI      4'd12
620 
`define OR1200_ALUOP_COMP       4'd13
621 
`define OR1200_ALUOP_MTSR       4'd14
622 
`define OR1200_ALUOP_MFSR       4'd15
623 
`define OR1200_ALUOP_CMOV 4'd14
624 
`define OR1200_ALUOP_FF1  4'd15
625 
//
626 
// MACOPs
627 
//
628 
`define OR1200_MACOP_WIDTH      2
629 
`define OR1200_MACOP_NOP        2'b00
630 
`define OR1200_MACOP_MAC        2'b01
631 
`define OR1200_MACOP_MSB        2'b10
632 
 
633 
//
634 
// Shift/rotate ops
635 
//
636 
`define OR1200_SHROTOP_WIDTH    2
637 
`define OR1200_SHROTOP_NOP      2'd0
638 
`define OR1200_SHROTOP_SLL      2'd0
639 
`define OR1200_SHROTOP_SRL      2'd1
640 
`define OR1200_SHROTOP_SRA      2'd2
641 
`define OR1200_SHROTOP_ROR      2'd3
642 
 
643 
// Execution cycles per instruction
644 
`define OR1200_MULTICYCLE_WIDTH 2
645 
`define OR1200_ONE_CYCLE                2'd0
646 
`define OR1200_TWO_CYCLES               2'd1
647 
 
648 
// Operand MUX selects
649 
`define OR1200_SEL_WIDTH                2
650 
`define OR1200_SEL_RF                   2'd0
651 
`define OR1200_SEL_IMM                  2'd1
652 
`define OR1200_SEL_EX_FORW              2'd2
653 
`define OR1200_SEL_WB_FORW              2'd3
654 
 
655 
//
656 
// BRANCHOPs
657 
//
658 
`define OR1200_BRANCHOP_WIDTH           3
659 
`define OR1200_BRANCHOP_NOP             3'd0
660 
`define OR1200_BRANCHOP_J               3'd1
661 
`define OR1200_BRANCHOP_JR              3'd2
662 
`define OR1200_BRANCHOP_BAL             3'd3
663 
`define OR1200_BRANCHOP_BF              3'd4
664 
`define OR1200_BRANCHOP_BNF             3'd5
665 
`define OR1200_BRANCHOP_RFE             3'd6
666 
 
667 
//
668 
// LSUOPs
669 
//
670 
// Bit 0: sign extend
671 
// Bits 1-2: 00 doubleword, 01 byte, 10 halfword, 11 singleword
672 
// Bit 3: 0 load, 1 store
673 
`define OR1200_LSUOP_WIDTH              4
674 
`define OR1200_LSUOP_NOP                4'b0000
675 
`define OR1200_LSUOP_LBZ                4'b0010
676 
`define OR1200_LSUOP_LBS                4'b0011
677 
`define OR1200_LSUOP_LHZ                4'b0100
678 
`define OR1200_LSUOP_LHS                4'b0101
679 
`define OR1200_LSUOP_LWZ                4'b0110
680 
`define OR1200_LSUOP_LWS                4'b0111
681 
`define OR1200_LSUOP_LD         4'b0001
682 
`define OR1200_LSUOP_SD         4'b1000
683 
`define OR1200_LSUOP_SB         4'b1010
684 
`define OR1200_LSUOP_SH         4'b1100
685 
`define OR1200_LSUOP_SW         4'b1110
686 
 
687 
// FETCHOPs
688 
`define OR1200_FETCHOP_WIDTH            1
689 
`define OR1200_FETCHOP_NOP              1'b0
690 
`define OR1200_FETCHOP_LW               1'b1
691 
 
692 
//
693 
// Register File Write-Back OPs
694 
//
695 
// Bit 0: register file write enable
696 
// Bits 2-1: write-back mux selects
697 
`define OR1200_RFWBOP_WIDTH             3
698 
`define OR1200_RFWBOP_NOP               3'b000
699 
`define OR1200_RFWBOP_ALU               3'b001
700 
`define OR1200_RFWBOP_LSU               3'b011
701 
`define OR1200_RFWBOP_SPRS              3'b101
702 
`define OR1200_RFWBOP_LR                3'b111
703 
 
704 
// Compare instructions
705 
`define OR1200_COP_SFEQ       3'b000
706 
`define OR1200_COP_SFNE       3'b001
707 
`define OR1200_COP_SFGT       3'b010
708 
`define OR1200_COP_SFGE       3'b011
709 
`define OR1200_COP_SFLT       3'b100
710 
`define OR1200_COP_SFLE       3'b101
711 
`define OR1200_COP_X          3'b111
712 
`define OR1200_SIGNED_COMPARE 'd3
713 
`define OR1200_COMPOP_WIDTH     4
714 
 
715 
//
716 
// TAGs for instruction bus
717 
//
718 
`define OR1200_ITAG_IDLE        4'h0    // idle bus
719 
`define OR1200_ITAG_NI          4'h1    // normal insn
720 
`define OR1200_ITAG_BE          4'hb    // Bus error exception
721 
`define OR1200_ITAG_PE          4'hc    // Page fault exception
722 
`define OR1200_ITAG_TE          4'hd    // TLB miss exception
723 
 
724 
//
725 
// TAGs for data bus
726 
//
727 
`define OR1200_DTAG_IDLE        4'h0    // idle bus
728 
`define OR1200_DTAG_ND          4'h1    // normal data
729 
`define OR1200_DTAG_AE          4'ha    // Alignment exception
730 
`define OR1200_DTAG_BE          4'hb    // Bus error exception
731 
`define OR1200_DTAG_PE          4'hc    // Page fault exception
732 
`define OR1200_DTAG_TE          4'hd    // TLB miss exception
733 
 
734 
 
735 
//////////////////////////////////////////////
736 
//
737 
// ORBIS32 ISA specifics
738 
//
739 
 
740 
// SHROT_OP position in machine word
741 
`define OR1200_SHROTOP_POS              7:6
742 
 
743 
// ALU instructions multicycle field in machine word
744 
`define OR1200_ALUMCYC_POS              9:8
745 
 
746 
//
747 
// Instruction opcode groups (basic)
748 
//
749 
`define OR1200_OR32_J                 6'b000000
750 
`define OR1200_OR32_JAL               6'b000001
751 
`define OR1200_OR32_BNF               6'b000011
752 
`define OR1200_OR32_BF                6'b000100
753 
`define OR1200_OR32_NOP               6'b000101
754 
`define OR1200_OR32_MOVHI             6'b000110
755 
`define OR1200_OR32_XSYNC             6'b001000
756 
`define OR1200_OR32_RFE               6'b001001
757 
/* */
758 
`define OR1200_OR32_JR                6'b010001
759 
`define OR1200_OR32_JALR              6'b010010
760 
`define OR1200_OR32_MACI              6'b010011
761 
/* */
762 
`define OR1200_OR32_LWZ               6'b100001
763 
`define OR1200_OR32_LBZ               6'b100011
764 
`define OR1200_OR32_LBS               6'b100100
765 
`define OR1200_OR32_LHZ               6'b100101
766 
`define OR1200_OR32_LHS               6'b100110
767 
`define OR1200_OR32_ADDI              6'b100111
768 
`define OR1200_OR32_ADDIC             6'b101000
769 
`define OR1200_OR32_ANDI              6'b101001
770 
`define OR1200_OR32_ORI               6'b101010
771 
`define OR1200_OR32_XORI              6'b101011
772 
`define OR1200_OR32_MULI              6'b101100
773 
`define OR1200_OR32_MFSPR             6'b101101
774 
`define OR1200_OR32_SH_ROTI           6'b101110
775 
`define OR1200_OR32_SFXXI             6'b101111
776 
/* */
777 
`define OR1200_OR32_MTSPR             6'b110000
778 
`define OR1200_OR32_MACMSB            6'b110001
779 
/* */
780 
`define OR1200_OR32_SW                6'b110101
781 
`define OR1200_OR32_SB                6'b110110
782 
`define OR1200_OR32_SH                6'b110111
783 
`define OR1200_OR32_ALU               6'b111000
784 
`define OR1200_OR32_SFXX              6'b111001
785 
//`define OR1200_OR32_CUST5             6'b111100
786 
 
787 
 
788 
/////////////////////////////////////////////////////
789 
//
790 
// Exceptions
791 
//
792 
 
793 
//
794 
// Exception vectors per OR1K architecture:
795 
// 0xPPPPP100 - reset
796 
// 0xPPPPP200 - bus error
797 
// ... etc
798 
// where P represents exception prefix.
799 
//
800 
// Exception vectors can be customized as per
801 
// the following formula:
802 
// 0xPPPPPNVV - exception N
803 
//
804 
// P represents exception prefix
805 
// N represents exception N
806 
// VV represents length of the individual vector space,
807 
//   usually it is 8 bits wide and starts with all bits zero
808 
//
809 
 
810 
//
811 
// PPPPP and VV parts
812 
//
813 
// Sum of these two defines needs to be 28
814 
//
815 
`define OR1200_EXCEPT_EPH0_P 20'h00000
816 
`define OR1200_EXCEPT_EPH1_P 20'hF0000
817 
`define OR1200_EXCEPT_V            8'h00
818 
 
819 
//
820 
// N part width
821 
//
822 
`define OR1200_EXCEPT_WIDTH 4
823 
 
824 
//
825 
// Definition of exception vectors
826 
//
827 
// To avoid implementation of a certain exception,
828 
// simply comment out corresponding line
829 
//
830 
`define OR1200_EXCEPT_UNUSED            `OR1200_EXCEPT_WIDTH'hf
831 
`define OR1200_EXCEPT_TRAP              `OR1200_EXCEPT_WIDTH'he
832 
`define OR1200_EXCEPT_BREAK             `OR1200_EXCEPT_WIDTH'hd
833 
`define OR1200_EXCEPT_SYSCALL           `OR1200_EXCEPT_WIDTH'hc
834 
`define OR1200_EXCEPT_RANGE             `OR1200_EXCEPT_WIDTH'hb
835 
`define OR1200_EXCEPT_ITLBMISS          `OR1200_EXCEPT_WIDTH'ha
836 
`define OR1200_EXCEPT_DTLBMISS          `OR1200_EXCEPT_WIDTH'h9
837 
`define OR1200_EXCEPT_INT               `OR1200_EXCEPT_WIDTH'h8
838 
`define OR1200_EXCEPT_ILLEGAL           `OR1200_EXCEPT_WIDTH'h7
839 
`define OR1200_EXCEPT_ALIGN             `OR1200_EXCEPT_WIDTH'h6
840 
`define OR1200_EXCEPT_TICK              `OR1200_EXCEPT_WIDTH'h5
841 
`define OR1200_EXCEPT_IPF               `OR1200_EXCEPT_WIDTH'h4
842 
`define OR1200_EXCEPT_DPF               `OR1200_EXCEPT_WIDTH'h3
843 
`define OR1200_EXCEPT_BUSERR            `OR1200_EXCEPT_WIDTH'h2
844 
`define OR1200_EXCEPT_RESET             `OR1200_EXCEPT_WIDTH'h1
845 
`define OR1200_EXCEPT_NONE              `OR1200_EXCEPT_WIDTH'h0
846 
 
847 
 
848 
/////////////////////////////////////////////////////
849 
//
850 
// SPR groups
851 
//
852 
 
853 
// Bits that define the group
854 
`define OR1200_SPR_GROUP_BITS   15:11
855 
 
856 
// Width of the group bits
857 
`define OR1200_SPR_GROUP_WIDTH  5
858 
 
859 
// Bits that define offset inside the group
860 
`define OR1200_SPR_OFS_BITS 10:0
861 
 
862 
// List of groups
863 
`define OR1200_SPR_GROUP_SYS    5'd00
864 
`define OR1200_SPR_GROUP_DMMU   5'd01
865 
`define OR1200_SPR_GROUP_IMMU   5'd02
866 
`define OR1200_SPR_GROUP_DC     5'd03
867 
`define OR1200_SPR_GROUP_IC     5'd04
868 
`define OR1200_SPR_GROUP_MAC    5'd05
869 
`define OR1200_SPR_GROUP_DU     5'd06
870 
`define OR1200_SPR_GROUP_PM     5'd08
871 
`define OR1200_SPR_GROUP_PIC    5'd09
872 
`define OR1200_SPR_GROUP_TT     5'd10
873 
 
874 
 
875 
/////////////////////////////////////////////////////
876 
//
877 
// System group
878 
//
879 
 
880 
//
881 
// System registers
882 
//
883 
`define OR1200_SPR_CFGR         7'd0
884 
`define OR1200_SPR_RF           6'd32   // 1024 >> 5
885 
`define OR1200_SPR_NPC          11'd16
886 
`define OR1200_SPR_SR           11'd17
887 
`define OR1200_SPR_PPC          11'd18
888 
`define OR1200_SPR_EPCR         11'd32
889 
`define OR1200_SPR_EEAR         11'd48
890 
`define OR1200_SPR_ESR          11'd64
891 
 
892 
//
893 
// SR bits
894 
//
895 
`define OR1200_SR_WIDTH 16
896 
`define OR1200_SR_SM   0
897 
`define OR1200_SR_TEE  1
898 
`define OR1200_SR_IEE  2
899 
`define OR1200_SR_DCE  3
900 
`define OR1200_SR_ICE  4
901 
`define OR1200_SR_DME  5
902 
`define OR1200_SR_IME  6
903 
`define OR1200_SR_LEE  7
904 
`define OR1200_SR_CE   8
905 
`define OR1200_SR_F    9
906 
`define OR1200_SR_CY   10       // Unused
907 
`define OR1200_SR_OV   11       // Unused
908 
`define OR1200_SR_OVE  12       // Unused
909 
`define OR1200_SR_DSX  13       // Unused
910 
`define OR1200_SR_EPH  14
911 
`define OR1200_SR_FO   15
912 
`define OR1200_SR_CID  31:28    // Unimplemented
913 
 
914 
//
915 
// Bits that define offset inside the group
916 
//
917 
`define OR1200_SPROFS_BITS 10:0
918 
 
919 
//
920 
// Default Exception Prefix
921 
//
922 
// 1'b0 - OR1200_EXCEPT_EPH0_P (0x0000_0000)
923 
// 1'b1 - OR1200_EXCEPT_EPH1_P (0xF000_0000)
924 
//
925 
`define OR1200_SR_EPH_DEF       1'b0
926 
 
927 
/////////////////////////////////////////////////////
928 
//
929 
// Power Management (PM)
930 
//
931 
 
932 
// Define it if you want PM implemented
933 
//`define OR1200_PM_IMPLEMENTED
934 
 
935 
// Bit positions inside PMR (don't change)
936 
`define OR1200_PM_PMR_SDF 3:0
937 
`define OR1200_PM_PMR_DME 4
938 
`define OR1200_PM_PMR_SME 5
939 
`define OR1200_PM_PMR_DCGE 6
940 
`define OR1200_PM_PMR_UNUSED 31:7
941 
 
942 
// PMR offset inside PM group of registers
943 
`define OR1200_PM_OFS_PMR 11'b0
944 
 
945 
// PM group
946 
`define OR1200_SPRGRP_PM 5'd8
947 
 
948 
// Define if PMR can be read/written at any address inside PM group
949 
`define OR1200_PM_PARTIAL_DECODING
950 
 
951 
// Define if reading PMR is allowed
952 
`define OR1200_PM_READREGS
953 
 
954 
// Define if unused PMR bits should be zero
955 
`define OR1200_PM_UNUSED_ZERO
956 
 
957 
 
958 
/////////////////////////////////////////////////////
959 
//
960 
// Debug Unit (DU)
961 
//
962 
 
963 
// Define it if you want DU implemented
964 
`define OR1200_DU_IMPLEMENTED
965 
 
966 
//
967 
// Define if you want HW Breakpoints
968 
// (if HW breakpoints are not implemented
969 
// only default software trapping is
970 
// possible with l.trap insn - this is
971 
// however already enough for use
972 
// with or32 gdb)
973 
//
974 
`define OR1200_DU_HWBKPTS
975 
 
976 
// Number of DVR/DCR pairs if HW breakpoints enabled
977 
`define OR1200_DU_DVRDCR_PAIRS 8
978 
 
979 
// Define if you want trace buffer
980 
//`define OR1200_DU_TB_IMPLEMENTED
981 
 
982 
//
983 
// Address offsets of DU registers inside DU group
984 
//
985 
// To not implement a register, doq not define its address
986 
//
987 
`ifdef OR1200_DU_HWBKPTS
988 
`define OR1200_DU_DVR0          11'd0
989 
`define OR1200_DU_DVR1          11'd1
990 
`define OR1200_DU_DVR2          11'd2
991 
`define OR1200_DU_DVR3          11'd3
992 
`define OR1200_DU_DVR4          11'd4
993 
`define OR1200_DU_DVR5          11'd5
994 
`define OR1200_DU_DVR6          11'd6
995 
`define OR1200_DU_DVR7          11'd7
996 
`define OR1200_DU_DCR0          11'd8
997 
`define OR1200_DU_DCR1          11'd9
998 
`define OR1200_DU_DCR2          11'd10
999 
`define OR1200_DU_DCR3          11'd11
1000 
`define OR1200_DU_DCR4          11'd12
1001 
`define OR1200_DU_DCR5          11'd13
1002 
`define OR1200_DU_DCR6          11'd14
1003 
`define OR1200_DU_DCR7          11'd15
1004 
`endif
1005 
`define OR1200_DU_DMR1          11'd16
1006 
`ifdef OR1200_DU_HWBKPTS
1007 
`define OR1200_DU_DMR2          11'd17
1008 
`define OR1200_DU_DWCR0         11'd18
1009 
`define OR1200_DU_DWCR1         11'd19
1010 
`endif
1011 
`define OR1200_DU_DSR           11'd20
1012 
`define OR1200_DU_DRR           11'd21
1013 
`ifdef OR1200_DU_TB_IMPLEMENTED
1014 
`define OR1200_DU_TBADR         11'h0ff
1015 
`define OR1200_DU_TBIA          11'h1xx
1016 
`define OR1200_DU_TBIM          11'h2xx
1017 
`define OR1200_DU_TBAR          11'h3xx
1018 
`define OR1200_DU_TBTS          11'h4xx
1019 
`endif
1020 
 
1021 
// Position of offset bits inside SPR address
1022 
`define OR1200_DUOFS_BITS       10:0
1023 
 
1024 
// DCR bits
1025 
`define OR1200_DU_DCR_DP        0
1026 
`define OR1200_DU_DCR_CC        3:1
1027 
`define OR1200_DU_DCR_SC        4
1028 
`define OR1200_DU_DCR_CT        7:5
1029 
 
1030 
// DMR1 bits
1031 
`define OR1200_DU_DMR1_CW0      1:0
1032 
`define OR1200_DU_DMR1_CW1      3:2
1033 
`define OR1200_DU_DMR1_CW2      5:4
1034 
`define OR1200_DU_DMR1_CW3      7:6
1035 
`define OR1200_DU_DMR1_CW4      9:8
1036 
`define OR1200_DU_DMR1_CW5      11:10
1037 
`define OR1200_DU_DMR1_CW6      13:12
1038 
`define OR1200_DU_DMR1_CW7      15:14
1039 
`define OR1200_DU_DMR1_CW8      17:16
1040 
`define OR1200_DU_DMR1_CW9      19:18
1041 
`define OR1200_DU_DMR1_RES      21:20
1042 
`define OR1200_DU_DMR1_ST       22
1043 
`define OR1200_DU_DMR1_BT       23
1044 
 
1045 
// DMR2 bits
1046 
`define OR1200_DU_DMR2_WCE0     0
1047 
`define OR1200_DU_DMR2_WCE1     1
1048 
`define OR1200_DU_DMR2_AWTC     11:2
1049 
`define OR1200_DU_DMR2_WGB      21:12
1050 
 
1051 
// DWCR bits
1052 
`define OR1200_DU_DWCR_COUNT    15:0
1053 
`define OR1200_DU_DWCR_MATCH    31:16
1054 
 
1055 
// DSR bits
1056 
`define OR1200_DU_DSR_WIDTH     14
1057 
`define OR1200_DU_DSR_RSTE      0
1058 
`define OR1200_DU_DSR_BUSEE     1
1059 
`define OR1200_DU_DSR_DPFE      2
1060 
`define OR1200_DU_DSR_IPFE      3
1061 
`define OR1200_DU_DSR_TTE       4
1062 
`define OR1200_DU_DSR_AE        5
1063 
`define OR1200_DU_DSR_IIE       6
1064 
`define OR1200_DU_DSR_IE        7
1065 
`define OR1200_DU_DSR_DME       8
1066 
`define OR1200_DU_DSR_IME       9
1067 
`define OR1200_DU_DSR_RE        10
1068 
`define OR1200_DU_DSR_SCE       11
1069 
`define OR1200_DU_DSR_BE        12
1070 
`define OR1200_DU_DSR_TE        13
1071 
 
1072 
// DRR bits
1073 
`define OR1200_DU_DRR_RSTE      0
1074 
`define OR1200_DU_DRR_BUSEE     1
1075 
`define OR1200_DU_DRR_DPFE      2
1076 
`define OR1200_DU_DRR_IPFE      3
1077 
`define OR1200_DU_DRR_TTE       4
1078 
`define OR1200_DU_DRR_AE        5
1079 
`define OR1200_DU_DRR_IIE       6
1080 
`define OR1200_DU_DRR_IE        7
1081 
`define OR1200_DU_DRR_DME       8
1082 
`define OR1200_DU_DRR_IME       9
1083 
`define OR1200_DU_DRR_RE        10
1084 
`define OR1200_DU_DRR_SCE       11
1085 
`define OR1200_DU_DRR_BE        12
1086 
`define OR1200_DU_DRR_TE        13
1087 
 
1088 
// Define if reading DU regs is allowed
1089 
`define OR1200_DU_READREGS
1090 
 
1091 
// Define if unused DU registers bits should be zero
1092 
`define OR1200_DU_UNUSED_ZERO
1093 
 
1094 
// Define if IF/LSU status is not needed by devel i/f
1095 
`define OR1200_DU_STATUS_UNIMPLEMENTED
1096 
 
1097 
/////////////////////////////////////////////////////
1098 
//
1099 
// Programmable Interrupt Controller (PIC)
1100 
//
1101 
 
1102 
// Define it if you want PIC implemented
1103 
`define OR1200_PIC_IMPLEMENTED
1104 
 
1105 
// Define number of interrupt inputs (2-31)
1106 
`define OR1200_PIC_INTS 20
1107 
 
1108 
// Address offsets of PIC registers inside PIC group
1109 
`define OR1200_PIC_OFS_PICMR 2'd0
1110 
`define OR1200_PIC_OFS_PICSR 2'd2
1111 
 
1112 
// Position of offset bits inside SPR address
1113 
`define OR1200_PICOFS_BITS 1:0
1114 
 
1115 
// Define if you want these PIC registers to be implemented
1116 
`define OR1200_PIC_PICMR
1117 
`define OR1200_PIC_PICSR
1118 
 
1119 
// Define if reading PIC registers is allowed
1120 
`define OR1200_PIC_READREGS
1121 
 
1122 
// Define if unused PIC register bits should be zero
1123 
`define OR1200_PIC_UNUSED_ZERO
1124 
 
1125 
 
1126 
/////////////////////////////////////////////////////
1127 
//
1128 
// Tick Timer (TT)
1129 
//
1130 
 
1131 
// Define it if you want TT implemented
1132 
`define OR1200_TT_IMPLEMENTED
1133 
 
1134 
// Address offsets of TT registers inside TT group
1135 
`define OR1200_TT_OFS_TTMR 1'd0
1136 
`define OR1200_TT_OFS_TTCR 1'd1
1137 
 
1138 
// Position of offset bits inside SPR group
1139 
`define OR1200_TTOFS_BITS 0
1140 
 
1141 
// Define if you want these TT registers to be implemented
1142 
`define OR1200_TT_TTMR
1143 
`define OR1200_TT_TTCR
1144 
 
1145 
// TTMR bits
1146 
`define OR1200_TT_TTMR_TP 27:0
1147 
`define OR1200_TT_TTMR_IP 28
1148 
`define OR1200_TT_TTMR_IE 29
1149 
`define OR1200_TT_TTMR_M 31:30
1150 
 
1151 
// Define if reading TT registers is allowed
1152 
`define OR1200_TT_READREGS
1153 
 
1154 
 
1155 
//////////////////////////////////////////////
1156 
//
1157 
// MAC
1158 
//
1159 
`define OR1200_MAC_ADDR         0        // MACLO 0xxxxxxxx1, MACHI 0xxxxxxxx0
1160 
`define OR1200_MAC_SPR_WE               // Define if MACLO/MACHI are SPR writable
1161 
 
1162 
//
1163 
// Shift {MACHI,MACLO} into destination register when executing l.macrc
1164 
//
1165 
// According to architecture manual there is no shift, so default value is 0.
1166 
//
1167 
// However the implementation has deviated in this from the arch manual and had hard coded shift by 28 bits which
1168 
// is a useful optimization for MP3 decoding (if using libmad fixed point library). Shifts are no longer
1169 
// default setup, but if you need to remain backward compatible, define your shift bits, which were normally
1170 
// dest_GPR = {MACHI,MACLO}[59:28]
1171 
`define OR1200_MAC_SHIFTBY      0        // 0 = According to arch manual, 28 = obsolete backward compatibility
1172 
 
1173 
 
1174 
//////////////////////////////////////////////
1175 
//
1176 
// Data MMU (DMMU)
1177 
//
1178 
 
1179 
//
1180 
// Address that selects between TLB TR and MR
1181 
//
1182 
`define OR1200_DTLB_TM_ADDR     7
1183 
 
1184 
//
1185 
// DTLBMR fields
1186 
//
1187 
`define OR1200_DTLBMR_V_BITS    0
1188 
`define OR1200_DTLBMR_CID_BITS  4:1
1189 
`define OR1200_DTLBMR_RES_BITS  11:5
1190 
`define OR1200_DTLBMR_VPN_BITS  31:13
1191 
 
1192 
//
1193 
// DTLBTR fields
1194 
//
1195 
`define OR1200_DTLBTR_CC_BITS   0
1196 
`define OR1200_DTLBTR_CI_BITS   1
1197 
`define OR1200_DTLBTR_WBC_BITS  2
1198 
`define OR1200_DTLBTR_WOM_BITS  3
1199 
`define OR1200_DTLBTR_A_BITS    4
1200 
`define OR1200_DTLBTR_D_BITS    5
1201 
`define OR1200_DTLBTR_URE_BITS  6
1202 
`define OR1200_DTLBTR_UWE_BITS  7
1203 
`define OR1200_DTLBTR_SRE_BITS  8
1204 
`define OR1200_DTLBTR_SWE_BITS  9
1205 
`define OR1200_DTLBTR_RES_BITS  11:10
1206 
`define OR1200_DTLBTR_PPN_BITS  31:13
1207 
 
1208 
//
1209 
// DTLB configuration
1210 
//
1211 
`define OR1200_DMMU_PS          13                                      // 13 for 8KB page size
1212 
`define OR1200_DTLB_INDXW       6                                       // 6 for 64 entry DTLB  7 for 128 entries
1213 
`define OR1200_DTLB_INDXL       `OR1200_DMMU_PS                         // 13                   13
1214 
`define OR1200_DTLB_INDXH       `OR1200_DMMU_PS+`OR1200_DTLB_INDXW-1    // 18                   19
1215 
`define OR1200_DTLB_INDX        `OR1200_DTLB_INDXH:`OR1200_DTLB_INDXL   // 18:13                19:13
1216 
`define OR1200_DTLB_TAGW        32-`OR1200_DTLB_INDXW-`OR1200_DMMU_PS   // 13                   12
1217 
`define OR1200_DTLB_TAGL        `OR1200_DTLB_INDXH+1                    // 19                   20
1218 
`define OR1200_DTLB_TAG         31:`OR1200_DTLB_TAGL                    // 31:19                31:20
1219 
`define OR1200_DTLBMRW          `OR1200_DTLB_TAGW+1                     // +1 because of V bit
1220 
`define OR1200_DTLBTRW          32-`OR1200_DMMU_PS+5                    // +5 because of protection bits and CI
1221 
 
1222 
//
1223 
// Cache inhibit while DMMU is not enabled/implemented
1224 
//
1225 
// cache inhibited 0GB-4GB              1'b1
1226 
// cache inhibited 0GB-2GB              !dcpu_adr_i[31]
1227 
// cache inhibited 0GB-1GB 2GB-3GB      !dcpu_adr_i[30]
1228 
// cache inhibited 1GB-2GB 3GB-4GB      dcpu_adr_i[30]
1229 
// cache inhibited 2GB-4GB (default)    dcpu_adr_i[31]
1230 
// cached 0GB-4GB                       1'b0
1231 
//
1232 
`define OR1200_DMMU_CI                  dcpu_adr_i[31]
1233 
 
1234 
 
1235 
//////////////////////////////////////////////
1236 
//
1237 
// Insn MMU (IMMU)
1238 
//
1239 
 
1240 
//
1241 
// Address that selects between TLB TR and MR
1242 
//
1243 
`define OR1200_ITLB_TM_ADDR     7
1244 
 
1245 
//
1246 
// ITLBMR fields
1247 
//
1248 
`define OR1200_ITLBMR_V_BITS    0
1249 
`define OR1200_ITLBMR_CID_BITS  4:1
1250 
`define OR1200_ITLBMR_RES_BITS  11:5
1251 
`define OR1200_ITLBMR_VPN_BITS  31:13
1252 
 
1253 
//
1254 
// ITLBTR fields
1255 
//
1256 
`define OR1200_ITLBTR_CC_BITS   0
1257 
`define OR1200_ITLBTR_CI_BITS   1
1258 
`define OR1200_ITLBTR_WBC_BITS  2
1259 
`define OR1200_ITLBTR_WOM_BITS  3
1260 
`define OR1200_ITLBTR_A_BITS    4
1261 
`define OR1200_ITLBTR_D_BITS    5
1262 
`define OR1200_ITLBTR_SXE_BITS  6
1263 
`define OR1200_ITLBTR_UXE_BITS  7
1264 
`define OR1200_ITLBTR_RES_BITS  11:8
1265 
`define OR1200_ITLBTR_PPN_BITS  31:13
1266 
 
1267 
//
1268 
// ITLB configuration
1269 
//
1270 
`define OR1200_IMMU_PS          13                                      // 13 for 8KB page size
1271 
`define OR1200_ITLB_INDXW       6                                       // 6 for 64 entry ITLB  7 for 128 entries
1272 
`define OR1200_ITLB_INDXL       `OR1200_IMMU_PS                         // 13                   13
1273 
`define OR1200_ITLB_INDXH       `OR1200_IMMU_PS+`OR1200_ITLB_INDXW-1    // 18                   19
1274 
`define OR1200_ITLB_INDX        `OR1200_ITLB_INDXH:`OR1200_ITLB_INDXL   // 18:13                19:13
1275 
`define OR1200_ITLB_TAGW        32-`OR1200_ITLB_INDXW-`OR1200_IMMU_PS   // 13                   12
1276 
`define OR1200_ITLB_TAGL        `OR1200_ITLB_INDXH+1                    // 19                   20
1277 
`define OR1200_ITLB_TAG         31:`OR1200_ITLB_TAGL                    // 31:19                31:20
1278 
`define OR1200_ITLBMRW          `OR1200_ITLB_TAGW+1                     // +1 because of V bit
1279 
`define OR1200_ITLBTRW          32-`OR1200_IMMU_PS+3                    // +3 because of protection bits and CI
1280 
 
1281 
//
1282 
// Cache inhibit while IMMU is not enabled/implemented
1283 
// Note: all combinations that use icpu_adr_i cause async loop
1284 
//
1285 
// cache inhibited 0GB-4GB              1'b1
1286 
// cache inhibited 0GB-2GB              !icpu_adr_i[31]
1287 
// cache inhibited 0GB-1GB 2GB-3GB      !icpu_adr_i[30]
1288 
// cache inhibited 1GB-2GB 3GB-4GB      icpu_adr_i[30]
1289 
// cache inhibited 2GB-4GB (default)    icpu_adr_i[31]
1290 
// cached 0GB-4GB                       1'b0
1291 
//
1292 
`define OR1200_IMMU_CI                  1'b0
1293 
 
1294 
 
1295 
/////////////////////////////////////////////////
1296 
//
1297 
// Insn cache (IC)
1298 
//
1299 
 
1300 
// 3 for 8 bytes, 4 for 16 bytes etc
1301 
`define OR1200_ICLS             4
1302 
 
1303 
//
1304 
// IC configurations
1305 
//
1306 
`ifdef OR1200_IC_1W_512B
1307 
`define OR1200_ICSIZE   9     // 512
1308 
`define OR1200_ICINDX   `OR1200_ICSIZE-2 // 7
1309 
`define OR1200_ICINDXH  `OR1200_ICSIZE-1 // 8
1310 
`define OR1200_ICTAGL   `OR1200_ICINDXH+1 // 9
1311 
`define OR1200_ICTAG    `OR1200_ICSIZE-`OR1200_ICLS // 5
1312 
`define OR1200_ICTAG_W  24
1313 
`endif
1314 
`ifdef OR1200_IC_1W_4KB
1315 
`define OR1200_ICSIZE                   12                      // 4096
1316 
`define OR1200_ICINDX                   `OR1200_ICSIZE-2        // 10
1317 
`define OR1200_ICINDXH                  `OR1200_ICSIZE-1        // 11
1318 
`define OR1200_ICTAGL                   `OR1200_ICINDXH+1       // 12
1319 
`define OR1200_ICTAG                    `OR1200_ICSIZE-`OR1200_ICLS     // 8
1320 
`define OR1200_ICTAG_W                  21
1321 
`endif
1322 
`ifdef OR1200_IC_1W_8KB
1323 
`define OR1200_ICSIZE                   13                      // 8192
1324 
`define OR1200_ICINDX                   `OR1200_ICSIZE-2        // 11
1325 
`define OR1200_ICINDXH                  `OR1200_ICSIZE-1        // 12
1326 
`define OR1200_ICTAGL                   `OR1200_ICINDXH+1       // 13
1327 
`define OR1200_ICTAG                    `OR1200_ICSIZE-`OR1200_ICLS     // 9
1328 
`define OR1200_ICTAG_W                  20
1329 
`endif
1330 
 
1331 
 
1332 
/////////////////////////////////////////////////
1333 
//
1334 
// Data cache (DC)
1335 
//
1336 
 
1337 
// 3 for 8 bytes, 4 for 16 bytes etc
1338 
`define OR1200_DCLS             4
1339 
 
1340 
// Define to perform store refill (potential performance penalty)
1341 
// `define OR1200_DC_STORE_REFILL
1342 
 
1343 
//
1344 
// DC configurations
1345 
//
1346 
`ifdef OR1200_DC_1W_4KB
1347 
`define OR1200_DCSIZE                   12                      // 4096
1348 
`define OR1200_DCINDX                   `OR1200_DCSIZE-2        // 10
1349 
`define OR1200_DCINDXH                  `OR1200_DCSIZE-1        // 11
1350 
`define OR1200_DCTAGL                   `OR1200_DCINDXH+1       // 12
1351 
`define OR1200_DCTAG                    `OR1200_DCSIZE-`OR1200_DCLS     // 8
1352 
`define OR1200_DCTAG_W                  21
1353 
`endif
1354 
`ifdef OR1200_DC_1W_8KB
1355 
`define OR1200_DCSIZE                   13                      // 8192
1356 
`define OR1200_DCINDX                   `OR1200_DCSIZE-2        // 11
1357 
`define OR1200_DCINDXH                  `OR1200_DCSIZE-1        // 12
1358 
`define OR1200_DCTAGL                   `OR1200_DCINDXH+1       // 13
1359 
`define OR1200_DCTAG                    `OR1200_DCSIZE-`OR1200_DCLS     // 9
1360 
`define OR1200_DCTAG_W                  20
1361 
`endif
1362 
 
1363 
/////////////////////////////////////////////////
1364 
//
1365 
// Store buffer (SB)
1366 
//
1367 
 
1368 
//
1369 
// Store buffer
1370 
//
1371 
// It will improve performance by "caching" CPU stores
1372 
// using store buffer. This is most important for function
1373 
// prologues because DC can only work in write though mode
1374 
// and all stores would have to complete external WB writes
1375 
// to memory.
1376 
// Store buffer is between DC and data BIU.
1377 
// All stores will be stored into store buffer and immediately
1378 
// completed by the CPU, even though actual external writes
1379 
// will be performed later. As a consequence store buffer masks
1380 
// all data bus errors related to stores (data bus errors
1381 
// related to loads are delivered normally).
1382 
// All pending CPU loads will wait until store buffer is empty to
1383 
// ensure strict memory model. Right now this is necessary because
1384 
// we don't make destinction between cached and cache inhibited
1385 
// address space, so we simply empty store buffer until loads
1386 
// can begin.
1387 
//
1388 
// It makes design a bit bigger, depending what is the number of
1389 
// entries in SB FIFO. Number of entries can be changed further
1390 
// down.
1391 
//
1392 
//`define OR1200_SB_IMPLEMENTED
1393 
 
1394 
//
1395 
// Number of store buffer entries
1396 
//
1397 
// Verified number of entries are 4 and 8 entries
1398 
// (2 and 3 for OR1200_SB_LOG). OR1200_SB_ENTRIES must
1399 
// always match 2**OR1200_SB_LOG.
1400 
// To disable store buffer, undefine
1401 
// OR1200_SB_IMPLEMENTED.
1402 
//
1403 
`define OR1200_SB_LOG           2       // 2 or 3
1404 
`define OR1200_SB_ENTRIES       4       // 4 or 8
1405 
 
1406 
 
1407 
/////////////////////////////////////////////////
1408 
//
1409 
// Quick Embedded Memory (QMEM)
1410 
//
1411 
 
1412 
//
1413 
// Quick Embedded Memory
1414 
//
1415 
// Instantiation of dedicated insn/data memory (RAM or ROM).
1416 
// Insn fetch has effective throughput 1insn / clock cycle.
1417 
// Data load takes two clock cycles / access, data store
1418 
// takes 1 clock cycle / access (if there is no insn fetch)).
1419 
// Memory instantiation is shared between insn and data,
1420 
// meaning if insn fetch are performed, data load/store
1421 
// performance will be lower.
1422 
//
1423 
// Main reason for QMEM is to put some time critical functions
1424 
// into this memory and to have predictable and fast access
1425 
// to these functions. (soft fpu, context switch, exception
1426 
// handlers, stack, etc)
1427 
//
1428 
// It makes design a bit bigger and slower. QMEM sits behind
1429 
// IMMU/DMMU so all addresses are physical (so the MMUs can be
1430 
// used with QMEM and QMEM is seen by the CPU just like any other
1431 
// memory in the system). IC/DC are sitting behind QMEM so the
1432 
// whole design timing might be worse with QMEM implemented.
1433 
//
1434 
//`define OR1200_QMEM_IMPLEMENTED
1435 
 
1436 
//
1437 
// Base address and mask of QMEM
1438 
//
1439 
// Base address defines first address of QMEM. Mask defines
1440 
// QMEM range in address space. Actual size of QMEM is however
1441 
// determined with instantiated RAM/ROM. However bigger
1442 
// mask will reserve more address space for QMEM, but also
1443 
// make design faster, while more tight mask will take
1444 
// less address space but also make design slower. If
1445 
// instantiated RAM/ROM is smaller than space reserved with
1446 
// the mask, instatiated RAM/ROM will also be shadowed
1447 
// at higher addresses in reserved space.
1448 
//
1449 
`define OR1200_QMEM_IADDR       32'h0080_0000
1450 
`define OR1200_QMEM_IMASK       32'hfff0_0000   // Max QMEM size 1MB
1451 
`define OR1200_QMEM_DADDR  32'h0080_0000
1452 
`define OR1200_QMEM_DMASK  32'hfff0_0000 // Max QMEM size 1MB
1453 
 
1454 
//
1455 
// QMEM interface byte-select capability
1456 
//
1457 
// To enable qmem_sel* ports, define this macro.
1458 
//
1459 
//`define OR1200_QMEM_BSEL
1460 
 
1461 
//
1462 
// QMEM interface acknowledge
1463 
//
1464 
// To enable qmem_ack port, define this macro.
1465 
//
1466 
//`define OR1200_QMEM_ACK
1467 
 
1468 
/////////////////////////////////////////////////////
1469 
//
1470 
// VR, UPR and Configuration Registers
1471 
//
1472 
//
1473 
// VR, UPR and configuration registers are optional. If
1474 
// implemented, operating system can automatically figure
1475 
// out how to use the processor because it knows
1476 
// what units are available in the processor and how they
1477 
// are configured.
1478 
//
1479 
// This section must be last in or1200_defines.v file so
1480 
// that all units are already configured and thus
1481 
// configuration registers are properly set.
1482 
//
1483 
 
1484 
// Define if you want configuration registers implemented
1485 
//`define OR1200_CFGR_IMPLEMENTED
1486 
 
1487 
// Define if you want full address decode inside SYS group
1488 
`define OR1200_SYS_FULL_DECODE
1489 
 
1490 
// Offsets of VR, UPR and CFGR registers
1491 
`define OR1200_SPRGRP_SYS_VR            4'h0
1492 
`define OR1200_SPRGRP_SYS_UPR           4'h1
1493 
`define OR1200_SPRGRP_SYS_CPUCFGR       4'h2
1494 
`define OR1200_SPRGRP_SYS_DMMUCFGR      4'h3
1495 
`define OR1200_SPRGRP_SYS_IMMUCFGR      4'h4
1496 
`define OR1200_SPRGRP_SYS_DCCFGR        4'h5
1497 
`define OR1200_SPRGRP_SYS_ICCFGR        4'h6
1498 
`define OR1200_SPRGRP_SYS_DCFGR 4'h7
1499 
 
1500 
// VR fields
1501 
`define OR1200_VR_REV_BITS              5:0
1502 
`define OR1200_VR_RES1_BITS             15:6
1503 
`define OR1200_VR_CFG_BITS              23:16
1504 
`define OR1200_VR_VER_BITS              31:24
1505 
 
1506 
// VR values
1507 
`define OR1200_VR_REV                   6'h01
1508 
`define OR1200_VR_RES1                  10'h000
1509 
`define OR1200_VR_CFG                   8'h00
1510 
`define OR1200_VR_VER                   8'h12
1511 
 
1512 
// UPR fields
1513 
`define OR1200_UPR_UP_BITS              0
1514 
`define OR1200_UPR_DCP_BITS             1
1515 
`define OR1200_UPR_ICP_BITS             2
1516 
`define OR1200_UPR_DMP_BITS             3
1517 
`define OR1200_UPR_IMP_BITS             4
1518 
`define OR1200_UPR_MP_BITS              5
1519 
`define OR1200_UPR_DUP_BITS             6
1520 
`define OR1200_UPR_PCUP_BITS            7
1521 
`define OR1200_UPR_PMP_BITS             8
1522 
`define OR1200_UPR_PICP_BITS            9
1523 
`define OR1200_UPR_TTP_BITS             10
1524 
`define OR1200_UPR_RES1_BITS            23:11
1525 
`define OR1200_UPR_CUP_BITS             31:24
1526 
 
1527 
// UPR values
1528 
`define OR1200_UPR_UP                   1'b1
1529 
`ifdef OR1200_NO_DC
1530 
`define OR1200_UPR_DCP                  1'b0
1531 
`else
1532 
`define OR1200_UPR_DCP                  1'b1
1533 
`endif
1534 
`ifdef OR1200_NO_IC
1535 
`define OR1200_UPR_ICP                  1'b0
1536 
`else
1537 
`define OR1200_UPR_ICP                  1'b1
1538 
`endif
1539 
`ifdef OR1200_NO_DMMU
1540 
`define OR1200_UPR_DMP                  1'b0
1541 
`else
1542 
`define OR1200_UPR_DMP                  1'b1
1543 
`endif
1544 
`ifdef OR1200_NO_IMMU
1545 
`define OR1200_UPR_IMP                  1'b0
1546 
`else
1547 
`define OR1200_UPR_IMP                  1'b1
1548 
`endif
1549 
`define OR1200_UPR_MP                   1'b1    // MAC always present
1550 
`ifdef OR1200_DU_IMPLEMENTED
1551 
`define OR1200_UPR_DUP                  1'b1
1552 
`else
1553 
`define OR1200_UPR_DUP                  1'b0
1554 
`endif
1555 
`define OR1200_UPR_PCUP                 1'b0    // Performance counters not present
1556 
`ifdef OR1200_DU_IMPLEMENTED
1557 
`define OR1200_UPR_PMP                  1'b1
1558 
`else
1559 
`define OR1200_UPR_PMP                  1'b0
1560 
`endif
1561 
`ifdef OR1200_DU_IMPLEMENTED
1562 
`define OR1200_UPR_PICP                 1'b1
1563 
`else
1564 
`define OR1200_UPR_PICP                 1'b0
1565 
`endif
1566 
`ifdef OR1200_DU_IMPLEMENTED
1567 
`define OR1200_UPR_TTP                  1'b1
1568 
`else
1569 
`define OR1200_UPR_TTP                  1'b0
1570 
`endif
1571 
`define OR1200_UPR_RES1                 13'h0000
1572 
`define OR1200_UPR_CUP                  8'h00
1573 
 
1574 
// CPUCFGR fields
1575 
`define OR1200_CPUCFGR_NSGF_BITS        3:0
1576 
`define OR1200_CPUCFGR_HGF_BITS 4
1577 
`define OR1200_CPUCFGR_OB32S_BITS       5
1578 
`define OR1200_CPUCFGR_OB64S_BITS       6
1579 
`define OR1200_CPUCFGR_OF32S_BITS       7
1580 
`define OR1200_CPUCFGR_OF64S_BITS       8
1581 
`define OR1200_CPUCFGR_OV64S_BITS       9
1582 
`define OR1200_CPUCFGR_RES1_BITS        31:10
1583 
 
1584 
// CPUCFGR values
1585 
`define OR1200_CPUCFGR_NSGF             4'h0
1586 
`define OR1200_CPUCFGR_HGF              1'b0
1587 
`define OR1200_CPUCFGR_OB32S            1'b1
1588 
`define OR1200_CPUCFGR_OB64S            1'b0
1589 
`define OR1200_CPUCFGR_OF32S            1'b0
1590 
`define OR1200_CPUCFGR_OF64S            1'b0
1591 
`define OR1200_CPUCFGR_OV64S            1'b0
1592 
`define OR1200_CPUCFGR_RES1             22'h000000
1593 
 
1594 
// DMMUCFGR fields
1595 
`define OR1200_DMMUCFGR_NTW_BITS        1:0
1596 
`define OR1200_DMMUCFGR_NTS_BITS        4:2
1597 
`define OR1200_DMMUCFGR_NAE_BITS        7:5
1598 
`define OR1200_DMMUCFGR_CRI_BITS        8
1599 
`define OR1200_DMMUCFGR_PRI_BITS        9
1600 
`define OR1200_DMMUCFGR_TEIRI_BITS      10
1601 
`define OR1200_DMMUCFGR_HTR_BITS        11
1602 
`define OR1200_DMMUCFGR_RES1_BITS       31:12
1603 
 
1604 
// DMMUCFGR values
1605 
`ifdef OR1200_NO_DMMU
1606 
`define OR1200_DMMUCFGR_NTW             2'h0    // Irrelevant
1607 
`define OR1200_DMMUCFGR_NTS             3'h0    // Irrelevant
1608 
`define OR1200_DMMUCFGR_NAE             3'h0    // Irrelevant
1609 
`define OR1200_DMMUCFGR_CRI             1'b0    // Irrelevant
1610 
`define OR1200_DMMUCFGR_PRI             1'b0    // Irrelevant
1611 
`define OR1200_DMMUCFGR_TEIRI           1'b0    // Irrelevant
1612 
`define OR1200_DMMUCFGR_HTR             1'b0    // Irrelevant
1613 
`define OR1200_DMMUCFGR_RES1            20'h00000
1614 
`else
1615 
`define OR1200_DMMUCFGR_NTW             2'h0    // 1 TLB way
1616 
`define OR1200_DMMUCFGR_NTS 3'h`OR1200_DTLB_INDXW       // Num TLB sets
1617 
`define OR1200_DMMUCFGR_NAE             3'h0    // No ATB entries
1618 
`define OR1200_DMMUCFGR_CRI             1'b0    // No control register
1619 
`define OR1200_DMMUCFGR_PRI             1'b0    // No protection reg
1620 
`define OR1200_DMMUCFGR_TEIRI           1'b1    // TLB entry inv reg impl.
1621 
`define OR1200_DMMUCFGR_HTR             1'b0    // No HW TLB reload
1622 
`define OR1200_DMMUCFGR_RES1            20'h00000
1623 
`endif
1624 
 
1625 
// IMMUCFGR fields
1626 
`define OR1200_IMMUCFGR_NTW_BITS        1:0
1627 
`define OR1200_IMMUCFGR_NTS_BITS        4:2
1628 
`define OR1200_IMMUCFGR_NAE_BITS        7:5
1629 
`define OR1200_IMMUCFGR_CRI_BITS        8
1630 
`define OR1200_IMMUCFGR_PRI_BITS        9
1631 
`define OR1200_IMMUCFGR_TEIRI_BITS      10
1632 
`define OR1200_IMMUCFGR_HTR_BITS        11
1633 
`define OR1200_IMMUCFGR_RES1_BITS       31:12
1634 
 
1635 
// IMMUCFGR values
1636 
`ifdef OR1200_NO_IMMU
1637 
`define OR1200_IMMUCFGR_NTW             2'h0    // Irrelevant
1638 
`define OR1200_IMMUCFGR_NTS             3'h0    // Irrelevant
1639 
`define OR1200_IMMUCFGR_NAE             3'h0    // Irrelevant
1640 
`define OR1200_IMMUCFGR_CRI             1'b0    // Irrelevant
1641 
`define OR1200_IMMUCFGR_PRI             1'b0    // Irrelevant
1642 
`define OR1200_IMMUCFGR_TEIRI           1'b0    // Irrelevant
1643 
`define OR1200_IMMUCFGR_HTR             1'b0    // Irrelevant
1644 
`define OR1200_IMMUCFGR_RES1            20'h00000
1645 
`else
1646 
`define OR1200_IMMUCFGR_NTW             2'h0    // 1 TLB way
1647 
`define OR1200_IMMUCFGR_NTS 3'h`OR1200_ITLB_INDXW       // Num TLB sets
1648 
`define OR1200_IMMUCFGR_NAE             3'h0    // No ATB entry
1649 
`define OR1200_IMMUCFGR_CRI             1'b0    // No control reg
1650 
`define OR1200_IMMUCFGR_PRI             1'b0    // No protection reg
1651 
`define OR1200_IMMUCFGR_TEIRI           1'b1    // TLB entry inv reg impl
1652 
`define OR1200_IMMUCFGR_HTR             1'b0    // No HW TLB reload
1653 
`define OR1200_IMMUCFGR_RES1            20'h00000
1654 
`endif
1655 
 
1656 
// DCCFGR fields
1657 
`define OR1200_DCCFGR_NCW_BITS          2:0
1658 
`define OR1200_DCCFGR_NCS_BITS          6:3
1659 
`define OR1200_DCCFGR_CBS_BITS          7
1660 
`define OR1200_DCCFGR_CWS_BITS          8
1661 
`define OR1200_DCCFGR_CCRI_BITS         9
1662 
`define OR1200_DCCFGR_CBIRI_BITS        10
1663 
`define OR1200_DCCFGR_CBPRI_BITS        11
1664 
`define OR1200_DCCFGR_CBLRI_BITS        12
1665 
`define OR1200_DCCFGR_CBFRI_BITS        13
1666 
`define OR1200_DCCFGR_CBWBRI_BITS       14
1667 
`define OR1200_DCCFGR_RES1_BITS 31:15
1668 
 
1669 
// DCCFGR values
1670 
`ifdef OR1200_NO_DC
1671 
`define OR1200_DCCFGR_NCW               3'h0    // Irrelevant
1672 
`define OR1200_DCCFGR_NCS               4'h0    // Irrelevant
1673 
`define OR1200_DCCFGR_CBS               1'b0    // Irrelevant
1674 
`define OR1200_DCCFGR_CWS               1'b0    // Irrelevant
1675 
`define OR1200_DCCFGR_CCRI              1'b1    // Irrelevant
1676 
`define OR1200_DCCFGR_CBIRI             1'b1    // Irrelevant
1677 
`define OR1200_DCCFGR_CBPRI             1'b0    // Irrelevant
1678 
`define OR1200_DCCFGR_CBLRI             1'b0    // Irrelevant
1679 
`define OR1200_DCCFGR_CBFRI             1'b1    // Irrelevant
1680 
`define OR1200_DCCFGR_CBWBRI            1'b0    // Irrelevant
1681 
`define OR1200_DCCFGR_RES1              17'h00000
1682 
`else
1683 
`define OR1200_DCCFGR_NCW               3'h0    // 1 cache way
1684 
`define OR1200_DCCFGR_NCS (`OR1200_DCTAG)       // Num cache sets
1685 
`define OR1200_DCCFGR_CBS (`OR1200_DCLS-4)      // 16 byte cache block
1686 
`define OR1200_DCCFGR_CWS               1'b0    // Write-through strategy
1687 
`define OR1200_DCCFGR_CCRI              1'b1    // Cache control reg impl.
1688 
`define OR1200_DCCFGR_CBIRI             1'b1    // Cache block inv reg impl.
1689 
`define OR1200_DCCFGR_CBPRI             1'b0    // Cache block prefetch reg not impl.
1690 
`define OR1200_DCCFGR_CBLRI             1'b0    // Cache block lock reg not impl.
1691 
`define OR1200_DCCFGR_CBFRI             1'b1    // Cache block flush reg impl.
1692 
`define OR1200_DCCFGR_CBWBRI            1'b0    // Cache block WB reg not impl.
1693 
`define OR1200_DCCFGR_RES1              17'h00000
1694 
`endif
1695 
 
1696 
// ICCFGR fields
1697 
`define OR1200_ICCFGR_NCW_BITS          2:0
1698 
`define OR1200_ICCFGR_NCS_BITS          6:3
1699 
`define OR1200_ICCFGR_CBS_BITS          7
1700 
`define OR1200_ICCFGR_CWS_BITS          8
1701 
`define OR1200_ICCFGR_CCRI_BITS         9
1702 
`define OR1200_ICCFGR_CBIRI_BITS        10
1703 
`define OR1200_ICCFGR_CBPRI_BITS        11
1704 
`define OR1200_ICCFGR_CBLRI_BITS        12
1705 
`define OR1200_ICCFGR_CBFRI_BITS        13
1706 
`define OR1200_ICCFGR_CBWBRI_BITS       14
1707 
`define OR1200_ICCFGR_RES1_BITS 31:15
1708 
 
1709 
// ICCFGR values
1710 
`ifdef OR1200_NO_IC
1711 
`define OR1200_ICCFGR_NCW               3'h0    // Irrelevant
1712 
`define OR1200_ICCFGR_NCS               4'h0    // Irrelevant
1713 
`define OR1200_ICCFGR_CBS               1'b0    // Irrelevant
1714 
`define OR1200_ICCFGR_CWS               1'b0    // Irrelevant
1715 
`define OR1200_ICCFGR_CCRI              1'b0    // Irrelevant
1716 
`define OR1200_ICCFGR_CBIRI             1'b0    // Irrelevant
1717 
`define OR1200_ICCFGR_CBPRI             1'b0    // Irrelevant
1718 
`define OR1200_ICCFGR_CBLRI             1'b0    // Irrelevant
1719 
`define OR1200_ICCFGR_CBFRI             1'b0    // Irrelevant
1720 
`define OR1200_ICCFGR_CBWBRI            1'b0    // Irrelevant
1721 
`define OR1200_ICCFGR_RES1              17'h00000
1722 
`else
1723 
`define OR1200_ICCFGR_NCW               3'h0    // 1 cache way
1724 
`define OR1200_ICCFGR_NCS (`OR1200_ICTAG)       // Num cache sets
1725 
`define OR1200_ICCFGR_CBS (`OR1200_ICLS-4)      // 16 byte cache block
1726 
`define OR1200_ICCFGR_CWS               1'b0    // Irrelevant
1727 
`define OR1200_ICCFGR_CCRI              1'b1    // Cache control reg impl.
1728 
`define OR1200_ICCFGR_CBIRI             1'b1    // Cache block inv reg impl.
1729 
`define OR1200_ICCFGR_CBPRI             1'b0    // Cache block prefetch reg not impl.
1730 
`define OR1200_ICCFGR_CBLRI             1'b0    // Cache block lock reg not impl.
1731 
`define OR1200_ICCFGR_CBFRI             1'b1    // Cache block flush reg impl.
1732 
`define OR1200_ICCFGR_CBWBRI            1'b0    // Irrelevant
1733 
`define OR1200_ICCFGR_RES1              17'h00000
1734 
`endif
1735 
 
1736 
// DCFGR fields
1737 
`define OR1200_DCFGR_NDP_BITS           2:0
1738 
`define OR1200_DCFGR_WPCI_BITS          3
1739 
`define OR1200_DCFGR_RES1_BITS          31:4
1740 
 
1741 
// DCFGR values
1742 
`ifdef OR1200_DU_HWBKPTS
1743 
`define OR1200_DCFGR_NDP        3'h`OR1200_DU_DVRDCR_PAIRS // # of DVR/DCR pairs
1744 
`ifdef OR1200_DU_DWCR0
1745 
`define OR1200_DCFGR_WPCI               1'b1
1746 
`else
1747 
`define OR1200_DCFGR_WPCI               1'b0    // WP counters not impl.
1748 
`endif
1749 
`else
1750 
`define OR1200_DCFGR_NDP                3'h0    // Zero DVR/DCR pairs
1751 
`define OR1200_DCFGR_WPCI               1'b0    // WP counters not impl.
1752 
`endif
1753 
`define OR1200_DCFGR_RES1               28'h0000000
1754 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.