OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [branches/] [verilator/] [utils/] [contributions/] [gpio/] [sw/] [gpio.c] - Blame information for rev 40

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 40 rfajardo 
#include "../support/support.h"
2 
#include "../support/board.h"
3 
 
4 
#include "../support/spr_defs.h"
5 
 
6 
#include "../drivers/uart.h"
7 
 
8 
#include "gpio.h"
9 
 
10 
void gpio_init(gpio_t *gpio, long instance_num, unsigned long base_addr)
11 
{
12 
    int i = MIN_GPIO_BIT;
13 
 
14 
    if ( gpio != NULL ) {
15 
            gpio->instance_num = instance_num;
16 
            gpio->base_addr = (unsigned char*)base_addr;
17 
            for ( ;i<=MAX_GPIO_BIT;i++)
18 
                    gpio->vectors[i].vec = NULL;
19 
            return;
20 
    } else {
21 
            // Print the error msgs here
22 
            //
23 
            uart_print_str("gpio inst in NULL.\n");
24 
            return;
25 
    }
26 
}
27 
 
28 
void gpio_config_bit(gpio_t *gpio, unsigned long bit, iotype_t io)
29 
{
30 
    if ( gpio != NULL ) {
31 
            if ( io == IO_INPUT ) {
32 
                gpio->io_config |= (1 << bit);
33 
                *(unsigned long*)(gpio->base_addr + OE_REG_OFFSET) &= (~(1 << bit));
34 
            } else {
35 
                gpio->io_config &= (~(1 << bit));
36 
                *(unsigned long*)(gpio->base_addr + OE_REG_OFFSET) |= (1 << bit);
37 
            }
38 
            return;
39 
    } else {
40 
            // Print the error msgs here
41 
            //
42 
            uart_print_str("gpio inst in NULL.\n");
43 
            return;
44 
    }
45 
}
46 
 
47 
void gpio_set_bit(gpio_t *gpio, unsigned long bit, unsigned long val)
48 
{
49 
    if ( gpio != NULL ) {
50 
            if ( val != 0 )
51 
                *(unsigned long*)(gpio->base_addr + OUT_REG_OFFSET) |= (1 << bit);
52 
            else
53 
                *(unsigned long*)(gpio->base_addr + OUT_REG_OFFSET) &= (~(1 << bit));
54 
            return;
55 
    } else {
56 
            // Print the error msgs here
57 
            //
58 
            uart_print_str("gpio inst in NULL.\n");
59 
            return;
60 
    }
61 
}
62 
 
63 
void gpio_get_bit(gpio_t *gpio, unsigned long bit, unsigned long *val)
64 
{
65 
    unsigned long temp;
66 
 
67 
    if ( gpio != NULL ) {
68 
            temp = *(unsigned long*)(gpio->base_addr + IN_REG_OFFSET);
69 
            *val = (temp & (1 << bit))? 1 : 0;
70 
            return;
71 
    } else {
72 
            // Print the error msgs here
73 
            //
74 
            uart_print_str("gpio inst in NULL.\n");
75 
            return;
76 
    }
77 
}
78 
 
79 
 
80 
void gpio_add_interrupt(gpio_t *gpio, unsigned int bit, edge_t edge,void (*func)() )
81 
{
82 
    if ( gpio != NULL ) {
83 
        if ( ( gpio->io_config &(1 << bit)) != 0 ) {  // Port bit is configured as IO_INPUT
84 
                //
85 
                // Disable the interrupts
86 
                //
87 
                *(unsigned long*)(gpio->base_addr + CTRL_REG_OFFSET) &= (~0x01);
88 
 
89 
                // Enable the interrupt bit
90 
                //
91 
                *(unsigned long*)(gpio->base_addr + INTE_REG_OFFSET) |= (1 << bit);
92 
 
93 
                // Enable the edge type
94 
                //
95 
                if ( edge == POS_EDGE )
96 
                    *(unsigned long*)(gpio->base_addr + PTRIG_REG_OFFSET) |= (1 << bit);
97 
                else
98 
                    *(unsigned long*)(gpio->base_addr + PTRIG_REG_OFFSET) &= (~(1 << bit));
99 
 
100 
                // Set the function vector
101 
                //
102 
                gpio->vectors[bit].vec = func;
103 
 
104 
                int_add( 6, gpio_interrupt, gpio );
105 
 
106 
                // Re-enable the global control bit
107 
                //
108 
                    *(unsigned long*)(gpio->base_addr + CTRL_REG_OFFSET) |= 0x01;
109 
        } else {
110 
                // Port is configured as IO_OUTPUT
111 
                uart_print_str("gpio pin is not an input pin.\n");
112 
                return;
113 
        }
114 
 
115 
    } else {
116 
            // Print the error msgs here
117 
            //
118 
            uart_print_str("gpio inst in NULL.\n");
119 
            return;
120 
    }
121 
 
122 
}
123 
 
124 
void gpio_interrupt(gpio_t *gpio)
125 
{
126 
    int i;
127 
    unsigned long int interrupt_status;
128 
 
129 
    if ( (*(unsigned long*)(gpio->base_addr + CTRL_REG_OFFSET)) & 0x02 )
130 
    {
131 
            // Interrupt is pending here
132 
            //
133 
            interrupt_status = *(unsigned long*)(gpio->base_addr + INTS_REG_OFFSET);
134 
 
135 
            // Prioritize from lower bits(0) to higher ones(31)
136 
            //
137 
 
138 
            for ( i=MIN_GPIO_BIT; i<=MAX_GPIO_BIT; i++ ) {
139 
                if ( (interrupt_status & (1<<i)) ) {
140 
                    *(unsigned long*)(gpio->base_addr + INTS_REG_OFFSET) &= (~( 1 << i ));
141 
                    (gpio->vectors[i].vec)();
142 
                }
143 
            }
144 
 
145 
            *(unsigned long*)(gpio->base_addr + CTRL_REG_OFFSET) &= (~0x02);
146 
 
147 
    }
148 
}
149 
 
150 
void hello_east()
151 
{
152 
        uart_print_str("Hello from PUSH Button EAST.\n");
153 
}
154 
 
155 
 
156 
void hello_west()
157 
{
158 
        uart_print_str("Hello from PUSH Button WEST.\n");
159 
}
160 
 
161 
 
162 
void hello_south()
163 
{
164 
        uart_print_str("Hello from PUSH Button SOUTH.\n");
165 
}
166 
 
167 
 
168 
 
169 
 
170 
#define MAX_COUNT 10
171 
 
172 
int main()
173 
{
174 
        gpio_t gpio_1;
175 
        unsigned long t0, t1, t2, t3;
176 
        unsigned long count = 0;
177 
 
178 
        tick_init();
179 
        uart_init();
180 
        int_init();
181 
        int_add(2,&uart_interrupt);
182 
 
183 
        gpio_init( &gpio_1, 1, GPIO_BASE );
184 
 
185 
        gpio_config_bit( &gpio_1, LED_0, IO_OUTPUT);
186 
        gpio_config_bit( &gpio_1, LED_1, IO_OUTPUT);
187 
        gpio_config_bit( &gpio_1, LED_2, IO_OUTPUT);
188 
        gpio_config_bit( &gpio_1, LED_3, IO_OUTPUT);
189 
        gpio_config_bit( &gpio_1, LED_4, IO_OUTPUT);
190 
        gpio_config_bit( &gpio_1, LED_5, IO_OUTPUT);
191 
        gpio_config_bit( &gpio_1, LED_6, IO_OUTPUT);
192 
        gpio_config_bit( &gpio_1, LED_7, IO_OUTPUT);
193 
 
194 
        while ( count++ < MAX_COUNT ) {
195 
                gpio_set_bit( &gpio_1, LED_7, 0 );
196 
                gpio_set_bit( &gpio_1, LED_0, 1 );
197 
                udelay();
198 
                gpio_set_bit( &gpio_1, LED_0, 0 );
199 
                gpio_set_bit( &gpio_1, LED_1, 1 );
200 
                udelay();
201 
                gpio_set_bit( &gpio_1, LED_1, 0 );
202 
                gpio_set_bit( &gpio_1, LED_2, 1 );
203 
                udelay();
204 
                gpio_set_bit( &gpio_1, LED_2, 0 );
205 
                gpio_set_bit( &gpio_1, LED_3, 1 );
206 
                udelay();
207 
                gpio_set_bit( &gpio_1, LED_3, 0 );
208 
                gpio_set_bit( &gpio_1, LED_4, 1 );
209 
                udelay();
210 
                gpio_set_bit( &gpio_1, LED_4, 0 );
211 
                gpio_set_bit( &gpio_1, LED_5, 1 );
212 
                udelay();
213 
                gpio_set_bit( &gpio_1, LED_5, 0 );
214 
                gpio_set_bit( &gpio_1, LED_6, 1 );
215 
                udelay();
216 
                gpio_set_bit( &gpio_1, LED_6, 0 );
217 
                gpio_set_bit( &gpio_1, LED_7, 1 );
218 
                udelay();
219 
        }
220 
 
221 
        gpio_set_bit( &gpio_1, LED_7, 0 );
222 
 
223 
        report(0xdeaddead);
224 
        or32_exit(0);
225 
}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.