Subversion Repositories minsoc

`include "minsoc_defines.v"

`include "or1200_defines.v"

module minsoc_top (

   clk,reset

   //JTAG ports

`ifdef GENERIC_TAP

   , jtag_tdi,jtag_tms,jtag_tck,

   jtag_tdo,jtag_vref,jtag_gnd

`endif

   //SPI ports

`ifdef START_UP

   , spi_flash_mosi, spi_flash_miso, spi_flash_sclk, spi_flash_ss

`endif

   //UART ports

`ifdef UART

   , uart_stx,uart_srx

`endif

        // Ethernet ports

`ifdef ETHERNET

        , eth_col, eth_crs, eth_trste, eth_tx_clk,

        eth_tx_en, eth_tx_er, eth_txd, eth_rx_clk,

        eth_rx_dv, eth_rx_er, eth_rxd, eth_fds_mdint,

        eth_mdc, eth_mdio

`endif

);

//

// I/O Ports

//

   input         clk;

   input         reset;

//

// SPI controller external i/f wires

//

`ifdef START_UP

output spi_flash_mosi;

input spi_flash_miso;

output spi_flash_sclk;

output [1:0] spi_flash_ss;

`endif

//

// UART

//

`ifdef UART

   output        uart_stx;

   input         uart_srx;

`endif

//

// Ethernet

//

`ifdef ETHERNET

output                  eth_tx_er;

input                   eth_tx_clk;

output                  eth_tx_en;

output  [3:0]            eth_txd;

input                   eth_rx_er;

input                   eth_rx_clk;

input                   eth_rx_dv;

input   [3:0]            eth_rxd;

input                   eth_col;

input                   eth_crs;

output                  eth_trste;

input                   eth_fds_mdint;

inout                   eth_mdio;

output                  eth_mdc;

`endif

//

// JTAG

//

`ifdef GENERIC_TAP

   input         jtag_tdi;

   input         jtag_tms;

   input         jtag_tck;

   output        jtag_tdo;

   output        jtag_vref;

   output        jtag_gnd;

assign jtag_vref = 1'b1;

assign jtag_gnd = 1'b0;

`endif

wire rstn;

`ifdef POSITIVE_RESET

assign rstn = ~reset;

`elsif NEGATIVE_RESET

assign rstn = reset;

`endif

//

// Internal wires

//

//

// Debug core master i/f wires

//

wire    [31:0]           wb_dm_adr_o;

wire    [31:0]           wb_dm_dat_i;

wire    [31:0]           wb_dm_dat_o;

wire    [3:0]            wb_dm_sel_o;

wire                    wb_dm_we_o;

wire                    wb_dm_stb_o;

wire                    wb_dm_cyc_o;

wire                    wb_dm_ack_i;

wire                    wb_dm_err_i;

//

// Debug <-> RISC wires

//

wire    [3:0]            dbg_lss;

wire    [1:0]            dbg_is;

wire    [10:0]           dbg_wp;

wire                    dbg_bp;

wire    [31:0]           dbg_dat_dbg;

wire    [31:0]           dbg_dat_risc;

wire    [31:0]           dbg_adr;

wire                    dbg_ewt;

wire                    dbg_stall;

wire            dbg_we;

wire            dbg_stb;

wire            dbg_ack;

//

// RISC instruction master i/f wires

//

wire    [31:0]           wb_rim_adr_o;

wire                    wb_rim_cyc_o;

wire    [31:0]           wb_rim_dat_i;

wire    [31:0]           wb_rim_dat_o;

wire    [3:0]            wb_rim_sel_o;

wire                    wb_rim_ack_i;

wire                    wb_rim_err_i;

wire                    wb_rim_rty_i = 1'b0;

wire                    wb_rim_we_o;

wire                    wb_rim_stb_o;

wire    [31:0]           wb_rif_dat_i;

wire                    wb_rif_ack_i;

//

// RISC data master i/f wires

//

wire    [31:0]           wb_rdm_adr_o;

wire                    wb_rdm_cyc_o;

wire    [31:0]           wb_rdm_dat_i;

wire    [31:0]           wb_rdm_dat_o;

wire    [3:0]            wb_rdm_sel_o;

wire                    wb_rdm_ack_i;

wire                    wb_rdm_err_i;

wire                    wb_rdm_rty_i = 1'b0;

wire                    wb_rdm_we_o;

wire                    wb_rdm_stb_o;

//

// RISC misc

//

wire    [`OR1200_PIC_INTS-1:0]           pic_ints;

//

// Flash controller slave i/f wires

//

wire    [31:0]           wb_fs_dat_i;

wire    [31:0]           wb_fs_dat_o;

wire    [31:0]           wb_fs_adr_i;

wire    [3:0]            wb_fs_sel_i;

wire                    wb_fs_we_i;

wire                    wb_fs_cyc_i;

wire                    wb_fs_stb_i;

wire                    wb_fs_ack_o;

wire                    wb_fs_err_o;

//

// SPI controller slave i/f wires

//

wire    [31:0]           wb_sp_dat_i;

wire    [31:0]           wb_sp_dat_o;

wire    [31:0]           wb_sp_adr_i;

wire    [3:0]            wb_sp_sel_i;

wire                    wb_sp_we_i;

wire                    wb_sp_cyc_i;

wire                    wb_sp_stb_i;

wire                    wb_sp_ack_o;

wire                    wb_sp_err_o;

//

// SPI controller external i/f wires

//

wire spi_flash_mosi;

wire spi_flash_miso;

wire spi_flash_sclk;

wire [1:0] spi_flash_ss;

//

// SRAM controller slave i/f wires

//

wire    [31:0]           wb_ss_dat_i;

wire    [31:0]           wb_ss_dat_o;

wire    [31:0]           wb_ss_adr_i;

wire    [3:0]            wb_ss_sel_i;

wire                    wb_ss_we_i;

wire                    wb_ss_cyc_i;

wire                    wb_ss_stb_i;

wire                    wb_ss_ack_o;

wire                    wb_ss_err_o;

//

// Ethernet core master i/f wires

//

wire    [31:0]           wb_em_adr_o;

wire    [31:0]           wb_em_dat_i;

wire    [31:0]           wb_em_dat_o;

wire    [3:0]            wb_em_sel_o;

wire                    wb_em_we_o;

wire                    wb_em_stb_o;

wire                    wb_em_cyc_o;

wire                    wb_em_ack_i;

wire                    wb_em_err_i;

//

// Ethernet core slave i/f wires

//

wire    [31:0]           wb_es_dat_i;

wire    [31:0]           wb_es_dat_o;

wire    [31:0]           wb_es_adr_i;

wire    [3:0]            wb_es_sel_i;

wire                    wb_es_we_i;

wire                    wb_es_cyc_i;

wire                    wb_es_stb_i;

wire                    wb_es_ack_o;

wire                    wb_es_err_o;

//

// Ethernet external i/f wires

//

wire                    eth_mdo;

wire                    eth_mdoe;

//

// UART16550 core slave i/f wires

//

wire    [31:0]           wb_us_dat_i;

wire    [31:0]           wb_us_dat_o;

wire    [31:0]           wb_us_adr_i;

wire    [3:0]            wb_us_sel_i;

wire                    wb_us_we_i;

wire                    wb_us_cyc_i;

wire                    wb_us_stb_i;

wire                    wb_us_ack_o;

wire                    wb_us_err_o;

//

// UART external i/f wires

//

wire                    uart_stx;

wire                    uart_srx;

//

// Reset debounce

//

reg                     rst_r;

reg                     wb_rst;

//

// Global clock

//

wire                    wb_clk;

//

// Reset debounce

//

always @(posedge wb_clk or negedge rstn)

        if (~rstn)

                rst_r <= 1'b1;

        else

                rst_r <= #1 1'b0;

//

// Reset debounce

//

always @(posedge wb_clk)

        wb_rst <= #1 rst_r;

//

// Clock Divider

//

minsoc_clock_manager #

(

   .divisor(`CLOCK_DIVISOR)

)

clk_adjust (

        .clk_i(clk),

        .clk_o(wb_clk)

);

//

// Unused WISHBONE signals

//

assign wb_us_err_o = 1'b0;

assign wb_fs_err_o = 1'b0;

assign wb_sp_err_o = 1'b0;

//

// Unused interrupts

//

assign pic_ints[`APP_INT_RES1] = 'b0;

assign pic_ints[`APP_INT_RES2] = 'b0;

assign pic_ints[`APP_INT_RES3] = 'b0;

assign pic_ints[`APP_INT_PS2] = 'b0;

//

// Ethernet tri-state

//

`ifdef ETHERNET

assign eth_mdio = eth_mdoe ? eth_mdo : 1'bz;

assign eth_trste = `ETH_RESET;

`endif

//

// RISC Instruction address for Flash

//

// Until first access to real Flash area,

// CPU instruction is fixed to jump to the Flash area.

// After Flash area is accessed, CPU instructions 

// come from the tc_top (wishbone "switch").

//

`ifdef START_UP

reg jump_flash;

reg [3:0] rif_counter;

reg [31:0] rif_dat_int;

reg rif_ack_int;

always @(posedge wb_clk or negedge rstn)

begin

        if (!rstn) begin

                jump_flash <= #1 1'b1;

                rif_counter <= 4'h0;

                rif_ack_int <= 1'b0;

        end

        else begin

                rif_ack_int <= 1'b0;

                if (wb_rim_cyc_o && (wb_rim_adr_o[31:32-`APP_ADDR_DEC_W] == `APP_ADDR_FLASH))

                        jump_flash <= #1 1'b0;

                if ( jump_flash == 1'b1 ) begin

                        if ( wb_rim_cyc_o && wb_rim_stb_o && ~wb_rim_we_o )

                                rif_ack_int <= 1'b1;

            if ( rif_ack_int == 1'b1 ) begin

                                rif_counter <= rif_counter + 1'b1;

                                rif_ack_int <= 1'b0;

            end

                end

        end

end

always @ (rif_counter)

begin

        case ( rif_counter )

                4'h0: rif_dat_int = { `OR1200_OR32_MOVHI , 5'h01 , 4'h0 , 1'b0 , `APP_ADDR_FLASH , 8'h00 };

                4'h1: rif_dat_int = { `OR1200_OR32_ORI , 5'h01 , 5'h01 , 16'h0000 };

                4'h2: rif_dat_int = { `OR1200_OR32_JR , 10'h000 , 5'h01 , 11'h000 };

                4'h3: rif_dat_int = { `OR1200_OR32_NOP , 10'h000 , 16'h0000 };

                default: rif_dat_int = 32'h0000_0000;

        endcase

end

assign wb_rif_dat_i = jump_flash ? rif_dat_int : wb_rim_dat_i;

assign wb_rif_ack_i = jump_flash ? rif_ack_int : wb_rim_ack_i;

`else

assign wb_rif_dat_i = wb_rim_dat_i;

assign wb_rif_ack_i = wb_rim_ack_i;

`endif

//

// TAP<->dbg_interface

//      

wire jtag_tck;

wire debug_tdi;

wire debug_tdo;

wire capture_dr;

wire shift_dr;

wire pause_dr;

wire update_dr;

wire debug_select;

wire test_logic_reset;

//

// Instantiation of the development i/f

//

adbg_top dbg_top  (

        // JTAG pins

      .tck_i    ( jtag_tck ),

      .tdi_i    ( debug_tdi ),

      .tdo_o    ( debug_tdo ),

      .rst_i    ( test_logic_reset ),           //cable without rst

        // Boundary Scan signals

      .capture_dr_i ( capture_dr ),

      .shift_dr_i  ( shift_dr ),

      .pause_dr_i  ( pause_dr ),

      .update_dr_i ( update_dr ),

      .debug_select_i( debug_select ),

        // WISHBONE common

      .wb_clk_i   ( wb_clk ),

      // WISHBONE master interface

      .wb_adr_o  ( wb_dm_adr_o ),

      .wb_dat_i  ( wb_dm_dat_i ),

      .wb_dat_o  ( wb_dm_dat_o ),

      .wb_sel_o  ( wb_dm_sel_o ),

      .wb_we_o   ( wb_dm_we_o  ),

      .wb_stb_o  ( wb_dm_stb_o ),

      .wb_cyc_o  ( wb_dm_cyc_o ),

      .wb_ack_i  ( wb_dm_ack_i ),

      .wb_err_i  ( wb_dm_err_i ),

      .wb_cti_o  ( ),

      .wb_bte_o  ( ),

      // RISC signals

      .cpu0_clk_i  ( wb_clk ),

      .cpu0_addr_o ( dbg_adr ),

      .cpu0_data_i ( dbg_dat_risc ),

      .cpu0_data_o ( dbg_dat_dbg ),

      .cpu0_bp_i   ( dbg_bp ),

      .cpu0_stall_o( dbg_stall ),

      .cpu0_stb_o  ( dbg_stb ),

      .cpu0_we_o   ( dbg_we ),

      .cpu0_ack_i  ( dbg_ack ),

      .cpu0_rst_o  ( )

);

//

// JTAG TAP controller instantiation

//

`ifdef GENERIC_TAP

tap_top tap_top(

         // JTAG pads

         .tms_pad_i(jtag_tms),

         .tck_pad_i(jtag_tck),

         .trstn_pad_i(rstn),

         .tdi_pad_i(jtag_tdi),

         .tdo_pad_o(jtag_tdo),

         .tdo_padoe_o( ),

         // TAP states

         .test_logic_reset_o( test_logic_reset ),

         .run_test_idle_o(),

         .shift_dr_o(shift_dr),

         .pause_dr_o(pause_dr),

         .update_dr_o(update_dr),

         .capture_dr_o(capture_dr),

         // Select signals for boundary scan or mbist

         .extest_select_o(),

         .sample_preload_select_o(),

         .mbist_select_o(),

         .debug_select_o(debug_select),

         // TDO signal that is connected to TDI of sub-modules.

         .tdi_o(debug_tdi),

         // TDI signals from sub-modules

         .debug_tdo_i(debug_tdo),    // from debug module

         .bs_chain_tdo_i(1'b0), // from Boundary Scan Chain

         .mbist_tdo_i(1'b0)     // from Mbist Chain

);

`elsif FPGA_TAP

`ifdef ALTERA_FPGA

altera_virtual_jtag tap_top(

        .tck_o(jtag_tck),

        .debug_tdo_i(debug_tdo),

        .tdi_o(debug_tdi),

        .test_logic_reset_o(test_logic_reset),

        .run_test_idle_o(),

        .shift_dr_o(shift_dr),

        .capture_dr_o(capture_dr),

        .pause_dr_o(pause_dr),

        .update_dr_o(update_dr),

        .debug_select_o(debug_select)

);

`elsif XILINX_FPGA

minsoc_xilinx_internal_jtag tap_top(

        .tck_o( jtag_tck ),

        .debug_tdo_i( debug_tdo ),

        .tdi_o( debug_tdi ),

        .test_logic_reset_o( test_logic_reset ),

        .run_test_idle_o( ),

        .shift_dr_o( shift_dr ),

        .capture_dr_o( capture_dr ),

        .pause_dr_o( pause_dr ),

        .update_dr_o( update_dr ),

        .debug_select_o( debug_select )

);

`endif // !FPGA_TAP

`endif // !GENERIC_TAP

//

// Instantiation of the OR1200 RISC

//

or1200_top or1200_top (

        // Common

        .rst_i          ( wb_rst ),

        .clk_i          ( wb_clk ),

`ifdef OR1200_CLMODE_1TO2

        .clmode_i       ( 2'b01 ),

`else

`ifdef OR1200_CLMODE_1TO4

        .clmode_i       ( 2'b11 ),

`else

        .clmode_i       ( 2'b00 ),

`endif

`endif

        // WISHBONE Instruction Master

        .iwb_clk_i      ( wb_clk ),

        .iwb_rst_i      ( wb_rst ),

        .iwb_cyc_o      ( wb_rim_cyc_o ),

        .iwb_adr_o      ( wb_rim_adr_o ),

        .iwb_dat_i      ( wb_rif_dat_i ),

        .iwb_dat_o      ( wb_rim_dat_o ),

        .iwb_sel_o      ( wb_rim_sel_o ),

        .iwb_ack_i      ( wb_rif_ack_i ),

        .iwb_err_i      ( wb_rim_err_i ),

        .iwb_rty_i      ( wb_rim_rty_i ),

        .iwb_we_o       ( wb_rim_we_o  ),

        .iwb_stb_o      ( wb_rim_stb_o ),

        // WISHBONE Data Master

        .dwb_clk_i      ( wb_clk ),

        .dwb_rst_i      ( wb_rst ),

        .dwb_cyc_o      ( wb_rdm_cyc_o ),

        .dwb_adr_o      ( wb_rdm_adr_o ),

        .dwb_dat_i      ( wb_rdm_dat_i ),

        .dwb_dat_o      ( wb_rdm_dat_o ),

        .dwb_sel_o      ( wb_rdm_sel_o ),

        .dwb_ack_i      ( wb_rdm_ack_i ),

        .dwb_err_i      ( wb_rdm_err_i ),

        .dwb_rty_i      ( wb_rdm_rty_i ),

        .dwb_we_o       ( wb_rdm_we_o  ),

        .dwb_stb_o      ( wb_rdm_stb_o ),

        // Debug

        .dbg_stall_i    ( dbg_stall ),

        .dbg_dat_i      ( dbg_dat_dbg ),

        .dbg_adr_i      ( dbg_adr ),

        .dbg_ewt_i      ( 1'b0 ),

        .dbg_lss_o      ( dbg_lss ),

        .dbg_is_o       ( dbg_is ),

        .dbg_wp_o       ( dbg_wp ),

        .dbg_bp_o       ( dbg_bp ),

        .dbg_dat_o      ( dbg_dat_risc ),

        .dbg_ack_o      ( dbg_ack ),

        .dbg_stb_i      ( dbg_stb ),

        .dbg_we_i       ( dbg_we ),

        // Power Management

        .pm_clksd_o     ( ),

        .pm_cpustall_i  ( 1'b0 ),

        .pm_dc_gate_o   ( ),

        .pm_ic_gate_o   ( ),

        .pm_dmmu_gate_o ( ),

        .pm_immu_gate_o ( ),

        .pm_tt_gate_o   ( ),

        .pm_cpu_gate_o  ( ),

        .pm_wakeup_o    ( ),

        .pm_lvolt_o     ( ),

        // Interrupts

        .pic_ints_i     ( pic_ints )

);

//

// Startup OR1k

//

`ifdef START_UP

OR1K_startup OR1K_startup0

(

    .wb_adr_i(wb_fs_adr_i[6:2]),

    .wb_stb_i(wb_fs_stb_i),

    .wb_cyc_i(wb_fs_cyc_i),

    .wb_dat_o(wb_fs_dat_o),

    .wb_ack_o(wb_fs_ack_o),

    .wb_clk(wb_clk),

    .wb_rst(wb_rst)

);

spi_flash_top #

(

   .divider(0),

   .divider_len(2)

)

spi_flash_top0

(

   .wb_clk_i(wb_clk),

   .wb_rst_i(wb_rst),

   .wb_adr_i(wb_sp_adr_i[4:2]),

   .wb_dat_i(wb_sp_dat_i),

   .wb_dat_o(wb_sp_dat_o),

   .wb_sel_i(wb_sp_sel_i),

   .wb_we_i(wb_sp_we_i),

   .wb_stb_i(wb_sp_stb_i),

   .wb_cyc_i(wb_sp_cyc_i),

   .wb_ack_o(wb_sp_ack_o),

   .mosi_pad_o(spi_flash_mosi),

   .miso_pad_i(spi_flash_miso),

   .sclk_pad_o(spi_flash_sclk),

   .ss_pad_o(spi_flash_ss)

);

`else

assign wb_fs_dat_o = 32'h0000_0000;

assign wb_fs_ack_o = 1'b0;

assign wb_sp_dat_o = 32'h0000_0000;

assign wb_sp_ack_o = 1'b0;

`endif

//

// Instantiation of the SRAM controller

//

minsoc_onchip_ram_top #

(

    .adr_width(`MEMORY_ADR_WIDTH)     //16 blocks of 2048 bytes memory 32768

)

onchip_ram_top (

        // WISHBONE common

        .wb_clk_i       ( wb_clk ),

        .wb_rst_i       ( wb_rst ),

        // WISHBONE slave

        .wb_dat_i       ( wb_ss_dat_i ),

        .wb_dat_o       ( wb_ss_dat_o ),

        .wb_adr_i       ( wb_ss_adr_i ),

        .wb_sel_i       ( wb_ss_sel_i ),

        .wb_we_i        ( wb_ss_we_i  ),

        .wb_cyc_i       ( wb_ss_cyc_i ),

        .wb_stb_i       ( wb_ss_stb_i ),

        .wb_ack_o       ( wb_ss_ack_o ),

        .wb_err_o       ( wb_ss_err_o )

);

//

// Instantiation of the UART16550

//

`ifdef UART

uart_top uart_top (

        // WISHBONE common

        .wb_clk_i       ( wb_clk ),

        .wb_rst_i       ( wb_rst ),

        // WISHBONE slave

        .wb_adr_i       ( wb_us_adr_i[4:0] ),

        .wb_dat_i       ( wb_us_dat_i ),

        .wb_dat_o       ( wb_us_dat_o ),

        .wb_we_i        ( wb_us_we_i  ),

        .wb_stb_i       ( wb_us_stb_i ),

        .wb_cyc_i       ( wb_us_cyc_i ),

        .wb_ack_o       ( wb_us_ack_o ),

        .wb_sel_i       ( wb_us_sel_i ),

        // Interrupt request

        .int_o          ( pic_ints[`APP_INT_UART] ),

        // UART signals

        // serial input/output

        .stx_pad_o      ( uart_stx ),

        .srx_pad_i      ( uart_srx ),

        // modem signals

        .rts_pad_o      ( ),

        .cts_pad_i      ( 1'b0 ),

        .dtr_pad_o      ( ),