OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [trunk/] [utils/] [contributions/] [gpio/] [rtl/] [gpio_top.v] - Blame information for rev 94

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 40 rfajardo 
//////////////////////////////////////////////////////////////////////
2 
////                                                              ////
3 
////  WISHBONE General-Purpose I/O                                ////
4 
////                                                              ////
5 
////  This file is part of the GPIO project                       ////
6 
////  http://www.opencores.org/cores/gpio/                        ////
7 
////                                                              ////
8 
////  Description                                                 ////
9 
////  Implementation of GPIO IP core according to                 ////
10 
////  GPIO IP core specification document.                        ////
11 
////                                                              ////
12 
////  To Do:                                                      ////
13 
////   Nothing                                                    ////
14 
////                                                              ////
15 
////  Author(s):                                                  ////
16 
////      - Damjan Lampret, lampret@opencores.org                 ////
17 
////                                                              ////
18 
//////////////////////////////////////////////////////////////////////
19 
////                                                              ////
20 
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
21 
////                                                              ////
22 
//// This source file may be used and distributed without         ////
23 
//// restriction provided that this copyright statement is not    ////
24 
//// removed from the file and that any derivative work contains  ////
25 
//// the original copyright notice and the associated disclaimer. ////
26 
////                                                              ////
27 
//// This source file is free software; you can redistribute it   ////
28 
//// and/or modify it under the terms of the GNU Lesser General   ////
29 
//// Public License as published by the Free Software Foundation; ////
30 
//// either version 2.1 of the License, or (at your option) any   ////
31 
//// later version.                                               ////
32 
////                                                              ////
33 
//// This source is distributed in the hope that it will be       ////
34 
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
35 
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
36 
//// PURPOSE.  See the GNU Lesser General Public License for more ////
37 
//// details.                                                     ////
38 
////                                                              ////
39 
//// You should have received a copy of the GNU Lesser General    ////
40 
//// Public License along with this source; if not, download it   ////
41 
//// from http://www.opencores.org/lgpl.shtml                     ////
42 
////                                                              ////
43 
//////////////////////////////////////////////////////////////////////
44 
//
45 
// CVS Revision History
46 
//
47 
// $Log: not supported by cvs2svn $
48 
// Revision 1.17  2004/05/05 08:21:00  andreje
49 
// Bugfixes when GPIO_RGPIO_ECLK/GPIO_RGPIO_NEC disabled, gpio oe name change and set to active-high according to spec
50 
//
51 
// Revision 1.16  2003/12/17 13:00:52  gorand
52 
// added ECLK and NEC registers, all tests passed.
53 
//
54 
// Revision 1.15  2003/11/10 23:21:22  gorand
55 
// bug fixed. all tests passed.
56 
//
57 
// Revision 1.14  2003/11/06 13:59:07  gorand
58 
// added support for 8-bit access to registers.
59 
//
60 
// Revision 1.13  2002/11/18 22:35:18  lampret
61 
// Bug fix. Interrupts were also asserted when condition was not met.
62 
//
63 
// Revision 1.12  2002/11/11 21:36:28  lampret
64 
// Added ifdef to remove mux from clk_pad_i if mux is not allowed. This also removes RGPIO_CTRL[NEC].
65 
//
66 
// Revision 1.11  2002/03/13 20:56:28  lampret
67 
// Removed zero padding as per Avi Shamli suggestion.
68 
//
69 
// Revision 1.10  2002/03/13 20:47:57  lampret
70 
// Ports changed per Ran Aviram suggestions.
71 
//
72 
// Revision 1.9  2002/03/09 03:43:27  lampret
73 
// Interrupt is asserted only when an input changes (code patch by Jacob Gorban)
74 
//
75 
// Revision 1.8  2002/01/14 19:06:28  lampret
76 
// Changed registered WISHBONE outputs wb_ack_o/wb_err_o to follow WB specification.
77 
//
78 
// Revision 1.7  2001/12/25 17:21:21  lampret
79 
// Fixed two typos.
80 
//
81 
// Revision 1.6  2001/12/25 17:12:35  lampret
82 
// Added RGPIO_INTS.
83 
//
84 
// Revision 1.5  2001/12/12 20:35:53  lampret
85 
// Fixing style.
86 
//
87 
// Revision 1.4  2001/12/12 07:12:58  lampret
88 
// Fixed bug when wb_inta_o is registered (GPIO_WB_REGISTERED_OUTPUTS)
89 
//
90 
// Revision 1.3  2001/11/15 02:24:37  lampret
91 
// Added GPIO_REGISTERED_WB_OUTPUTS, GPIO_REGISTERED_IO_OUTPUTS and GPIO_NO_NEGEDGE_FLOPS.
92 
//
93 
// Revision 1.2  2001/10/31 02:26:51  lampret
94 
// Fixed wb_err_o.
95 
//
96 
// Revision 1.1  2001/09/18 18:49:07  lampret
97 
// Changed top level ptc into gpio_top. Changed defines.v into gpio_defines.v.
98 
//
99 
// Revision 1.1  2001/08/21 21:39:28  lampret
100 
// Changed directory structure, port names and drfines.
101 
//
102 
// Revision 1.2  2001/07/14 20:39:26  lampret
103 
// Better configurability.
104 
//
105 
// Revision 1.1  2001/06/05 07:45:26  lampret
106 
// Added initial RTL and test benches. There are still some issues with these files.
107 
//
108 
//
109 
 
110 
// synopsys translate_off
111 
`include "timescale.v"
112 
// synopsys translate_on
113 
`include "gpio_defines.v"
114 
 
115 
module gpio_top(
116 
        // WISHBONE Interface
117 
        wb_clk_i, wb_rst_i, wb_cyc_i, wb_adr_i, wb_dat_i, wb_sel_i, wb_we_i, wb_stb_i,
118 
        wb_dat_o, wb_ack_o, wb_err_o, wb_inta_o,
119 
 
120 
`ifdef GPIO_AUX_IMPLEMENT
121 
        // Auxiliary inputs interface
122 
        aux_i,
123 
`endif //  GPIO_AUX_IMPLEMENT
124 
 
125 
        // External GPIO Interface
126 
        ext_pad_i, ext_pad_o, ext_padoe_o
127 
`ifdef GPIO_CLKPAD
128 
  , clk_pad_i
129 
`endif
130 
);
131 
 
132 
parameter dw = 32;
133 
parameter aw = `GPIO_ADDRHH+1;
134 
parameter gw = `GPIO_IOS;
135 
//
136 
// WISHBONE Interface
137 
//
138 
input             wb_clk_i;     // Clock
139 
input             wb_rst_i;     // Reset
140 
input             wb_cyc_i;     // cycle valid input
141 
input   [aw-1:0] wb_adr_i;       // address bus inputs
142 
input   [dw-1:0] wb_dat_i;       // input data bus
143 
input     [3:0]     wb_sel_i;    // byte select inputs
144 
input             wb_we_i;      // indicates write transfer
145 
input             wb_stb_i;     // strobe input
146 
output  [dw-1:0]  wb_dat_o;      // output data bus
147 
output            wb_ack_o;     // normal termination
148 
output            wb_err_o;     // termination w/ error
149 
output            wb_inta_o;    // Interrupt request output
150 
 
151 
`ifdef GPIO_AUX_IMPLEMENT
152 
// Auxiliary Inputs Interface
153 
input     [gw-1:0]  aux_i;               // Auxiliary inputs
154 
`endif // GPIO_AUX_IMPLEMENT
155 
 
156 
//
157 
// External GPIO Interface
158 
//
159 
input   [gw-1:0]  ext_pad_i;     // GPIO Inputs
160 
`ifdef GPIO_CLKPAD
161 
input             clk_pad_i;    // GPIO Eclk
162 
`endif //  GPIO_CLKPAD
163 
output  [gw-1:0]  ext_pad_o;     // GPIO Outputs
164 
output  [gw-1:0]  ext_padoe_o;   // GPIO output drivers enables
165 
 
166 
`ifdef GPIO_IMPLEMENTED
167 
 
168 
//
169 
// GPIO Input Register (or no register)
170 
//
171 
`ifdef GPIO_RGPIO_IN
172 
reg     [gw-1:0] rgpio_in;       // RGPIO_IN register
173 
`else
174 
wire    [gw-1:0] rgpio_in;       // No register
175 
`endif
176 
 
177 
//
178 
// GPIO Output Register (or no register)
179 
//
180 
`ifdef GPIO_RGPIO_OUT
181 
reg     [gw-1:0] rgpio_out;      // RGPIO_OUT register
182 
`else
183 
wire    [gw-1:0] rgpio_out;      // No register
184 
`endif
185 
 
186 
//
187 
// GPIO Output Driver Enable Register (or no register)
188 
//
189 
`ifdef GPIO_RGPIO_OE
190 
reg     [gw-1:0] rgpio_oe;       // RGPIO_OE register
191 
`else
192 
wire    [gw-1:0] rgpio_oe;       // No register
193 
`endif
194 
 
195 
//
196 
// GPIO Interrupt Enable Register (or no register)
197 
//
198 
`ifdef GPIO_RGPIO_INTE
199 
reg     [gw-1:0] rgpio_inte;     // RGPIO_INTE register
200 
`else
201 
wire    [gw-1:0] rgpio_inte;     // No register
202 
`endif
203 
 
204 
//
205 
// GPIO Positive edge Triggered Register (or no register)
206 
//
207 
`ifdef GPIO_RGPIO_PTRIG
208 
reg     [gw-1:0] rgpio_ptrig;    // RGPIO_PTRIG register
209 
`else
210 
wire    [gw-1:0] rgpio_ptrig;    // No register
211 
`endif
212 
 
213 
//
214 
// GPIO Auxiliary select Register (or no register)
215 
//
216 
`ifdef GPIO_RGPIO_AUX
217 
reg     [gw-1:0] rgpio_aux;      // RGPIO_AUX register
218 
`else
219 
wire    [gw-1:0] rgpio_aux;      // No register
220 
`endif
221 
 
222 
//
223 
// GPIO Control Register (or no register)
224 
//
225 
`ifdef GPIO_RGPIO_CTRL
226 
reg     [1:0]            rgpio_ctrl;     // RGPIO_CTRL register
227 
`else
228 
wire    [1:0]            rgpio_ctrl;     // No register
229 
`endif
230 
 
231 
//
232 
// GPIO Interrupt Status Register (or no register)
233 
//
234 
`ifdef GPIO_RGPIO_INTS
235 
reg     [gw-1:0] rgpio_ints;     // RGPIO_INTS register
236 
`else
237 
wire    [gw-1:0] rgpio_ints;     // No register
238 
`endif
239 
 
240 
//
241 
// GPIO Enable Clock  Register (or no register)
242 
//
243 
`ifdef GPIO_RGPIO_ECLK
244 
reg     [gw-1:0] rgpio_eclk;     // RGPIO_ECLK register
245 
`else
246 
wire    [gw-1:0] rgpio_eclk;     // No register
247 
`endif
248 
 
249 
//
250 
// GPIO Active Negative Edge  Register (or no register)
251 
//
252 
`ifdef GPIO_RGPIO_NEC
253 
reg     [gw-1:0] rgpio_nec;      // RGPIO_NEC register
254 
`else
255 
wire    [gw-1:0] rgpio_nec;      // No register
256 
`endif
257 
 
258 
 
259 
//
260 
// Synchronization flops for input signals
261 
//
262 
`ifdef GPIO_SYNC_IN_WB
263 
reg  [gw-1:0]  sync      ,
264 
               ext_pad_s ;
265 
`else
266 
wire [gw-1:0]  ext_pad_s ;
267 
`endif
268 
 
269 
 
270 
 
271 
//
272 
// Internal wires & regs
273 
//
274 
wire            rgpio_out_sel;  // RGPIO_OUT select
275 
wire            rgpio_oe_sel; // RGPIO_OE select
276 
wire            rgpio_inte_sel; // RGPIO_INTE select
277 
wire            rgpio_ptrig_sel;// RGPIO_PTRIG select
278 
wire            rgpio_aux_sel;  // RGPIO_AUX select
279 
wire            rgpio_ctrl_sel; // RGPIO_CTRL select
280 
wire            rgpio_ints_sel; // RGPIO_INTS select
281 
wire            rgpio_eclk_sel ;
282 
wire            rgpio_nec_sel ;
283 
wire            full_decoding;  // Full address decoding qualification
284 
wire  [gw-1:0]  in_muxed; // Muxed inputs
285 
wire            wb_ack;   // WB Acknowledge
286 
wire            wb_err;   // WB Error
287 
wire            wb_inta;  // WB Interrupt
288 
reg   [dw-1:0]  wb_dat;   // WB Data out
289 
`ifdef GPIO_REGISTERED_WB_OUTPUTS
290 
reg             wb_ack_o; // WB Acknowledge
291 
reg             wb_err_o; // WB Error
292 
reg             wb_inta_o;  // WB Interrupt
293 
reg   [dw-1:0]  wb_dat_o; // WB Data out
294 
`endif
295 
wire  [gw-1:0]  out_pad;  // GPIO Outputs
296 
`ifdef GPIO_REGISTERED_IO_OUTPUTS
297 
reg   [gw-1:0]  ext_pad_o;  // GPIO Outputs
298 
`endif
299 
`ifdef GPIO_CLKPAD
300 
wire  [gw-1:0]  extc_in;  // Muxed inputs sampled by external clock
301 
wire  [gw-1:0]  pext_clk; // External clock for posedge flops
302 
reg   [gw-1:0]  pextc_sampled;  // Posedge external clock sampled inputs
303 
`ifdef GPIO_NO_NEGEDGE_FLOPS
304 
`ifdef GPIO_NO_CLKPAD_LOGIC
305 
`else
306 
reg   [gw-1:0]  nextc_sampled;  // Negedge external clock sampled inputs
307 
`endif //  GPIO_NO_CLKPAD_LOGIC
308 
`else
309 
reg   [gw-1:0]  nextc_sampled;  // Negedge external clock sampled inputs
310 
`endif
311 
`endif //  GPIO_CLKPAD
312 
 
313 
 
314 
//
315 
// All WISHBONE transfer terminations are successful except when:
316 
// a) full address decoding is enabled and address doesn't match
317 
//    any of the GPIO registers
318 
// b) wb_sel_i evaluation is enabled and one of the wb_sel_i inputs is zero
319 
//
320 
 
321 
//
322 
// WB Acknowledge
323 
//
324 
assign wb_ack = wb_cyc_i & wb_stb_i & !wb_err_o;
325 
 
326 
//
327 
// Optional registration of WB Ack
328 
//
329 
`ifdef GPIO_REGISTERED_WB_OUTPUTS
330 
always @(posedge wb_clk_i or posedge wb_rst_i)
331 
        if (wb_rst_i)
332 
                wb_ack_o <= #1 1'b0;
333 
        else
334 
                wb_ack_o <= #1 wb_ack & ~wb_ack_o & (!wb_err) ;
335 
`else
336 
assign wb_ack_o = wb_ack;
337 
`endif
338 
 
339 
//
340 
// WB Error
341 
//
342 
`ifdef GPIO_FULL_DECODE
343 
`ifdef GPIO_STRICT_32BIT_ACCESS
344 
assign wb_err = wb_cyc_i & wb_stb_i & (!full_decoding | (wb_sel_i != 4'b1111));
345 
`else
346 
assign wb_err = wb_cyc_i & wb_stb_i & !full_decoding;
347 
`endif
348 
`else
349 
`ifdef GPIO_STRICT_32BIT_ACCESS
350 
assign wb_err = wb_cyc_i & wb_stb_i & (wb_sel_i != 4'b1111);
351 
`else
352 
assign wb_err = 1'b0;
353 
`endif
354 
`endif
355 
 
356 
//
357 
// Optional registration of WB error
358 
//
359 
`ifdef GPIO_REGISTERED_WB_OUTPUTS
360 
always @(posedge wb_clk_i or posedge wb_rst_i)
361 
        if (wb_rst_i)
362 
                wb_err_o <= #1 1'b0;
363 
        else
364 
                wb_err_o <= #1 wb_err & ~wb_err_o;
365 
`else
366 
assign wb_err_o = wb_err;
367 
`endif
368 
 
369 
//
370 
// Full address decoder
371 
//
372 
`ifdef GPIO_FULL_DECODE
373 
assign full_decoding = (wb_adr_i[`GPIO_ADDRHH:`GPIO_ADDRHL] == {`GPIO_ADDRHH-`GPIO_ADDRHL+1{1'b0}}) &
374 
                        (wb_adr_i[`GPIO_ADDRLH:`GPIO_ADDRLL] == {`GPIO_ADDRLH-`GPIO_ADDRLL+1{1'b0}});
375 
`else
376 
assign full_decoding = 1'b1;
377 
`endif
378 
 
379 
//
380 
// GPIO registers address decoder
381 
//
382 
`ifdef GPIO_RGPIO_OUT
383 
assign rgpio_out_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`GPIO_OFS_BITS] == `GPIO_RGPIO_OUT) & full_decoding;
384 
`endif
385 
`ifdef GPIO_RGPIO_OE
386 
assign rgpio_oe_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`GPIO_OFS_BITS] == `GPIO_RGPIO_OE) & full_decoding;
387 
`endif
388 
`ifdef GPIO_RGPIO_INTE
389 
assign rgpio_inte_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`GPIO_OFS_BITS] == `GPIO_RGPIO_INTE) & full_decoding;
390 
`endif
391 
`ifdef GPIO_RGPIO_PTRIG
392 
assign rgpio_ptrig_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`GPIO_OFS_BITS] == `GPIO_RGPIO_PTRIG) & full_decoding;
393 
`endif
394 
`ifdef GPIO_RGPIO_AUX
395 
assign rgpio_aux_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`GPIO_OFS_BITS] == `GPIO_RGPIO_AUX) & full_decoding;
396 
`endif
397 
`ifdef GPIO_RGPIO_CTRL
398 
assign rgpio_ctrl_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`GPIO_OFS_BITS] == `GPIO_RGPIO_CTRL) & full_decoding;
399 
`endif
400 
`ifdef GPIO_RGPIO_INTS
401 
assign rgpio_ints_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`GPIO_OFS_BITS] == `GPIO_RGPIO_INTS) & full_decoding;
402 
`endif
403 
`ifdef GPIO_RGPIO_ECLK
404 
assign rgpio_eclk_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`GPIO_OFS_BITS] == `GPIO_RGPIO_ECLK) & full_decoding;
405 
`endif
406 
`ifdef GPIO_RGPIO_NEC
407 
assign rgpio_nec_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`GPIO_OFS_BITS] == `GPIO_RGPIO_NEC) & full_decoding;
408 
`endif
409 
 
410 
 
411 
//
412 
// Write to RGPIO_CTRL or update of RGPIO_CTRL[INT] bit
413 
//
414 
`ifdef GPIO_RGPIO_CTRL
415 
always @(posedge wb_clk_i or posedge wb_rst_i)
416 
        if (wb_rst_i)
417 
                rgpio_ctrl <= #1 2'b0;
418 
        else if (rgpio_ctrl_sel && wb_we_i)
419 
                rgpio_ctrl <= #1 wb_dat_i[1:0];
420 
        else if (rgpio_ctrl[`GPIO_RGPIO_CTRL_INTE])
421 
                rgpio_ctrl[`GPIO_RGPIO_CTRL_INTS] <= #1 rgpio_ctrl[`GPIO_RGPIO_CTRL_INTS] | wb_inta_o;
422 
`else
423 
assign rgpio_ctrl = 2'h01;      // RGPIO_CTRL[EN] = 1
424 
`endif
425 
 
426 
//
427 
// Write to RGPIO_OUT
428 
//
429 
`ifdef GPIO_RGPIO_OUT
430 
always @(posedge wb_clk_i or posedge wb_rst_i)
431 
        if (wb_rst_i)
432 
                rgpio_out <= #1 {gw{1'b0}};
433 
        else if (rgpio_out_sel && wb_we_i)
434 
    begin
435 
`ifdef GPIO_STRICT_32BIT_ACCESS
436 
                rgpio_out <= #1 wb_dat_i[gw-1:0];
437 
`endif
438 
 
439 
`ifdef GPIO_WB_BYTES4
440 
     if ( wb_sel_i [3] == 1'b1 )
441 
       rgpio_out [gw-1:24] <= #1 wb_dat_i [gw-1:24] ;
442 
     if ( wb_sel_i [2] == 1'b1 )
443 
       rgpio_out [23:16] <= #1 wb_dat_i [23:16] ;
444 
     if ( wb_sel_i [1] == 1'b1 )
445 
       rgpio_out [15:8] <= #1 wb_dat_i [15:8] ;
446 
     if ( wb_sel_i [0] == 1'b1 )
447 
       rgpio_out [7:0] <= #1 wb_dat_i [7:0] ;
448 
`endif
449 
`ifdef GPIO_WB_BYTES3
450 
     if ( wb_sel_i [2] == 1'b1 )
451 
       rgpio_out [gw-1:16] <= #1 wb_dat_i [gw-1:16] ;
452 
     if ( wb_sel_i [1] == 1'b1 )
453 
       rgpio_out [15:8] <= #1 wb_dat_i [15:8] ;
454 
     if ( wb_sel_i [0] == 1'b1 )
455 
       rgpio_out [7:0] <= #1 wb_dat_i [7:0] ;
456 
`endif
457 
`ifdef GPIO_WB_BYTES2
458 
     if ( wb_sel_i [1] == 1'b1 )
459 
       rgpio_out [gw-1:8] <= #1 wb_dat_i [gw-1:8] ;
460 
     if ( wb_sel_i [0] == 1'b1 )
461 
       rgpio_out [7:0] <= #1 wb_dat_i [7:0] ;
462 
`endif
463 
`ifdef GPIO_WB_BYTES1
464 
     if ( wb_sel_i [0] == 1'b1 )
465 
       rgpio_out [gw-1:0] <= #1 wb_dat_i [gw-1:0] ;
466 
`endif
467 
   end
468 
 
469 
`else
470 
assign rgpio_out = `GPIO_DEF_RGPIO_OUT; // RGPIO_OUT = 0x0
471 
`endif
472 
 
473 
//
474 
// Write to RGPIO_OE.
475 
//
476 
`ifdef GPIO_RGPIO_OE
477 
always @(posedge wb_clk_i or posedge wb_rst_i)
478 
        if (wb_rst_i)
479 
                rgpio_oe <= #1 {gw{1'b0}};
480 
        else if (rgpio_oe_sel && wb_we_i)
481 
  begin
482 
`ifdef GPIO_STRICT_32BIT_ACCESS
483 
                rgpio_oe <= #1 wb_dat_i[gw-1:0];
484 
`endif
485 
 
486 
`ifdef GPIO_WB_BYTES4
487 
     if ( wb_sel_i [3] == 1'b1 )
488 
       rgpio_oe [gw-1:24] <= #1 wb_dat_i [gw-1:24] ;
489 
     if ( wb_sel_i [2] == 1'b1 )
490 
       rgpio_oe [23:16] <= #1 wb_dat_i [23:16] ;
491 
     if ( wb_sel_i [1] == 1'b1 )
492 
       rgpio_oe [15:8] <= #1 wb_dat_i [15:8] ;
493 
     if ( wb_sel_i [0] == 1'b1 )
494 
       rgpio_oe [7:0] <= #1 wb_dat_i [7:0] ;
495 
`endif
496 
`ifdef GPIO_WB_BYTES3
497 
     if ( wb_sel_i [2] == 1'b1 )
498 
       rgpio_oe [gw-1:16] <= #1 wb_dat_i [gw-1:16] ;
499 
     if ( wb_sel_i [1] == 1'b1 )
500 
       rgpio_oe [15:8] <= #1 wb_dat_i [15:8] ;
501 
     if ( wb_sel_i [0] == 1'b1 )
502 
       rgpio_oe [7:0] <= #1 wb_dat_i [7:0] ;
503 
`endif
504 
`ifdef GPIO_WB_BYTES2
505 
     if ( wb_sel_i [1] == 1'b1 )
506 
       rgpio_oe [gw-1:8] <= #1 wb_dat_i [gw-1:8] ;
507 
     if ( wb_sel_i [0] == 1'b1 )
508 
       rgpio_oe [7:0] <= #1 wb_dat_i [7:0] ;
509 
`endif
510 
`ifdef GPIO_WB_BYTES1
511 
     if ( wb_sel_i [0] == 1'b1 )
512 
       rgpio_oe [gw-1:0] <= #1 wb_dat_i [gw-1:0] ;
513 
`endif
514 
   end
515 
 
516 
`else
517 
assign rgpio_oe = `GPIO_DEF_RGPIO_OE;   // RGPIO_OE = 0x0
518 
`endif
519 
 
520 
//
521 
// Write to RGPIO_INTE
522 
//
523 
`ifdef GPIO_RGPIO_INTE
524 
always @(posedge wb_clk_i or posedge wb_rst_i)
525 
        if (wb_rst_i)
526 
                rgpio_inte <= #1 {gw{1'b0}};
527 
        else if (rgpio_inte_sel && wb_we_i)
528 
  begin
529 
`ifdef GPIO_STRICT_32BIT_ACCESS
530 
                rgpio_inte <= #1 wb_dat_i[gw-1:0];
531 
`endif
532 
 
533 
`ifdef GPIO_WB_BYTES4
534 
     if ( wb_sel_i [3] == 1'b1 )
535 
       rgpio_inte [gw-1:24] <= #1 wb_dat_i [gw-1:24] ;
536 
     if ( wb_sel_i [2] == 1'b1 )
537 
       rgpio_inte [23:16] <= #1 wb_dat_i [23:16] ;
538 
     if ( wb_sel_i [1] == 1'b1 )
539 
       rgpio_inte [15:8] <= #1 wb_dat_i [15:8] ;
540 
     if ( wb_sel_i [0] == 1'b1 )
541 
       rgpio_inte [7:0] <= #1 wb_dat_i [7:0] ;
542 
`endif
543 
`ifdef GPIO_WB_BYTES3
544 
     if ( wb_sel_i [2] == 1'b1 )
545 
       rgpio_inte [gw-1:16] <= #1 wb_dat_i [gw-1:16] ;
546 
     if ( wb_sel_i [1] == 1'b1 )
547 
       rgpio_inte [15:8] <= #1 wb_dat_i [15:8] ;
548 
     if ( wb_sel_i [0] == 1'b1 )
549 
       rgpio_inte [7:0] <= #1 wb_dat_i [7:0] ;
550 
`endif
551 
`ifdef GPIO_WB_BYTES2
552 
     if ( wb_sel_i [1] == 1'b1 )
553 
       rgpio_inte [gw-1:8] <= #1 wb_dat_i [gw-1:8] ;
554 
     if ( wb_sel_i [0] == 1'b1 )
555 
       rgpio_inte [7:0] <= #1 wb_dat_i [7:0] ;
556 
`endif
557 
`ifdef GPIO_WB_BYTES1
558 
     if ( wb_sel_i [0] == 1'b1 )
559 
       rgpio_inte [gw-1:0] <= #1 wb_dat_i [gw-1:0] ;
560 
`endif
561 
   end
562 
 
563 
 
564 
`else
565 
assign rgpio_inte = `GPIO_DEF_RGPIO_INTE;       // RGPIO_INTE = 0x0
566 
`endif
567 
 
568 
//
569 
// Write to RGPIO_PTRIG
570 
//
571 
`ifdef GPIO_RGPIO_PTRIG
572 
always @(posedge wb_clk_i or posedge wb_rst_i)
573 
        if (wb_rst_i)
574 
                rgpio_ptrig <= #1 {gw{1'b0}};
575 
        else if (rgpio_ptrig_sel && wb_we_i)
576 
  begin
577 
`ifdef GPIO_STRICT_32BIT_ACCESS
578 
                rgpio_ptrig <= #1 wb_dat_i[gw-1:0];
579 
`endif
580 
 
581 
`ifdef GPIO_WB_BYTES4
582 
     if ( wb_sel_i [3] == 1'b1 )
583 
       rgpio_ptrig [gw-1:24] <= #1 wb_dat_i [gw-1:24] ;
584 
     if ( wb_sel_i [2] == 1'b1 )
585 
       rgpio_ptrig [23:16] <= #1 wb_dat_i [23:16] ;
586 
     if ( wb_sel_i [1] == 1'b1 )
587 
       rgpio_ptrig [15:8] <= #1 wb_dat_i [15:8] ;
588 
     if ( wb_sel_i [0] == 1'b1 )
589 
       rgpio_ptrig [7:0] <= #1 wb_dat_i [7:0] ;
590 
`endif
591 
`ifdef GPIO_WB_BYTES3
592 
     if ( wb_sel_i [2] == 1'b1 )
593 
       rgpio_ptrig [gw-1:16] <= #1 wb_dat_i [gw-1:16] ;
594 
     if ( wb_sel_i [1] == 1'b1 )
595 
       rgpio_ptrig [15:8] <= #1 wb_dat_i [15:8] ;
596 
     if ( wb_sel_i [0] == 1'b1 )
597 
       rgpio_ptrig [7:0] <= #1 wb_dat_i [7:0] ;
598 
`endif
599 
`ifdef GPIO_WB_BYTES2
600 
     if ( wb_sel_i [1] == 1'b1 )
601 
       rgpio_ptrig [gw-1:8] <= #1 wb_dat_i [gw-1:8] ;
602 
     if ( wb_sel_i [0] == 1'b1 )
603 
       rgpio_ptrig [7:0] <= #1 wb_dat_i [7:0] ;
604 
`endif
605 
`ifdef GPIO_WB_BYTES1
606 
     if ( wb_sel_i [0] == 1'b1 )
607 
       rgpio_ptrig [gw-1:0] <= #1 wb_dat_i [gw-1:0] ;
608 
`endif
609 
   end
610 
 
611 
`else
612 
assign rgpio_ptrig = `GPIO_DEF_RGPIO_PTRIG;     // RGPIO_PTRIG = 0x0
613 
`endif
614 
 
615 
//
616 
// Write to RGPIO_AUX
617 
//
618 
`ifdef GPIO_RGPIO_AUX
619 
always @(posedge wb_clk_i or posedge wb_rst_i)
620 
        if (wb_rst_i)
621 
                rgpio_aux <= #1 {gw{1'b0}};
622 
        else if (rgpio_aux_sel && wb_we_i)
623 
  begin
624 
`ifdef GPIO_STRICT_32BIT_ACCESS
625 
                rgpio_aux <= #1 wb_dat_i[gw-1:0];
626 
`endif
627 
 
628 
`ifdef GPIO_WB_BYTES4
629 
     if ( wb_sel_i [3] == 1'b1 )
630 
       rgpio_aux [gw-1:24] <= #1 wb_dat_i [gw-1:24] ;
631 
     if ( wb_sel_i [2] == 1'b1 )
632 
       rgpio_aux [23:16] <= #1 wb_dat_i [23:16] ;
633 
     if ( wb_sel_i [1] == 1'b1 )
634 
       rgpio_aux [15:8] <= #1 wb_dat_i [15:8] ;
635 
     if ( wb_sel_i [0] == 1'b1 )
636 
       rgpio_aux [7:0] <= #1 wb_dat_i [7:0] ;
637 
`endif
638 
`ifdef GPIO_WB_BYTES3
639 
     if ( wb_sel_i [2] == 1'b1 )
640 
       rgpio_aux [gw-1:16] <= #1 wb_dat_i [gw-1:16] ;
641 
     if ( wb_sel_i [1] == 1'b1 )
642 
       rgpio_aux [15:8] <= #1 wb_dat_i [15:8] ;
643 
     if ( wb_sel_i [0] == 1'b1 )
644 
       rgpio_aux [7:0] <= #1 wb_dat_i [7:0] ;
645 
`endif
646 
`ifdef GPIO_WB_BYTES2
647 
     if ( wb_sel_i [1] == 1'b1 )
648 
       rgpio_aux [gw-1:8] <= #1 wb_dat_i [gw-1:8] ;
649 
     if ( wb_sel_i [0] == 1'b1 )
650 
       rgpio_aux [7:0] <= #1 wb_dat_i [7:0] ;
651 
`endif
652 
`ifdef GPIO_WB_BYTES1
653 
     if ( wb_sel_i [0] == 1'b1 )
654 
       rgpio_aux [gw-1:0] <= #1 wb_dat_i [gw-1:0] ;
655 
`endif
656 
   end
657 
 
658 
`else
659 
assign rgpio_aux = `GPIO_DEF_RGPIO_AUX; // RGPIO_AUX = 0x0
660 
`endif
661 
 
662 
 
663 
//
664 
// Write to RGPIO_ECLK
665 
//
666 
`ifdef GPIO_RGPIO_ECLK
667 
always @(posedge wb_clk_i or posedge wb_rst_i)
668 
        if (wb_rst_i)
669 
                rgpio_eclk <= #1 {gw{1'b0}};
670 
        else if (rgpio_eclk_sel && wb_we_i)
671 
  begin
672 
`ifdef GPIO_STRICT_32BIT_ACCESS
673 
                rgpio_eclk <= #1 wb_dat_i[gw-1:0];
674 
`endif
675 
 
676 
`ifdef GPIO_WB_BYTES4
677 
     if ( wb_sel_i [3] == 1'b1 )
678 
       rgpio_eclk [gw-1:24] <= #1 wb_dat_i [gw-1:24] ;
679 
     if ( wb_sel_i [2] == 1'b1 )
680 
       rgpio_eclk [23:16] <= #1 wb_dat_i [23:16] ;
681 
     if ( wb_sel_i [1] == 1'b1 )
682 
       rgpio_eclk [15:8] <= #1 wb_dat_i [15:8] ;
683 
     if ( wb_sel_i [0] == 1'b1 )
684 
       rgpio_eclk [7:0] <= #1 wb_dat_i [7:0] ;
685 
`endif
686 
`ifdef GPIO_WB_BYTES3
687 
     if ( wb_sel_i [2] == 1'b1 )
688 
       rgpio_eclk [gw-1:16] <= #1 wb_dat_i [gw-1:16] ;
689 
     if ( wb_sel_i [1] == 1'b1 )
690 
       rgpio_eclk [15:8] <= #1 wb_dat_i [15:8] ;
691 
     if ( wb_sel_i [0] == 1'b1 )
692 
       rgpio_eclk [7:0] <= #1 wb_dat_i [7:0] ;
693 
`endif
694 
`ifdef GPIO_WB_BYTES2
695 
     if ( wb_sel_i [1] == 1'b1 )
696 
       rgpio_eclk [gw-1:8] <= #1 wb_dat_i [gw-1:8] ;
697 
     if ( wb_sel_i [0] == 1'b1 )
698 
       rgpio_eclk [7:0] <= #1 wb_dat_i [7:0] ;
699 
`endif
700 
`ifdef GPIO_WB_BYTES1
701 
     if ( wb_sel_i [0] == 1'b1 )
702 
       rgpio_eclk [gw-1:0] <= #1 wb_dat_i [gw-1:0] ;
703 
`endif
704 
   end
705 
 
706 
 
707 
`else
708 
assign rgpio_eclk = `GPIO_DEF_RGPIO_ECLK;       // RGPIO_ECLK = 0x0
709 
`endif
710 
 
711 
 
712 
 
713 
//
714 
// Write to RGPIO_NEC
715 
//
716 
`ifdef GPIO_RGPIO_NEC
717 
always @(posedge wb_clk_i or posedge wb_rst_i)
718 
        if (wb_rst_i)
719 
                rgpio_nec <= #1 {gw{1'b0}};
720 
        else if (rgpio_nec_sel && wb_we_i)
721 
  begin
722 
`ifdef GPIO_STRICT_32BIT_ACCESS
723 
                rgpio_nec <= #1 wb_dat_i[gw-1:0];
724 
`endif
725 
 
726 
`ifdef GPIO_WB_BYTES4
727 
     if ( wb_sel_i [3] == 1'b1 )
728 
       rgpio_nec [gw-1:24] <= #1 wb_dat_i [gw-1:24] ;
729 
     if ( wb_sel_i [2] == 1'b1 )
730 
       rgpio_nec [23:16] <= #1 wb_dat_i [23:16] ;
731 
     if ( wb_sel_i [1] == 1'b1 )
732 
       rgpio_nec [15:8] <= #1 wb_dat_i [15:8] ;
733 
     if ( wb_sel_i [0] == 1'b1 )
734 
       rgpio_nec [7:0] <= #1 wb_dat_i [7:0] ;
735 
`endif
736 
`ifdef GPIO_WB_BYTES3
737 
     if ( wb_sel_i [2] == 1'b1 )
738 
       rgpio_nec [gw-1:16] <= #1 wb_dat_i [gw-1:16] ;
739 
     if ( wb_sel_i [1] == 1'b1 )
740 
       rgpio_nec [15:8] <= #1 wb_dat_i [15:8] ;
741 
     if ( wb_sel_i [0] == 1'b1 )
742 
       rgpio_nec [7:0] <= #1 wb_dat_i [7:0] ;
743 
`endif
744 
`ifdef GPIO_WB_BYTES2
745 
     if ( wb_sel_i [1] == 1'b1 )
746 
       rgpio_nec [gw-1:8] <= #1 wb_dat_i [gw-1:8] ;
747 
     if ( wb_sel_i [0] == 1'b1 )
748 
       rgpio_nec [7:0] <= #1 wb_dat_i [7:0] ;
749 
`endif
750 
`ifdef GPIO_WB_BYTES1
751 
     if ( wb_sel_i [0] == 1'b1 )
752 
       rgpio_nec [gw-1:0] <= #1 wb_dat_i [gw-1:0] ;
753 
`endif
754 
   end
755 
 
756 
 
757 
`else
758 
assign rgpio_nec = `GPIO_DEF_RGPIO_NEC; // RGPIO_NEC = 0x0
759 
`endif
760 
 
761 
//
762 
// synchronize inputs to systam clock
763 
//
764 
`ifdef  GPIO_SYNC_IN_WB
765 
always @(posedge wb_clk_i or posedge wb_rst_i)
766 
  if (wb_rst_i) begin
767 
    sync      <= #1 {gw{1'b0}} ;
768 
    ext_pad_s <= #1 {gw{1'b0}} ;
769 
  end else begin
770 
    sync      <= #1 ext_pad_i  ;
771 
    ext_pad_s <= #1 sync       ;
772 
  end
773 
`else
774 
assign  ext_pad_s = ext_pad_i;
775 
`endif // GPIO_SYNC_IN_WB
776 
 
777 
//
778 
// Latch into RGPIO_IN
779 
//
780 
`ifdef GPIO_RGPIO_IN
781 
always @(posedge wb_clk_i or posedge wb_rst_i)
782 
        if (wb_rst_i)
783 
                rgpio_in <= #1 {gw{1'b0}};
784 
        else
785 
                rgpio_in <= #1 in_muxed;
786 
`else
787 
assign rgpio_in = in_muxed;
788 
`endif
789 
 
790 
`ifdef GPIO_CLKPAD
791 
 
792 
`ifdef GPIO_SYNC_CLK_WB
793 
//
794 
// external clock enabled
795 
// synchronized to system clock
796 
// (one clock domain)
797 
//
798 
 
799 
reg  sync_clk,
800 
     clk_s   ,
801 
     clk_r   ;
802 
wire pedge   ,
803 
     nedge   ;
804 
wire [gw-1:0] pedge_vec   ,
805 
              nedge_vec   ;
806 
wire [gw-1:0] in_lach     ;
807 
 
808 
assign pedge =  clk_s & !clk_r ;
809 
assign nedge = !clk_s &  clk_r ;
810 
assign pedge_vec = {gw{pedge}} ;
811 
assign nedge_vec = {gw{nedge}} ;
812 
 
813 
assign in_lach = (~rgpio_nec & pedge_vec) | (rgpio_nec & nedge_vec) ;
814 
assign extc_in = (in_lach & ext_pad_s) | (~in_lach & pextc_sampled) ;
815 
 
816 
always @(posedge wb_clk_i or posedge wb_rst_i)
817 
  if (wb_rst_i) begin
818 
    sync_clk <= #1 1'b0 ;
819 
    clk_s    <= #1 1'b0 ;
820 
    clk_r    <= #1 1'b0 ;
821 
  end else begin
822 
    sync_clk <= #1 clk_pad_i ;
823 
    clk_s    <= #1 sync_clk  ;
824 
    clk_r    <= #1 clk_s     ;
825 
  end
826 
 
827 
always @(posedge wb_clk_i or posedge wb_rst_i)
828 
  if (wb_rst_i) begin
829 
    pextc_sampled <= #1 {gw{1'b0}};
830 
  end else begin
831 
    pextc_sampled <= #1 extc_in ;
832 
  end
833 
 
834 
assign in_muxed = (rgpio_eclk & pextc_sampled) | (~rgpio_eclk & ext_pad_s) ;
835 
 
836 
`else
837 
//
838 
// external clock enabled
839 
// not  synchronized to system clock
840 
// (two clock domains)
841 
//
842 
 
843 
`ifdef GPIO_SYNC_IN_CLK_WB
844 
 
845 
reg [gw-1:0] syn_extc  ,
846 
             extc_s    ;
847 
 
848 
always @(posedge wb_clk_i or posedge wb_rst_i)
849 
  if (wb_rst_i) begin
850 
    syn_extc  <= #1 {gw{1'b0}};
851 
    extc_s    <= #1 {gw{1'b0}};
852 
  end else begin
853 
    syn_extc  <= #1 extc_in ;
854 
    extc_s    <= #1 syn_extc;
855 
  end
856 
 
857 
`else
858 
 
859 
wire [gw-1:0] extc_s   ;
860 
assign extc_s = syn_extc ;
861 
 
862 
`endif // GPIO_SYNC_IN_CLK_WB
863 
 
864 
`ifdef GPIO_SYNC_IN_CLK
865 
reg [gw-1:0] syn_pclk    ,
866 
             ext_pad_spc ;
867 
 
868 
always @(posedge clk_pad_i or posedge wb_rst_i)
869 
  if (wb_rst_i) begin
870 
    syn_pclk    <= #1 {gw{1'b0}} ;
871 
    ext_pad_spc <= #1 {gw{1'b0}} ;
872 
  end else begin
873 
    syn_pclk    <= #1 ext_pad_i ;
874 
    ext_pad_spc <= #1 syn_pclk  ;
875 
  end
876 
 
877 
`else
878 
 
879 
wire [gw-1:0] ext_pad_spc      ;
880 
assign ext_pad_spc = ext_pad_i ;
881 
 
882 
`endif // GPIO_SYNC_IN_CLK
883 
 
884 
always @(posedge clk_pad_i or posedge wb_rst_i)
885 
  if (wb_rst_i) begin
886 
    pextc_sampled <= #1 {gw{1'b0}};
887 
  end else begin
888 
    pextc_sampled <= #1 ext_pad_spc ;
889 
  end
890 
 
891 
 
892 
`ifdef GPIO_NO_NEGEDGE_FLOPS
893 
 
894 
`ifdef GPIO_NO_CLKPAD_LOGIC
895 
 
896 
assign extc_in = pextc_sampled;
897 
 
898 
`else
899 
 
900 
wire  clk_n;
901 
assign clk_n = !clk_pad_i;
902 
 
903 
`ifdef GPIO_SYNC_IN_CLK
904 
reg [gw-1:0] syn_nclk    ,
905 
             ext_pad_snc ;
906 
 
907 
always @(posedge clk_n or posedge wb_rst_i)
908 
  if (wb_rst_i) begin
909 
    syn_nclk    <= #1 {gw{1'b0}} ;
910 
    ext_pad_snc <= #1 {gw{1'b0}} ;
911 
  end else begin
912 
    syn_nclk    <= #1 ext_pad_i ;
913 
    ext_pad_snc <= #1 syn_nclk  ;
914 
  end
915 
 
916 
`else
917 
 
918 
wire [gw-1:0] ext_pad_snc      ;
919 
assign ext_pad_snc = ext_pad_i ;
920 
 
921 
`endif // GPIO_SYNC_IN_CLK
922 
 
923 
always @(posedge clk_n or posedge wb_rst_i)
924 
  if (wb_rst_i) begin
925 
    nextc_sampled <= #1 {gw{1'b0}};
926 
  end else begin
927 
    nextc_sampled <= #1 ext_pad_snc ;
928 
  end
929 
 
930 
assign extc_in = (~rgpio_nec & pextc_sampled) | (rgpio_nec & nextc_sampled) ;
931 
 
932 
`endif //  GPIO_NO_CLKPAD_LOGIC
933 
 
934 
 
935 
`else
936 
 
937 
`ifdef GPIO_SYNC_IN_CLK
938 
reg [gw-1:0] syn_nclk    ,
939 
             ext_pad_snc ;
940 
 
941 
always @(negedge clk_n or posedge wb_rst_i)
942 
  if (wb_rst_i) begin
943 
    syn_nclk    <= #1 {gw{1'b0}} ;
944 
    ext_pad_snc <= #1 {gw{1'b0}} ;
945 
  end else begin
946 
    syn_nclk    <= #1 ext_pad_i ;
947 
    ext_pad_snc <= #1 syn_nclk  ;
948 
  end
949 
 
950 
`else
951 
 
952 
wire [gw-1:0] ext_pad_snc      ;
953 
assign ext_pad_snc = ext_pad_i ;
954 
 
955 
`endif // GPIO_SYNC_IN_CLK
956 
 
957 
always @(negedge clk_pad_i or posedge wb_rst_i)
958 
  if (wb_rst_i) begin
959 
    nextc_sampled <= #1 {gw{1'b0}};
960 
  end else begin
961 
    nextc_sampled <= #1 ext_pad_snc ;
962 
  end
963 
 
964 
assign extc_in = (~rgpio_nec & pextc_sampled) | (rgpio_nec & nextc_sampled) ;
965 
 
966 
`endif //  GPIO_NO_NEGEDGE_FLOPS
967 
 
968 
assign in_muxed = (rgpio_eclk & extc_s)      | (~rgpio_eclk & ext_pad_s) ;
969 
 
970 
 
971 
`endif //  GPIO_SYNC_CLK_WB
972 
 
973 
 
974 
`else
975 
 
976 
assign  in_muxed  = ext_pad_s ;
977 
 
978 
`endif //  GPIO_CLKPAD
979 
 
980 
 
981 
 
982 
//
983 
// Mux all registers when doing a read of GPIO registers
984 
//
985 
always @(wb_adr_i or rgpio_in or rgpio_out or rgpio_oe or rgpio_inte or
986 
                rgpio_ptrig or rgpio_aux or rgpio_ctrl or rgpio_ints or rgpio_eclk or rgpio_nec)
987 
        case (wb_adr_i[`GPIO_OFS_BITS]) // synopsys full_case parallel_case
988 
`ifdef GPIO_READREGS
989 
  `ifdef GPIO_RGPIO_OUT
990 
        `GPIO_RGPIO_OUT: begin
991 
                        wb_dat[dw-1:0] = rgpio_out;
992 
                end
993 
  `endif
994 
  `ifdef GPIO_RGPIO_OE
995 
                `GPIO_RGPIO_OE: begin
996 
                        wb_dat[dw-1:0] = rgpio_oe;
997 
                end
998 
  `endif
999 
  `ifdef GPIO_RGPIO_INTE
1000 
                `GPIO_RGPIO_INTE: begin
1001 
                        wb_dat[dw-1:0] = rgpio_inte;
1002 
                end
1003 
  `endif
1004 
  `ifdef GPIO_RGPIO_PTRIG
1005 
                `GPIO_RGPIO_PTRIG: begin
1006 
                        wb_dat[dw-1:0] = rgpio_ptrig;
1007 
                end
1008 
  `endif
1009 
  `ifdef GPIO_RGPIO_NEC
1010 
                `GPIO_RGPIO_NEC: begin
1011 
                        wb_dat[dw-1:0] = rgpio_nec;
1012 
                end
1013 
  `endif
1014 
  `ifdef GPIO_RGPIO_ECLK
1015 
                `GPIO_RGPIO_ECLK: begin
1016 
                        wb_dat[dw-1:0] = rgpio_eclk;
1017 
                end
1018 
  `endif
1019 
  `ifdef GPIO_RGPIO_AUX
1020 
                `GPIO_RGPIO_AUX: begin
1021 
                        wb_dat[dw-1:0] = rgpio_aux;
1022 
                end
1023 
  `endif
1024 
  `ifdef GPIO_RGPIO_CTRL
1025 
                `GPIO_RGPIO_CTRL: begin
1026 
                        wb_dat[1:0] = rgpio_ctrl;
1027 
                        wb_dat[dw-1:2] = {dw-2{1'b0}};
1028 
                end
1029 
  `endif
1030 
`endif
1031 
  `ifdef GPIO_RGPIO_INTS
1032 
                `GPIO_RGPIO_INTS: begin
1033 
                        wb_dat[dw-1:0] = rgpio_ints;
1034 
                end
1035 
  `endif
1036 
                default: begin
1037 
                        wb_dat[dw-1:0] = rgpio_in;
1038 
                end
1039 
        endcase
1040 
 
1041 
//
1042 
// WB data output
1043 
//
1044 
`ifdef GPIO_REGISTERED_WB_OUTPUTS
1045 
always @(posedge wb_clk_i or posedge wb_rst_i)
1046 
        if (wb_rst_i)
1047 
                wb_dat_o <= #1 {dw{1'b0}};
1048 
        else
1049 
                wb_dat_o <= #1 wb_dat;
1050 
`else
1051 
assign wb_dat_o = wb_dat;
1052 
`endif
1053 
 
1054 
//
1055 
// RGPIO_INTS
1056 
//
1057 
`ifdef GPIO_RGPIO_INTS
1058 
always @(posedge wb_clk_i or posedge wb_rst_i)
1059 
        if (wb_rst_i)
1060 
                rgpio_ints <= #1 {gw{1'b0}};
1061 
        else if (rgpio_ints_sel && wb_we_i)
1062 
                rgpio_ints <= #1 wb_dat_i[gw-1:0];
1063 
        else if (rgpio_ctrl[`GPIO_RGPIO_CTRL_INTE])
1064 
                rgpio_ints <= #1 (rgpio_ints | ((in_muxed ^ rgpio_in) & ~(in_muxed ^ rgpio_ptrig)) & rgpio_inte);
1065 
`else
1066 
assign rgpio_ints = (rgpio_ints | ((in_muxed ^ rgpio_in) & ~(in_muxed ^ rgpio_ptrig)) & rgpio_inte);
1067 
`endif
1068 
 
1069 
//
1070 
// Generate interrupt request
1071 
//
1072 
assign wb_inta = |rgpio_ints ? rgpio_ctrl[`GPIO_RGPIO_CTRL_INTE] : 1'b0;
1073 
 
1074 
//
1075 
// Optional registration of WB interrupt
1076 
//
1077 
`ifdef GPIO_REGISTERED_WB_OUTPUTS
1078 
always @(posedge wb_clk_i or posedge wb_rst_i)
1079 
        if (wb_rst_i)
1080 
                wb_inta_o <= #1 1'b0;
1081 
        else
1082 
                wb_inta_o <= #1 wb_inta;
1083 
`else
1084 
assign wb_inta_o = wb_inta;
1085 
`endif // GPIO_REGISTERED_WB_OUTPUTS
1086 
 
1087 
//
1088 
// Output enables are RGPIO_OE bits
1089 
//
1090 
assign ext_padoe_o = rgpio_oe;
1091 
 
1092 
//
1093 
// Generate GPIO outputs
1094 
//
1095 
`ifdef GPIO_AUX_IMPLEMENT
1096 
assign out_pad = rgpio_out & ~rgpio_aux | aux_i & rgpio_aux;
1097 
`else
1098 
assign out_pad = rgpio_out ;
1099 
`endif //  GPIO_AUX_IMPLEMENT
1100 
 
1101 
//
1102 
// Optional registration of GPIO outputs
1103 
//
1104 
`ifdef GPIO_REGISTERED_IO_OUTPUTS
1105 
always @(posedge wb_clk_i or posedge wb_rst_i)
1106 
        if (wb_rst_i)
1107 
                ext_pad_o <= #1 {gw{1'b0}};
1108 
        else
1109 
                ext_pad_o <= #1 out_pad;
1110 
`else
1111 
assign ext_pad_o = out_pad;
1112 
`endif // GPIO_REGISTERED_IO_OUTPUTS
1113 
 
1114 
 
1115 
`else
1116 
 
1117 
//
1118 
// When GPIO is not implemented, drive all outputs as would when RGPIO_CTRL
1119 
// is cleared and WISHBONE transfers complete with errors
1120 
//
1121 
assign wb_inta_o = 1'b0;
1122 
assign wb_ack_o = 1'b0;
1123 
assign wb_err_o = wb_cyc_i & wb_stb_i;
1124 
assign ext_padoe_o = {gw{1'b1}};
1125 
assign ext_pad_o = {gw{1'b0}};
1126 
 
1127 
//
1128 
// Read GPIO registers
1129 
//
1130 
assign wb_dat_o = {dw{1'b0}};
1131 
 
1132 
`endif //  GPIO_IMPLEMENTED
1133 
 
1134 
endmodule
1135 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.