OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [trunk/] [utils/] [contributions/] [gpio/] [rtl/] [minsoc_spartan_3a_starter_kit_ios.v] - Blame information for rev 50

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 40 rfajardo 
//////////////////////////////////////////////////////////////////////////////////
2 
// Company:
3 
// Engineer:
4 
//
5 
// Create Date:    11:51:27 10/29/2009
6 
// Design Name:
7 
// Module Name:    minsoc_spartan_3a_starter_kit_ios
8 
// Project Name:
9 
// Target Devices:
10 
// Tool versions:
11 
// Description:
12 
//
13 
// Dependencies:
14 
//
15 
// Revision:
16 
// Revision 0.01 - File Created
17 
// Additional Comments:
18 
//
19 
//////////////////////////////////////////////////////////////////////////////////
20 
 
21 
module minsoc_spartan_3a_starter_kit_ios
22 
(
23 
    // Signals from GPIO Core
24 
    ext_pad_o,
25 
    ext_pad_oe,
26 
    ext_pad_i,
27 
 
28 
         // Signals driving external pins
29 
    i_pins,
30 
    o_pins,
31 
    io_pins
32 
);
33 
         parameter gpio_num = 32;
34 
         parameter i_line_num = 8;
35 
         parameter o_line_num = 8;
36 
         parameter io_line_num= 8;
37 
 
38 
    input  [gpio_num-1:0] ext_pad_o;
39 
    input  [gpio_num-1:0] ext_pad_oe;
40 
    output [gpio_num-1:0] ext_pad_i;
41 
 
42 
    input  [i_line_num-1:0] i_pins;
43 
    output [o_line_num-1:0] o_pins;
44 
    inout  [io_line_num-1:0] io_pins;
45 
 
46 
         IOBUF #(
47 
      .DRIVE(12), // Specify the output drive strength
48 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
49 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
50 
      .IOSTANDARD("DEFAULT"), // Specify the I/O standard
51 
      .SLEW("SLOW") // Specify the output slew rate
52 
    ) IOBUF_inst_0 (
53 
          .O(ext_pad_i[0]),     // Buffer output
54 
          .IO(io_pins[0]),   // Buffer inout port (connect directly to top-level port)
55 
          .I(ext_pad_o[0]),     // Buffer input
56 
          .T(~ext_pad_oe[0])      // 3-state enable input
57 
    );
58 
 
59 
         IOBUF #(
60 
      .DRIVE(12), // Specify the output drive strength
61 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
62 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
63 
      .IOSTANDARD("DEFAULT"), // Specify the I/O standard
64 
      .SLEW("SLOW") // Specify the output slew rate
65 
    ) IOBUF_inst_1 (
66 
          .O(ext_pad_i[1]),     // Buffer output
67 
          .IO(io_pins[1]),   // Buffer inout port (connect directly to top-level port)
68 
          .I(ext_pad_o[1]),     // Buffer input
69 
          .T(~ext_pad_oe[1])      // 3-state enable input
70 
    );
71 
 
72 
         IOBUF #(
73 
      .DRIVE(12), // Specify the output drive strength
74 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
75 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
76 
      .IOSTANDARD("DEFAULT"), // Specify the I/O standard
77 
      .SLEW("SLOW") // Specify the output slew rate
78 
    ) IOBUF_inst_2 (
79 
          .O(ext_pad_i[2]),     // Buffer output
80 
          .IO(io_pins[2]),   // Buffer inout port (connect directly to top-level port)
81 
          .I(ext_pad_o[2]),     // Buffer input
82 
          .T(~ext_pad_oe[2])      // 3-state enable input
83 
    );
84 
 
85 
         IOBUF #(
86 
      .DRIVE(12), // Specify the output drive strength
87 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
88 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
89 
      .IOSTANDARD("DEFAULT"), // Specify the I/O standard
90 
      .SLEW("SLOW") // Specify the output slew rate
91 
    ) IOBUF_inst_3 (
92 
          .O(ext_pad_i[3]),     // Buffer output
93 
          .IO(io_pins[3]),   // Buffer inout port (connect directly to top-level port)
94 
          .I(ext_pad_o[3]),     // Buffer input
95 
          .T(~ext_pad_oe[3])      // 3-state enable input
96 
    );
97 
 
98 
         IOBUF #(
99 
      .DRIVE(12), // Specify the output drive strength
100 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
101 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
102 
      .IOSTANDARD("DEFAULT"), // Specify the I/O standard
103 
      .SLEW("SLOW") // Specify the output slew rate
104 
    ) IOBUF_inst_4 (
105 
          .O(ext_pad_i[4]),     // Buffer output
106 
          .IO(io_pins[4]),   // Buffer inout port (connect directly to top-level port)
107 
          .I(ext_pad_o[4]),     // Buffer input
108 
          .T(~ext_pad_oe[4])      // 3-state enable input
109 
    );
110 
 
111 
         IOBUF #(
112 
      .DRIVE(12), // Specify the output drive strength
113 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
114 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
115 
      .IOSTANDARD("DEFAULT"), // Specify the I/O standard
116 
      .SLEW("SLOW") // Specify the output slew rate
117 
    ) IOBUF_inst_5 (
118 
          .O(ext_pad_i[5]),     // Buffer output
119 
          .IO(io_pins[5]),   // Buffer inout port (connect directly to top-level port)
120 
          .I(ext_pad_o[5]),     // Buffer input
121 
          .T(~ext_pad_oe[5])      // 3-state enable input
122 
    );
123 
 
124 
         IOBUF #(
125 
      .DRIVE(12), // Specify the output drive strength
126 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
127 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
128 
      .IOSTANDARD("DEFAULT"), // Specify the I/O standard
129 
      .SLEW("SLOW") // Specify the output slew rate
130 
    ) IOBUF_inst_6 (
131 
          .O(ext_pad_i[6]),     // Buffer output
132 
          .IO(io_pins[6]),   // Buffer inout port (connect directly to top-level port)
133 
          .I(ext_pad_o[6]),     // Buffer input
134 
          .T(~ext_pad_oe[6])      // 3-state enable input
135 
    );
136 
 
137 
         IOBUF #(
138 
      .DRIVE(12), // Specify the output drive strength
139 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
140 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
141 
      .IOSTANDARD("DEFAULT"), // Specify the I/O standard
142 
      .SLEW("SLOW") // Specify the output slew rate
143 
    ) IOBUF_inst_7 (
144 
          .O(ext_pad_i[7]),     // Buffer output
145 
          .IO(io_pins[7]),   // Buffer inout port (connect directly to top-level port)
146 
          .I(ext_pad_o[7]),     // Buffer input
147 
          .T(~ext_pad_oe[7])      // 3-state enable input
148 
    );
149 
 
150 
 
151 
         IBUF #(
152 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for                                //   the buffer, "0"-"16" (Spartan-3E/3A only)
153 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input                                //   register, "AUTO", "0"-"8" (Spartan-3E/3A only)
154 
      .IOSTANDARD("DEFAULT")    // Specify the input I/O standard
155 
    )IBUF_inst_0 (
156 
      .O(ext_pad_i[8]),     // Buffer output
157 
      .I(i_pins[0])      // Buffer input (connect directly to top-level port)
158 
    );
159 
 
160 
         IBUF #(
161 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for                                //   the buffer, "0"-"16" (Spartan-3E/3A only)
162 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input                                //   register, "AUTO", "0"-"8" (Spartan-3E/3A only)
163 
      .IOSTANDARD("DEFAULT")    // Specify the input I/O standard
164 
    )IBUF_inst_1 (
165 
      .O(ext_pad_i[9]),     // Buffer output
166 
      .I(i_pins[1])      // Buffer input (connect directly to top-level port)
167 
    );
168 
 
169 
         IBUF #(
170 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for                                //   the buffer, "0"-"16" (Spartan-3E/3A only)
171 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input                                //   register, "AUTO", "0"-"8" (Spartan-3E/3A only)
172 
      .IOSTANDARD("DEFAULT")    // Specify the input I/O standard
173 
    )IBUF_inst_2 (
174 
      .O(ext_pad_i[10]),     // Buffer output
175 
      .I(i_pins[2])      // Buffer input (connect directly to top-level port)
176 
    );
177 
 
178 
         IBUF #(
179 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for                                //   the buffer, "0"-"16" (Spartan-3E/3A only)
180 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input                                //   register, "AUTO", "0"-"8" (Spartan-3E/3A only)
181 
      .IOSTANDARD("DEFAULT")    // Specify the input I/O standard
182 
    )IBUF_inst_3 (
183 
      .O(ext_pad_i[11]),     // Buffer output
184 
      .I(i_pins[3])      // Buffer input (connect directly to top-level port)
185 
    );
186 
 
187 
         IBUF #(
188 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for                                //   the buffer, "0"-"16" (Spartan-3E/3A only)
189 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input                                //   register, "AUTO", "0"-"8" (Spartan-3E/3A only)
190 
      .IOSTANDARD("DEFAULT")    // Specify the input I/O standard
191 
    )IBUF_inst_4 (
192 
      .O(ext_pad_i[12]),     // Buffer output
193 
      .I(i_pins[4])      // Buffer input (connect directly to top-level port)
194 
    );
195 
 
196 
         IBUF #(
197 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for                                //   the buffer, "0"-"16" (Spartan-3E/3A only)
198 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input                                //   register, "AUTO", "0"-"8" (Spartan-3E/3A only)
199 
      .IOSTANDARD("DEFAULT")    // Specify the input I/O standard
200 
    )IBUF_inst_5 (
201 
      .O(ext_pad_i[13]),     // Buffer output
202 
      .I(i_pins[5])      // Buffer input (connect directly to top-level port)
203 
    );
204 
 
205 
         /* PUSH Button NORTH is RESET.
206 
         IBUF #(
207 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for                                //   the buffer, "0"-"16" (Spartan-3E/3A only)
208 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input                                //   register, "AUTO", "0"-"8" (Spartan-3E/3A only)
209 
      .IOSTANDARD("DEFAULT")    // Specify the input I/O standard
210 
    )IBUF_inst_6 (
211 
      .O(ext_pad_i[14]),     // Buffer output
212 
      .I(i_pins[6])      // Buffer input (connect directly to top-level port)
213 
    );
214 
         */
215 
 
216 
         IBUF #(
217 
      .IBUF_DELAY_VALUE("0"),   // Specify the amount of added input delay for                                //   the buffer, "0"-"16" (Spartan-3E/3A only)
218 
      .IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input                                //   register, "AUTO", "0"-"8" (Spartan-3E/3A only)
219 
      .IOSTANDARD("DEFAULT")    // Specify the input I/O standard
220 
    )IBUF_inst_7 (
221 
      .O(ext_pad_i[15]),     // Buffer output
222 
      .I(i_pins[7])      // Buffer input (connect directly to top-level port)
223 
    );
224 
endmodule

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.