Subversion Repositories mips32r1

////////////////////////////////////////////////////////////////////////////////

// Copyright (c) 1995-2012 Xilinx, Inc.  All rights reserved.

////////////////////////////////////////////////////////////////////////////////

//   ____  ____ 

//  /   /\/   / 

// /___/  \  /    Vendor: Xilinx 

// \   \   \/     Version : 14.1

//  \   \         Application : xaw2verilog

//  /   /         Filename : pl3.v

// /___/   /\     Timestamp : 06/15/2012 18:39:50

// \   \  /  \ 

//  \___\/\___\ 

//

//Command: xaw2verilog -intstyle C:/root/Work/Gauss/XUM/delz/ipcore_dir/pl3.xaw -st pl3.v

//Design Name: pl3

//Device: xc5vlx110t-2ff1136

//

// Module pl3

// Generated by Xilinx Architecture Wizard

// Written for synthesis tool: XST

// For block PLL_ADV_INST, Estimated PLL Jitter for CLKOUT0 = 0.171 ns

// For block PLL_ADV_INST, Estimated PLL Jitter for CLKOUT1 = 0.149 ns

// For block PLL_ADV_INST, Estimated PLL Jitter for CLKOUT2 = 0.162 ns

`timescale 1ns / 1ps

module PLL_100MHz_to_50MHz_100MHz_66MHz(CLKIN1_IN,

           RST_IN,

           CLKOUT0_OUT,

           CLKOUT1_OUT,

           CLKOUT2_OUT,

           LOCKED_OUT);

    input CLKIN1_IN;

    input RST_IN;

   output CLKOUT0_OUT;

   output CLKOUT1_OUT;

   output CLKOUT2_OUT;

   output LOCKED_OUT;

   wire CLKFBOUT_CLKFBIN;

   wire CLKIN1_IBUFG;

   wire CLKOUT0_BUF;

   wire CLKOUT1_BUF;

   wire CLKOUT2_BUF;

   wire GND_BIT;

   wire [4:0] GND_BUS_5;

   wire [15:0] GND_BUS_16;

   wire VCC_BIT;

   assign GND_BIT = 0;

   assign GND_BUS_5 = 5'b00000;

   assign GND_BUS_16 = 16'b0000000000000000;

   assign VCC_BIT = 1;

   IBUFG  CLKIN1_IBUFG_INST (.I(CLKIN1_IN),

                            .O(CLKIN1_IBUFG));

   BUFG  CLKOUT0_BUFG_INST (.I(CLKOUT0_BUF),

                           .O(CLKOUT0_OUT));

   BUFG  CLKOUT1_BUFG_INST (.I(CLKOUT1_BUF),

                           .O(CLKOUT1_OUT));

   BUFG  CLKOUT2_BUFG_INST (.I(CLKOUT2_BUF),

                           .O(CLKOUT2_OUT));

   PLL_ADV #( .BANDWIDTH("OPTIMIZED"), .CLKIN1_PERIOD(10.000),

         .CLKIN2_PERIOD(10.000), .CLKOUT0_DIVIDE(8), .CLKOUT1_DIVIDE(4),

         .CLKOUT2_DIVIDE(6), .CLKOUT0_PHASE(0.000), .CLKOUT1_PHASE(0.000),

         .CLKOUT2_PHASE(0.000), .CLKOUT0_DUTY_CYCLE(0.500),

         .CLKOUT1_DUTY_CYCLE(0.500), .CLKOUT2_DUTY_CYCLE(0.500),

         .COMPENSATION("SYSTEM_SYNCHRONOUS"), .DIVCLK_DIVIDE(1),

         .CLKFBOUT_MULT(4), .CLKFBOUT_PHASE(0.0), .REF_JITTER(0.005000) )

         PLL_ADV_INST (.CLKFBIN(CLKFBOUT_CLKFBIN),

                         .CLKINSEL(VCC_BIT),

                         .CLKIN1(CLKIN1_IBUFG),

                         .CLKIN2(GND_BIT),

                         .DADDR(GND_BUS_5[4:0]),

                         .DCLK(GND_BIT),

                         .DEN(GND_BIT),

                         .DI(GND_BUS_16[15:0]),

                         .DWE(GND_BIT),

                         .REL(GND_BIT),

                         .RST(RST_IN),

                         .CLKFBDCM(),

                         .CLKFBOUT(CLKFBOUT_CLKFBIN),

                         .CLKOUTDCM0(),

                         .CLKOUTDCM1(),

                         .CLKOUTDCM2(),

                         .CLKOUTDCM3(),

                         .CLKOUTDCM4(),

                         .CLKOUTDCM5(),

                         .CLKOUT0(CLKOUT0_BUF),

                         .CLKOUT1(CLKOUT1_BUF),

                         .CLKOUT2(CLKOUT2_BUF),

                         .CLKOUT3(),

                         .CLKOUT4(),

                         .CLKOUT5(),

                         .DO(),

                         .DRDY(),

                         .LOCKED(LOCKED_OUT));

endmodule