Subversion Repositories mod_sim_exp

----------------------------------------------------------------------  

----  msec_axi_tb                                                 ---- 

----                                                              ---- 

----  This file is part of the                                    ----

----    Modular Simultaneous Exponentiation Core project          ---- 

----    http://www.opencores.org/cores/mod_sim_exp/               ---- 

----                                                              ---- 

----  Description                                                 ---- 

----    testbench for the AXI-Lite interface of the modular       ----

----    simultaneous exponentiation core. Performs some           ----

----    exponentiations to verify the design                      ----

----    Takes input parameters from in/sim_input.txt en writes    ----

----    result and output to out/axi_sim_output.txt. The AXI bus  ----

----    transfers ar written to out/axi_bus_output                ----

----                                                              ----

----  Dependencies:                                               ----

----    - msec_ipcore_axilite                                     ----

----                                                              ----

----  Authors:                                                    ----

----      - Geoffrey Ottoy, DraMCo research group                 ----

----      - Jonas De Craene, JonasDC@opencores.org                ---- 

----                                                              ---- 

---------------------------------------------------------------------- 

----                                                              ---- 

---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG   ---- 

----                                                              ---- 

---- This source file may be used and distributed without         ---- 

---- restriction provided that this copyright statement is not    ---- 

---- removed from the file and that any derivative work contains  ---- 

---- the original copyright notice and the associated disclaimer. ---- 

----                                                              ---- 

---- This source file is free software; you can redistribute it   ---- 

---- and/or modify it under the terms of the GNU Lesser General   ---- 

---- Public License as published by the Free Software Foundation; ---- 

---- either version 2.1 of the License, or (at your option) any   ---- 

---- later version.                                               ---- 

----                                                              ---- 

---- This source is distributed in the hope that it will be       ---- 

---- useful, but WITHOUT ANY WARRANTY; without even the implied   ---- 

---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ---- 

---- PURPOSE.  See the GNU Lesser General Public License for more ---- 

---- details.                                                     ---- 

----                                                              ---- 

---- You should have received a copy of the GNU Lesser General    ---- 

---- Public License along with this source; if not, download it   ---- 

---- from http://www.opencores.org/lgpl.shtml                     ---- 

----                                                              ---- 

----------------------------------------------------------------------

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_unsigned.all;

use ieee.std_logic_arith.all;

library std;

use std.textio.all;

library ieee;

use ieee.std_logic_textio.all;

entity msec_axi_tb is

end msec_axi_tb;

architecture arch of msec_axi_tb is

  -- constants

  constant CLK_PERIOD : time := 10 ns;

  constant CORE_CLK_PERIOD : time := 4 ns;

  constant C_S_AXI_DATA_WIDTH : integer := 32;

  constant C_S_AXI_ADDR_WIDTH : integer := 32;

  file output : text open write_mode is "out/axi_sim_output.txt";

  file axi_dbg : text open write_mode is "out/axi_bus_output.txt";

  file input  : text open read_mode is "src/sim_input.txt";

  ------------------------------------------------------------------

  -- Core parameters

  ------------------------------------------------------------------

  constant C_NR_BITS_TOTAL   : integer := 1536;

  constant C_NR_STAGES_TOTAL : integer := 96;

  constant C_NR_STAGES_LOW   : integer := 32;

  constant C_SPLIT_PIPELINE  : boolean := true;

  constant C_FIFO_AW         : integer := 7; -- set to log2( (maximum exponent width)/16 )

  constant C_MEM_STYLE       : string  := "xil_prim"; -- xil_prim, generic, asym are valid options

  constant C_FPGA_MAN        : string  := "xilinx";  -- xilinx, altera are valid options

  constant C_BASEADDR        : std_logic_vector(0 to 31) := x"A0000000";

  constant C_HIGHADDR        : std_logic_vector(0 to 31) := x"A0007FFF";

  -- extra calculated constants

  constant NR_BITS_LOW : integer := (C_NR_BITS_TOTAL/C_NR_STAGES_TOTAL)*C_NR_STAGES_LOW;

  constant NR_BITS_HIGH : integer := C_NR_BITS_TOTAL-NR_BITS_LOW;

  signal core_clk     : std_logic := '0';

  -------------------------

  -- AXI4lite interface

  -------------------------

  --- Global signals

  signal S_AXI_ACLK    : std_logic;

  signal S_AXI_ARESETN : std_logic;

  --- Write address channel

  signal S_AXI_AWADDR  : std_logic_vector(C_S_AXI_ADDR_WIDTH-1 downto 0);

  signal S_AXI_AWVALID : std_logic;

  signal S_AXI_AWREADY : std_logic;

  --- Write data channel

  signal S_AXI_WDATA  : std_logic_vector(C_S_AXI_DATA_WIDTH-1 downto 0);

  signal S_AXI_WVALID : std_logic;

  signal S_AXI_WREADY : std_logic;

  signal S_AXI_WSTRB  : std_logic_vector((C_S_AXI_DATA_WIDTH/8)-1 downto 0);

  --- Write response channel

  signal S_AXI_BVALID : std_logic;

  signal S_AXI_BREADY : std_logic;

  signal S_AXI_BRESP  : std_logic_vector(1 downto 0);

  --- Read address channel

  signal S_AXI_ARADDR  : std_logic_vector(C_S_AXI_ADDR_WIDTH-1 downto 0);

  signal S_AXI_ARVALID : std_logic;

  signal S_AXI_ARREADY : std_logic;

  --- Read data channel

  signal S_AXI_RDATA  : std_logic_vector(C_S_AXI_DATA_WIDTH-1 downto 0);

  signal S_AXI_RVALID : std_logic;

  signal S_AXI_RREADY : std_logic;

  signal S_AXI_RRESP  : std_logic_vector(1 downto 0);

  -- CORE control reg bits

  signal core_control_reg    : std_logic_vector(31 downto 0) := (others=>'0');

  signal core_start          : std_logic;

  signal core_exp_m          : std_logic;

  signal core_p_sel          : std_logic_vector(1 downto 0);

  signal core_dest_op_single : std_logic_vector(1 downto 0);

  signal core_x_sel_single   : std_logic_vector(1 downto 0);

  signal core_y_sel_single   : std_logic_vector(1 downto 0);

  signal core_modulus_sel    : std_logic;

  signal calc_time           : std_logic;

  signal IntrEvent           : std_logic;

begin

  -- map the core control bits to the core control register

  core_control_reg(31 downto 30) <= core_p_sel;

  core_control_reg(29 downto 28) <= core_dest_op_single;

  core_control_reg(27 downto 26) <= core_x_sel_single;

  core_control_reg(25 downto 24) <= core_y_sel_single;

  core_control_reg(23) <= core_start;

  core_control_reg(22) <= core_exp_m;

  core_control_reg(21) <= core_modulus_sel;

  ------------------------------------------

  -- Generate S_AXI_ACLK

  ------------------------------------------

  clk_process : process

  begin

    while (true) loop

      S_AXI_ACLK <= '0';

      wait for CLK_PERIOD/2;

      S_AXI_ACLK <= '1';

      wait for CLK_PERIOD/2;

    end loop;

  end process;

  core_clk_process : process

  begin

    while (true) loop

      core_clk <= '0';

      wait for CORE_CLK_PERIOD/2;

      core_clk <= '1';

      wait for CORE_CLK_PERIOD/2;

    end loop;

  end process;

  stim_proc : process

    -- variables to read file

    variable L : line;

    variable Lw : line;

    variable La : line;

    -- constants for memory space selection

    constant op_modulus : std_logic_vector(2 downto 0) := "000";

    constant op_0 : std_logic_vector(2 downto 0) := "001";

    constant op_1 : std_logic_vector(2 downto 0) := "010";

    constant op_2 : std_logic_vector(2 downto 0) := "011";

    constant op_3 : std_logic_vector(2 downto 0) := "100";

    constant fifo : std_logic_vector(2 downto 0) := "101";

    constant control_reg : std_logic_vector(2 downto 0) := "110";

    procedure waitclk(n : natural := 1) is

    begin

      for i in 1 to n loop

        wait until rising_edge(S_AXI_ACLK);

      end loop;

    end waitclk;

    procedure axi_write( variable address : std_logic_vector(31 downto 0);

                         variable data    : std_logic_vector(31 downto 0) ) is

      variable counter : integer := 0;

    begin

      -- place address on the bus

      wait until rising_edge(S_AXI_ACLK);

      S_AXI_AWADDR <= address;

      S_AXI_AWVALID <= '1';

      S_AXI_WDATA <= data;

      S_AXI_WVALID <= '1';

      S_AXI_WSTRB <= "1111";

      while (counter /= 2) loop -- wait for slave response

        wait until rising_edge(S_AXI_ACLK);

        if (S_AXI_AWREADY='1') then

          S_AXI_AWVALID <= '0';

          counter := counter+1;

        end if;

        if (S_AXI_WREADY='1') then

          S_AXI_WVALID <= '0';

          counter := counter+1;

        end if;

      end loop;

      S_AXI_BREADY <= '1';

      if S_AXI_BVALID/='1' then

        wait until S_AXI_BVALID='1';

      end if;

      write(La, string'("Wrote "));

      hwrite(La, data);

      write(La, string'(" to   "));

      hwrite(La, address);

      if (S_AXI_BRESP /= "00") then

        write(La, string'("   --> Error! Status: "));

        write(La, S_AXI_BRESP);

      end if;

      writeline(axi_dbg, La);

      wait until rising_edge(S_AXI_ACLK);

      S_AXI_BREADY <= '0';

    end axi_write;

    procedure axi_read( variable address  : std_logic_vector(31 downto 0);

                        variable data : out std_logic_vector(31 downto 0) ) is

    begin

      -- place address on the bus

      wait until rising_edge(S_AXI_ACLK);

      S_AXI_ARADDR <= address;

      S_AXI_ARVALID <= '1';

      wait until S_AXI_ARREADY='1';

      wait until rising_edge(S_AXI_ACLK);

      S_AXI_ARVALID <= '0';

      -- wait for read data

      S_AXI_RREADY <= '1';

      wait until S_AXI_RVALID='1';

      wait until rising_edge(S_AXI_ACLK);

      data := S_AXI_RDATA;

      write(La, string'("Read  "));

      hwrite(La, S_AXI_RDATA);

      write(La, string'(" from "));

      hwrite(La, address);

      if (S_AXI_RRESP /= "00") then

        write(La, string'("   --> Error! Status: "));

        write(La, S_AXI_RRESP);

      end if;

      writeline(axi_dbg, La);

      S_AXI_RREADY <= '0';

      --assert false report "Wrote " & " to " & " Status=" & to_string(S_AXI_BRESP) severity note;

    end axi_read;

    procedure axi_write_control_reg is

      variable address : std_logic_vector(31 downto 0);

      variable data    : std_logic_vector(31 downto 0);

    begin

      wait until rising_edge(S_AXI_ACLK);

      address := C_BASEADDR+x"00006000";

      data := core_control_reg;

      axi_write(address, data);

    end axi_write_control_reg;

    procedure loadOp(constant op_sel : std_logic_vector(2 downto 0);

                    variable op_data : std_logic_vector(2047 downto 0)) is

      variable address : std_logic_vector(31 downto 0);

      variable zero    : std_logic_vector(31 downto 0) := (others=>'0');

    begin

      -- set the start address

      address := C_BASEADDR(0 to 15) & '0' & op_sel & "0000" & "000000" & "00";

      -- write operand per 32 bits

      for i in 0 to (C_NR_BITS_TOTAL/32)-1 loop

        case (core_p_sel) is

          when "11" =>

            axi_write(address, op_data(((i+1)*32)-1 downto (i*32)));

          when "01" =>

            if (i < 16) then axi_write(address, op_data(((i+1)*32)-1 downto (i*32)));

            else axi_write(address, zero); end if;

          when "10" =>

            if (i >= 16) then axi_write(address, op_data(((i-15)*32)-1 downto ((i-16)*32)));

            else axi_write(address, zero); end if;

          when others =>

            axi_write(address, zero);

        end case;

        -- next address is 32 further

        address := address + "100";

      end loop;

    end loadOp;

    procedure readOp(constant op_sel : std_logic_vector(2 downto 0);

                    variable op_data  : out std_logic_vector(2047 downto 0);

                    variable op_width : integer) is

      variable address : std_logic_vector(31 downto 0);

      variable data    : std_logic_vector(31 downto 0);

    begin

      -- set destination operand, cause only can readfrom destination operand

      case op_sel is

        when "001" => core_dest_op_single <= "00";

        when "010" => core_dest_op_single <= "01";

        when "011" => core_dest_op_single <= "10";

        when "100" => core_dest_op_single <= "11";

        when others => core_dest_op_single <= "00";

      end case;

      axi_write_control_reg;

      -- set the start address

      if (core_p_sel = "10") then

        address := C_BASEADDR(0 to 15) & '0' & op_sel & "0000" & "010000" & "00";

      else

        address := C_BASEADDR(0 to 15) & '0' & op_sel & "0000" & "000000" & "00";

      end if;

      -- read the data

      for i in 0 to (op_width/32)-1 loop

        axi_read(address, data);

        op_data(((i+1)*32)-1 downto (i*32)) := data;

        -- next address is 32 further

        address := address + "100";

      end loop;

    end readOp;

    procedure loadFifo(variable data : std_logic_vector(31 downto 0)) is

      variable address : std_logic_vector(31 downto 0);

    begin

      -- set the start address

      address := C_BASEADDR(0 to 15) & '0' & fifo & "0000" & "000000" & "00";

      axi_write(address, data);

    end loadFifo;

    function ToString(constant Timeval : time) return string is

      variable StrPtr : line;

    begin

      write(StrPtr,Timeval);

      return StrPtr.all;

    end ToString;

    variable base_width : integer;

    variable exponent_width : integer;

    variable g0 : std_logic_vector(2047 downto 0) := (others=>'0');

    variable g1 : std_logic_vector(2047 downto 0) := (others=>'0');

    variable e0 : std_logic_vector(2047 downto 0) := (others=>'0');

    variable e1 : std_logic_vector(2047 downto 0) := (others=>'0');

    variable m : std_logic_vector(2047 downto 0) := (others=>'0');

    variable R2 : std_logic_vector(2047 downto 0) := (others=>'0');

    variable R : std_logic_vector(2047 downto 0) := (others=>'0');

    variable gt0 : std_logic_vector(2047 downto 0) := (others=>'0');

    variable gt1 : std_logic_vector(2047 downto 0) := (others=>'0');

    variable gt01 : std_logic_vector(2047 downto 0) := (others=>'0');

    variable one : std_logic_vector(2047 downto 0) := std_logic_vector(conv_unsigned(1, 2048));

    variable result : std_logic_vector(2047 downto 0) := (others=>'0');

    variable data_read : std_logic_vector(2047 downto 0) := (others=>'0');

    variable good_value : boolean;

    variable param_count : integer := 0;

    variable temp_data : std_logic_vector(31 downto 0);

    variable timer : time;

  begin

    write(Lw, string'("----------------------------------------------"));

    writeline(output, Lw);

    write(Lw, string'("--            AXI BUS SIMULATION            --"));

    writeline(output, Lw);

    write(Lw, string'("----------------------------------------------"));

    writeline(output, Lw);

    -- axi bus initialisation

    S_AXI_AWADDR <= (others=>'0');

    S_AXI_AWVALID <= '0';

    S_AXI_WDATA <= (others=>'0');

    S_AXI_WVALID <= '0';

    S_AXI_WSTRB <= (others=>'0');

    S_AXI_BREADY <= '0';

    S_AXI_ARADDR <= (others=>'0');

    S_AXI_ARVALID <= '0';

    S_AXI_RREADY <= '0';

    -- control signals initialisation

    core_start <= '0';

    core_exp_m <= '0';

    core_x_sel_single <= "00";

    core_y_sel_single <= "01";

    core_dest_op_single <= "01";

    core_p_sel <= "11";

    core_modulus_sel <= '0';

    -- reset

    S_AXI_ARESETN <= '0';

    waitclk(10);

    S_AXI_ARESETN <= '1';

    waitclk(20);

    while not endfile(input) loop

      readline(input, L); -- read next line

      next when L(1)='-'; -- skip comment lines

      -- read input values

      case param_count is

        when 0 => -- base width

          read(L, base_width, good_value);

          assert good_value report "Can not read base width" severity failure;

          assert false report "Simulating exponentiation" severity note;

          write(Lw, string'("----------------------------------------------"));

          writeline(output, Lw);

          write(Lw, string'("--              EXPONENTIATION              --"));

          writeline(output, Lw);

          write(Lw, string'("----------------------------------------------"));

          writeline(output, Lw);

          write(Lw, string'("----- Variables used:"));

          writeline(output, Lw);

          write(Lw, string'("base width: "));

          write(Lw, base_width);

          writeline(output, Lw);

          case (base_width) is

            when C_NR_BITS_TOTAL => when NR_BITS_HIGH => when NR_BITS_LOW =>

            when others =>

              write(Lw, string'("=> incompatible base width!!!")); writeline(output, Lw);

              assert false report "incompatible base width!!!" severity failure;

          end case;

        when 1 => -- exponent width

          read(L, exponent_width, good_value);

          assert good_value report "Can not read exponent width" severity failure;

          write(Lw, string'("exponent width: "));

          write(Lw, exponent_width);

          writeline(output, Lw);

        when 2 => -- g0

          hread(L, g0(base_width-1 downto 0), good_value);

          assert good_value report "Can not read g0! (wrong lenght?)" severity failure;

          write(Lw, string'("g0: "));

          hwrite(Lw, g0(base_width-1 downto 0));

          writeline(output, Lw);

        when 3 => -- g1

          hread(L, g1(base_width-1 downto 0), good_value);

          assert good_value report "Can not read g1! (wrong lenght?)" severity failure;

          write(Lw, string'("g1: "));

          hwrite(Lw, g1(base_width-1 downto 0));

          writeline(output, Lw);

        when 4 => -- e0

          hread(L, e0(exponent_width-1 downto 0), good_value);

          assert good_value report "Can not read e0! (wrong lenght?)" severity failure;

          write(Lw, string'("e0: "));

          hwrite(Lw, e0(exponent_width-1 downto 0));

          writeline(output, Lw);

        when 5 => -- e1

          hread(L, e1(exponent_width-1 downto 0), good_value);

          assert good_value report "Can not read e1! (wrong lenght?)" severity failure;

          write(Lw, string'("e1: "));

          hwrite(Lw, e1(exponent_width-1 downto 0));

          writeline(output, Lw);

        when 6 => -- m

          hread(L, m(base_width-1 downto 0), good_value);

          assert good_value report "Can not read m! (wrong lenght?)" severity failure;

          write(Lw, string'("m:  "));

          hwrite(Lw, m(base_width-1 downto 0));

          writeline(output, Lw);

        when 7 => -- R^2

          hread(L, R2(base_width-1 downto 0), good_value);

          assert good_value report "Can not read R2! (wrong lenght?)" severity failure;

          write(Lw, string'("R2: "));

          hwrite(Lw, R2(base_width-1 downto 0));

          writeline(output, Lw);

        when 8 => -- R

          hread(L, R(base_width-1 downto 0), good_value);

          assert good_value report "Can not read R! (wrong lenght?)" severity failure;

        when 9 => -- gt0

          hread(L, gt0(base_width-1 downto 0), good_value);

          assert good_value report "Can not read gt0! (wrong lenght?)" severity failure;

        when 10 => -- gt1

          hread(L, gt1(base_width-1 downto 0), good_value);

          assert good_value report "Can not read gt1! (wrong lenght?)" severity failure;

        when 11 => -- gt01

          hread(L, gt01(base_width-1 downto 0), good_value);

          assert good_value report "Can not read gt01! (wrong lenght?)" severity failure;

          -- select pipeline for all computations

          ----------------------------------------

          writeline(output, Lw);

          write(Lw, string'("----- Selecting pipeline: "));

          writeline(output, Lw);

          case (base_width) is

            when C_NR_BITS_TOTAL =>  core_p_sel <= "11"; write(Lw, string'("  Full pipeline selected"));

            when NR_BITS_HIGH =>  core_p_sel <= "10"; write(Lw, string'("  Upper pipeline selected"));

            when NR_BITS_LOW  =>  core_p_sel <= "01"; write(Lw, string'("  Lower pipeline selected"));

            when others =>

              write(Lw, string'("  Invallid bitwidth for design"));

              assert false report "impossible basewidth!" severity failure;

          end case;

          axi_write_control_reg;

          writeline(output, Lw);

          writeline(output, Lw);

          write(Lw, string'("----- Writing operands:"));

          writeline(output, Lw);

          -- load the modulus

          --------------------

          loadOp(op_modulus, m); -- visual check needed

          write(Lw, string'("  m written"));

          writeline(output, Lw);

          -- load g0

          -----------

          loadOp(op_0, g0);

          -- verify

          readOp(op_0, data_read, base_width);

          if (g0(base_width-1 downto 0) = data_read(base_width-1 downto 0)) then

            write(Lw, string'("  g0 written in operand_0")); writeline(output, Lw);

          else

            write(Lw, string'("  failed to write g0 to operand_0!")); writeline(output, Lw);

            assert false report "Load g0 to op0 data verify failed!!" severity failure;

          end if;

          -- load g1

          -----------

          loadOp(op_1, g1);

          -- verify

          readOp(op_1, data_read, base_width);

          if (g1(base_width-1 downto 0) = data_read(base_width-1 downto 0)) then

            write(Lw, string'("  g1 written in operand_1")); writeline(output, Lw);

          else

            write(Lw, string'("  failed to write g1 to operand_1!")); writeline(output, Lw);

            assert false report "Load g1 to op1 data verify failed!!" severity failure;

          end if;

          -- load R2

          -----------

          loadOp(op_2, R2);

          -- verify

          readOp(op_2, data_read, base_width);

          if (R2(base_width-1 downto 0) = data_read(base_width-1 downto 0)) then

            write(Lw, string'("  R^2 written in operand_2")); writeline(output, Lw);

          else

            write(Lw, string'("  failed to write R^2 to operand_2!")); writeline(output, Lw);

            assert false report "Load R2 to op2 data verify failed!!" severity failure;

          end if;

          -- load a=1

          ------------

          loadOp(op_3, one);

          -- verify

          readOp(op_3, data_read, base_width);

          if (one(base_width-1 downto 0) = data_read(base_width-1 downto 0)) then

            write(Lw, string'("  1 written in operand_3")); writeline(output, Lw);

          else

            write(Lw, string'("  failed to write 1 to operand_3!")); writeline(output, Lw);

            assert false report "Load 1 to op3 data verify failed!!" severity failure;

          end if;

          writeline(output, Lw);

          write(Lw, string'("----- Pre-computations: "));

          writeline(output, Lw);

          -- compute gt0

          ---------------

          core_x_sel_single <= "00"; -- g0

          core_y_sel_single <= "10"; -- R^2

          core_dest_op_single <= "00"; -- op_0 = (g0 * R) mod m

          axi_write_control_reg;

          timer := NOW;

          core_start <= '1';

          axi_write_control_reg;

          core_start <= '0';

          axi_write_control_reg;

          wait until IntrEvent = '1';

          timer := NOW-timer;

          waitclk(10);