| 1 |
9 |
pradd |
-------------------------------------------------------------------------------------------------
|
| 2 |
|
|
-------------------------------------------------------------------------------------------------
|
| 3 |
|
|
-- Title : ONFI compliant NAND interface
|
| 4 |
|
|
-- File : onfi_package.vhd
|
| 5 |
|
|
-- Author : Alexey Lyashko <pradd@opencores.org>
|
| 6 |
|
|
-- License : LGPL
|
| 7 |
|
|
-------------------------------------------------------------------------------------------------
|
| 8 |
|
|
-- Description:
|
| 9 |
|
|
-- This file contains clock cycle duration definition, delay timing constants as well as
|
| 10 |
|
|
-- definition of FSM states and types used in the module.
|
| 11 |
|
|
-------------------------------------------------------------------------------------------------
|
| 12 |
|
|
-------------------------------------------------------------------------------------------------
|
| 13 |
|
|
|
| 14 |
|
|
library ieee;
|
| 15 |
|
|
use ieee.std_logic_1164.all;
|
| 16 |
|
|
|
| 17 |
|
|
package onfi is
|
| 18 |
|
|
-- Clock cycle length in ns
|
| 19 |
|
|
-- IMPORTANT!!! The 'clock_cycle' is configured for 400MHz, change it appropriately!
|
| 20 |
|
|
constant clock_cycle : real := 2.5;
|
| 21 |
|
|
|
| 22 |
|
|
-- NAND interface delays.
|
| 23 |
|
|
-- Delays of 7.5ns may need to be fixed to 7.0.
|
| 24 |
|
|
constant t_cls : integer := integer(10.0 / clock_cycle);
|
| 25 |
|
|
constant t_clh : integer := integer(5.0 / clock_cycle);
|
| 26 |
|
|
constant t_wp : integer := integer(10.0 / clock_cycle);
|
| 27 |
|
|
constant t_wh : integer := integer(7.5 / clock_cycle);
|
| 28 |
|
|
constant t_wc : integer := integer(20.0 / clock_cycle);
|
| 29 |
|
|
constant t_ds : integer := integer(7.5 / clock_cycle);
|
| 30 |
|
|
constant t_dh : integer := integer(5.0 / clock_cycle);
|
| 31 |
|
|
constant t_als : integer := integer(10.0 / clock_cycle);
|
| 32 |
|
|
constant t_alh : integer := integer(5.0 / clock_cycle);
|
| 33 |
|
|
constant t_rr : integer := integer(20.0 / clock_cycle);
|
| 34 |
|
|
constant t_rea : integer := integer(16.0 / clock_cycle);
|
| 35 |
|
|
constant t_rp : integer := integer(10.0 / clock_cycle);
|
| 36 |
|
|
constant t_reh : integer := integer(7.5 / clock_cycle);
|
| 37 |
|
|
constant t_wb : integer := integer(100.0 / clock_cycle);
|
| 38 |
|
|
constant t_rst : integer := integer(5000.0 / clock_cycle);
|
| 39 |
|
|
constant t_bers : integer := integer(700000.0 / clock_cycle);
|
| 40 |
|
|
constant t_whr : integer := integer(80.0 / clock_cycle);
|
| 41 |
|
|
constant t_prog : integer := integer(600000000.0 / clock_cycle);
|
| 42 |
|
|
constant t_adl : integer := integer(70.0 / clock_cycle);
|
| 43 |
|
|
|
| 44 |
|
|
type latch_t is (LATCH_CMD, LATCH_ADDR);
|
| 45 |
|
|
type io_t is (IO_READ, IO_WRITE);
|
| 46 |
|
|
|
| 47 |
|
|
type master_state_t is
|
| 48 |
|
|
(
|
| 49 |
|
|
M_IDLE, -- NAND Master is in idle state - awaits commands.
|
| 50 |
|
|
M_RESET, -- NAND Master is being reset.
|
| 51 |
|
|
M_WAIT, -- NAND Master waits for current operation to complete.
|
| 52 |
|
|
M_DELAY, -- Execute timed delay.
|
| 53 |
|
|
M_NAND_RESET, -- NAND Master executes NAND 'reset' command.
|
| 54 |
|
|
M_NAND_READ_PARAM_PAGE, -- Read ONFI parameter page.
|
| 55 |
|
|
M_NAND_READ_ID, -- Read the JEDEC ID of the chip.
|
| 56 |
|
|
M_NAND_BLOCK_ERASE, -- Erase block specified by address in current_address.
|
| 57 |
|
|
M_NAND_READ_STATUS, -- Read status byte.
|
| 58 |
|
|
M_NAND_READ, -- Reads page into the buffer.
|
| 59 |
|
|
M_NAND_READ_8,
|
| 60 |
|
|
M_NAND_READ_16,
|
| 61 |
|
|
M_NAND_PAGE_PROGRAM, -- Program one page.
|
| 62 |
|
|
-- interface commands
|
| 63 |
|
|
MI_GET_STATUS, -- Returns the status byte.
|
| 64 |
|
|
MI_CHIP_ENABLE, -- Sets CE# to 0.
|
| 65 |
|
|
MI_CHIP_DISABLE, -- Sets CE# to 1.
|
| 66 |
|
|
MI_WRITE_PROTECT, -- Sets WP# to 0.
|
| 67 |
|
|
MI_WRITE_ENABLE, -- Sets WP# to 1.
|
| 68 |
|
|
MI_RESET_INDEX, -- Resets page_idx (used as indes into arrays) to 0.
|
| 69 |
|
|
-- The following states depend on 'page_idx' pointer. If its value goes beyond the limits
|
| 70 |
|
|
-- of the array, it is then reset to 0.
|
| 71 |
|
|
MI_GET_ID_BYTE, -- Gets chip_id(page_idx) byte.
|
| 72 |
|
|
MI_GET_PARAM_PAGE_BYTE, -- Gets page_param(page_idx) byte.
|
| 73 |
|
|
MI_GET_DATA_PAGE_BYTE, -- Gets page_data(page_idx) byte.
|
| 74 |
|
|
MI_SET_DATA_PAGE_BYTE, -- Sets value at page_data(page_idx).
|
| 75 |
|
|
MI_GET_CURRENT_ADDRESS_BYTE, -- Gets current_address(page_idx) byte.
|
| 76 |
|
|
MI_SET_CURRENT_ADDRESS_BYTE -- Sets value at current_address(page_idx).
|
| 77 |
|
|
);
|
| 78 |
|
|
|
| 79 |
|
|
type master_substate_t is
|
| 80 |
|
|
(
|
| 81 |
|
|
MS_BEGIN,
|
| 82 |
|
|
MS_SUBMIT_COMMAND,
|
| 83 |
|
|
MS_SUBMIT_COMMAND1,
|
| 84 |
|
|
MS_SUBMIT_ADDRESS,
|
| 85 |
|
|
MS_WRITE_DATA0,
|
| 86 |
|
|
MS_WRITE_DATA1,
|
| 87 |
|
|
MS_WRITE_DATA2,
|
| 88 |
|
|
MS_WRITE_DATA3,
|
| 89 |
|
|
MS_READ_DATA0,
|
| 90 |
|
|
MS_READ_DATA1,
|
| 91 |
|
|
MS_READ_DATA2,
|
| 92 |
|
|
MS_DELAY,
|
| 93 |
|
|
MS_WAIT,
|
| 94 |
|
|
MS_END
|
| 95 |
|
|
);
|
| 96 |
|
|
|
| 97 |
|
|
type page_t is array (0 to 8628) of std_logic_vector(7 downto 0);
|
| 98 |
|
|
type param_page_t is array (0 to 255) of std_logic_vector(7 downto 0);
|
| 99 |
|
|
type nand_id_t is array (0 to 4) of std_logic_vector(7 downto 0);
|
| 100 |
|
|
type nand_address_t is array (0 to 4) of std_logic_vector(7 downto 0);
|
| 101 |
|
|
type states_t is array (0 to 255) of master_state_t;
|
| 102 |
|
|
|
| 103 |
|
|
constant max_page_idx : integer := 8626;
|
| 104 |
|
|
end onfi;
|
