Subversion Repositories neorv32

Let's Get It Started!

This user guide uses the NEORV32 project _as is_ from the official `neorv32` repository.

To make your first NEORV32 project run, follow the guides from the upcoming sections. It is recommended to

follow these guides step by step and eventually in the presented order.

[TIP]

This guide uses the minimalistic and platform/toolchain agnostic SoC test setups from

`rtl/test_setups` for illustration. You can use one of the provided test setups for

your first FPGA tests. Alternatively, have a look at the `setups` folder,

which provides more sophisticated example setups for various FPGAs/FPGA boards and toolchains.

include::sw_toolchain_setup.adoc[]

include::general_hw_setup.adoc[]

include::general_sw_framework_setup.adoc[]

include::application_program_compilation.adoc[]

include::executable_upload.adoc[]

include::installing_an_executable.adoc[]

include::new_application_project.adoc[]

include::enabling_riscv_extensions.adoc[]

include::application_specific_configuration.adoc[]

include::adding_custom_hw_modules.adoc[]

include::customizing_the_bootloader.adoc[]

include::programming_an_external_spi_flash_via_bootloader.adoc[]

include::packaging_vivado.adoc[]

include::simulating_the_processor.adoc[]

include::building_the_documentation.adoc[]

include::zephyr_support.adoc[]

include::free_rtos_support.adoc[]

include::riscv_architecture_tests.adoc[]

include::debugging_with_ocd.adoc[]

include::../legal.adoc[]