Subversion Repositories neorv32

-- #################################################################################################

-- # << NEORV32 - CPU Data Register File >>                                                        #

-- # ********************************************************************************************* #

-- # General purpose data register file. 32 entries for normal mode (I), 16 entries for embedded   #

-- # mode (E) when RISC-V "E" extension is enabled. Register zero (r0) is a "normal" physical reg  #

-- # that has to be initialized to zero by the CPU control system. For normal operations r0 cannot #

-- # be written. The register file uses synchronous reads so it can be mapped to FPGA block RAM.   #

-- # ********************************************************************************************* #

-- # BSD 3-Clause License                                                                          #

-- #                                                                                               #

-- # Copyright (c) 2020, Stephan Nolting. All rights reserved.                                     #

-- #                                                                                               #

-- # Redistribution and use in source and binary forms, with or without modification, are          #

-- # permitted provided that the following conditions are met:                                     #

-- #                                                                                               #

-- # 1. Redistributions of source code must retain the above copyright notice, this list of        #

-- #    conditions and the following disclaimer.                                                   #

-- #                                                                                               #

-- # 2. Redistributions in binary form must reproduce the above copyright notice, this list of     #

-- #    conditions and the following disclaimer in the documentation and/or other materials        #

-- #    provided with the distribution.                                                            #

-- #                                                                                               #

-- # 3. Neither the name of the copyright holder nor the names of its contributors may be used to  #

-- #    endorse or promote products derived from this software without specific prior written      #

-- #    permission.                                                                                #

-- #                                                                                               #

-- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS   #

-- # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF               #

-- # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE    #

-- # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,     #

-- # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #

-- # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED    #

-- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING     #

-- # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED  #

-- # OF THE POSSIBILITY OF SUCH DAMAGE.                                                            #

-- # ********************************************************************************************* #

-- # The NEORV32 Processor - https://github.com/stnolting/neorv32              (c) Stephan Nolting #

-- #################################################################################################

library ieee;

use ieee.std_logic_1164.all;

use ieee.numeric_std.all;

library neorv32;

use neorv32.neorv32_package.all;

entity neorv32_cpu_regfile is

  generic (

    CPU_EXTENSION_RISCV_E : boolean := false -- implement embedded RF extension?

  );

  port (

    -- global control --

    clk_i  : in  std_ulogic; -- global clock, rising edge

    ctrl_i : in  std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus

    -- data input --

    mem_i  : in  std_ulogic_vector(data_width_c-1 downto 0); -- memory read data

    alu_i  : in  std_ulogic_vector(data_width_c-1 downto 0); -- ALU result

    csr_i  : in  std_ulogic_vector(data_width_c-1 downto 0); -- CSR read data

    -- data output --

    rs1_o  : out std_ulogic_vector(data_width_c-1 downto 0); -- operand 1

    rs2_o  : out std_ulogic_vector(data_width_c-1 downto 0)  -- operand 2

  );

end neorv32_cpu_regfile;

architecture neorv32_cpu_regfile_rtl of neorv32_cpu_regfile is

  -- register file --

  type   reg_file_t is array (31 downto 0) of std_ulogic_vector(data_width_c-1 downto 0);

  type   reg_file_emb_t is array (15 downto 0) of std_ulogic_vector(data_width_c-1 downto 0);

  signal reg_file      : reg_file_t;

  signal reg_file_emb  : reg_file_emb_t;

  signal rf_mux_data   : std_ulogic_vector(data_width_c-1 downto 0);

  signal rf_write_data : std_ulogic_vector(data_width_c-1 downto 0); -- actual write-back data

  signal rd_is_r0      : std_ulogic; -- writing to r0?

  signal rf_we         : std_ulogic;

  signal dst_addr      : std_ulogic_vector(4 downto 0); -- destination address

begin

  -- Register file read/write access --------------------------------------------------------

  -- -------------------------------------------------------------------------------------------

  rf_access: process(clk_i)

  begin

    if rising_edge(clk_i) then -- sync read and write

      if (CPU_EXTENSION_RISCV_E = false) then -- normal register file with 32 entries

        if (rf_we = '1') then

          reg_file(to_integer(unsigned(dst_addr(4 downto 0)))) <= rf_write_data;

        else

          rs1_o <= reg_file(to_integer(unsigned(ctrl_i(ctrl_rf_rs1_adr4_c downto ctrl_rf_rs1_adr0_c))));

          rs2_o <= reg_file(to_integer(unsigned(ctrl_i(ctrl_rf_rs2_adr4_c downto ctrl_rf_rs2_adr0_c))));

        end if;

      else -- embedded register file with 16 entries

        if (rf_we = '1') then

          reg_file_emb(to_integer(unsigned(dst_addr(3 downto 0)))) <= rf_write_data;

        else

          rs1_o <= reg_file_emb(to_integer(unsigned(ctrl_i(ctrl_rf_rs1_adr3_c downto ctrl_rf_rs1_adr0_c))));

          rs2_o <= reg_file_emb(to_integer(unsigned(ctrl_i(ctrl_rf_rs2_adr3_c downto ctrl_rf_rs2_adr0_c))));

        end if;

      end if;

    end if;

  end process rf_access;

  -- data input mux --

  rf_write_data <= alu_i when (ctrl_i(ctrl_rf_in_mux_msb_c) = '0') else rf_mux_data;

  rf_mux_data   <= mem_i when (ctrl_i(ctrl_rf_in_mux_lsb_c) = '0') else csr_i;

  -- check if we are writing to x0 --

  rd_is_r0 <= not or_all_f(ctrl_i(ctrl_rf_rd_adr4_c downto ctrl_rf_rd_adr0_c)) when (CPU_EXTENSION_RISCV_E = false) else

              not or_all_f(ctrl_i(ctrl_rf_rd_adr3_c downto ctrl_rf_rd_adr0_c));

  -- valid RF write access --

  rf_we <= (ctrl_i(ctrl_rf_wb_en_c) and (not rd_is_r0)) or ctrl_i(ctrl_rf_r0_we_c);

  -- destination address --

  dst_addr <= ctrl_i(ctrl_rf_rd_adr4_c downto ctrl_rf_rd_adr0_c) when (ctrl_i(ctrl_rf_r0_we_c) = '0') else (others => '0'); -- force dst=r0?

end neorv32_cpu_regfile_rtl;