Subversion Repositories neorv32

-- #################################################################################################

-- # << NEORV32 - General Purpose Parallel Input/Output Port (GPIO) >>                             #

-- # ********************************************************************************************* #

-- # 32-bit parallel input & output unit. Any pin change (HI->LO or LO->HI) triggers an IRQ.       #

-- # ********************************************************************************************* #

-- # BSD 3-Clause License                                                                          #

-- #                                                                                               #

-- # Copyright (c) 2020, Stephan Nolting. All rights reserved.                                     #

-- #                                                                                               #

-- # Redistribution and use in source and binary forms, with or without modification, are          #

-- # permitted provided that the following conditions are met:                                     #

-- #                                                                                               #

-- # 1. Redistributions of source code must retain the above copyright notice, this list of        #

-- #    conditions and the following disclaimer.                                                   #

-- #                                                                                               #

-- # 2. Redistributions in binary form must reproduce the above copyright notice, this list of     #

-- #    conditions and the following disclaimer in the documentation and/or other materials        #

-- #    provided with the distribution.                                                            #

-- #                                                                                               #

-- # 3. Neither the name of the copyright holder nor the names of its contributors may be used to  #

-- #    endorse or promote products derived from this software without specific prior written      #

-- #    permission.                                                                                #

-- #                                                                                               #

-- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS   #

-- # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF               #

-- # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE    #

-- # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,     #

-- # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #

-- # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED    #

-- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING     #

-- # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED  #

-- # OF THE POSSIBILITY OF SUCH DAMAGE.                                                            #

-- # ********************************************************************************************* #

-- # The NEORV32 Processor - https://github.com/stnolting/neorv32              (c) Stephan Nolting #

-- #################################################################################################

library ieee;

use ieee.std_logic_1164.all;

use ieee.numeric_std.all;

library neorv32;

use neorv32.neorv32_package.all;

entity neorv32_gpio is

  port (

    -- host access --

    clk_i  : in  std_ulogic; -- global clock line

    addr_i : in  std_ulogic_vector(31 downto 0); -- address

    rden_i : in  std_ulogic; -- read enable

    wren_i : in  std_ulogic; -- write enable

    data_i : in  std_ulogic_vector(31 downto 0); -- data in

    data_o : out std_ulogic_vector(31 downto 0); -- data out

    ack_o  : out std_ulogic; -- transfer acknowledge

    -- parallel io --

    gpio_o : out std_ulogic_vector(31 downto 0);

    gpio_i : in  std_ulogic_vector(31 downto 0);

    -- interrupt --

    irq_o  : out std_ulogic

  );

end neorv32_gpio;

architecture neorv32_gpio_rtl of neorv32_gpio is

  -- IO space: module base address --

  constant hi_abb_c : natural := index_size_f(io_size_c)-1; -- high address boundary bit

  constant lo_abb_c : natural := index_size_f(gpio_size_c); -- low address boundary bit

  -- access control --

  signal acc_en : std_ulogic; -- module access enable

  signal addr   : std_ulogic_vector(31 downto 0); -- access address

  -- accessible regs --

  signal din    : std_ulogic_vector(31 downto 0); -- r/-

  signal dout   : std_ulogic_vector(31 downto 0); -- r/w

  signal irq_en : std_ulogic_vector(31 downto 0); -- -/w, uses the same address as data_in

  -- misc --

  signal in_buf : std_ulogic_vector(31 downto 0);

begin

  -- Access Control -------------------------------------------------------------------------

  -- -------------------------------------------------------------------------------------------

  acc_en <= '1' when (addr_i(hi_abb_c downto lo_abb_c) = gpio_base_c(hi_abb_c downto lo_abb_c)) else '0';

  addr   <= gpio_base_c(31 downto lo_abb_c) & addr_i(lo_abb_c-1 downto 2) & "00"; -- word aligned

  -- Read/Write Access ----------------------------------------------------------------------

  -- -------------------------------------------------------------------------------------------

  rw_access: process(clk_i)

  begin

    if rising_edge(clk_i) then

      ack_o <= acc_en and (rden_i or wren_i);

      -- write access --

      if ((acc_en and wren_i) = '1') then

        if (addr = gpio_in_addr_c) then

          irq_en <= data_i; -- pin change IRQ enable

        else -- gpio_out_addr_c

          dout <= data_i; -- data output port

        end if;

      end if;

      -- read access --

      data_o <= (others => '0');

      if ((acc_en and rden_i) = '1') then

        if (addr = gpio_in_addr_c) then

          data_o <= din; -- data input port

        else -- gpio_out_addr_c

          data_o <= dout; -- data output port

        end if;

      end if;

    end if;

  end process rw_access;

  -- output --

  gpio_o <= dout;

  -- IRQ Detector ------------------------------------------------------------

  -- -----------------------------------------------------------------------------

  irq_detector: process(clk_i)

  begin

    if rising_edge(clk_i) then

      -- input synchronizer --

      in_buf <= gpio_i;

      din    <= in_buf;

      -- IRQ --

      irq_o <= or_all_f((in_buf xor din) and irq_en); -- any enabled pin transition triggers an interrupt

    end if;

  end process irq_detector;

end neorv32_gpio_rtl;