Subversion Repositories neorv32

-- #################################################################################################

-- # << NEORV32 - Pulse Width Modulation Controller (PWM) >>                                       #

-- # ********************************************************************************************* #

-- # Simple 4-channel PWM controller with 8 bit resolution for the duty cycle and programmable     #

-- # clock.                                                                                        #

-- # ********************************************************************************************* #

-- # BSD 3-Clause License                                                                          #

-- #                                                                                               #

-- # Copyright (c) 2020, Stephan Nolting. All rights reserved.                                     #

-- #                                                                                               #

-- # Redistribution and use in source and binary forms, with or without modification, are          #

-- # permitted provided that the following conditions are met:                                     #

-- #                                                                                               #

-- # 1. Redistributions of source code must retain the above copyright notice, this list of        #

-- #    conditions and the following disclaimer.                                                   #

-- #                                                                                               #

-- # 2. Redistributions in binary form must reproduce the above copyright notice, this list of     #

-- #    conditions and the following disclaimer in the documentation and/or other materials        #

-- #    provided with the distribution.                                                            #

-- #                                                                                               #

-- # 3. Neither the name of the copyright holder nor the names of its contributors may be used to  #

-- #    endorse or promote products derived from this software without specific prior written      #

-- #    permission.                                                                                #

-- #                                                                                               #

-- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS   #

-- # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF               #

-- # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE    #

-- # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,     #

-- # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #

-- # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED    #

-- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING     #

-- # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED  #

-- # OF THE POSSIBILITY OF SUCH DAMAGE.                                                            #

-- # ********************************************************************************************* #

-- # The NEORV32 Processor - https://github.com/stnolting/neorv32              (c) Stephan Nolting #

-- #################################################################################################

library ieee;

use ieee.std_logic_1164.all;

use ieee.numeric_std.all;

library neorv32;

use neorv32.neorv32_package.all;

entity neorv32_pwm is

  port (

    -- host access --

    clk_i       : in  std_ulogic; -- global clock line

    addr_i      : in  std_ulogic_vector(31 downto 0); -- address

    rden_i      : in  std_ulogic; -- read enable

    wren_i      : in  std_ulogic; -- write enable

    data_i      : in  std_ulogic_vector(31 downto 0); -- data in

    data_o      : out std_ulogic_vector(31 downto 0); -- data out

    ack_o       : out std_ulogic; -- transfer acknowledge

    -- clock generator --

    clkgen_en_o : out std_ulogic; -- enable clock generator

    clkgen_i    : in  std_ulogic_vector(07 downto 0);

    -- pwm output channels --

    pwm_o       : out std_ulogic_vector(03 downto 0)

  );

end neorv32_pwm;

architecture neorv32_pwm_rtl of neorv32_pwm is

  -- internal configuration --

  constant num_pwm_channels_c : natural := 4; -- number of PWM channels, fixed!

  -- IO space: module base address --

  constant hi_abb_c : natural := index_size_f(io_size_c)-1; -- high address boundary bit

  constant lo_abb_c : natural := index_size_f(pwm_size_c); -- low address boundary bit

  -- Control register bits --

  constant ctrl_enable_c    : natural := 0; -- r/w: PWM enable

  constant ctrl_prsc0_bit_c : natural := 1; -- r/w: prescaler select bit 0

  constant ctrl_prsc1_bit_c : natural := 2; -- r/w: prescaler select bit 1

  constant ctrl_prsc2_bit_c : natural := 3; -- r/w: prescaler select bit 2

  -- access control --

  signal acc_en : std_ulogic; -- module access enable

  signal addr   : std_ulogic_vector(31 downto 0); -- access address

  signal wren   : std_ulogic; -- write enable

  signal rden   : std_ulogic; -- read enable

  -- accessible regs --

  type pwm_ch_t is array (0 to num_pwm_channels_c-1) of std_ulogic_vector(7 downto 0);

  signal pwm_ch : pwm_ch_t; -- duty cycle (r/w)

  signal enable : std_ulogic; -- enable unit (r/w)

  signal prsc   : std_ulogic_vector(2 downto 0); -- clock prescaler (r/w)

  -- prescaler clock generator --

  signal prsc_tick : std_ulogic;

  -- pwm core counter --

  signal pwm_cnt : std_ulogic_vector(7 downto 0);

begin

  -- Access Control -------------------------------------------------------------------------

  -- -------------------------------------------------------------------------------------------

  acc_en <= '1' when (addr_i(hi_abb_c downto lo_abb_c) = pwm_base_c(hi_abb_c downto lo_abb_c)) else '0';

  addr   <= pwm_base_c(31 downto lo_abb_c) & addr_i(lo_abb_c-1 downto 2) & "00"; -- word aligned

  rden   <= acc_en and rden_i;

  wren   <= acc_en and wren_i;

  -- Write access ---------------------------------------------------------------------------

  -- -------------------------------------------------------------------------------------------

  wr_access: process(clk_i)

  begin

    if rising_edge(clk_i) then

      ack_o <= acc_en and (rden_i or wren_i);

      -- write access --

      if (wren = '1') then

        if (addr = pwm_ctrl_addr_c) then -- control register

          enable <= data_i(ctrl_enable_c);

          prsc   <= data_i(ctrl_prsc2_bit_c downto ctrl_prsc0_bit_c);

        end if;

        if (addr = pwm_duty_addr_c) then -- duty cycle register

          for i in 0 to 3 loop

            pwm_ch(i) <= data_i(7+i*8 downto 0+i*8);

          end loop;

        end if;

      end if;

      -- read access --

      data_o <= (others => '0');

      if (rden = '1') then

        if (addr = pwm_ctrl_addr_c) then

          data_o(ctrl_enable_c) <= enable;

          data_o(ctrl_prsc2_bit_c downto ctrl_prsc0_bit_c) <= prsc;

        else -- pwm_duty_addr_c

          data_o(07 downto 00) <= pwm_ch(0);

          data_o(15 downto 08) <= pwm_ch(1);

          data_o(23 downto 16) <= pwm_ch(2);

          data_o(31 downto 24) <= pwm_ch(3);

        end if;

      end if;

    end if;

  end process wr_access;

  -- PWM clock select --

  clkgen_en_o <= enable; -- enable clock generator

  prsc_tick   <= clkgen_i(to_integer(unsigned(prsc)));

  -- PWM Core -------------------------------------------------------------------------------

  -- -------------------------------------------------------------------------------------------

  pwm_core: process(clk_i)

  begin

    if rising_edge(clk_i) then

      -- pwm counter --

      if (enable = '0') then

        pwm_cnt <= (others => '0');

      elsif (prsc_tick = '1') then

        pwm_cnt <= std_ulogic_vector(unsigned(pwm_cnt) + 1);

      end if;

      -- channels --

      for i in 0 to num_pwm_channels_c-1 loop

        if (unsigned(pwm_cnt) >= unsigned(pwm_ch(i))) or (enable = '0') then

          pwm_o(i) <= '0';

        else

          pwm_o(i) <= '1';

        end if;

      end loop; -- i, pwm channel

    end if;

  end process pwm_core;

end neorv32_pwm_rtl;