1 |
63 |
zero_gravi |
-- #################################################################################################
|
2 |
|
|
-- # << NEORV32 - Minimal setup without a bootloader >> #
|
3 |
|
|
-- # ********************************************************************************************* #
|
4 |
|
|
-- # BSD 3-Clause License #
|
5 |
|
|
-- # #
|
6 |
|
|
-- # Copyright (c) 2021, Stephan Nolting. All rights reserved. #
|
7 |
|
|
-- # #
|
8 |
|
|
-- # Redistribution and use in source and binary forms, with or without modification, are #
|
9 |
|
|
-- # permitted provided that the following conditions are met: #
|
10 |
|
|
-- # #
|
11 |
|
|
-- # 1. Redistributions of source code must retain the above copyright notice, this list of #
|
12 |
|
|
-- # conditions and the following disclaimer. #
|
13 |
|
|
-- # #
|
14 |
|
|
-- # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
|
15 |
|
|
-- # conditions and the following disclaimer in the documentation and/or other materials #
|
16 |
|
|
-- # provided with the distribution. #
|
17 |
|
|
-- # #
|
18 |
|
|
-- # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
|
19 |
|
|
-- # endorse or promote products derived from this software without specific prior written #
|
20 |
|
|
-- # permission. #
|
21 |
|
|
-- # #
|
22 |
|
|
-- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
|
23 |
|
|
-- # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
|
24 |
|
|
-- # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
|
25 |
|
|
-- # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
|
26 |
|
|
-- # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
|
27 |
|
|
-- # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
|
28 |
|
|
-- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
|
29 |
|
|
-- # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
|
30 |
|
|
-- # OF THE POSSIBILITY OF SUCH DAMAGE. #
|
31 |
|
|
-- # ********************************************************************************************* #
|
32 |
|
|
-- # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
|
33 |
|
|
-- #################################################################################################
|
34 |
|
|
|
35 |
|
|
library ieee;
|
36 |
|
|
use ieee.std_logic_1164.all;
|
37 |
|
|
use ieee.numeric_std.all;
|
38 |
|
|
|
39 |
|
|
library neorv32;
|
40 |
|
|
|
41 |
|
|
entity neorv32_ProcessorTop_Minimal is
|
42 |
|
|
generic (
|
43 |
|
|
CLOCK_FREQUENCY : natural := 0; -- clock frequency of clk_i in Hz
|
44 |
|
|
HW_THREAD_ID : natural := 0; -- hardware thread id (32-bit)
|
45 |
|
|
|
46 |
|
|
-- RISC-V CPU Extensions --
|
47 |
|
|
CPU_EXTENSION_RISCV_A : boolean := false; -- implement atomic extension?
|
48 |
|
|
CPU_EXTENSION_RISCV_C : boolean := false; -- implement compressed extension?
|
49 |
|
|
CPU_EXTENSION_RISCV_E : boolean := false; -- implement embedded RF extension?
|
50 |
|
|
CPU_EXTENSION_RISCV_M : boolean := false; -- implement mul/div extension?
|
51 |
|
|
CPU_EXTENSION_RISCV_U : boolean := false; -- implement user mode extension?
|
52 |
|
|
CPU_EXTENSION_RISCV_Zfinx : boolean := false; -- implement 32-bit floating-point extension (using INT regs!)
|
53 |
|
|
CPU_EXTENSION_RISCV_Zicsr : boolean := true; -- implement CSR system?
|
54 |
|
|
CPU_EXTENSION_RISCV_Zifencei : boolean := false; -- implement instruction stream sync.?
|
55 |
|
|
|
56 |
|
|
-- Extension Options --
|
57 |
|
|
FAST_MUL_EN : boolean := false; -- use DSPs for M extension's multiplier
|
58 |
|
|
FAST_SHIFT_EN : boolean := false; -- use barrel shifter for shift operations
|
59 |
|
|
CPU_CNT_WIDTH : natural := 34; -- total width of CPU cycle and instret counters (0..64)
|
60 |
|
|
|
61 |
|
|
-- Physical Memory Protection (PMP) --
|
62 |
|
|
PMP_NUM_REGIONS : natural := 0; -- number of regions (0..64)
|
63 |
|
|
PMP_MIN_GRANULARITY : natural := 8*1024; -- minimal region granularity in bytes, has to be a power of 2, min 8 bytes
|
64 |
|
|
|
65 |
|
|
-- Hardware Performance Monitors (HPM) --
|
66 |
|
|
HPM_NUM_CNTS : natural := 0; -- number of implemented HPM counters (0..29)
|
67 |
|
|
HPM_CNT_WIDTH : natural := 40; -- total size of HPM counters (0..64)
|
68 |
|
|
|
69 |
|
|
-- Internal Instruction memory --
|
70 |
|
|
MEM_INT_IMEM_EN : boolean := true; -- implement processor-internal instruction memory
|
71 |
|
|
MEM_INT_IMEM_SIZE : natural := 8*1024; -- size of processor-internal instruction memory in bytes
|
72 |
|
|
|
73 |
|
|
-- Internal Data memory --
|
74 |
|
|
MEM_INT_DMEM_EN : boolean := true; -- implement processor-internal data memory
|
75 |
|
|
MEM_INT_DMEM_SIZE : natural := 64*1024; -- size of processor-internal data memory in bytes
|
76 |
|
|
|
77 |
|
|
-- Internal Cache memory --
|
78 |
|
|
ICACHE_EN : boolean := false; -- implement instruction cache
|
79 |
|
|
ICACHE_NUM_BLOCKS : natural := 4; -- i-cache: number of blocks (min 1), has to be a power of 2
|
80 |
|
|
ICACHE_BLOCK_SIZE : natural := 64; -- i-cache: block size in bytes (min 4), has to be a power of 2
|
81 |
|
|
ICACHE_ASSOCIATIVITY : natural := 1; -- i-cache: associativity / number of sets (1=direct_mapped), has to be a power of 2
|
82 |
|
|
|
83 |
|
|
-- Processor peripherals --
|
84 |
|
|
IO_MTIME_EN : boolean := false; -- implement machine system timer (MTIME)?
|
85 |
|
|
IO_PWM_NUM_CH : natural := 3; -- number of PWM channels to implement (0..60); 0 = disabled
|
86 |
|
|
IO_WDT_EN : boolean := false -- implement watch dog timer (WDT)?
|
87 |
|
|
);
|
88 |
|
|
port (
|
89 |
|
|
clk_i : in std_logic;
|
90 |
|
|
rstn_i : in std_logic;
|
91 |
|
|
|
92 |
|
|
-- PWM (available if IO_PWM_NUM_CH > 0) --
|
93 |
|
|
pwm_o : out std_ulogic_vector(IO_PWM_NUM_CH-1 downto 0)
|
94 |
|
|
);
|
95 |
|
|
end entity;
|
96 |
|
|
|
97 |
|
|
architecture neorv32_ProcessorTop_Minimal_rtl of neorv32_ProcessorTop_Minimal is
|
98 |
|
|
|
99 |
|
|
begin
|
100 |
|
|
|
101 |
|
|
-- The core of the problem ----------------------------------------------------------------
|
102 |
|
|
-- -------------------------------------------------------------------------------------------
|
103 |
|
|
neorv32_inst: entity neorv32.neorv32_top
|
104 |
|
|
generic map (
|
105 |
|
|
-- General --
|
106 |
|
|
CLOCK_FREQUENCY => CLOCK_FREQUENCY, -- clock frequency of clk_i in Hz
|
107 |
|
|
INT_BOOTLOADER_EN => false, -- boot configuration: true = boot explicit bootloader; false = boot from int/ext (I)MEM
|
108 |
|
|
HW_THREAD_ID => HW_THREAD_ID, -- hardware thread id (32-bit)
|
109 |
|
|
|
110 |
|
|
-- On-Chip Debugger (OCD) --
|
111 |
|
|
ON_CHIP_DEBUGGER_EN => false, -- implement on-chip debugger?
|
112 |
|
|
|
113 |
|
|
-- RISC-V CPU Extensions --
|
114 |
|
|
CPU_EXTENSION_RISCV_A => CPU_EXTENSION_RISCV_A, -- implement atomic extension?
|
115 |
|
|
CPU_EXTENSION_RISCV_C => CPU_EXTENSION_RISCV_C, -- implement compressed extension?
|
116 |
|
|
CPU_EXTENSION_RISCV_E => CPU_EXTENSION_RISCV_E, -- implement embedded RF extension?
|
117 |
|
|
CPU_EXTENSION_RISCV_M => CPU_EXTENSION_RISCV_M, -- implement mul/div extension?
|
118 |
|
|
CPU_EXTENSION_RISCV_U => CPU_EXTENSION_RISCV_U, -- implement user mode extension?
|
119 |
|
|
CPU_EXTENSION_RISCV_Zfinx => CPU_EXTENSION_RISCV_Zfinx, -- implement 32-bit floating-point extension (using INT regs!)
|
120 |
|
|
CPU_EXTENSION_RISCV_Zicsr => CPU_EXTENSION_RISCV_Zicsr, -- implement CSR system?
|
121 |
66 |
zero_gravi |
CPU_EXTENSION_RISCV_Zicntr => true, -- implement base counters?
|
122 |
63 |
zero_gravi |
CPU_EXTENSION_RISCV_Zifencei => CPU_EXTENSION_RISCV_Zifencei, -- implement instruction stream sync.?
|
123 |
|
|
|
124 |
|
|
-- Extension Options --
|
125 |
|
|
FAST_MUL_EN => FAST_MUL_EN, -- use DSPs for M extension's multiplier
|
126 |
|
|
FAST_SHIFT_EN => FAST_SHIFT_EN, -- use barrel shifter for shift operations
|
127 |
|
|
CPU_CNT_WIDTH => CPU_CNT_WIDTH, -- total width of CPU cycle and instret counters (0..64)
|
128 |
|
|
|
129 |
|
|
-- Physical Memory Protection (PMP) --
|
130 |
|
|
PMP_NUM_REGIONS => PMP_NUM_REGIONS, -- number of regions (0..64)
|
131 |
|
|
PMP_MIN_GRANULARITY => PMP_MIN_GRANULARITY, -- minimal region granularity in bytes, has to be a power of 2, min 8 bytes
|
132 |
|
|
|
133 |
|
|
-- Hardware Performance Monitors (HPM) --
|
134 |
|
|
HPM_NUM_CNTS => HPM_NUM_CNTS, -- number of implemented HPM counters (0..29)
|
135 |
|
|
HPM_CNT_WIDTH => HPM_CNT_WIDTH, -- total size of HPM counters (1..64)
|
136 |
|
|
|
137 |
|
|
-- Internal Instruction memory --
|
138 |
|
|
MEM_INT_IMEM_EN => MEM_INT_IMEM_EN, -- implement processor-internal instruction memory
|
139 |
|
|
MEM_INT_IMEM_SIZE => MEM_INT_IMEM_SIZE, -- size of processor-internal instruction memory in bytes
|
140 |
|
|
|
141 |
|
|
-- Internal Data memory --
|
142 |
|
|
MEM_INT_DMEM_EN => MEM_INT_DMEM_EN, -- implement processor-internal data memory
|
143 |
|
|
MEM_INT_DMEM_SIZE => MEM_INT_DMEM_SIZE, -- size of processor-internal data memory in bytes
|
144 |
|
|
|
145 |
|
|
-- Internal Cache memory --
|
146 |
|
|
ICACHE_EN => ICACHE_EN, -- implement instruction cache
|
147 |
|
|
ICACHE_NUM_BLOCKS => ICACHE_NUM_BLOCKS, -- i-cache: number of blocks (min 1), has to be a power of 2
|
148 |
|
|
ICACHE_BLOCK_SIZE => ICACHE_BLOCK_SIZE, -- i-cache: block size in bytes (min 4), has to be a power of 2
|
149 |
|
|
ICACHE_ASSOCIATIVITY => ICACHE_ASSOCIATIVITY, -- i-cache: associativity / number of sets (1=direct_mapped), has to be a power of 2
|
150 |
|
|
|
151 |
|
|
-- External memory interface --
|
152 |
|
|
MEM_EXT_EN => false, -- implement external memory bus interface?
|
153 |
|
|
MEM_EXT_TIMEOUT => 0, -- cycles after a pending bus access auto-terminates (0 = disabled)
|
154 |
|
|
|
155 |
|
|
-- Processor peripherals --
|
156 |
|
|
IO_GPIO_EN => false, -- implement general purpose input/output port unit (GPIO)?
|
157 |
|
|
IO_MTIME_EN => IO_MTIME_EN, -- implement machine system timer (MTIME)?
|
158 |
|
|
IO_UART0_EN => false, -- implement primary universal asynchronous receiver/transmitter (UART0)?
|
159 |
|
|
IO_UART1_EN => false, -- implement secondary universal asynchronous receiver/transmitter (UART1)?
|
160 |
|
|
IO_SPI_EN => false, -- implement serial peripheral interface (SPI)?
|
161 |
|
|
IO_TWI_EN => false, -- implement two-wire interface (TWI)?
|
162 |
|
|
IO_PWM_NUM_CH => IO_PWM_NUM_CH, -- number of PWM channels to implement (0..60); 0 = disabled
|
163 |
|
|
IO_WDT_EN => IO_WDT_EN, -- implement watch dog timer (WDT)?
|
164 |
|
|
IO_TRNG_EN => false, -- implement true random number generator (TRNG)?
|
165 |
|
|
IO_CFS_EN => false, -- implement custom functions subsystem (CFS)?
|
166 |
|
|
IO_CFS_CONFIG => x"00000000", -- custom CFS configuration generic
|
167 |
|
|
IO_CFS_IN_SIZE => 32, -- size of CFS input conduit in bits
|
168 |
|
|
IO_CFS_OUT_SIZE => 32, -- size of CFS output conduit in bits
|
169 |
|
|
IO_NEOLED_EN => false -- implement NeoPixel-compatible smart LED interface (NEOLED)?
|
170 |
|
|
)
|
171 |
|
|
port map (
|
172 |
|
|
-- Global control --
|
173 |
|
|
clk_i => clk_i, -- global clock, rising edge
|
174 |
|
|
rstn_i => rstn_i, -- global reset, low-active, async
|
175 |
|
|
|
176 |
|
|
-- JTAG on-chip debugger interface (available if ON_CHIP_DEBUGGER_EN = true) --
|
177 |
|
|
jtag_trst_i => '0', -- low-active TAP reset (optional)
|
178 |
|
|
jtag_tck_i => '0', -- serial clock
|
179 |
|
|
jtag_tdi_i => '0', -- serial data input
|
180 |
|
|
jtag_tdo_o => open, -- serial data output
|
181 |
|
|
jtag_tms_i => '0', -- mode select
|
182 |
|
|
|
183 |
|
|
-- Wishbone bus interface (available if MEM_EXT_EN = true) --
|
184 |
|
|
wb_tag_o => open, -- request tag
|
185 |
|
|
wb_adr_o => open, -- address
|
186 |
|
|
wb_dat_i => (others => '0'), -- read data
|
187 |
|
|
wb_dat_o => open, -- write data
|
188 |
|
|
wb_we_o => open, -- read/write
|
189 |
|
|
wb_sel_o => open, -- byte enable
|
190 |
|
|
wb_stb_o => open, -- strobe
|
191 |
|
|
wb_cyc_o => open, -- valid cycle
|
192 |
|
|
wb_lock_o => open, -- exclusive access request
|
193 |
|
|
wb_ack_i => '0', -- transfer acknowledge
|
194 |
|
|
wb_err_i => '0', -- transfer error
|
195 |
|
|
|
196 |
|
|
-- Advanced memory control signals (available if MEM_EXT_EN = true) --
|
197 |
|
|
fence_o => open, -- indicates an executed FENCE operation
|
198 |
|
|
fencei_o => open, -- indicates an executed FENCEI operation
|
199 |
|
|
|
200 |
|
|
-- GPIO (available if IO_GPIO_EN = true) --
|
201 |
|
|
gpio_o => open, -- parallel output
|
202 |
|
|
gpio_i => (others => '0'), -- parallel input
|
203 |
|
|
|
204 |
|
|
-- primary UART0 (available if IO_UART0_EN = true) --
|
205 |
|
|
uart0_txd_o => open, -- UART0 send data
|
206 |
|
|
uart0_rxd_i => '0', -- UART0 receive data
|
207 |
|
|
uart0_rts_o => open, -- hw flow control: UART0.RX ready to receive ("RTR"), low-active, optional
|
208 |
|
|
uart0_cts_i => '0', -- hw flow control: UART0.TX allowed to transmit, low-active, optional
|
209 |
|
|
|
210 |
|
|
-- secondary UART1 (available if IO_UART1_EN = true) --
|
211 |
|
|
uart1_txd_o => open, -- UART1 send data
|
212 |
|
|
uart1_rxd_i => '0', -- UART1 receive data
|
213 |
|
|
uart1_rts_o => open, -- hw flow control: UART1.RX ready to receive ("RTR"), low-active, optional
|
214 |
|
|
uart1_cts_i => '0', -- hw flow control: UART1.TX allowed to transmit, low-active, optional
|
215 |
|
|
|
216 |
|
|
-- SPI (available if IO_SPI_EN = true) --
|
217 |
|
|
spi_sck_o => open, -- SPI serial clock
|
218 |
|
|
spi_sdo_o => open, -- controller data out, peripheral data in
|
219 |
|
|
spi_sdi_i => '0', -- controller data in, peripheral data out
|
220 |
|
|
spi_csn_o => open, -- SPI CS
|
221 |
|
|
|
222 |
|
|
-- TWI (available if IO_TWI_EN = true) --
|
223 |
|
|
twi_sda_io => open, -- twi serial data line
|
224 |
|
|
twi_scl_io => open, -- twi serial clock line
|
225 |
|
|
|
226 |
|
|
-- PWM (available if IO_PWM_NUM_CH > 0) --
|
227 |
|
|
pwm_o => pwm_o, -- pwm channels
|
228 |
|
|
|
229 |
|
|
-- Custom Functions Subsystem IO --
|
230 |
|
|
cfs_in_i => (others => '0'), -- custom CFS inputs conduit
|
231 |
|
|
cfs_out_o => open, -- custom CFS outputs conduit
|
232 |
|
|
|
233 |
|
|
-- NeoPixel-compatible smart LED interface (available if IO_NEOLED_EN = true) --
|
234 |
|
|
neoled_o => open, -- async serial data line
|
235 |
|
|
|
236 |
|
|
-- System time --
|
237 |
|
|
mtime_i => (others => '0'), -- current system time from ext. MTIME (if IO_MTIME_EN = false)
|
238 |
|
|
mtime_o => open, -- current system time from int. MTIME (if IO_MTIME_EN = true)
|
239 |
|
|
|
240 |
|
|
-- Interrupts --
|
241 |
|
|
mtime_irq_i => '0', -- machine timer interrupt, available if IO_MTIME_EN = false
|
242 |
|
|
msw_irq_i => '0', -- machine software interrupt
|
243 |
|
|
mext_irq_i => '0' -- machine external interrupt
|
244 |
|
|
);
|
245 |
|
|
|
246 |
|
|
end architecture;
|