Subversion Repositories neorv32

// #################################################################################################

// # << NEORV32: neorv32_uart.h - Universal Asynchronous Receiver/Transmitter (UART) HW Driver >>  #

// # ********************************************************************************************* #

// # BSD 3-Clause License                                                                          #

// #                                                                                               #

// # Copyright (c) 2021, Stephan Nolting. All rights reserved.                                     #

// #                                                                                               #

// # Redistribution and use in source and binary forms, with or without modification, are          #

// # permitted provided that the following conditions are met:                                     #

// #                                                                                               #

// # 1. Redistributions of source code must retain the above copyright notice, this list of        #

// #    conditions and the following disclaimer.                                                   #

// #                                                                                               #

// # 2. Redistributions in binary form must reproduce the above copyright notice, this list of     #

// #    conditions and the following disclaimer in the documentation and/or other materials        #

// #    provided with the distribution.                                                            #

// #                                                                                               #

// # 3. Neither the name of the copyright holder nor the names of its contributors may be used to  #

// #    endorse or promote products derived from this software without specific prior written      #

// #    permission.                                                                                #

// #                                                                                               #

// # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS   #

// # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF               #

// # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE    #

// # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,     #

// # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #

// # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED    #

// # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING     #

// # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED  #

// # OF THE POSSIBILITY OF SUCH DAMAGE.                                                            #

// # ********************************************************************************************* #

// # The NEORV32 Processor - https://github.com/stnolting/neorv32              (c) Stephan Nolting #

// #################################################################################################

/**********************************************************************//**

 * @file neorv32_uart.h

 * @author Stephan Nolting

 * @brief Universal asynchronous receiver/transmitter (UART0/UART1) HW driver header file

 *

 * @warning UART0 (primary UART) is used as default user console interface for all NEORV32 software framework/library functions.

 *

 * @note These functions should only be used if the UART0/UART1 unit was synthesized (IO_UART0_EN = true / IO_UART1_EN = true).

 **************************************************************************/

#ifndef neorv32_uart_h

#define neorv32_uart_h

// Libs required by functions

#include <stdarg.h>

// compatibility wrappers (mapping to primary UART -> UART0)

int  neorv32_uart_available(void);

void neorv32_uart_setup(uint32_t baudrate, uint8_t parity, uint8_t flow_con);

void neorv32_uart_disable(void);

void neorv32_uart_enable(void);

void neorv32_uart_putc(char c);

int  neorv32_uart_tx_busy(void);

char neorv32_uart_getc(void);

int  neorv32_uart_char_received(void);

int  neorv32_uart_getc_safe(char *data);

char neorv32_uart_char_received_get(void);

void neorv32_uart_print(const char *s);

void neorv32_uart_printf(const char *format, ...);

int  neorv32_uart_scan(char *buffer, int max_size, int echo);

// prototypes for UART0 (primary UART)

int  neorv32_uart0_available(void);

void neorv32_uart0_setup(uint32_t baudrate, uint8_t parity, uint8_t flow_con);

void neorv32_uart0_disable(void);

void neorv32_uart0_enable(void);

void neorv32_uart0_putc(char c);

int  neorv32_uart0_tx_busy(void);

char neorv32_uart0_getc(void);

int  neorv32_uart0_char_received(void);

int  neorv32_uart0_getc_safe(char *data);

char neorv32_uart0_char_received_get(void);

void neorv32_uart0_print(const char *s);

void neorv32_uart0_printf(const char *format, ...);

int  neorv32_uart0_scan(char *buffer, int max_size, int echo);

// prototypes for UART1 (secondary UART)

int  neorv32_uart1_available(void);

void neorv32_uart1_setup(uint32_t baudrate, uint8_t parity, uint8_t flow_con);

void neorv32_uart1_disable(void);

void neorv32_uart1_enable(void);

void neorv32_uart1_putc(char c);

int  neorv32_uart1_tx_busy(void);

char neorv32_uart1_getc(void);

int  neorv32_uart1_char_received(void);

int  neorv32_uart1_getc_safe(char *data);

char neorv32_uart1_char_received_get(void);

void neorv32_uart1_print(const char *s);

void neorv32_uart1_printf(const char *format, ...);

int  neorv32_uart1_scan(char *buffer, int max_size, int echo);

#endif // neorv32_uart_h