1 |
2 |
zero_gravi |
// #################################################################################################
|
2 |
10 |
zero_gravi |
// # << NEORV32: neorv32_twi.c - Two-Wire Interface Controller (TWI) HW Driver >> #
|
3 |
2 |
zero_gravi |
// # ********************************************************************************************* #
|
4 |
|
|
// # BSD 3-Clause License #
|
5 |
|
|
// # #
|
6 |
|
|
// # Copyright (c) 2020, Stephan Nolting. All rights reserved. #
|
7 |
|
|
// # #
|
8 |
|
|
// # Redistribution and use in source and binary forms, with or without modification, are #
|
9 |
|
|
// # permitted provided that the following conditions are met: #
|
10 |
|
|
// # #
|
11 |
|
|
// # 1. Redistributions of source code must retain the above copyright notice, this list of #
|
12 |
|
|
// # conditions and the following disclaimer. #
|
13 |
|
|
// # #
|
14 |
|
|
// # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
|
15 |
|
|
// # conditions and the following disclaimer in the documentation and/or other materials #
|
16 |
|
|
// # provided with the distribution. #
|
17 |
|
|
// # #
|
18 |
|
|
// # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
|
19 |
|
|
// # endorse or promote products derived from this software without specific prior written #
|
20 |
|
|
// # permission. #
|
21 |
|
|
// # #
|
22 |
|
|
// # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
|
23 |
|
|
// # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
|
24 |
|
|
// # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
|
25 |
|
|
// # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
|
26 |
|
|
// # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
|
27 |
|
|
// # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
|
28 |
|
|
// # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
|
29 |
|
|
// # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
|
30 |
|
|
// # OF THE POSSIBILITY OF SUCH DAMAGE. #
|
31 |
|
|
// # ********************************************************************************************* #
|
32 |
|
|
// # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
|
33 |
|
|
// #################################################################################################
|
34 |
|
|
|
35 |
|
|
|
36 |
|
|
/**********************************************************************//**
|
37 |
|
|
* @file neorv32_twi.c
|
38 |
|
|
* @author Stephan Nolting
|
39 |
10 |
zero_gravi |
* @brief Two-Wire Interface Controller (TWI) HW driver source file.
|
40 |
2 |
zero_gravi |
*
|
41 |
|
|
* @note These functions should only be used if the TWI unit was synthesized (IO_TWI_USE = true).
|
42 |
|
|
**************************************************************************/
|
43 |
|
|
|
44 |
|
|
#include "neorv32.h"
|
45 |
|
|
#include "neorv32_twi.h"
|
46 |
|
|
|
47 |
|
|
|
48 |
|
|
/**********************************************************************//**
|
49 |
|
|
* Check if TWI unit was synthesized.
|
50 |
|
|
*
|
51 |
|
|
* @return 0 if TWI was not synthesized, 1 if TWI is available.
|
52 |
|
|
**************************************************************************/
|
53 |
|
|
int neorv32_twi_available(void) {
|
54 |
|
|
|
55 |
12 |
zero_gravi |
if (SYSINFO_FEATURES & (1 << SYSINFO_FEATURES_IO_TWI)) {
|
56 |
2 |
zero_gravi |
return 1;
|
57 |
|
|
}
|
58 |
|
|
else {
|
59 |
|
|
return 0;
|
60 |
|
|
}
|
61 |
|
|
}
|
62 |
|
|
|
63 |
|
|
|
64 |
|
|
/**********************************************************************//**
|
65 |
|
|
* Enable and configure TWI controller. The TWI control register bits are listed in #NEORV32_TWI_CT_enum.
|
66 |
|
|
*
|
67 |
|
|
* @param[in] prsc Clock prescaler select (0..7). See #NEORV32_CLOCK_PRSC_enum.
|
68 |
|
|
* @param[in] irq_en Enable transfer-done interrupt when 1.
|
69 |
|
|
**************************************************************************/
|
70 |
|
|
void neorv32_twi_setup(uint8_t prsc, uint8_t irq_en) {
|
71 |
|
|
|
72 |
|
|
TWI_CT = 0; // reset
|
73 |
|
|
|
74 |
|
|
uint32_t ct_enable = 1;
|
75 |
|
|
ct_enable = ct_enable << TWI_CT_EN;
|
76 |
|
|
|
77 |
|
|
uint32_t ct_prsc = (uint32_t)(prsc & 0x07);
|
78 |
|
|
ct_prsc = ct_prsc << TWI_CT_PRSC0;
|
79 |
|
|
|
80 |
|
|
uint32_t ct_irq = (uint32_t)(irq_en & 0x01);
|
81 |
|
|
ct_irq = ct_irq << TWI_CT_IRQ_EN;
|
82 |
|
|
|
83 |
|
|
TWI_CT = ct_enable | ct_prsc | ct_irq;
|
84 |
|
|
}
|
85 |
|
|
|
86 |
|
|
|
87 |
|
|
/**********************************************************************//**
|
88 |
|
|
* Disable TWI controller.
|
89 |
|
|
**************************************************************************/
|
90 |
|
|
void neorv32_twi_disable(void) {
|
91 |
|
|
|
92 |
|
|
TWI_CT &= ~((uint32_t)(1 << TWI_CT_IRQ_EN));
|
93 |
|
|
}
|
94 |
|
|
|
95 |
|
|
|
96 |
|
|
/**********************************************************************//**
|
97 |
10 |
zero_gravi |
* Activate sending ACKs by controller (MACK).
|
98 |
2 |
zero_gravi |
**************************************************************************/
|
99 |
|
|
void neorv32_twi_mack_enable(void) {
|
100 |
|
|
|
101 |
|
|
TWI_CT |= ((uint32_t)(1 << TWI_CT_MACK));
|
102 |
|
|
}
|
103 |
|
|
|
104 |
|
|
|
105 |
|
|
/**********************************************************************//**
|
106 |
10 |
zero_gravi |
* Deacivate sending ACKs by controller (MACK).
|
107 |
2 |
zero_gravi |
**************************************************************************/
|
108 |
|
|
void neorv32_twi_mack_disable(void) {
|
109 |
|
|
|
110 |
|
|
TWI_CT &= ~((uint32_t)(1 << TWI_CT_MACK));
|
111 |
|
|
}
|
112 |
|
|
|
113 |
|
|
|
114 |
23 |
zero_gravi |
/**********************************************************************//**
|
115 |
|
|
* Check if TWI is busy.
|
116 |
|
|
*
|
117 |
|
|
* @note This function is blocking.
|
118 |
|
|
*
|
119 |
|
|
* @return 0 if idle, 1 if busy
|
120 |
|
|
**************************************************************************/
|
121 |
|
|
int neorv32_twi_busy(void) {
|
122 |
|
|
|
123 |
|
|
if (TWI_CT & (1 << TWI_CT_BUSY)) {
|
124 |
|
|
return 1;
|
125 |
|
|
}
|
126 |
|
|
return 0;
|
127 |
|
|
}
|
128 |
|
|
|
129 |
|
|
|
130 |
2 |
zero_gravi |
/**********************************************************************//**
|
131 |
|
|
* Generate START condition and send first byte (address including R/W bit).
|
132 |
|
|
*
|
133 |
|
|
* @note Blocking function.
|
134 |
|
|
*
|
135 |
|
|
* @param[in] a Data byte including 7-bit address and R/W-bit (lsb).
|
136 |
|
|
* @return 0: ACK received, 1: NACK received.
|
137 |
|
|
**************************************************************************/
|
138 |
|
|
int neorv32_twi_start_trans(uint8_t a) {
|
139 |
|
|
|
140 |
|
|
neorv32_twi_generate_start(); // generate START condition
|
141 |
|
|
|
142 |
|
|
TWI_DATA = (uint32_t)a; // send address
|
143 |
|
|
while(TWI_CT & (1 << TWI_CT_BUSY)); // wait until idle again
|
144 |
|
|
|
145 |
|
|
// check for ACK/NACK
|
146 |
|
|
if (TWI_CT & (1 << TWI_CT_ACK))
|
147 |
|
|
return 0; // ACK received
|
148 |
|
|
else
|
149 |
|
|
return 1; // NACK received
|
150 |
|
|
}
|
151 |
|
|
|
152 |
|
|
|
153 |
|
|
/**********************************************************************//**
|
154 |
|
|
* Send data byte and also receive data byte (can be read via neorv32_twi_get_data()).
|
155 |
|
|
*
|
156 |
|
|
* @note Blocking function.
|
157 |
|
|
*
|
158 |
|
|
* @param[in] d Data byte to be send.
|
159 |
|
|
* @return 0: ACK received, 1: NACK received.
|
160 |
|
|
**************************************************************************/
|
161 |
|
|
int neorv32_twi_trans(uint8_t d) {
|
162 |
|
|
|
163 |
|
|
TWI_DATA = (uint32_t)d; // send data
|
164 |
|
|
while(TWI_CT & (1 << TWI_CT_BUSY)); // wait until idle again
|
165 |
|
|
|
166 |
|
|
// check for ACK/NACK
|
167 |
|
|
if (TWI_CT & (1 << TWI_CT_ACK))
|
168 |
|
|
return 0; // ACK received
|
169 |
|
|
else
|
170 |
|
|
return 1; // NACK received
|
171 |
|
|
}
|
172 |
|
|
|
173 |
|
|
|
174 |
|
|
/**********************************************************************//**
|
175 |
|
|
* Get received data from last transmission.
|
176 |
|
|
*
|
177 |
|
|
* @return 0: Last received data byte.
|
178 |
|
|
**************************************************************************/
|
179 |
|
|
uint8_t neorv32_twi_get_data(void) {
|
180 |
|
|
|
181 |
|
|
return (uint8_t)TWI_DATA; // get RX data from previous transmission
|
182 |
|
|
}
|
183 |
|
|
|
184 |
|
|
|
185 |
|
|
/**********************************************************************//**
|
186 |
|
|
* Generate STOP condition.
|
187 |
|
|
*
|
188 |
|
|
* @note Blocking function.
|
189 |
|
|
**************************************************************************/
|
190 |
|
|
void neorv32_twi_generate_stop(void) {
|
191 |
|
|
|
192 |
|
|
TWI_CT |= (uint32_t)(1 << TWI_CT_STOP); // generate STOP condition
|
193 |
|
|
while(TWI_CT & (1 << TWI_CT_BUSY)); // wait until idle again
|
194 |
|
|
}
|
195 |
|
|
|
196 |
|
|
|
197 |
|
|
/**********************************************************************//**
|
198 |
|
|
* Generate START condition.
|
199 |
|
|
*
|
200 |
|
|
* @note Blocking function.
|
201 |
|
|
**************************************************************************/
|
202 |
|
|
void neorv32_twi_generate_start(void) {
|
203 |
|
|
|
204 |
|
|
TWI_CT |= (1 << TWI_CT_START); // generate START condition
|
205 |
|
|
while(TWI_CT & (1 << TWI_CT_BUSY)); // wait until idle again
|
206 |
|
|
}
|