OpenCores
URL https://opencores.org/ocsvn/oms8051mini/oms8051mini/trunk

Subversion Repositories oms8051mini

[/] [oms8051mini/] [trunk/] [rtl/] [8051/] [oc8051_tc.v] - Blame information for rev 31

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 2 dinesha 
//////////////////////////////////////////////////////////////////////
2 
////                                                              ////
3 
////  8051 cores timer/counter control                            ////
4 
////                                                              ////
5 
////  This file is part of the 8051 cores project                 ////
6 
////  http://www.opencores.org/cores/oms8051mini/                 ////
7 
////                                                              ////
8 
////  Description                                                 ////
9 
////   timers and counters handling for 8051 core                 ////
10 
////                                                              ////
11 
////  To Do:                                                      ////
12 
////   Nothing                                                    ////
13 
////                                                              ////
14 
////  Author(s):                                                  ////
15 
////      - Simon Teran, simont@opencores.org                     ////
16 
////      - Dinesh Annayya, dinesha@opencores.org                 ////
17 
////                                                              ////
18 
//////////////////////////////////////////////////////////////////////
19 25 dinesha 
////   v0.0 - Dinesh A, 5th Jan 2017
20 
////        1. Active edge of reset changed from High to Low
21 
//////////////////////////////////////////////////////////////////////
22 2 dinesha 
////                                                              ////
23 
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
24 
////                                                              ////
25 
//// This source file may be used and distributed without         ////
26 
//// restriction provided that this copyright statement is not    ////
27 
//// removed from the file and that any derivative work contains  ////
28 
//// the original copyright notice and the associated disclaimer. ////
29 
////                                                              ////
30 
//// This source file is free software; you can redistribute it   ////
31 
//// and/or modify it under the terms of the GNU Lesser General   ////
32 
//// Public License as published by the Free Software Foundation; ////
33 
//// either version 2.1 of the License, or (at your option) any   ////
34 
//// later version.                                               ////
35 
////                                                              ////
36 
//// This source is distributed in the hope that it will be       ////
37 
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
38 
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
39 
//// PURPOSE.  See the GNU Lesser General Public License for more ////
40 
//// details.                                                     ////
41 
////                                                              ////
42 
//// You should have received a copy of the GNU Lesser General    ////
43 
//// Public License along with this source; if not, download it   ////
44 
//// from http://www.opencores.org/lgpl.shtml                     ////
45 
////                                                              ////
46 
//////////////////////////////////////////////////////////////////////
47 
//
48 
// CVS Revision History
49 
//
50 
// $Log: not supported by cvs2svn $
51 
// Revision 1.8  2003/04/10 12:43:19  simont
52 
// defines for pherypherals added
53 
//
54 
// Revision 1.7  2003/04/07 14:58:02  simont
55 
// change sfr's interface.
56 
//
57 
// Revision 1.6  2003/04/04 10:34:13  simont
58 
// change timers to meet timing specifications (add divider with 12)
59 
//
60 
// Revision 1.5  2003/01/13 14:14:41  simont
61 
// replace some modules
62 
//
63 
// Revision 1.4  2002/09/30 17:33:59  simont
64 
// prepared header
65 
//
66 
//
67 
 
68 
`include "top_defines.v"
69 
 
70 
 
71 
 
72 25 dinesha 
module oc8051_tc (clk, resetn,
73 2 dinesha 
            data_in,
74 
            wr_addr,
75 
            wr, wr_bit,
76 
            ie0, ie1,
77 
            tr0, tr1,
78 
            t0, t1,
79 
            tf0, tf1,
80 
            pres_ow,
81 
//registers
82 
            tmod, tl0, th0, tl1, th1);
83 
 
84 
input [7:0]  wr_addr,
85 
             data_in;
86 
input        clk,
87 25 dinesha 
             resetn,
88 2 dinesha 
             wr,
89 
             wr_bit,
90 
             ie0,
91 
             ie1,
92 
             tr0,
93 
             tr1,
94 
             t0,
95 
             t1,
96 
             pres_ow;
97 
output [7:0] tmod,
98 
             tl0,
99 
             th0,
100 
             tl1,
101 
             th1;
102 
output       tf0,
103 
             tf1;
104 
 
105 
 
106 
reg [7:0] tmod, tl0, th0, tl1, th1;
107 
reg tf0, tf1_0, tf1_1, t0_buff, t1_buff;
108 
 
109 
wire tc0_add, tc1_add;
110 
 
111 
assign tc0_add = (tr0 & (!tmod[3] | !ie0) & ((!tmod[2] & pres_ow) | (tmod[2] & !t0 & t0_buff)));
112 
assign tc1_add = (tr1 & (!tmod[7] | !ie1) & ((!tmod[6] & pres_ow) | (tmod[6] & !t1 & t1_buff)));
113 
assign tf1= tf1_0 | tf1_1;
114 
 
115 
//
116 
// read or write from one of the addresses in tmod
117 
//
118 25 dinesha 
always @(posedge clk or negedge resetn)
119 2 dinesha 
begin
120 25 dinesha 
 if (resetn == 1'b0) begin
121 2 dinesha 
   tmod <=#1 `OC8051_RST_TMOD;
122 
 end else if ((wr) & !(wr_bit) & (wr_addr==`OC8051_SFR_TMOD))
123 
    tmod <= #1 data_in;
124 
end
125 
 
126 
//
127 
// TIMER COUNTER 0
128 
//
129 25 dinesha 
always @(posedge clk or negedge resetn)
130 2 dinesha 
begin
131 25 dinesha 
 if (resetn == 1'b0) begin
132 2 dinesha 
   tl0 <=#1 `OC8051_RST_TL0;
133 
   th0 <=#1 `OC8051_RST_TH0;
134 
   tf0 <= #1 1'b0;
135 
   tf1_0 <= #1 1'b0;
136 
 end else if ((wr) & !(wr_bit) & (wr_addr==`OC8051_SFR_TL0)) begin
137 
   tl0 <= #1 data_in;
138 
   tf0 <= #1 1'b0;
139 
   tf1_0 <= #1 1'b0;
140 
 end else if ((wr) & !(wr_bit) & (wr_addr==`OC8051_SFR_TH0)) begin
141 
   th0 <= #1 data_in;
142 
   tf0 <= #1 1'b0;
143 
   tf1_0 <= #1 1'b0;
144 
 end else begin
145 
     case (tmod[1:0]) /* synopsys full_case parallel_case */
146 
      `OC8051_MODE0: begin                       // mode 0
147 
        tf1_0 <= #1 1'b0;
148 
        if (tc0_add)
149 
          {tf0, th0,tl0[4:0]} <= #1 {1'b0, th0, tl0[4:0]}+ 1'b1;
150 
      end
151 
      `OC8051_MODE1: begin                       // mode 1
152 
        tf1_0 <= #1 1'b0;
153 
        if (tc0_add)
154 
          {tf0, th0,tl0} <= #1 {1'b0, th0, tl0}+ 1'b1;
155 
      end
156 
 
157 
      `OC8051_MODE2: begin                       // mode 2
158 
        tf1_0 <= #1 1'b0;
159 
        if (tc0_add) begin
160 
          if (tl0 == 8'b1111_1111) begin
161 
            tf0 <=#1 1'b1;
162 
            tl0 <=#1 th0;
163 
           end
164 
          else begin
165 
            tl0 <=#1 tl0 + 8'h1;
166 
            tf0 <= #1 1'b0;
167 
          end
168 
        end
169 
      end
170 
      `OC8051_MODE3: begin                       // mode 3
171 
 
172 
         if (tc0_add)
173 
           {tf0, tl0} <= #1 {1'b0, tl0} +1'b1;
174 
 
175 
         if (tr1 & pres_ow)
176 
           {tf1_0, th0} <= #1 {1'b0, th0} +1'b1;
177 
 
178 
      end
179 
/*      default:begin
180 
        tf0 <= #1 1'b0;
181 
        tf1_0 <= #1 1'b0;
182 
      end*/
183 
    endcase
184 
 end
185 
end
186 
 
187 
//
188 
// TIMER COUNTER 1
189 
//
190 25 dinesha 
always @(posedge clk or negedge resetn)
191 2 dinesha 
begin
192 25 dinesha 
 if (resetn == 1'b0) begin
193 2 dinesha 
   tl1 <=#1 `OC8051_RST_TL1;
194 
   th1 <=#1 `OC8051_RST_TH1;
195 
   tf1_1 <= #1 1'b0;
196 
 end else if ((wr) & !(wr_bit) & (wr_addr==`OC8051_SFR_TL1)) begin
197 
   tl1 <= #1 data_in;
198 
   tf1_1 <= #1 1'b0;
199 
 end else if ((wr) & !(wr_bit) & (wr_addr==`OC8051_SFR_TH1)) begin
200 
   th1 <= #1 data_in;
201 
   tf1_1 <= #1 1'b0;
202 
 end else begin
203 
     case (tmod[5:4]) /* synopsys full_case parallel_case */
204 
      `OC8051_MODE0: begin                       // mode 0
205 
        if (tc1_add)
206 
          {tf1_1, th1,tl1[4:0]} <= #1 {1'b0, th1, tl1[4:0]}+ 1'b1;
207 
      end
208 
      `OC8051_MODE1: begin                       // mode 1
209 
        if (tc1_add)
210 
          {tf1_1, th1,tl1} <= #1 {1'b0, th1, tl1}+ 1'b1;
211 
      end
212 
 
213 
      `OC8051_MODE2: begin                       // mode 2
214 
        if (tc1_add) begin
215 
          if (tl1 == 8'b1111_1111) begin
216 
            tf1_1 <=#1 1'b1;
217 
            tl1 <=#1 th1;
218 
           end
219 
          else begin
220 
            tl1 <=#1 tl1 + 8'h1;
221 
            tf1_1 <= #1 1'b0;
222 
          end
223 
        end
224 
      end
225 
/*      default:begin
226 
        tf1_1 <= #1 1'b0;
227 
      end*/
228 
    endcase
229 
 end
230 
end
231 
 
232 
 
233 25 dinesha 
always @(posedge clk or negedge resetn)
234 
  if (resetn == 1'b0) begin
235 2 dinesha 
    t0_buff <= #1 1'b0;
236 
    t1_buff <= #1 1'b0;
237 
  end else begin
238 
    t0_buff <= #1 t0;
239 
    t1_buff <= #1 t1;
240 
  end
241 
endmodule

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.