Subversion Repositories open8_urisc

-- Copyright (c)2013 Jeremy Seth Henry

-- All rights reserved.

--

-- Redistribution and use in source and binary forms, with or without

-- modification, are permitted provided that the following conditions are met:

--     * Redistributions of source code must retain the above copyright

--       notice, this list of conditions and the following disclaimer.

--     * Redistributions in binary form must reproduce the above copyright

--       notice, this list of conditions and the following disclaimer in the

--       documentation and/or other materials provided with the distribution,

--       where applicable (as part of a user interface, debugging port, etc.)

--

-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY

-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY

-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

-- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

--

-- VHDL Units :  o8_alu16

-- Description:  Provides a mix of common 16-bit math functions to accelerate

--            :   math operations on the Open8 microprocessor core.

--

-- Notes      :  All output registers are updated by writing an instruction to

--            :   offset 0x1F.

--            :  The math unit is busy when the MSB of the status

--            :   register is high, and done/ready when it reads low.

--            :  Almost Equal checks to see if Addend 1 is no more, or less

--            :   addend 2 within the specified tolerance. For example,

--            :   addend_1 = 2 is almost equal to addend_2 = -1 with a

--            :   tolerance of 3, but not a tolerance of 1. Actual function is

--            :   AE = '1' when (A1 <= A2 + T) and (A1 >= A2 - T) else '0'

--            :   This is an inherently signed function.

--            : Signed Overflow/Underflow is logically equivalent to

--            :  S_Sum/Dif(16) xor S_Sum/Dif(15), since the apparent result

--            :  changes sign while the internal sign bit does not. For example

--            :  |8000| will result in (-)8000 due to the way the internal

--            :  logic handles sign extension. Thus, the O bit should be

--            :  checked when performing signed math

--            : Decimal Adjust converts the contents of a register into its BCD

--            :  equivalent. This can be used to get the base 10 representation

--            :  of a value for conversion to ASCII. There are two variants,

--            :  Byte and Word. Note that conversion times are fairly long,

--            :  since we are repeatedly issuing division commands, but it is

--            :  still faster than software emulation.

--            : The Byte conversion only operates on the lower 8 bits, and sets

--            :  the Z and N flags. The N flag is only set when SDAB is used

--            :  and the signed value of the register is negative. The O bit is

--            :  set if the upper byte of the register is non-zero, but does

--            :  not actually result in an calculation error.

--            :  Examples:

--            :  UDAB 0x00FE -> 0x0254, Flags -> 0x0

--            :  SDAB 0x00FE -> 0x0002, Flags -> 0x4

--            : The Word conversion uses the entire 16-bit word, and uses the

--            :  Flags register to hold the Tens of Thousands place. Note that

--            :  the N flag is still used for signed conversions, while it may

--            :  be used as a data bit for unsigned conversions.

--            :  Examples:

--            :  UDAW 0xD431 -> 0x4321, Flags -> 0x5 ('0', MSB, MSB-1, MSB-2)

--            :  SDAW 0xD431 -> 0x1216, Flags -> 0x5 ('0', N  , MSB  , MSB-1)

-- Register Map:

-- Offset  Bitfield Description                        Read/Write

--   0x00   AAAAAAAA Register 0 ( 7:0)                  (RW)

--   0x01   AAAAAAAA Register 0 (15:8)                  (RW)

--   0x02   AAAAAAAA Register 1 ( 7:0)                  (RW)

--   0x03   AAAAAAAA Register 1 (15:8)                  (RW)

--   0x04   AAAAAAAA Register 2 ( 7:0)                  (RW)

--   0x05   AAAAAAAA Register 2 (15:8)                  (RW)

--   0x06   AAAAAAAA Register 3 ( 7:0)                  (RW)

--   0x07   AAAAAAAA Register 3 (15:8)                  (RW)

--   0x08   AAAAAAAA Register 4 ( 7:0)                  (RW)

--   0x09   AAAAAAAA Register 4 (15:8)                  (RW)

--   0x0A   AAAAAAAA Register 5 ( 7:0)                  (RW)

--   0x0B   AAAAAAAA Register 5 (15:8)                  (RW)

--   0x0C   AAAAAAAA Register 6 ( 7:0)                  (RW)

--   0x0D   AAAAAAAA Register 6 (15:8)                  (RW)

--   0x0E   AAAAAAAA Register 7 ( 7:0)                  (RW)

--   0x0F   AAAAAAAA Register 7 (15:8)                  (RW)

--   0x10   -------- Reserved                           (--)

--   0x11   -------- Reserved                           (--)

--   0x12   -------- Reserved                           (--)

--   0x13   -------- Reserved                           (--)

--   0x14   -------- Reserved                           (--)

--   0x15   -------- Reserved                           (--)

--   0x16   -------- Reserved                           (--)

--   0x17   -------- Reserved                           (--)

--   0x18   -------- Reserved                           (--)

--   0x19   -------- Reserved                           (--)

--   0x1A   -------- Reserved                           (--)

--   0x1B   -------- Reserved                           (--)

--   0x1C   AAAAAAAA Tolerance  ( 7:0)                  (RW)

--   0x1D   AAAAAAAA Tolerance  (15:8)                  (RW)

--   0x1E   E---DCBA Status & Flags                     (RW)

--                   A = Zero Flag

--                   B = Carry Flag

--                   C = Negative Flag

--                   D = Overflow / Error Flag

--                   E = Busy Flag (1 = busy, 0 = idle)

--   0x1F   BBBBBAAA Instruction Register               (RW)

--                   A = Operand (register select)

--                   B = Opcode  (instruction select)

--

-- Instruction Map:

-- OP_T0X  "0000 0xxx" : Transfer R0 to Rx    R0      -> Rx (Sets Z,N)

-- OP_TX0  "0000 1xxx" : Transfer Rx to R0    Rx      -> R0 (Sets Z,N)

-- OP_CLR  "0001 0xxx" : Set Rx to 0          0x00    -> Rx (Sets Z,N)

--

-- OP_IDIV "0001 1xxx" : Integer Division     R0/Rx   -> Q:R0, R:Rx

--

-- OP_UMUL "0010 0xxx" : Unsigned Multiply    R0*Rx   -> R1:R0 (Sets Z)

-- OP_UADD "0010 1xxx" : Unsigned Addition    R0+Rx   -> R0 (Sets N,Z,C)

-- OP_UADC "0011 0xxx" : Unsigned Add w/Carry R0+Rx+C -> R0 (Sets N,Z,C)

-- OP_USUB "0011 1xxx" : Unsigned Subtraction R0-Rx   -> R0 (Sets N,Z,C)

-- OP_USBC "0100 0xxx" : Unsigned Sub w/Carry R0-Rx-C -> R0 (Sets N,Z,C)

-- OP_UCMP "0100 1xxx" : Unsigned Compare     R0-Rx - Sets N,Z,C only

--

-- OP_SMUL "0101 0xxx" : Signed Multiply      R0*Rx   -> R1:R0 (Sets N,Z)

-- OP_SADD "0101 1xxx" : Signed Addition      R0+Rx   -> R0 (Sets N,Z,O)

-- OP_SSUB "0110 0xxx" : Signed Subtraction   R0-Rx   -> R0 (Sets N,Z,O)

-- OP_SCMP "0110 1xxx" : Signed Compare       R0-Rx - Sets N,Z,O only

-- OP_SMAG "0111 0xxx" : Signed Magnitude     |Rx|    -> R0 (Sets Z,O)

-- OP_SNEG "0111 1xxx" : Signed Negation      -Rx     -> R0 (Sets N,Z,O)

--

-- OP_ACMP "1000 0xxx" : Signed Almost Equal (see description)

-- OP_SCRY "1000 1---" : Set the carry bit   (ignores operand)

--

-- OP_UDAB "1001 0xxx" : Decimal Adjust Byte (see description)

-- OP_SDAB "1001 1xxx" : Decimal Adjust Byte (see description)

-- OP_UDAW "1010 0xxx" : Decimal Adjust Word (see description)

-- OP_SDAW "1010 1xxx" : Decimal Adjust Word (see description)

-- OP_RSVD "1011 0---" : Reserved

-- OP_BSWP "1011 1xxx" : Byte Swap (Swaps upper and lower bytes)

-- OP_BOR  "1100 0xxx" : Bitwise Logical OR   Rx or  R0 -> R0

-- OP_BAND "1100 1xxx" : Bitwise Logical AND  Rx and R0 -> R0

-- OP_BXOR "1101 0xxx" : Bitwise Logical XOR  Rx xor R0 -> R0

--

-- OP_BINV "1101 1xxx" : Bitwise logical NOT #Rx      -> Rx

-- OP_BSFL "1110 0xxx" : Logical Shift Left   Rx<<1,0 -> Rx

-- OP_BROL "1110 1xxx" : Logical Rotate Left  Rx<<1,C -> Rx,C

-- OP_BSFR "1111 0xxx" : Logical Shift Right  0,Rx>>1 -> Rx

-- OP_BROR "1111 1xxx" : Logical Rotate Right C,Rx>>1 -> Rx,C

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_arith.all;

use ieee.std_logic_unsigned.all;

use ieee.std_logic_misc.all;

library work;

  use work.open8_pkg.all;

entity o8_alu16 is

generic(

  Reset_Level           : std_logic;

  Address               : ADDRESS_TYPE

);

port(

  Clock                 : in  std_logic;

  Reset                 : in  std_logic;

  --

  Bus_Address           : in  ADDRESS_TYPE;

  Wr_Enable             : in  std_logic;

  Wr_Data               : in  DATA_TYPE;

  Rd_Enable             : in  std_logic;

  Rd_Data               : out DATA_TYPE;

  Interrupt             : out std_logic

);

end entity;

architecture behave of o8_alu16 is

  -------------------------------------------------------------------

  -- Opcode Definitions (should match the table above)

  -- Register Manipulation

  constant OP_T0X       : std_logic_vector(4 downto 0) := "00000";

  constant OP_TX0       : std_logic_vector(4 downto 0) := "00001";

  constant OP_CLR       : std_logic_vector(4 downto 0) := "00010";

  -- Integer Division

  constant OP_IDIV      : std_logic_vector(4 downto 0) := "00011";

  -- Unsigned Math Operations

  constant OP_UMUL      : std_logic_vector(4 downto 0) := "00100";

  constant OP_UADD      : std_logic_vector(4 downto 0) := "00101";

  constant OP_UADC      : std_logic_vector(4 downto 0) := "00110";

  constant OP_USUB      : std_logic_vector(4 downto 0) := "00111";

  constant OP_USBC      : std_logic_vector(4 downto 0) := "01000";

  constant OP_UCMP      : std_logic_vector(4 downto 0) := "01001";

  -- Signed Math Operations

  constant OP_SMUL      : std_logic_vector(4 downto 0) := "01010";

  constant OP_SADD      : std_logic_vector(4 downto 0) := "01011";

  constant OP_SSUB      : std_logic_vector(4 downto 0) := "01100";

  constant OP_SCMP      : std_logic_vector(4 downto 0) := "01101";

  constant OP_SMAG      : std_logic_vector(4 downto 0) := "01110";

  constant OP_SNEG      : std_logic_vector(4 downto 0) := "01111";

  -- Signed Almost Equal

  constant OP_ACMP      : std_logic_vector(4 downto 0) := "10000";

  -- Carry Flag set/clear

  constant OP_SCRY      : std_logic_vector(4 downto 0) := "10001";

  -- (Un)Signed Decimal Adjust Byte

  constant OP_UDAB      : std_logic_vector(4 downto 0) := "10010";

  constant OP_SDAB      : std_logic_vector(4 downto 0) := "10011";

  -- (Un)Signed Decimal Adjust Word

  constant OP_UDAW      : std_logic_vector(4 downto 0) := "10100";

  constant OP_SDAW      : std_logic_vector(4 downto 0) := "10101";

  -- Reserved for future use

  constant OP_RSVD      : std_logic_vector(4 downto 0) := "10110";

  -- Byte Swap ( U <> L )

  constant OP_BSWP      : std_logic_vector(4 downto 0) := "10111";

  -- Bitwise Boolean Operations (two operand)

  constant OP_BOR       : std_logic_vector(4 downto 0) := "11000";

  constant OP_BAND      : std_logic_vector(4 downto 0) := "11001";

  constant OP_BXOR      : std_logic_vector(4 downto 0) := "11010";

  -- In-place Bitwise Boolean Operations (single operand)

  constant OP_BINV      : std_logic_vector(4 downto 0) := "11011";

  constant OP_BSFL      : std_logic_vector(4 downto 0) := "11100";

  constant OP_BROL      : std_logic_vector(4 downto 0) := "11101";

  constant OP_BSFR      : std_logic_vector(4 downto 0) := "11110";

  constant OP_BROR      : std_logic_vector(4 downto 0) := "11111";

  -------------------------------------------------------------------

  constant User_Addr    : std_logic_vector(15 downto 5):= Address(15 downto 5);

  alias Comp_Addr       is Bus_Address(15 downto 5);

  signal Reg_Addr       : std_logic_vector(4 downto 0);

  signal Addr_Match     : std_logic;

  signal Wr_En          : std_logic;

  signal Wr_Data_q      : DATA_TYPE;

  signal Rd_En          : std_logic;

  type REG_ARRAY is array( 0 to 7 ) of std_logic_vector(15 downto 0);

  signal regfile        : REG_ARRAY;

  signal Start          : std_logic;

  signal Opcode         : std_logic_vector(4 downto 0);

  signal Operand_Sel    : std_logic_vector(2 downto 0);

  signal Tolerance      : std_logic_vector(15 downto 0);

  signal High_Tol       : signed(16 downto 0);

  signal Low_Tol        : signed(16 downto 0);

  signal Almost_Equal   : std_logic;

  constant FLAG_Z       : integer := 0;

  constant FLAG_C       : integer := 1;

  constant FLAG_N       : integer := 2;

  constant FLAG_O       : integer := 3;

  signal Flags          : std_logic_vector(3 downto 0);

  type ALU_STATES is ( IDLE, LOAD, EXECUTE,   IDIV_INIT, IDIV_WAIT,

                       DAW_INIT,   DAB_INIT,  DAA_WAIT1, DAA_STEP2,

                       DAA_WAIT2,  DAA_STEP3, DAA_WAIT3, DAA_STEP4,

                       STORE );

  signal alu_ctrl       : ALU_STATES;

  signal Busy           : std_logic;

  signal Busy_q         : std_logic;

  signal Operand_1      : std_logic_vector(15 downto 0);

  signal Operand_2      : std_logic_vector(15 downto 0);

  alias  Dividend       is Operand_1;

  alias  Divisor        is Operand_2;

  alias  u_Operand_1    is Operand_1;

  alias  u_Operand_2    is Operand_2;

  alias  u_Addend_1     is Operand_1;

  alias  u_Addend_2     is Operand_2;

  signal s_Operand_1    : signed(16 downto 0);

  signal s_Operand_2    : signed(16 downto 0);

  alias  s_Addend_1     is S_Operand_1;

  alias  s_Addend_2     is S_Operand_2;

  signal u_accum        : std_logic_vector(16 downto 0);

  alias  u_data         is u_accum(15 downto 0);

  alias  u_sign         is u_accum(15);

  alias  u_carry        is u_accum(16);

  signal u_prod         : std_logic_vector(31 downto 0);

  signal s_accum        : signed(16 downto 0);

  alias  s_data         is s_accum(15 downto 0);

  alias  s_sign         is s_accum(15);

  alias  s_ovf          is s_accum(16);

  signal s_prod         : signed(33 downto 0);

  signal IDIV_Start     : std_logic;

  signal IDIV_Busy      : std_logic;

  constant N            : integer := 16; -- Width of Operands

  signal q              : std_logic_vector(N*2-1 downto 0);

  signal diff           : std_logic_vector(N downto 0);

  signal count          : integer range 0 to N + 1;

  signal Quotient_i     : std_logic_vector(15 downto 0);

  signal Quotient       : std_logic_vector(15 downto 0);

  signal Remainder_i    : std_logic_vector(15 downto 0);

  signal Remainder      : std_logic_vector(15 downto 0);

  signal DAA_intreg     : std_logic_vector(15 downto 0);

  signal DAA_mode       : std_logic;

  signal DAA_sign       : std_logic;

  signal DAA_p4         : std_logic_vector(3 downto 0);

  signal DAA_p3         : std_logic_vector(3 downto 0);

  signal DAA_p2         : std_logic_vector(3 downto 0);

  alias  DAA_p1         is Quotient(3 downto 0);

  alias  DAA_p0         is Remainder(3 downto 0);

  signal DAA_result     : std_logic_vector(19 downto 0);

begin

  Addr_Match            <= '1' when Comp_Addr = User_Addr else '0';

  -- Sign-extend the base operands to created operands for signed math

  S_Operand_1           <= signed(Operand_1(15) & Operand_1);

  S_Operand_2           <= signed(Operand_2(15) & Operand_2);

  -- Compute the tolerance bounds for the Almost Equal function

  High_Tol              <= S_Operand_2 + signed('0' & Tolerance);

  Low_Tol               <= S_Operand_2 - signed('0' & Tolerance);

  -- Combinational logic for the Decimal Adjust logic

  DAA_result            <= DAA_p4 & DAA_p3 & DAA_p2 & DAA_p1 & DAA_p0;

  -- Combinational logic for the division logic

  diff                  <= ('0' & Q(N*2-2 downto N-1)) - ('0' & Divisor);

  Quotient_i            <= q(N-1 downto 0);

  Remainder_i           <= q(N*2-1 downto N);

  ALU_proc: process( Clock, Reset )

    variable Reg_Sel    : integer;

    variable Oper_Sel   : integer;

  begin

    if( Reset = Reset_Level )then

      Wr_En             <= '0';

      Wr_Data_q         <= (others => '0');

      Rd_En             <= '0';

      Rd_Data           <= (others => '0');

      Reg_Addr          <= (others => '0');

      Opcode            <= (others => '0');

      Operand_Sel       <= (others => '0');

      Tolerance         <= (others => '0');

      Start             <= '0';

      Busy_q            <= '0';

      Interrupt         <= '0';

      for i in 0 to 7 loop

        regfile(i)      <= (others => '0');

      end loop;

      alu_ctrl          <= IDLE;

      Operand_1         <= (others => '0');

      Operand_2         <= (others => '0');

      u_accum           <= (others => '0');

      u_prod            <= (others => '0');

      s_accum           <= (others => '0');

      s_prod            <= (others => '0');

      Quotient          <= (others => '0');

      Remainder         <= (others => '0');

      Flags             <= (others => '0');

      Almost_Equal      <= '0';

      Busy              <= '0';

      DAA_mode          <= '0';

      DAA_sign          <= '0';

      DAA_intreg        <= (others => '0');

      DAA_p4            <= (others => '0');

      DAA_p3            <= (others => '0');

      DAA_p2            <= (others => '0');

      IDIV_Start        <= '0';

      q                 <= (others => '0');

      count             <= N;

      IDIV_Busy         <= '0';

    elsif( rising_edge(Clock) )then

      -- For convenience, convert these to integers and assign them to

      --  variables

      Reg_Sel           := conv_integer(Reg_Addr(3 downto 1));

      Oper_Sel          := conv_integer(Operand_Sel);

      Wr_En             <= Addr_Match and Wr_Enable;

      Wr_Data_q         <= Wr_Data;

      Reg_Addr          <= Bus_Address(4 downto 0);

      Start             <= '0';

      if( Wr_En = '1' )then

        case( Reg_Addr )is

          -- Even addresses go to the lower byte of the register

          when "00000" | "00010" | "00100" | "00110" |

               "01000" | "01010" | "01100" | "01110" =>

            regfile(Reg_Sel)(7 downto 0) <= Wr_Data_q;

          -- Odd addresses go to the upper byte of the register

          when "00001" | "00011" | "00101" | "00111" |

               "01001" | "01011" | "01101" | "01111" =>

            regfile(Reg_Sel)(15 downto 8)<= Wr_Data_q;

          when "11100" => -- 0x1C -> Tolerance.l

            Tolerance(7 downto 0) <= Wr_Data_q;

          when "11101" => -- 0x1D -> Tolerance.u

            Tolerance(15 downto 8) <= Wr_Data_q;

          when "11110" => -- 0x1E -> Status register

            null;

          when "11111" => -- 0x1F -> Control register

            Start       <= '1';

            Opcode      <= Wr_Data_q(7 downto 3);

            Operand_Sel <= Wr_Data_q(2 downto 0);

          when others => null;

        end case;

      end if;

      Rd_Data           <= (others => '0');

      Rd_En             <= Addr_Match and Rd_Enable;

      if( Rd_En = '1' )then

        case( Reg_Addr )is

          when "00000" | "00010" | "00100" | "00110" |

               "01000" | "01010" | "01100" | "01110" =>

            Rd_Data  <= regfile(Reg_Sel)(7 downto 0);

          when "00001" | "00011" | "00101" | "00111" |

               "01001" | "01011" | "01101" | "01111" =>

            Rd_Data  <= regfile(Reg_Sel)(15 downto 8);

          when "11100" => -- 0x1C -> Tolerance.l

            Rd_Data  <= Tolerance(7 downto 0);

          when "11101" => -- 0x1D -> Tolerance.u

            Rd_Data  <= Tolerance(15 downto 8);

          when "11110" => -- 0x1E -> Flags & Status register

            Rd_Data  <= Busy & "000" & Flags;

          when "11111" => -- 0x1F -> Control register

            Rd_Data  <= Opcode & Operand_Sel;

          when others => null;

        end case;

      end if;

      Busy              <= '1';

      IDIV_Start        <= '0';

      case( alu_ctrl )is

        when IDLE =>

          Busy          <= '0';

          if( Start = '1' )then

            alu_ctrl    <= LOAD;

          end if;

        -- Load the operands from the register file. We also check for specific

        --  opcodes to set the DAA mode (signed vs unsigned). This is the only

        --  place where we READ the register file outside of the bus interface

        when LOAD =>

          Operand_1     <= regfile(0);

          Operand_2     <= regfile(Oper_Sel);

          DAA_mode      <= '0';

          if( Opcode = OP_SDAW or Opcode = OP_SDAB )then

            DAA_mode    <= '1';

          end if;

          alu_ctrl      <= EXECUTE;

        -- Now that the operands are loaded, we can execute the actual math

        --  operations. We do it with separate operand registers to pipeline

        --  the logic.

        when EXECUTE =>

          alu_ctrl      <= STORE;

          case( Opcode)is

            when OP_T0X =>

              u_accum   <= '0' & Operand_1;

            when OP_TX0 =>

              u_accum   <= '0' & Operand_2;

            when OP_CLR | OP_SCRY =>

              u_accum   <= (others => '0');

            when OP_BSWP =>

              u_accum   <= '0' &

                           Operand_2(7 downto 0) &

                           Operand_2(15 downto 8);

            when OP_SMAG =>

              s_accum   <= S_Operand_2;

              if( S_Operand_2 < 0)then

                s_accum <= -S_Operand_2;

              end if;

            when OP_SNEG =>

              s_accum   <= -S_Operand_2;

            when OP_SMUL =>

              s_prod    <= S_Operand_1 * S_Operand_2;

            when OP_UMUL =>

              u_prod    <= U_Operand_1 * U_Operand_2;

            when OP_SADD =>

              s_accum   <= S_Addend_1  + S_Addend_2;

            when OP_UADD =>

              u_accum   <= ('0' & Operand_1) + ('0' & Operand_2);

            when OP_UADC =>

              u_accum   <= ('0' & Operand_1) + ('0' & Operand_2) + Flags(FLAG_C);

            when OP_SSUB | OP_SCMP =>

              s_accum   <= S_Addend_1  - S_Addend_2;

            when OP_USUB | OP_UCMP =>

              u_accum   <= ('0' & U_Addend_1)  - ('0' & U_Addend_2);

            when OP_USBC =>

              u_accum   <= ('0' & U_Addend_1)  - ('0' & U_Addend_2) - Flags(FLAG_C);

            when OP_ACMP =>

              -- Perform the function

              -- AE = '1' when (A1 <= A2 + T) and (A1 >= A2 - T) else '0'

              Almost_Equal    <= '0';

              if( (S_Addend_1 <= High_Tol) and

                  (S_Addend_1 >= Low_Tol) )then

                Almost_Equal  <= '1';

              end if;

            when OP_BINV =>

              u_accum    <= '0' & (not U_Operand_1);

            when OP_BSFL =>

              u_accum    <= U_Operand_1 & '0';

            when OP_BROL =>

              u_accum    <= U_Operand_1 & Flags(FLAG_C);

            when OP_BSFR =>

              u_accum    <= "00" & U_Operand_1(15 downto 1);

            when OP_BROR =>

              u_accum    <= U_Operand_1(0) & Flags(FLAG_C) &

                            U_Operand_1(15 downto 1);

            when OP_BOR  =>

              u_accum    <= '0' & (U_Operand_1 or U_Operand_2);

            when OP_BAND =>

              u_accum    <= '0' & (U_Operand_1 and U_Operand_2);

            when OP_BXOR =>

              u_accum    <= '0' & (U_Operand_1 xor U_Operand_2);

         -- Division unit has a longer latency, so we need to wait for its busy

         --  signal to return low before storing results. Trigger the engine,

         --  and then jump to the wait state for it to finish

            when OP_IDIV =>

              IDIV_Start<= '1';

              alu_ctrl  <= IDIV_INIT;

        -- Decimal Adjust Word initialization

        --  Stores the sign bit for later use setting the N flag

        --  Assigns Operand_1 to register as-is

        --  If the sign bit is set, do a 2's complement of the register

            when OP_UDAW | OP_SDAW =>

              IDIV_Start<= '1';

              DAA_sign  <= Operand_2(15);

              Operand_1 <= Operand_2;

              if( (Operand_2(15) and DAA_mode) = '1' )then

                Operand_1 <= (not Operand_2) + 1;

              end if;

              Operand_2 <= x"2710";

              alu_ctrl  <= DAW_INIT;

        -- Decimal Adjust Byte initialization

        --  Stores the sign bit for later use setting the N flag

        --  Assigns Operand_1 to the lower byte of the register

        --  If the sign bit is set, do a 2's complement of the register

            when OP_UDAB | OP_SDAB =>

              IDIV_Start<= '1';

              DAA_p4    <= (others => '0');

              DAA_p3    <= (others => '0');

              DAA_sign  <= Operand_2(7);

              Operand_1 <= x"00" & Operand_2(7 downto 0);

              if( (Operand_2(7) and DAA_mode) = '1' )then

                Operand_1 <= ((not Operand_2) + 1) and x"00FF";

              end if;

              Operand_2 <= x"0064";

              alu_ctrl  <= DAB_INIT;

            when others => null;

          end case;

        -- These three states look superfluous, but simplify the state machine

        --  logic enough to improve performance. Leave them.

        when IDIV_INIT =>

          if( IDIV_Busy = '1' )then

            alu_ctrl    <= IDIV_WAIT;

          end if;

        when DAW_INIT =>

          if( IDIV_Busy = '1' )then

            alu_ctrl    <= DAA_WAIT1;

          end if;

        when DAB_INIT =>

          if( IDIV_Busy = '1' )then

            alu_ctrl    <= DAA_WAIT3;

          end if;

        when DAA_WAIT1 =>

          if( IDIV_Busy = '0' )then

            DAA_p4      <= Quotient_i(3 downto 0);

            DAA_intreg  <= Remainder_i;

            alu_ctrl    <= DAA_STEP2;

          end if;

        when DAA_STEP2 =>

          Operand_1     <= DAA_intreg;

          Operand_2     <= x"03E8";

          IDIV_Start    <= '1';

          if( IDIV_Busy = '1' )then

            alu_ctrl    <= DAA_WAIT2;

          end if;

        when DAA_WAIT2 =>

          if( IDIV_Busy = '0' )then

            DAA_p3      <= Quotient_i(3 downto 0);

            DAA_intreg  <= Remainder_i;

            alu_ctrl    <= DAA_STEP3;