Subversion Repositories open8_urisc

-- Copyright (c)2013, 2020 Jeremy Seth Henry

-- All rights reserved.

--

-- Redistribution and use in source and binary forms, with or without

-- modification, are permitted provided that the following conditions are met:

--     * Redistributions of source code must retain the above copyright

--       notice, this list of conditions and the following disclaimer.

--     * Redistributions in binary form must reproduce the above copyright

--       notice, this list of conditions and the following disclaimer in the

--       documentation and/or other materials provided with the distribution,

--       where applicable (as part of a user interface, debugging port, etc.)

--

-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY

-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY

-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

--

-- VHDL Units :  o8_clk_detect

-- Description:  Provides up/down status and interrupt for monitoring a clock

--

-- Register Map:

-- Offset  Bitfield Description                          Read/Write

--  0x00   BA------ Recieve Clock Status                   (RO)

--                    A = Clock Line State (follows input)

--                    B = Clock Detect (1 = transition detected)

--

-- Revision History

-- Author          Date     Change

------------------ -------- ---------------------------------------------------

-- Seth Henry      04/16/20 Revision block added

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_unsigned.all;

use ieee.std_logic_arith.all;

use ieee.std_logic_misc.all;

library work;

  use work.open8_pkg.all;

entity o8_clk_detect is

generic(

  Threshold_Count            : integer;

  Address                    : ADDRESS_TYPE

);

port(

  Ref_Clk_In                 : in  std_logic;

  --

  Open8_Bus                  : in  OPEN8_BUS_TYPE;

  Rd_Data                    : out DATA_TYPE;

  Interrupt                  : out std_logic

);

end entity;

architecture behave of o8_clk_detect is

  alias Clock                is Open8_Bus.Clock;

  alias Reset                is Open8_Bus.Reset;

  constant User_Addr         : std_logic_vector(15 downto 0) := Address;

  alias  Comp_Addr           is Open8_Bus.Address(15 downto 0);

  signal Addr_Match          : std_logic := '0';

  signal Rd_En_d             : std_logic := '0';

  signal Rd_En_q             : std_logic := '0';

  constant Threshold_bits    : integer := ceil_log2(Threshold_Count);

  constant THRESHOLD         : std_logic_vector(Threshold_bits - 1 downto 0) :=

                        conv_std_logic_vector(Threshold_Count,Threshold_bits);

  signal RE_Threshold_Ctr    : std_logic_vector(Threshold_Bits - 1 downto 0) :=

                                (others => '0');

  signal FE_Threshold_Ctr    : std_logic_vector(Threshold_Bits - 1 downto 0) :=

                                (others => '0');

  signal Ref_In_SR           : std_logic_vector(3 downto 0) := (others => '0');

  alias  Ref_In_q1           is Ref_In_SR(2);

  alias  Ref_In_q2           is Ref_In_SR(3);

  signal Ref_In_RE           : std_logic := '0';

  signal Ref_In_FE           : std_logic := '0';

  signal Ref_Detect          : std_logic := '0';

  signal Ref_Detect_q1       : std_logic := '0';

  signal Ref_Detect_CoS      : std_logic := '0';

begin

  Addr_Match                 <= '1' when Comp_Addr = User_Addr else '0';

  Rd_En_d                    <= Addr_Match and Open8_Bus.Rd_En;

  io_reg: process( Clock, Reset )

  begin

    if( Reset = Reset_Level )then

      Rd_En_q                <= '0';

      Rd_Data                <= OPEN8_NULLBUS;

    elsif( rising_edge( Clock ) )then

      Rd_En_q                <= Rd_En_d;

      Rd_Data                <= OPEN8_NULLBUS;

      if( Rd_En_q = '1' )then

        Rd_Data(6)           <= Ref_In_q2;

        Rd_Data(7)           <= Ref_Detect;

      end if;

    end if;

  end process;

  Detect_proc: process( Clock, Reset )

  begin

    if( Reset = Reset_Level )then

      Ref_In_SR              <= (others => '0');

      Ref_In_RE              <= '0';

      Ref_In_FE              <= '0';

      RE_Threshold_Ctr       <= (others => '0');

      FE_Threshold_Ctr       <= (others => '0');

      Ref_Detect             <= '0';

      Interrupt              <= '0';

    elsif( rising_edge(Clock) )then

      Ref_In_SR              <= Ref_In_SR(2 downto 0) & Ref_Clk_In;

      Ref_In_RE              <= Ref_In_q1 and (not Ref_In_q2);

      Ref_In_FE              <= (not Ref_In_q1) and Ref_In_q2;

      RE_Threshold_Ctr       <= RE_Threshold_Ctr - 1;

      if( Ref_In_RE = '1' )then

        RE_Threshold_Ctr     <= THRESHOLD;

      elsif( or_reduce(RE_Threshold_Ctr) = '0' )then

        RE_Threshold_Ctr     <= (others => '0');

      end if;

      FE_Threshold_Ctr       <= FE_Threshold_Ctr - 1;

      if( Ref_In_FE = '1' )then

        FE_Threshold_Ctr     <= THRESHOLD;

      elsif( or_reduce(FE_Threshold_Ctr) = '0' )then

        FE_Threshold_Ctr     <= (others => '0');

      end if;

      Ref_Detect             <= or_reduce(RE_Threshold_Ctr) and

                                or_reduce(FE_Threshold_Ctr);

      Ref_Detect_q1          <= Ref_Detect;

      Ref_Detect_CoS         <= Ref_Detect xor Ref_Detect_q1;

      Interrupt              <= Ref_Detect_CoS;

    end if;

  end process;

end architecture;