Subversion Repositories open8_urisc

-- Copyright (c)2011, 2019 Jeremy Seth Henry

-- All rights reserved.

--

-- Redistribution and use in source and binary forms, with or without

-- modification, are permitted provided that the following conditions are met:

--     * Redistributions of source code must retain the above copyright

--       notice, this list of conditions and the following disclaimer.

--     * Redistributions in binary form must reproduce the above copyright

--       notice, this list of conditions and the following disclaimer in the

--       documentation and/or other materials provided with the distribution,

--       where applicable (as part of a user interface, debugging port, etc.)

--

-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY

-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY

-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

--

-- VHDL Units :  o8_gpin

-- Description:  Provides a single 8-bit input register

--

-- Note: Cut the path between GPIN and GPIN_q1 for timing analysis

--

-- Revision History

-- Author          Date     Change

------------------ -------- ---------------------------------------------------

-- Seth Henry      07/28/11 Design Start

-- Seth Henry      12/19/19 Renamed to "o8_gpin" to fit "theme"

-- Seth Henry      12/20/19 Added metastability registers

-- Seth Henry      04/10/20 Code Cleanup

-- Seth Henry      04/16/20 Modified to make use of Open8 bus record

library ieee;

use ieee.std_logic_1164.all;

library work;

  use work.open8_pkg.all;

entity o8_gpin is

generic(

  Address                    : ADDRESS_TYPE

);

port(

  Open8_Bus                  : in  OPEN8_BUS_TYPE;

  Rd_Data                    : out DATA_TYPE;

  --

  GPIN                       : in  DATA_TYPE

);

end entity;

architecture behave of o8_gpin is

  alias Clock                is Open8_Bus.Clock;

  alias Reset                is Open8_Bus.Reset;

  constant User_Addr         : std_logic_vector(15 downto 0) := Address;

  alias  Comp_Addr           is Open8_Bus.Address(15 downto 0);

  signal Addr_Match          : std_logic;

  signal Rd_En_d             : std_logic := '0';

  signal Rd_En_q             : std_logic := '0';

  signal GPIN_q1             : DATA_TYPE;

  signal GPIN_q2             : DATA_TYPE;

  signal User_In             : DATA_TYPE;

begin

  Addr_Match                 <= '1' when Comp_Addr = User_Addr else '0';

  Rd_En_d                    <= Addr_Match and Open8_Bus.Rd_En;

  io_reg: process( Clock, Reset )

  begin

    if( Reset = Reset_Level )then

      Rd_En_q                <= '0';

      Rd_Data                <= OPEN8_NULLBUS;

      GPIN_q1                <= x"00";

      GPIN_q2                <= x"00";

      User_In                <= x"00";

    elsif( rising_edge( Clock ) )then

      GPIN_q1                <= GPIN;

      GPIN_q2                <= GPIN_q1;

      User_In                <= GPIN_q2;

      Rd_Data                <= OPEN8_NULLBUS;

      Rd_En_q                <= Rd_En_d;

      if( Rd_En_q = '1' )then

        Rd_Data              <= User_In;

      end if;

    end if;

  end process;

end architecture;