Subversion Repositories open8_urisc

-- Copyright (c)2013, 2020 Jeremy Seth Henry

-- All rights reserved.

--

-- Redistribution and use in source and binary forms, with or without

-- modification, are permitted provided that the following conditions are met:

--     * Redistributions of source code must retain the above copyright

--       notice, this list of conditions and the following disclaimer.

--     * Redistributions in binary form must reproduce the above copyright

--       notice, this list of conditions and the following disclaimer in the

--       documentation and/or other materials provided with the distribution,

--       where applicable (as part of a user interface, debugging port, etc.)

--

-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY

-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY

-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

--

-- VHDL Units :  o8_gpio

-- Description:  Provides a single 8-bit GPIO register

--

-- Register Map:

-- Offset  Bitfield Description                        Read/Write

--   0x00  AAAAAAAA Output Register                       (RW)

--   0x01  AAAAAAAA Direction Register                    (RW)

--   0x03  AAAAAAAA Input Register                        (RO)

--

-- Revision History

-- Author          Date     Change

------------------ -------- ---------------------------------------------------

-- Seth Henry      12/20/13 Design Start

-- Seth Henry      04/10/20 Code cleanup and register documentation

--                          Also removed "input only" generic, as there is a

--                           separate module for that

-- Seth Henry      04/16/20 Modified to make use of Open8 bus record

-- Seth Henry      05/18/20 Added write qualification input

library ieee;

use ieee.std_logic_1164.all;

library work;

  use work.open8_pkg.all;

entity o8_gpio is

generic(

  Default_Out                : DATA_TYPE := x"00";

  Default_En                 : DATA_TYPE := x"00";

  Address                    : ADDRESS_TYPE

);

port(

  Open8_Bus                  : in  OPEN8_BUS_TYPE;

  Write_Qual                 : in  std_logic := '1';

  Rd_Data                    : out DATA_TYPE;

  --

  GPIO                       : inout DATA_TYPE

);

end entity;

architecture behave of o8_gpio is

  alias Clock                is Open8_Bus.Clock;

  alias Reset                is Open8_Bus.Reset;

  constant User_Addr         : std_logic_vector(15 downto 2)

                               := Address(15 downto 2);

  alias  Comp_Addr           is Open8_Bus.Address(15 downto 2);

  signal Addr_Match          : std_logic;

  alias  Reg_Sel_d           is Open8_Bus.Address(1 downto 0);

  signal Reg_Sel_q           : std_logic_vector(1 downto 0) := "00";

  signal Wr_En_d             : std_logic := '0';

  signal Wr_En_q             : std_logic := '0';

  alias  Wr_Data_d           is Open8_Bus.Wr_Data;

  signal Wr_Data_q           : DATA_TYPE := x"00";

  signal Rd_En_d             : std_logic := '0';

  signal Rd_En_q             : std_logic := '0';

  signal User_Out            : DATA_TYPE := x"00";

  signal User_En             : DATA_TYPE := x"00";

  signal User_In             : DATA_TYPE := x"00";

begin

  Addr_Match                 <= '1' when Comp_Addr = User_Addr else '0';

  Wr_En_d                    <= Addr_Match and Open8_Bus.Wr_En and Write_Qual;

  Rd_En_d                    <= Addr_Match and Open8_Bus.Rd_En;

  io_reg: process( Clock, Reset )

  begin

    if( Reset = Reset_Level )then

      Reg_Sel_q              <= "00";

      Wr_En_q                <= '0';

      Wr_Data_q              <= x"00";

      Rd_En_q                <= '0';

      Rd_Data                <= OPEN8_NULLBUS;

      User_Out               <= Default_Out;

      User_En                <= Default_En;

    elsif( rising_edge( Clock ) )then

      Reg_Sel_q              <= Reg_Sel_d;

      Wr_En_q                <= Wr_En_d;

      Wr_Data_q              <= Wr_Data_d;

      if( Wr_En_q = '1' )then

        case( Reg_Sel_q )is

          when "00" =>

            User_Out         <= Wr_Data_q;

          when "01" =>

            User_En          <= Wr_Data_q;

          when others => null;

        end case;

      end if;

      User_In                <= GPIO;

      Rd_En_q                <= Rd_En_d;

      Rd_Data                <= OPEN8_NULLBUS;

      if( Rd_En_q = '1' )then

        case( Reg_Sel_q )is

          when "00" =>

            Rd_Data          <= User_Out;

          when "01" =>

            Rd_Data          <= User_En;

          when "10" =>

            Rd_Data          <= User_In;

          when others => null;

        end case;

      end if;

    end if;

  end process;

  Output_Ctl_proc: process( User_Out, User_En )

  begin

    for i in 0 to 7 loop

      GPIO(i)                <= 'Z';

      if( User_En(i) = '1' )then

        GPIO(i)              <= User_Out(i);

      end if;

    end loop;

  end process;

end architecture;