Subversion Repositories open8_urisc

-- Copyright (c)2018, 2020 Jeremy Seth Henry

-- All rights reserved.

--

-- Redistribution and use in source and binary forms, with or without

-- modification, are permitted provided that the following conditions are met:

--     * Redistributions of source code must retain the above copyright

--       notice, this list of conditions and the following disclaimer.

--     * Redistributions in binary form must reproduce the above copyright

--       notice, this list of conditions and the following disclaimer in the

--       documentation and/or other materials provided with the distribution,

--       where applicable (as part of a user interface, debugging port, etc.)

--

-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY

-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY

-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

--

-- VHDL Units :  o8_register

-- Description:  Provides a byte of pseudo-random data on every read

--

-- Register Map:

-- Offset  Bitfield Description                        Read/Write

--   0x00  AAAAAAAA Data output                          (RW)

--

-- Revision History

-- Author          Date     Change

------------------ -------- ---------------------------------------------------

-- Seth Henry      04/25/18 Design Start

-- Seth Henry      04/10/20 Code cleanup and comments

library ieee;

  use ieee.std_logic_1164.all;

  use ieee.std_logic_misc.all;

library work;

  use work.open8_pkg.all;

entity o8_lfsr32 is

generic(

  Init_Seed                  : std_logic_vector(31 downto 0) := x"CAFEBABE";

  Reset_Level                : std_logic;

  Address                    : ADDRESS_TYPE

);

port(

  Clock                      : in  std_logic;

  Reset                      : in  std_logic;

  --

  Bus_Address                : in  ADDRESS_TYPE;

  Rd_Enable                  : in  std_logic;

  Rd_Data                    : out DATA_TYPE

);

end entity;

architecture behave of o8_lfsr32 is

  constant User_Addr         : std_logic_vector(15 downto 1)

                               := Address(15 downto 1);

  alias  Comp_Addr           is Bus_Address(15 downto 1);

  alias  Reg_Sel             is Bus_Address(0);

  signal Reg_Sel_q           : std_logic := '0';

  signal Addr_Match          : std_logic := '0';

  signal Rd_En               : std_logic := '0';

  signal d0                  : std_logic := '0';

  signal lfsr                : std_logic_vector(31 downto 0) := x"00000000";

  signal lfsr_q              : std_logic_vector(31 downto 0) := x"00000000";

begin

  Addr_Match                 <= Rd_Enable when Comp_Addr = User_Addr else '0';

  d0                         <= lfsr(31) xnor lfsr(21) xnor lfsr(1) xnor lfsr(0);

  lfsr_proc: process( Clock, Reset )

  begin

    if( Reset = Reset_Level )then

      Reg_Sel_q              <= '0';

      Rd_En                  <= '0';

      Rd_Data                <= x"00";

      lfsr                   <= Init_Seed;

      lfsr_q                 <= x"00000000";

    elsif( rising_edge(Clock) )then

      Rd_Data                <= x"00";

      Reg_Sel_q              <= Reg_Sel;

      Rd_En                  <= Addr_Match;

      if( Rd_En = '1' )then

        Rd_Data              <= lfsr_q(31 downto 24);

        lfsr_q               <= lfsr_q(23 downto 0) & x"00";

        if( Reg_Sel_q = '1' )then

          Rd_Data            <= lfsr_q(31) & "0000000";

          lfsr_q             <= lfsr_q(30 downto 0) & '0';

        end if;

      end if;

      if( or_reduce(lfsr_q) = '0' )then

        lfsr_q               <= lfsr;

        lfsr                 <= lfsr(30 downto 0) & d0;

      end if;

    end if;

  end process;

end architecture;